Estudio Energético y de Explotación de diferentes conjuntos de Labranza para el Cultivo de la Yuca (Manihot esculenta, Crantz) en un Fluvisol

El trabajo se desarrolló en tres etapas de investigación, las dos primeras fueron realizadas en la Unidad Básica de Producción Cooperativa “El Palmar” perteneciente a la Empresa de Cultivos Varios "Paquito Rosales Benítez" del municipio de Yara, provincia de Granma, Cuba, el cual se llevó a cabo en el período de abril de 2005 a enero de 2008; y de noviembre de 2012 a febrero de 2013 respectivamente; la tercera se ejecutó de mayo a junio de 2013 en un canal de suelo ubicado en la nave de maquinaria del Departamento de Ingeniería Rural de la Universidad Politécnica de Madrid. En la primera etapa se evaluaron los conjuntos tractor-apero que intervienen en la realización de cuatro sistemas de labranza para el cultivo de la yuca, variedad Enana Rosada. Los sistemas de laboreo fueron: T1, labor de aradura (alzado) con un arado de discos seguidas de un pase de grada de discos un pase cruzado de un escarificador y un pase con una grada de discos (5 labores); T2, laboreo mínimo que comprende una labor profunda con un escarificador con saetas seguido por una labor de grada de discos (2 labores); T3, laboreo mínimo en el que se realizaron dos pases cruzados con escarificador y una labor de fresado con una fresadora de eje horizontal (3 labores) y; T4, dos labores cruzadas con la grada de discos seguidas por otras dos pases cruzados con el escarificador y una última labor con la grada de discos (5 labores). Se realizaron cinco observaciones de la jornada laboral para cada uno de los conjuntos tractorapero de cada sistema de laboreo en tres campañas, evaluando el consumo de combustible, las diferentes productividades, los índices y coeficientes tecnológicos y de explotación, el rendimiento del cultivo el balance energético del mismo, y la emisión de CO2 equivalente. En la segunda etapa se determinó la fuerza de tiro requerida por un órgano de trabajo de un escarificador con saetas en condiciones de campo, en tres profundidades (15, 25 y 35 cm) y a cuatro velocidades de trabajo (1,30; 1,49; 1,65 y 2,32 m s-1). En la tercera etapa se determinaron las fuerzas horizontales y verticales en una maqueta experimental de un órgano de trabajo de un escarificador con saetas (1:5 del tamaño real del apero) en cuatro contenidos de humedad (60, 90, 120 y 150 g kg-1), tres densidades del suelo (1,1; 1,2 y 1,3 Mg m-3) y una velocidad de 40 mm s-1. Se comparan los resultados del apero a tamaño real y la maqueta experimental. Los mejores resultados relacionados con los indicadores evaluados a la maquinaria correspondieron al sistema de laboreo mínimo T2, el cual presenta la mejor productividad por hora de tiempo limpio (1,34 ha h-1) y de tiempo operativo (1,27 ha h-1), con diferencias significativas respecto al resto de los sistemas de labranza evaluados; así como el menor consumo de combustible (32,4 L ha-1) y el mejor comportamiento energético, con diferencias significativas respecto a las demás, resultando inferior en un 63, 30 y 58 % con relación a T1, T3 y T4. La fuerza de tiro del órgano de trabajo del escarificador con saetas se incrementa con la densidad del suelo y con la profundidad, y velocidad de trabajo. Las fuerzas horizontales y verticales de la maqueta se incrementan linealmente con la densidad y humedad del suelo. Existe una relación lineal entre las fuerzas de tiro y horizontales medidas en el apero real y en el apero a escala con el contenido de humedad del suelo. ABSTRACT The work was developed in three stages of research, the first two were conducted in the Basic Unit of Cooperative Production "El Palmar" belonging to the agricultural farm "Paquito Rosales Benitez" in the municipality of Yara, Granma Province, Cuba, the which was conducted in the period from April 2005 to January 2008 and November 2012 and February 2013 respectively, the third from May to June 2013 on a soilbin located in the ship's machinery of Rural Engineering Department of the Technical University of Madrid. In the first stage were evaluated tractor-implement sets involved in the completion of four tillage systems for cassava, Pink Dwarf variety. Tillage systems were: T1, plowing (elevation) with a disk plow followed by a pass of disc harrow, a cross of scarifier and a pass with a disc harrow (5 labours), T2, minimum tillage comprising a deep work with a scarifier with a bolt followed by a disc harrow work (two labours); T3, minimum tillage which two crossed passes performed with scarifier and milling labour with a horizontal axis milling machine (three labours) and, T4, two crossed labours with disc harrow followed by two crossed passes with the scarifier and a final labour with disc harrow (5 labours). Five observations of the working day for each tractor-implement sets of each tillage system in three seasons were performed, evaluating fuel consumption, different productivities, indexes and technological and operational factors, the crop yield energy balance and the emission of CO2 equivalent. In the second stage we determined the draft force required by a working body of a scarifier with bolt under field conditions at three depths (15, 25 and 35 cm) and four operating speeds (1.30, 1.49 , 1.65 and 2.32 m s-1). In the third stage were determined horizontal and vertical forces on an experimental model of a working body of a scarifier with bolt (1:5 real scale of the implement) in four moisture contents (60, 90, 120 and 150 g kg -1), three soil densities (1.1, 1.2, and 1.3 Mg m-3) and a speed of 40 mm s-1.The results of real scale implement the experimental model were compared. The best results related to evaluated machinery indicators corresponded to T2 minimum tillage system, which presents the best productivity per hour clean time (1.34 ha h-1) and operating time (1.27 ha h-1), with significant differences compared to other tillage systems evaluated; as well as lower fuel consumption (32.4 L ha-1) and the best energy performance, with significant differences from the other, resulting lower by 63, 30 and 58% compared to T1, T3 and T4. The draft force of the working body of the scarifier with bolt increases with soil density and depth, and speed of work. The horizontal and vertical forces of the model increase linearly with density and soil moisture. A linear relationship exists between the shot and horizontal forces measured at the real implement and scale implement with the soil moisture content.

