Simulation of academic performance rates, estimation of indicators of subjects and of a complete degree

The purpose of this paper is to present a program written in Matlab-Octave for the simulation of the time evolution of student curricula, i.e, how students pass their subjects along time until graduation. The program computes, from the simulations, the academic performance rates for the subjects of the study plan for each semester as well as the overall rates, which are a) the efficiency rate defined as the ratio of the number of students passing the exam to the number of students who registered for it and b) the success rate, defined as the ratio of the number of students passing the exam to the number of students who not only registered for it but also actually took it. Additionally, we compute the rates for the bachelor academic degree which are established for Spain by the National Quality Evaluation and Accreditation Agency (ANECA) and which are the graduation rate (measured as the percentage of students who finish as scheduled in the plan or taking an extra year) and the efficiency rate (measured as the percentage of credits which a student who graduated has really taken). The simulation is done in terms of the probabilities of passing all the subjects in their study plan. The application of the simulator to Polytech students in Madrid, where requirements for passing are specially stiff in first and second year subjects, is particularly relevant to analyze student cohorts and the probabilities of students finishing in the minimum of four years, or taking and extra year or two extra years, and so forth. It is a very useful tool when designing new study plans. The calculation of the probability distribution of the random variable "number of semesters a student has taken to complete the curricula and graduate" is difficult or even unfeasible to obtain analytically, and this is even truer when we incorporate uncertainty in parameter estimation. This is why we apply Monte Carlo simulation which not only provides illustration of the stochastic process but also a method for computation. The stochastic simulator is proving to be a useful tool for identification of the subjects most critical in the distribution of the number of semesters for curriculum vitae (CV) completion and subsequently for a decision making process in terms of CV planning and passing standards in the University. Simulations are performed through a graphical interface where also the results are presented in appropriate figures. The Project has been funded by the Call for Innovation in Education Projects of Universidad Politécnica de Madrid (UPM) through a Project of its school Escuela Técnica Superior de Ingenieros Industriales ETSII during the period September 2010-September 2011.

Mapping the visual landscape quality in Europe using physical attributes

he inclusion of environmental care data in the decision-making process should be based on the results obtained after scienti?cally evaluating different environmental variables. Herein, a European landscape geographic model is presented. This landscape map would allow the environmental care variable ?visual landscape?, along with other information related to vegetation, geology, soils, cultural variables, etc., to be integrated into the planning process. The methodology used is not new since it has already been tested in Spain by the authors. Nevertheless, the model was adapted to cope with the much more extensive territory of the European Union. This meant dealing with computational dif?culties, and a lack of information. The result of this work is a raster map (100 m cell size) that evaluates landscape quality in Europe by dividing the area into seven visual quality classes. This is a practical tool for territorial development that will facilitate the environmental assessment of plans, such as infrastructure plans, within a strategic pan-European framework.