Remote sensing of LAI, chlorophyll and leaf nitrogen pools of crop- and grasslands in five European landscapes.

Leaf nitrogen and leaf surface area influence the exchange of gases between terrestrial ecosystems and the atmosphere, and play a significant role in the global cycles of carbon, nitrogen and water. The purpose of this study is to use field-based and satellite remote-sensing-based methods to assess leaf nitrogen pools in five diverse European agricultural landscapes located in Denmark, Scotland (United Kingdom), Poland, the Netherlands and Italy. REGFLEC (REGularized canopy reFLECtance) is an advanced image-based inverse canopy radiative transfer modelling system which has shown proficiency for regional mapping of leaf area index (LAI) and leaf chlorophyll (CHLl) using remote sensing data. In this study, high spatial resolution (10–20 m) remote sensing images acquired from the multispectral sensors aboard the SPOT (Satellite For Observation of Earth) satellites were used to assess the capability of REGFLEC for mapping spatial variations in LAI, CHLland the relation to leaf nitrogen (Nl) data in five diverse European agricultural landscapes. REGFLEC is based on physical laws and includes an automatic model parameterization scheme which makes the tool independent of field data for model calibration. In this study, REGFLEC performance was evaluated using LAI measurements and non-destructive measurements (using a SPAD meter) of leaf-scale CHLl and Nl concentrations in 93 fields representing crop- and grasslands of the five landscapes. Furthermore, empirical relationships between field measurements (LAI, CHLl and Nl and five spectral vegetation indices (the Normalized Difference Vegetation Index, the Simple Ratio, the Enhanced Vegetation Index-2, the Green Normalized Difference Vegetation Index, and the green chlorophyll index) were used to assess field data coherence and to serve as a comparison basis for assessing REGFLEC model performance. The field measurements showed strong vertical CHLl gradient profiles in 26% of fields which affected REGFLEC performance as well as the relationships between spectral vegetation indices (SVIs) and field measurements. When the range of surface types increased, the REGFLEC results were in better agreement with field data than the empirical SVI regression models. Selecting only homogeneous canopies with uniform CHLl distributions as reference data for evaluation, REGFLEC was able to explain 69% of LAI observations (rmse = 0.76), 46% of measured canopy chlorophyll contents (rmse = 719 mg m−2) and 51% of measured canopy nitrogen contents (rmse = 2.7 g m−2). Better results were obtained for individual landscapes, except for Italy, where REGFLEC performed poorly due to a lack of dense vegetation canopies at the time of satellite recording. Presence of vegetation is needed to parameterize the REGFLEC model. Combining REGFLEC- and SVI-based model results to minimize errors for a "snap-shot" assessment of total leaf nitrogen pools in the five landscapes, results varied from 0.6 to 4.0 t km−2. Differences in leaf nitrogen pools between landscapes are attributed to seasonal variations, extents of agricultural area, species variations, and spatial variations in nutrient availability. In order to facilitate a substantial assessment of variations in Nl pools and their relation to landscape based nitrogen and carbon cycling processes, time series of satellite data are needed. The upcoming Sentinel-2 satellite mission will provide new multiple narrowband data opportunities at high spatio-temporal resolution which are expected to further improve remote sensing capabilities for mapping LAI, CHLl and Nl.