Integración de la calidad del aire en la planificación física

En esta tesis se presenta una nueva aproximación para la realización de mapas de calidad del aire, con objeto de que esta variable del medio físico pueda ser tenida en cuenta en los procesos de planificación física o territorial. La calidad del aire no se considera normalmente en estos procesos debido a su composición y a la complejidad de su comportamiento, así como a la dificultad de contar con información fiable y contrastada. Además, la variabilidad espacial y temporal de las medidas de calidad del aire hace que sea difícil su consideración territorial y exige la georeferenciación de la información. Ello implica la predicción de medidas para lugares del territorio donde no existen datos. Esta tesis desarrolla un modelo geoestadístico para la predicción de valores de calidad del aire en un territorio. El modelo propuesto se basa en la interpolación de las medidas de concentración de contaminantes registradas en las estaciones de monitorización, mediante kriging ordinario, previa homogeneización de estos datos para eliminar su carácter local. Con el proceso de eliminación del carácter local, desaparecen las tendencias de las series muestrales de datos debidas a las variaciones temporales y espaciales de la calidad del aire. La transformación de los valores de calidad del aire en cantidades independientes del lugar de muestreo, se realiza a través de parámetros de uso del suelo y de otras variables características de la escala local. Como resultado, se obtienen unos datos de entrada espacialmente homogéneos, que es un requisito fundamental para la utilización de cualquier algoritmo de interpolación, en concreto, del kriging ordinario. Después de la interpolación, se aplica una retransformación de los datos para devolver el carácter local al mapa final. Para el desarrollo del modelo, se ha elegido como área de estudio la Comunidad de Madrid, por la disponibilidad de datos reales. Estos datos, valores de calidad del aire y variables territoriales, se utilizan en dos momentos. Un momento inicial, donde se optimiza la selección de los parámetros más adecuados para la eliminación del carácter local de las medidas y se desarrolla cada una de las etapas del modelo. Y un segundo momento, en el que se aplica en su totalidad el modelo desarrollado y se contrasta su eficacia predictiva. El modelo se aplica para la estimación de los valores medios y máximos de NO2 del territorio de estudio. Con la implementación del modelo propuesto se acomete la territorialización de los datos de calidad del aire con la reducción de tres factores clave para su efectiva integración en la planificación territorial o en el proceso de toma de decisiones asociado: incertidumbre, tiempo empleado para generar la predicción y recursos (datos y costes) asociados. El modelo permite obtener una predicción de valores del contaminante objeto de análisis en unas horas, frente a los periodos de modelización o análisis requeridos por otras metodologías. Los recursos necesarios son mínimos, únicamente contar con los datos de las estaciones de monitorización del territorio que, normalmente, están disponibles en las páginas web viii institucionales de los organismos gestores de las redes de medida de la calidad del aire. Por lo que respecta a las incertidumbres de la predicción, puede decirse que los resultados del modelo propuesto en esta tesis son estadísticamente muy correctos y que los errores medios son, en general, similares o menores que los encontrados con la aplicación de las metodologías existentes. ABSTRACT This thesis presents a new approach for mapping air quality, so that this variable of physical environment can be taken into account in physical or territorial planning. Ambient air quality is not normally considered in territorial planning mainly due to the complexity of its composition and behavior and the difficulty of counting with reliable and contrasted information. In addition, the wide spatial and temporal variability of the measurements of air quality makes his territorial consideration difficult and requires georeferenced information. This involves predicting measurements in the places of the territory where there are no data. This thesis develops a geostatistical model for predicting air quality values in a territory. The proposed model is based on the interpolation of measurements of pollutants from the monitoring stations, using ordinary kriging, after a detrending or removal of the local character of sampling values process. With the detrending process, the local character of the time series of sampling data, due to temporal and spatial variations of air quality, is removed. The transformation of the air quality values into site-independent quantities is performed using land use parameters and other characteristic parameters of local scale. This detrending of the monitoring data process results in a spatial homogeneous input set which is a prerequisite for a correct use of any interpolation algorithm, particularly, ordinary kriging. After the interpolation step, a retrending or retransformation is applied in order to incorporate the local character in the final map at places where no monitoring data is available. For the development of this model, the Community of Madrid is chosen as study area, because of the availability of actual data. These data, air quality values and local parameters, are used in two moments. A starting point, to optimize the selection of the most suitable indicators for the detrending process and to develop each one of the model stages. And a second moment, to fully implement the developed model and to evaluate its predictive power. The model is applied to estimate the average and maximum values of NO2 in the study territory. With the implementation of the proposed model, the territorialization of air quality data is undertaken with the reduction in three key factors for the effective integration of this parameter in territorial planning or in the associated decision making process: uncertainty, time taken to generate the prediction and associated resources (data and costs). This model allows the prediction of pollutant values in hours, compared to the implementation time periods required for other modeling or analysis methodologies. The required resources are also minimal, only having data from monitoring stations in the territory, that are normally available on institutional websites of the authorities responsible for air quality networks control and management. With regard to the prediction uncertainties, it can be concluded that the results of the proposed model are statistically very accurate and the mean errors are generally similar to or lower than those found with the application of existing methodologies.