Analysis of safety-based incentives in public private partnerships. The case of Spain

OUTLINE: • Introduction • Experimental Setup • Experimental Procedure • Experimental Results - Surface Roughness - Residual Stresses - Friction - Wear - EDX • Conclusions

Ball possession effectiveness in men's and women's elite basketball according to situational variables in different game periods

The aim of the present study was to identify the importance of floorball tactical variables to predict ball possession effectiveness, when controlling quality of opposition and game periods. The sample was composed by 1500 ball possessions, corresponding to 14 games randomly selected from the International Championships played during 2008 and 2010 (World Championship, Four nations tournament and classificatory phases for World Championship) by teams from different competition levels (HIGH, INTERMEDIATE and LOW). The effects of the predictor variables on successful ball possessions according to the three game contexts (HIGH vs. HIGH; HIGH vs. LOW; LOW vs. LOW games) were analyzed using Binomial Logistic Regressions. The results showed no interaction with the game period. In HIGH vs. HIGH games, quality of opposition showed an association with ball possession effectiveness with ending zone, offensive system, possession duration, height of shooting and defensive pressures previous to the shot. In HIGH vs. LOW games the important factors were the starting zone, possession duration, defensive pressure previous to the last pass and to the shot, technique of shooting and the number players involved in each ball possession. Finally, in LOW vs. LOW games, the results emphasized the importance of starting and ending zones, the number of passes used and the technique of shooting. In conclusion, elite floorball performance is mainly affected by quality of opposition showing different game patterns in each context that should be considered by coaches when preparing practices and competitions.

Effect of LSP treatment on the surface topography, friction and wear of Al2024 alloy

OUTLINE: •Introduction •Experimental Setup • Experimental Procedure • Experimental Results - Surface Roughness - Residual Stresses - Friction - Wear - EDX •Conclusions

Laser Shock Microforming of Thin Metal Sheets with Q-Switched ns Lasers

The increasing demands in MEMS fabrication are leading to new requirements in production technology. Especially the packaging and assembly require high accuracy in positioning and high reproducibility in combination with low production costs. Conventional assembly technology and mechanical adjustment methods are time consuming and expensive. Each component of the system has to be positioned and fixed. Also adjustment of the parts after joining requires additional mechanical devices that need to be accessible after joining.

LSP Influence on Mechanical Properties of Thin Dissimilar Laser Welded Joints

Assessment of laser shock processing effects on mechanical resistance of thin dissimilar laser welded joints

Effect of Thermal Relaxation on LSP Induced Residual Stresses and Fatigue Life Enhancement of AISI 316L stainless steel

Effect of Thermal Relaxation on LSP Induced Residual Stresses and Fatigue Life Enhancement of AISI 316L stainless steel

Numerical prediction of residual stresses fields induced in thin Al2024-T351 sheets by laser shock processing

Outline: • Introduction • Numerical model SHOCKLAS© • Single LSP pulses • Overlapped LSP pulses • Discussion and Outlook

NAMA3DS1-COSPAD1: Subjective video quality assessment database on coding conditions introducing freely available high quality 3D stereoscopic sequences

Research in stereoscopic 3D coding, transmission and subjective assessment methodology depends largely on the availability of source content that can be used in cross-lab evaluations. While several studies have already been presented using proprietary content, comparisons between the studies are difficult since discrepant contents are used. Therefore in this paper, a freely available dataset of high quality Full-HD stereoscopic sequences shot with a semiprofessional 3D camera is introduced in detail. The content was designed to be suited for usage in a wide variety of applications, including high quality studies. A set of depth maps was calculated from the stereoscopic pair. As an application example, a subjective assessment has been performed using coding and spatial degradations. The Absolute Category Rating with Hidden Reference method was used. The observers were instructed to vote on video quality only. Results of this experiment are also freely available and will be presented in this paper as a first step towards objective video quality measurement for 3DTV.