Estudio sobre métodos de evaluación del paisaje y su potencial en la integración de las autopistas en el paisaje, nueva propuesta metodológica basada en sistemas de información geográfica y aplicación a autopistas en operación

La inclusión de las variables ambientales en el proceso de toma de decisiones relacionado con las grandes infraestructuras de transporte debe estar basada en los resultados obtenidos después de evaluarlas científicamente. El paisaje visual, entendido como el resultado de la interacción entre el observador y su entorno, toma cada vez más importancia como aspecto ambiental a tener en cuenta, tanto para las autoridades como para la sociedad. La evaluación del paisaje permite integrar las variables territoriales y su relación con el observador. Es necesario profundizar en el conocimiento de la relación del paisaje con las infraestructuras de transporte, en concreto con las autopistas, para desarrollar metodologías y herramientas científicas necesarias para su correcta evaluación. El objetivo de esta tesis es aportar una metodología que permita que el paisaje se integre como elemento estructural y funcional en el diseño de las autopistas. La investigación realizada ha permitido analizar en profundidad las variables que influyen en la percepción del paisaje propio de las autopistas, cuantificar en qué grado las intervenciones de integración paisajística mejoran dicha percepción y aportar una metodología que permite evaluar el carácter y la calidad visual del paisaje empleando fotografías e indicadores que se calculan con la ayuda de un sistema de información geográfica.ABSTRACT The inclusion of environmental variables in the decision making process related to major transport infrastructures should be based on the results obtained after scientific evaluation. The visual landscape, understood as the result of the interaction between the observer and the environment, is becoming more important as an environmental aspect to consider, both for the authorities and society. Landscape evaluation integrates territorial variables and their relationship to the viewer. This thesis deepens the knowledge of the relationship between landscape and transport infrastructures, in particular the highways. The objective of this thesis is to provide a methodology that allows the landscape to be integrated as a structural and functional element in the design of highways. This research has allowed to analyze in depth the variables that influence the perception of the highways’ landscape, to quantify the extent to which integration measures improve landscape perception and to provide a methodology to assess the character and visual quality of the landscape using photographs and indicators calculated by geographic information systems.

Strategic rigidity and foresight for technology adoption among electric utilities

The variation in the adoption of a technology as a major source of competitive advantage has been attributed to the wide-ranging strategic foresight and the integrative capability of a firm. These possible areas of competitive advantage can exist in the periphery of the firm's strategic vision and can get easily blurred as a result of rigidness and can permeate in the decision-making process of the firm. This article explores how electric utility firms with a renewable energy portfolio can become strategically rigid in terms of adoption of newer technologies. The reluctance or delay in the adoption of new technology can be characterized as strategic rigidness, brought upon as a result of a firm's core competence or core capability in the other, more conventional technology arrangement. This paper explores the implications of such rigidness on the performance of a firm and consequently on the energy eco-system. The paper substantiates the results by emphasizing the case of Iberdrola S.A., an incumbent firm as a wind energy developer and its adoption decision behavior. We illustrate that the very routines that create competitive advantage for firms in the electric utility industry are vulnerable as they might also develop as sources of competitive disadvantage, when firms confront environmental change and uncertainty.

Change-Impact driven Agile Architecting.

Software architecture is a key factor to scale up Agile Software Development ASD in large softwareintensive systems. Currently, software architectures are more often approached through mechanisms that enable to incrementally design and evolve software architectures aka. agile architecting. Agile architecting should be a light-weight decision-making process, which could be achieved by providing knowledge to assist agile architects in reasoning about changes. This paper presents the novel solution of using change-impact knowledge as the main driver for agile architecting. The solution consists of a Change Impact Analysis technique and a set of models to assist agile architects in the change -decision-making- process by retrieving the change-impact architectural knowledge resulting from adding or changing features iteration after iteration. To validate our approach, we have put our solution into practice by running a project of a metering management system in electric power networks in an i-smart software factory.