Temporal segmentation tool for high-quality real time video editing software

The increasing use of video editing software requires faster and more efficient editing tools. As a first step, these tools perform a temporal segmentation in shots that allows a later building of indexes describing the video content. Here, we propose a novel real-time high-quality shot detection strategy, suitable for the last generation of video editing software requiring both low computational cost and high quality results. While abrupt transitions are detected through a very fast pixel-based analysis, gradual transitions are obtained from an efficient edge-based analysis. Both analyses are reinforced with a motion analysis that helps to detect and discard false detections. This motion analysis is carried out exclusively over a reduced set of candidate transitions, thus maintaining the computational requirements demanded by new applications to fulfill user needs.

On the Absence of Carrier Drift in Two-Terminal Devices and the Origin of Their Lowest Resistance per Carrier RK= h/q^2

After a criticism on today’s model for electrical noise in resistors, we pass to use a Quantum-compliant model based on the discreteness of electrical charge in a complex Admittance. From this new model we show that carrier drift viewed as charged particle motion in response to an electric field is unlike to occur in bulk regions of Solid-State devices where carriers react as dipoles against this field. The absence of the shot noise that charges drifting in resistors should produce and the evolution of the Phase Noise with the active power existing in the resonators of L-C oscillators, are two effects added in proof for this conduction model without carrier drift where the resistance of any two-terminal device becomes discrete and has a minimum value per carrier that is the Quantum resistance RK/(2pi)

Evaluación de un forward modelling de ondas sísmicas : aplicación práctica del efecto source ghost

Se ha utilizado un programa de modelización de ondas sísmicas por métodos finitos en dos dimensiones para analizar el efecto Source Ghost en profundidades de 4, 14, 24 y 34 metros. Este efecto se produce cuando se dispara una fuente enterrada y, debido al contacto suelo-aire, se genera una onda reflejada que, en cierto momento, se superpone con la onda principal, produciéndose una disminución de la amplitud de la onda (Source Ghost). Los resultados teóricos del efecto se han comparado con los resultados prácticos del programa de modelización concluyéndose que es posible determinar el rango de frecuencias afectado por el efecto. Sin embargo, la distancia entre receptor y fuente es una nueva variable que desplaza el efecto hacia frecuencias más altas impidiendo su predicción. La utilización de una técnica de procesamiento básica como la corrección del Normal Move-Out (NMO) en el apilado de las trazas, contrarresta la variable distancia receptor-fuente, y por tanto es posible calcular el rango de frecuencias del efecto Source Ghost. Abstract A seismic wave forward modeling in two dimensions using finite-difference method has been used for analyzing the Source Ghost effect at depths between 4-34 meters. A shot from a buried source generates a down going reflection due to the free surface boundary and, at some point, it interferes with the main wave propagation causing a reduction of wave amplitude at some frequency range (Source Ghost). Theoretical results and experimental results provided by the forward modeling are compared for concluding that the forward modeling is able to identify the frequency range affected by the source ghost. Nevertheless, it has been found that the receiver-source distance (offset) is a new variable that modifies the frequency range to make it unpredictable. A basic seismic processing technique, Normal Move-Out (NMO) correction, has been used for a single twenty fold CMP gather. The final stack shows that the processing technique neutralize the offset effect and therefore the forward modeling is still capable to determine the affected frequency range by the source ghost regardless the distance between receiver and source.

Evaluación del rendimiento de jugadores y equipos de fútbol de nivel de élite en diferentes contextos situacionales = Evaluation on Match Performances of Professional Football Players and Teams under Different Situational Conditions = 不同情境条件下高水平足球运动员和运动队的比赛表现分析

El análisis del rendimiento en deportes juega un papel esencial en el fútbol profesional. Aunque el estudio del análisis del juego en fútbol se ha utilizado desde diferentes ámbitos y situaciones, todavía existen diferentes aspectos y componentes del juego que siguen sin estar estudiados. En este sentido existen diferentes aspectos que deben de superar los estudios previos centrados en el componente descriptivo tales como el uso de variables/ indicadores de rendimiento que no se han definido ni estudiado, la validez de los métodos observaciones que no han sido testados con los softwares específicos en fútbol, la aplicación y utilidad de los resultados, así como las limitaciones del estudio de las variables situacionales/contextuales. Con el objetivo de cubrir las citadas limitaciones se han diseñado 6 estudios independientes e inter-relacionados que tratan de estudiar los aspectos anteriormente referidos. El primer estudio evalua la fiabilidad inter-observadores de las estadísticas de juego de la empresa privada OPTA Sportsdata, estos datos son la muestra de estudio de la presente tesis doctoral. Dos grupos de observadores experimentados se requieren para analizar un partido de la liga española de manera independiente. Los resultados muestran que los eventos de equipos y porteros codificados por los inter-operadores alcanzan un acuerdo muy bueno (valores kappa entre 0.86 y 0.94). La validez inter-observadores de las acciones de juego y los datos de jugadores individuales se evaluó con elevados niveles de acuerdo (valores del coeficiente de correlación intraclase entre 0.88 hasta 1.00, el error típico estandarizado variaba entre 0.00 hasta 0.37). Los resultados sugieren que las estadísticas de juego registradas por los operadores de la empresa OPTA Sportsdata están bien entrenados y son fiables. El segundo, tercer y cuarto estudio se centran en resaltar la aplicabilidad del análisis de rendimiento en el fútbol así como para explicar en profundidad las influencias de las variables situacionales. Utilizando la técnica de los perfiles de rendimiento de jugadores y equipos de fútbol se puede evaluar y comparar de manera gráfica, fácil y visual. Así mismo, mediante esta técnica se puede controlar el efecto de las variables situacionales (localización del partido, nivel del equipo y del oponente, y el resultado final del partido). Los perfiles de rendimiento de porteros (n = 46 porteros, 744 observaciones) y jugadores de campo (n = 409 jugadores, 5288 observaciones) de la primera division professional de fútbol Española (La Liga, temporada 2012-13), los equipos (n = 496 partidos, 992 observaciones) de la UEFA Champions League (temporadas 2009-10 a 2012-13) fueron analizados registrando la media, desviación típica, mediana, cuartiles superior e inferior y el recuento de valores de cada indicador de rendimiento y evento, los cuales se presentaron en su forma tipificada y normalizada. Los valores medios de los porteros de los equipos de diferentes niveles de La Liga y de los equipos de diferente nivel de la UEFA Champions League cuando jugaban en diferentes contextos de juego y situaciones (variables situacionales) fueron comparados utilizando el ANOVA de un factor y la prueba t para muestras independientes (localización del partido, diferencias entre casa y fuera), y fueron establecidos en los perfiles de red después de unificar todos los registros en la misma escala derivada con valores estandarizados. Mientras que las diferencias de rendimiento entre los jugadores de los mejores equipos (Top3) y los peores (Bottom3) fueron comparados mediante el uso de diferencias en la magnitud del tamaño del efecto. El quinto y el sexto estudio analizaban el rendimiento del fútbol desde un punto de vista de predicción del rendimiento. El modelo linear general y el modelo lineal general mixto fue empleado para analizar la magnitud de las relaciones de los indicadores y estadísticas de juego con el resultado final del partido en función del tipo de partido (partidos ajustados o todos los partidos) en la fase de grupos de la Copa del Mundo 2014 de Brasil (n = 48 partidos, 38 partidos ajustados) y La Liga 2012-13 (n = 320 partidos ajustados). Las relaciones fueron evaluadas mediante las inferencias en la magnitud de las diferencias y se expresaron