Construction cost and energy consumption resulting from energy retrofitting in an apartment building in Madrid (Spain).

This theoretical study analyzes the relation between the measures necessesary for the energy retrofitting of a residential building constructed in Madrid, their cost and the improvement of the energy rating of the dwellings. The aim of this work is to establish an evaluation methodology that allows developers and architects to obtain conclusions and orientates therm in the decisioin-making process. It will allow finding the most suitable cost-effective solutions in each case. This paper describes the methodology and the findings obtained. Energy retrofitting and the improvement of the energy behaviour of the building depend on the selection of the retrofitting solutions and also on the investment. In this case study to achieve the best energy rates it is necessary to improve the thermal performance of the envelope as well as the energy systems. Energy retrofitting means an increase in property value but it can't only be considered in economic terms. It is necessary to take into account unquantifiable aspects as increased comfort, improved sound insulation, livability, health, or the elimination of energy poverty situations.

A user-focused integrated system for sustainable refurbishment.

Nowadays, it is urgent to renovate a great number of residential buildings. The necessity of improving energy efficiency must also be considered as an opportunity to improve indoor comfort. To achieve this goal, it is essential to develop tools to be used in the decision-making process, aiming to refurbish buildings in an integrated, efficient and sustainable way. The integrated system developed is based on a set of indicators. Sustainability indicators are useful to synthesize and organize complex information. They can provide data to evaluate a process in different stages: evaluation, diagnosis, comparison and tracing. The set of proposed indicators aims to accomplish the holistic approach pursued by sustainable development. So, these indicators are divided into three groups: environmental, social and economic. However, the main innovation of the system of indicators is the social ones. The sustainable refurbishment system aims to be a user-focused one. Therefore, the starting point is the needs of the user and social indicators are developed around this. The system tackles the sustainable refurbishment of buildings beyond energy problems. It proposes incorporating users in the decision-making process involving them in the refurbishment and so, contributing to the success of the renovation. In order to achieve this target, three social indicators are used, divided into 10 sub-indicators, and a ?Questionnaire about Sustainable Refurbishment? is drawn up. This research has been carried out in the framework of ?Sustainable Refurbishment? Research and Development Project, an integrated project under the supervision of the Centro para el Desarrollo Tecnológico e Industrial (CDTI) from the Spanish Government, in which University and the Construction Industry collaborate. This research project aims to develop an integrated system for the retrofitting of existing buildings to improve their energy efficiency. Accordingly, an additional objective of the project is to improve quality of life of residents.

Método de análisis diacrónico para la intervención en el alojamiento con criterios ecológicos. El caso de Madrid 1940–2100