como partidos extra ganados o perdidos por cada 10 partidos mediante la variable calculada en 2 desviaciones típicas. Los resultados mostraron que, para los 48 partidos de la fase de grupos de la Copa del Mundo 2014, nueve variables tuvieron un efecto positive en la probabilidad de ganar (tiros, tiros a puerta, tiros de contraataque, tiros dentro del área, posesión de balón, pases en corto, media de secuencia de pases, duelos aéreos y entradas), cuatro tuvieron efectos negativos (tiros bloqueados, centros, regates y tarjetas amarillas), y otras 12 variables tenían efectos triviales o poco claros. Mientras que los 38 partidos ajustados, el efecto de duelos aéreos y tarjetas amarillas fueron triviales y claramente negativos respectivamente. En la La Liga, existió un efecto moderado positive para cada equipo para los tiros a puerta (3.4 victorias extras por cada 10 partidos; 99% IC ±1.0), y un efecto positivo reducido para tiros totales (1.7 victorias extrsa; ±1.0). Los efectos de la mayoría de los eventos se han relacionado con la posesión del balón, la cual obtuvo efectos negativos entre equipos (1.2 derrotas extras; ±1.0) pero un efecto positivo pequeño entra equipos (1.7 victorias extras; ±1.4). La localización del partido mostró un efecto positive reducido dentro de los equipos (1.9 victorias extras; ±0.9). Los resultados obtenidos en los perfiles y el modelado del rendimiento permiten ofrecer una información detallada y avanzada para el entrenamiento, la preparación previa a los partidos, el control de la competición y el análisis post-partido, así como la evaluación e identificación del talento de los jugadores. ABSTRACT Match performance analysis plays an important role in the modern professional football. Although the research in football match analysis is well-developed, there are still some issues and problems remaining in this field, which mainly include the lack of operational definitions of variables, reliability issues, applicability of the findings, the lack of contextual/situational variables, and focusing too much on descriptive and comparative analysis. In order to address these issues, six independent but related studies were conducted in the current thesis. The first study evaluated the inter-operator reliability of football match statistics from OPTA Sportsdata Company which is the data resourse of the thesis. Two groups of experienced operators were required to analyse a Spanish league match independently in the experiment. Results showed that team events and goalkeeper actions coded by independent operators reached a very good agreement (kappa values between 0.86 and 0.94). The inter-operator reliability of match actions and events of individual outfield players was also tested to be at a high level (intra-class correlation coefficients ranged from 0.88 to 1.00, standardised typical error varied from 0.00 to 0.37). These results suggest that the football match statistics collected by well-trained operators from OPTA Sportsdata Company are reliable. The second, third and fourth study aims to enhance the applicability of football match performance analysis and to explore deeply the influences of situational variables. By using a profiling technique, technical and tactical performances of football players and teams can be interpreted, evaluated and compared more easily and straightforwardly, meanwhile, influences and effects from situational variables (match location, strength of team and opposition, and match outcome) on the performances can be properly incorporated. Performance profiles of goalkeepers (n = 46 goalkeepers, 744 full match observations) and outfield players (n = 409 players, 5288 full match observations) from the Spanish First Division Professional Football League (La Liga, season 2012-13), teams (n = 496 matches, 992 observations) from UEFA Champions League (seasons 2009-10 to 2012-13) were set up by presenting the mean, standard deviation, median, lower and upper quartiles of the count values of each performance-related match action and event to represent their typical performances and spreads. Means of goalkeeper from different levels of team in La Liga and teams of different strength in UEFA Champions League when playing under different situational conditions were compared by using