Las evidencias del impacto sobre el medio ambiente asociado al funcionamiento de las ciudades hacen que sea urgente proponer medidas que reduzcan este consumo y mejoren la eficiencia del metabolismo urbano. La existencia de límites en la disponibilidad de recursos materiales y energéticos, plantea actualmente un reto importante al ser humano: ¿son posibles otras formas de organización más adecuadas a esta condición de limitación? Para dar respuesta, resulta fundamental conocer cómo interactuarán nuestros sistemas urbanos en un modelo económico de continuo desarrollo, con la población que alojan, y si podrán adaptarse a la capacidad de carga limitada del Planeta, evitando futuras situaciones de colapso anunciadas desde distintos ámbitos científicos. En ese contexto, la tesis formula un método de análisis del alojamiento que, mediante la evaluación a largo plazo, permita proponer medidas de intervención para reducir el consumo de recursos asociado a su funcionamiento. Se parte de un enfoque ecológico para definir el alojamiento como una parte fundamental del sistema urbano, que está compuesto por tres elementos: habitantes, viviendas y recursos naturales; por tanto, para reducir los impactos asociados al alojamiento es necesario tener en cuenta la diferente naturaleza de estos elementos y el carácter dinámico de las relaciones que se producen entre ellos. La Ecología, a través del estudio de los ecosistemas, ha identificado estrategias de supervivencia y adaptación ante los cambios y perturbaciones. La similitud entre los elementos de un ecosistema (población y soporte) y los del alojamiento (habitantes, viviendas y recursos naturales) permite verificar que la aplicación de estas estrategias al alojamiento puede conducir a situaciones más deseables en la relación de los sistemas urbanos con su entorno A partir de esta hipótesis, se propone un método de análisis diacrónico1 o a largo plazo, para conocer la evolución en el tiempo del alojamiento a través de la cuantificación de una serie de indicadores descriptivos de los habitantes, las viviendas y los recursos naturales. La aplicación de este método a un sistema urbano permitiría conocer las características de los elementos del sistema y, para un ámbito temporal de futuro, prever su evolución, identificar escenarios no deseables y proponer medidas de intervención que corrijan anticipadamente estas situaciones y eviten impactos ambientales innecesarios. La validación del método de análisis se realiza mediante la aplicación al caso de Madrid en periodo retrospectivo (de 1940 a 2010) A partir del estudio de la evolución en Madrid de los indicadores seleccionados, se proponen medidas de intervención en el alojamiento basadas en estrategias ecológicas que habrían conducido a una evolución alternativa con un impacto menor sobre el medio ambiente que la situación actual. El método de análisis se aplica con carácter prospectivo definiendo tres escenarios de futuro para Madrid hasta 2100. Para cada uno de ellos se analiza la evolución previsible de los indicadores y se proponen diferentes medidas de intervención que, desde el punto de vista ecológico, conducirían a una situación más adecuada. La tesis concluye en el interés de este método de análisis diacrónico que permite estimar posibilidades en la evolución futura del alojamiento, identificar las necesidades de recursos para responder a las demandas de los habitantes y, desde un enfoque ecológico, definir, cuantificar y evaluar posibles medidas de intervención que reduzcan los impactos ambientales. El método, por tanto, es una herramienta de interés para la toma de decisiones en la intervención en el alojamiento y en la planificación urbana a largo plazo. ABSTRACT Evidence of the impact on the environment associated with the operation of cities make it urgent to propose measures to reduce energy consumption and improve the efficiency of urban metabolism. The limited availability of materials and energy resources currently poses a significant challenge to human beings: are more appropriate forms of organization for this limitation possible? In response, it is essential to know how our urban systems with the population they host will interact in an economic model of continuous development and whether they can adapt to the limited endurance capacity of the planet, thus avoiding future collapse situations which are being announced from different scientific fields. In this context, the thesis puts forward a method of housing analysis that by a long term assessment will enable to propose intervention measures to reduce resource consumption associated with its operation. The thesis is based on an ecological approach to identify housing as a fundamental part of the urban system, which is composed of three elements: inhabitants, homes and natural resources. Therefore, in order to reduce the impacts associated with housing it is necessary to consider the characteristics of these elements and the dynamic nature of the relationships among them. Ecology, through the analysis of ecosystems, has identified strategies for survival and adaptation to changes and disturbances. The similarity between the elements of an ecosystem (population and support) and housing (inhabitants, homes and natural resources) enables to verify that the implementation of these strategies to housing can lead to better situations in the relationship existing between urban systems with their environment. From this hypothesis, a diachronic or long term analysis method is proposed to know the evolution of housing over time through the quantification of a descriptive indicators series of inhabitants, homes and natural resources. The implementation of this method to a urban system would allow better knowledge of the characteristics of these elements and forecast their development, identify undesirable scenarios and propose early intervention measures to correct these situations and avoid unnecessary environmental impacts. The validation of the method of analysis has been proved in the city of Madrid for the years 1940-2010. From the analysis of the evolution of the indicators selected, accommodation intervention measures are proposed based on ecological strategies that would have led to an alternative development having less impact on the environment than that of the current situation. The analysis method is implemented prospectively defining three future scenarios for the city of Madrid until 2100. The likely evolution of the indicators are analyzed for each scenario and various intervention measures that would lead to a better situation from an ecological point of view are proposed. The thesis conclusion states the interest of this diachronic analysis method to estimate potential future developments in the housing field, identify resource requirements to meet the demands of the citizens and, from an ecological approach, define, quantify and assess possible intervention measures to reduce environmental impacts. The method, therefore, is an interesting tool for decision-making process as for the intervention in housing and urban planning in the long term.

Análisis de datos y modelado simbólico para aplicación de detección temprana de trastornos del lenguaje

Este Proyecto Fin de Grado trabaja en pos de la mejora y ampliación de los sistemas Pegaso y Gades, dos Sistemas Expertos enmarcados en el ámbito de la e-Salud. Estos sistemas, que ya estaban en funcionamiento antes del comienzo de este trabajo, apoyan la toma de decisiones en Atención Primaria. Esto es, permiten evaluar el nivel de adquisición del lenguaje en niños de 0 a 6 años a través de sus respectivas aplicaciones web. Además, permiten almacenar dichas evaluaciones y consultarlas posteriormente, junto con las decisiones del sistema asociadas a las mismas. Pegaso y Gades siguen una arquitectura de tres capas y están desarrollados usando fundamentalmente componentes Java y siguiendo. Como parte de este trabajo, en primer lugar se solucionan algunos problemas en el comportamiento de ambos sistemas, como su incompatibilidad con Java SE 7. A continuación, se desarrolla una aplicación que permite generar una ontología en lenguaje OWL desde código Java. Para ello, se estudia primero el concepto de ontología, el lenguaje OWL y las diferentes librerías Java existentes para generar ontologías OWL. Por otra parte, se mejoran algunas de las funcionalidades de los sistemas de partida y se desarrolla una nueva funcionalidad para la explotación de los datos almacenados en las bases de datos de ambos sistemas Esta nueva funcionalidad consiste en un módulo responsable de la generación de estadísticas a partir de los datos de las evaluaciones del lenguaje que hayan sido realizadas y, por tanto, almacenadas en las bases de datos. Estas estadísticas, que pueden ser consultadas por todos los usuarios de Pegaso y Gades, permiten establecer correlaciones entre los diversos conjuntos de datos de las evaluaciones del lenguaje. Por último, las estadísticas son mostradas por pantalla en forma de varios tipos de gráficas y tablas, de modo que los usuarios expertos puedan analizar la información contenida en ellas. ABSTRACT. This Bachelor's Thesis works towards improving and expanding the systems Pegaso and Gades, which are two Expert Systems that belong to the e-Health field. These systems, which were already operational before starting this work, support the decision-making process in Primary Care. That is, they allow to evaluate the language acquisition level in children from 0 to 6 years old. They also allow to store these evaluations and consult them afterwards, together with the decisions associated to each of them. Pegaso and Gades follow a three-tier architecture and are developed using mainly Java components. As part of this work, some of the behavioural problems of both systems are fixed, such as their incompatibility with Java SE 7. Next, an application that allows to generate an OWL ontology from Java code is developed. In order to do that, the concept of ontology, the OWL language and the different existing Java libraries to generate OWL ontologies are studied. On the other hand, some of the functionalities of the initial systems are improved and a new functionality to utilise the data stored in the databases of both systems is developed. This new functionality consists of a module responsible for the generation of statistics from the data of the language evaluations that have been performed and, thus, stored in the databases. These statistics, which can be consulted by all users of Pegaso and Gades, allow to establish correlations between the diverse set of data from the language evaluations. Finally, the statistics are presented to the user on the screen in the shape of various types of charts and tables, so that the expert users can analyse the information contained in them.