one-way ANOVA and independent sample t test (for match location, home and away differences), and were plotted into the same radar charts after unifying all the event counts by standardised score. While differences between the performances of outfield players from Top3 and from Bottom3 teams were compared by magnitude-based inferences. The fifth and sixth study aims to move from the descriptive and comparative football match analysis to a more predictive one. Generalised linear modelling and generalised mixed linear modelling were undertaken to quantify relationships of the performance-related match events, actions and variables with the match outcome in different types of games (close games and all games) in the group stage of 2014 Brazil FIFA World Cup (n = 48 games, 38 close games) and La Liga 2012-13 (n = 320 close games). Relationships were evaluated with magnitude-based inferences and were expressed as extra matches won or lost per 10 matches for an increase of two standard deviations of a variable. Results showed that, for all the 48 games in the group stage of 2014 FIFA World Cup, nine variables had clearly positive effects on the probability of winning (shot, shot on target, shot from counter attack, shot from inside area, ball possession, short pass, average pass streak, aerial advantage, and tackle), four had clearly negative effects (shot blocked, cross, dribble and red card), other 12 variabless had either trivial or unclear effects. While for the 38 close games, the effects of aerial advantage and yellow card turned to trivial and clearly negative, respectively. In the La Liga, there was a moderate positive within-team effect from shots on target (3.4 extra wins per 10 matches; 99% confidence limits ±1.0), and a small positive within-team effect from total shots (1.7 extra wins; ±1.0). Effects of most other match events were related to ball possession, which had a small negative within-team effect (1.2 extra losses; ±1.0) but a small positive between-team effect (1.7 extra wins; ±1.4). Game location showed a small positive within-team effect (1.9 extra wins; ±0.9). Results from the established performance profiles and modelling can provide detailed and straightforward information for training, pre-match preparations, in-match tactical approaches and post-match evaluations, as well as for player identification and development. 摘要 比赛表现分析在现代足球中起着举足轻重的作用。尽管如今对足球比赛表现分析的研究已经相对完善，但仍有很多不足之处。这些不足主要体现在：研究中缺乏对研究变量的清晰定义、数据信效度缺失、研究结果的实用性受限、比赛情境因素缺失以及过于集中在描述性和对比性分析等。针对这些问题，本论文通过六个独立而又相互联系的研究，进一步对足球比赛表现分析进行完善。 第一个研究对本论文的数据源--OPTA Sportsdata公司的足球比赛数据的信效度进行了实验检验。实验中，两组数据收集人员被要求对同一场西班牙足球甲级联赛的比赛进行分析。研究结果显示，两组收集人员记录下的球队比赛事件和守门员比赛行为具有高度的一致性(卡帕系数介于0.86和0.94)。收集人员输出的外场球员的比赛行为和比赛事件也具有很高的组间一致性(ICC相关系数介于0.88和1.00，标准化典型误差介于0.00和0.37)。实验结果证明了OPTA Sportsdata公司收集的足球比赛数据具有足够高的信效度。 第二、三、四个研究旨在提升足球比赛表现分析研究结果的实用性以及深度探讨比赛情境因素对足球比赛表现的影响。通过对足球运动员和运动队的比赛技战术表现进行档案创建，可以对运动员和运动队的比赛表现进行简直接而直观的呈现、评价和对比，同时，情境变量(比赛场地、球队和对手实力、比赛结果)对比赛表现的影响也可以被整合到表现档案中。本部分对2012-13赛季西班牙足球甲级联赛的参赛守门员(n = 46球员人次，744比赛场次)和外场球员(n = 409球员人次, 5288比赛场次)以及2009-10至2012-13赛季欧洲足球冠军联赛的参赛球队(n = 496比赛场次)的比赛技战术表现进行了档案创建。在表现档案中，各项比赛技战术指标的均值、标准差、中位数和大小四分位数被用来展现守门员、外场球员和球队的普遍表现和表现浮动性。方差分析(ANOVA)被用来对西甲不同水平球队的守门员、欧冠中不同水平球队在不同比赛情境下的普遍表现(各项指标的均值)进行对比，独立样本t检验被用来对比主客场比赛普遍表现的差异。数据量级推断(magnitude-based inferences)的方法则被用来对西甲前三名和最后三名球队外场球员的普遍表现进行对比分析。所有来自不同水平球队的运动员和不同水平运动队的各项比赛指标皆被转换成了标准分数，从而能把他们在各种不同比赛情境下的普遍表现(各项比赛指标的均值)投到相同的雷达图中进行直观的对比。 第五和第六个研究目的在于进行预测性足球比赛表现分析，从而跨越之前固有的描述性和对比性分析。广义线性模型和广义混合线性模型被用来对2014年巴西世界杯小组赛(n = 48 比赛场次，38小分差场次)和2012-13赛季西甲联赛(n = 320小分差场次)的比赛中各表现相关比赛事件、行为和变量与比赛结果(胜、平、负)的关系进行建模。模型中的关系通过数据量级推断(magnitude-based inferences)的方法来界定，具体表现为某个变量增加两个标准差对比赛结果的影响(每10场比赛中额外取胜或失利的场数)。研究结果显示，在2014年巴西世界杯小组赛的所有48场比赛中，9个变量(射门、射正、反击中射门、禁区内射门、控球、短传、连续传球平均次数、高空球争抢成功率和抢断)与赢球概率有清晰的正相关关系，4个变量(射门被封堵、传中、过人和红牌)与赢球概率有清晰的负相关关系，其他12个被分析的变量与赢球概率的相关关系微小或不清晰。而在38场小分差比赛中，高空球争抢成功率由正相关变为微小关系，黄牌则由微小关系变为清晰的负相关。在西甲联赛中，每一支球队增加两个标准差的“射正球门”可以给每10场比赛带来3.4场额外胜利(99%置信区间±1.0场)，而所有球队作为一个整体，每增加两个标准差的“射正球门”可以给每10场比赛带来1.7场额外胜利(99%置信区间±1.0场)。其他大多数比赛相关事件与比赛结果的相关关系与“控球”相关联。每一支球队增加两个标准差的“控球”将会给每10场比赛带来1.2场额外失利(99%置信区间±1.0场)，而所有球队作为一个整体，每增加两个标准差的“控球”可以给每10场比赛带来1.7场额外胜利(99%置信区间±1.4场)。与客场比赛相对，主场能给球队带来1.9 /10场额外胜利(99%置信区间±0.9场)。 比赛表现档案和模型中得出的研究结果可以为俱乐部、足球队、教练组、表现分析师和运动员提供详细而直接的参考信息。这些信息可用于训练指导、赛前备战、赛中技战术调整和赛后技战术表现分析，也可运用于足球运动员选材、培养和发展。