Aplicación de técnicas de inteligencia artificial para contribuir en la detección de microcalcificaciones en mamografía digitalizada

A nivel mundial, el cáncer de mama es el tipo de cáncer más frecuente además de una de las principales causas de muerte entre la población femenina. Actualmente, el método más eficaz para detectar lesiones mamarias en una etapa temprana es la mamografía. Ésta contribuye decisivamente al diagnóstico precoz de esta enfermedad que, si se detecta a tiempo, tiene una probabilidad de curación muy alta. Uno de los principales y más frecuentes hallazgos en una mamografía, son las microcalcificaciones, las cuales son consideradas como un indicador importante de cáncer de mama. En el momento de analizar las mamografías, factores como la capacidad de visualización, la fatiga o la experiencia profesional del especialista radiólogo hacen que el riesgo de omitir ciertas lesiones presentes se vea incrementado. Para disminuir dicho riesgo es importante contar con diferentes alternativas como por ejemplo, una segunda opinión por otro especialista o un doble análisis por el mismo. En la primera opción se eleva el coste y en ambas se prolonga el tiempo del diagnóstico. Esto supone una gran motivación para el desarrollo de sistemas de apoyo o asistencia en la toma de decisiones. En este trabajo de tesis se propone, se desarrolla y se justifica un sistema capaz de detectar microcalcificaciones en regiones de interés extraídas de mamografías digitalizadas, para contribuir a la detección temprana del cáncer demama. Dicho sistema estará basado en técnicas de procesamiento de imagen digital, de reconocimiento de patrones y de inteligencia artificial. Para su desarrollo, se tienen en cuenta las siguientes consideraciones: 1. Con el objetivo de entrenar y probar el sistema propuesto, se creará una base de datos de imágenes, las cuales pertenecen a regiones de interés extraídas de mamografías digitalizadas. 2. Se propone la aplicación de la transformada Top-Hat, una técnica de procesamiento digital de imagen basada en operaciones de morfología matemática. La finalidad de aplicar esta técnica es la de mejorar el contraste entre las microcalcificaciones y el tejido presente en la imagen. 3. Se propone un algoritmo novel llamado sub-segmentación, el cual está basado en técnicas de reconocimiento de patrones aplicando un algoritmo de agrupamiento no supervisado, el PFCM (Possibilistic Fuzzy c-Means). El objetivo es encontrar las regiones correspondientes a las microcalcificaciones y diferenciarlas del tejido sano. Además, con la finalidad de mostrar las ventajas y desventajas del algoritmo propuesto, éste es comparado con dos algoritmos del mismo tipo: el k-means y el FCM (Fuzzy c-Means). Por otro lado, es importante destacar que en este trabajo por primera vez la sub-segmentación es utilizada para detectar regiones pertenecientes a microcalcificaciones en imágenes de mamografía. 4. Finalmente, se propone el uso de un clasificador basado en una red neuronal artificial, específicamente un MLP (Multi-layer Perceptron). El propósito del clasificador es discriminar de manera binaria los patrones creados a partir de la intensidad de niveles de gris de la imagen original. Dicha clasificación distingue entre microcalcificación y tejido sano. ABSTRACT Breast cancer is one of the leading causes of women mortality in the world and its early detection continues being a key piece to improve the prognosis and survival. Currently, the most reliable and practical method for early detection of breast cancer is mammography.The presence of microcalcifications has been considered as a very important indicator ofmalignant types of breast cancer and its detection and classification are important to prevent and treat the disease. However, the detection and classification of microcalcifications continue being a hard work due to that, in mammograms there is a poor contrast between microcalcifications and the tissue around them. Factors such as visualization, tiredness or insufficient experience of the specialist increase the risk of omit some present lesions. To reduce this risk, is important to have alternatives such as a second opinion or a double analysis for the same specialist. In the first option, the cost increases and diagnosis time also increases for both of them. This is the reason why there is a great motivation for development of help systems or assistance in the decision making process. This work presents, develops and justifies a system for the detection of microcalcifications in regions of interest extracted fromdigitizedmammographies to contribute to the early detection of breast cancer. This systemis based on image processing techniques, pattern recognition and artificial intelligence. For system development the following features are considered: With the aim of training and testing the system, an images database is created, belonging to a region of interest extracted from digitized mammograms. The application of the top-hat transformis proposed. This image processing technique is based on mathematical morphology operations. The aim of this technique is to improve the contrast betweenmicrocalcifications and tissue present in the image. A novel algorithm called sub-segmentation is proposed. The sub-segmentation is based on pattern recognition techniques applying a non-supervised clustering algorithm known as Possibilistic Fuzzy c-Means (PFCM). The aim is to find regions corresponding to the microcalcifications and distinguish them from the healthy tissue. Furthermore,with the aim of showing themain advantages and disadvantages this is compared with two algorithms of same type: the k-means and the fuzzy c-means (FCM). On the other hand, it is important to highlight in this work for the first time the sub-segmentation is used for microcalcifications detection. Finally, a classifier based on an artificial neural network such as Multi-layer Perceptron is used. The purpose of this classifier is to discriminate froma binary perspective the patterns built from gray level intensity of the original image. This classification distinguishes between microcalcifications and healthy tissue.