Contribuciones en sistemas de adquisición de datos inteligentes para entornos de fusión por confinamiento magnético

Los sistemas de adquisición de datos utilizados en los diagnósticos de los dispositivos de fusión termonuclear se enfrentan a importantes retos planteados en los dispositivos de pulso largo. Incluso en los dispositivos de pulso corto, en los que se analizan los datos después de la descarga, existen aún una gran cantidad de datos sin analizar, lo cual supone que queda una gran cantidad de conocimiento por descubrir dentro de las bases de datos existentes. En la última década, la comunidad de fusión ha realizado un gran esfuerzo para mejorar los métodos de análisis off‐line para mejorar este problema, pero no se ha conseguido resolver completamente, debido a que algunos de estos métodos han de resolverse en tiempo real. Este paradigma lleva a establecer que los dispositivos de pulso largo deberán incluir dispositivos de adquisición de datos con capacidades de procesamiento local, capaces de ejecutar avanzados algoritmos de análisis. Los trabajos de investigación realizados en esta tesis tienen como objetivo determinar si es posible incrementar la capacidad local de procesamiento en tiempo real de dichos sistemas mediante el uso de GPUs. Para ello durante el trascurso del periodo de experimentación realizado se han evaluado distintas propuestas a través de casos de uso reales elaborados para algunos de los dispositivos de fusión más representativos como ITER, JET y TCV. Las conclusiones y experiencias obtenidas en dicha fase han permitido proponer un modelo y una metodología de desarrollo para incluir esta tecnología en los sistemas de adquisición para diagnósticos de distinta naturaleza. El modelo define no sólo la arquitectura hardware óptima para realizar dicha integración, sino también la incorporación de este nuevo recurso de procesamiento en los Sistemas de Control de Supervisión y Adquisición de Datos (SCADA) utilizados en la comunidad de fusión (EPICS), proporcionando una solución completa. La propuesta se complementa con la definición de una metodología que resuelve las debilidades detectadas, y permite trazar un camino de integración de la solución en los estándares hardware y software existentes. La evaluación final se ha realizado mediante el desarrollo de un caso de uso representativo de los diagnósticos que necesitan adquisición y procesado de imágenes en el contexto del dispositivo internacional ITER, y ha sido testeada con éxito en sus instalaciones. La solución propuesta en este trabajo ha sido incluida por la ITER IO en su catálogo de soluciones estándar para el desarrollo de sus futuros diagnósticos. Por otra parte, como resultado y fruto de la investigación de esta tesis, cabe destacar el acuerdo llevado a cabo con la empresa National Instruments en términos de transferencia tecnológica, lo que va a permitir la actualización de los sistemas de adquisición utilizados en los dispositivos de fusión. ABSTRACT Data acquisition systems used in the diagnostics of thermonuclear fusion devices face important challenges due to the change in the data acquisition paradigm needed for long pulse operation. Even in shot pulse devices, where data is mainly analyzed after the discharge has finished , there is still a large amount of data that has not been analyzed, therefore producing a lot of buried knowledge that still lies undiscovered in the data bases holding the vast amount of data that has been generated. There has been a strong effort in the fusion community in the last decade to improve the offline analysis methods to overcome this problem, but it has proved to be insufficient unless some of these mechanisms can be run in real time. In long pulse devices this new paradigm, where data acquisition devices include local processing capabilities to be able to run advanced data analysis algorithms, will be a must. The research works done in this thesis aim to determining whether it is possible to increase local capacity for real‐time processing of such systems by using GPUs. For that, during the experimentation period, various proposals have been evaluated through use cases developed for several of the most representative fusion devices, ITER, JET and TCV. Conclusions and experiences obtained have allowed to propose a model, and a development methodology, to include this technology in systems for diagnostics of different nature. The model defines not only the optimal hardware architecture for achieving this integration, but also the incorporation of this new processing resource in one of the Systems of Supervision Control and Data Acquisition (SCADA) systems more relevant at the moment in the fusion community (EPICS), providing a complete solution. The final evaluation has been performed through a use case developed for a generic diagnostic requiring image acquisition and processing for the international ITER device, and has been successfully tested in their premises. The solution proposed in this thesis has been included by the ITER IO in his catalog of standard solutions for the development of their future diagnostics. This has been possible thanks to the technologic transfer agreement signed with xi National Instruments which has permitted us to modify and update one of their core software products targeted for the acquisition systems used in these devices.