TITIM GIS-tool: A GIS-based decision support system for measuring the territorial impact of transport infrastructures

To achieve sustainability in the area of transport we need to view the decision-making process as a whole and consider all the most important socio-economic and environmental aspects involved. Improvements in transport infrastructures have a positive impact on regional development and significant repercussions on the economy, as well as affecting a large number of ecological processes. This article presents a DSS to assess the territorial effects of new linear transport infrastructures based on the use of GIS. The TITIM ? Transport Infrastructure Territorial Impact Measurement ? GIS tool allows these effects to be calculated by evaluating the improvement in accessibility, loss of landscape connectivity, and the impact on other local territorial variables such as landscape quality, biodiversity and land-use quality. The TITIM GIS tool assesses these variables automatically, simply by entering the required inputs, and thus avoiding the manual reiteration and execution of these multiple processes. TITIM allows researchers to use their own GIS databases as inputs, in contrast with other tools that use official or predefined maps. The TITIM GIS-tool is tested by application to six HSR projects in the Spanish Strategic Transport and Infrastructure Plan 2005?2020 (PEIT). The tool creates all 65 possible combinations of these projects, which will be the real test scenarios. For each one, the tool calculates the accessibility improvement, the landscape connectivity loss, and the impact on the landscape, biodiversity and land-use quality. The results reveal which of the HSR projects causes the greatest benefit to the transport system, any potential synergies that exist, and help define a priority for implementing the infrastructures in the plan

Corporate social responsibility in portfolio selection: A "goal games" against nature approach

Nowadays, there is an uprising social pressure on big companies to incorporate into their decision-making process elements of the so-called social responsibility. Among the many implications of this fact, one relevant one is the need to include this new element in classic portfolio selection models. This paper meets this challenge by formulating a model that combines goal programming with "goal games" against nature in a scenario where the social responsibility is defined through the introduction of a battery of sustainability indicators amalgamated into a synthetic index. In this way, we have obtained an efficient model that only implies solving a small number of linear programming problems. The proposed approach has been tested and illustrated by using a case study related to the selection of securities in international markets.

A model of air transport passenger incidents and rights

This paper describes a representation of the legal framework in the air transport passenger's rights domain and the foremost incidents that trigger the top of consumer complaints ranking in the EU. It comprises the development of a small network of three ontologies, formalisation of scenarios, specification of properties and identification of relations. The approach is illustrated by means of a case study based in the context of a real life cancelled flight incident. This is part of an intended support-system that aims to provide both consumers and companies with relevant legal information to enhance the decision-making process.

Ontology-driven legal support-system in air transport passenger domain

This paper aims to present a preliminary version of asupport-system in the air transport passenger domain. This system relies upon an underlying on-tological structure representing a normative framework to facilitatethe provision of contextualized relevant legal information.This information includes the pas-senger's rights and itenhances self-litigation and the decision-making process of passengers.Our contribution is based in the attempt of rendering a user-centric-legal informationgroundedon case-scenarios of the most pronounced incidents related to the consumer complaints in the EU.A number ofadvantages with re-spect to the current state-of-the-art services are discussed and a case study illu-strates a possible technological application.