Comparasion of road traffic emission models in Madrid (Spain)

Many cities in Europe have difficulties to meet the air quality standards set by the European legislation, most particularly the annual mean Limit Value for NO2. Road transport is often the main source of air pollution in urban areas and therefore, there is an increasing need to estimate current and future traffic emissions as accurately as possible. As a consequence, a number of specific emission models and emission factors databases have been developed recently. They present important methodological differences and may result in largely diverging emission figures and thus may lead to alternative policy recommendations. This study compares two approaches to estimate road traffic emissions in Madrid (Spain): the COmputer Programme to calculate Emissions from Road Transport (COPERT4 v.8.1) and the Handbook Emission Factors for Road Transport (HBEFA v.3.1), representative of the ‘average-speed’ and ‘traffic situation’ model types respectively. The input information (e.g. fleet composition, vehicle kilometres travelled, traffic intensity, road type, etc.) was provided by the traffic model developed by the Madrid City Council along with observations from field campaigns. Hourly emissions were computed for nearly 15 000 road segments distributed in 9 management areas covering the Madrid city and surroundings. Total annual NOX emissions predicted by HBEFA were a 21% higher than those of COPERT. The discrepancies for NO2 were lower (13%) since resulting average NO2/NOX ratios are lower for HBEFA. The larger differences are related to diesel vehicle emissions under “stop & go” traffic conditions, very common in distributor/secondary roads of the Madrid metropolitan area. In order to understand the representativeness of these results, the resulting emissions were integrated in an urban scale inventory used to drive mesoscale air quality simulations with the Community Multiscale Air Quality (CMAQ) modelling system (1 km2 resolution). Modelled NO2 concentrations were compared with observations through a series of statistics. Although there are no remarkable differences between both model runs, the results suggest that HBEFA may overestimate traffic emissions. However, the results are strongly influenced by methodological issues and limitations of the traffic model. This study was useful to provide a first alternative estimate to the official emission inventory in Madrid and to identify the main features of the traffic model that should be improved to support the application of an emission system based on “real world” emission factors.

Construction Cost Estimates for Residences in Spain: practical application of the Pcr.5n model

The construction cost estimation systems in Spain are undeveloped and, hence, infrequently used by technicians and professionals in the building sector. However, estimation of an approximate real cost prior to the execution of the work is compulsory under current legal regulations (Technical Building Code). Therefore, the development of research projects on construction cost estimation models such as the one described and demonstrated in this talk is extremely interesting.

An Agent Architecture to fulfill Real-Time Requirements

In this paper we present AMSIA, an agent architecture that combines the possibility of using di erent reasoning methods with a mechanism to control the resources needed by the agent to ful ll its high level objectives. The architecture is based on the blackboard paradigm which o ers the possibility of combining di erent reasoning techniques and opportunistic behavior. The AMSIA architecture adds a representation of plans of objectives allowing di erent reasoning activities to create plans to guide the future behavior of the agent. The opportunism is in the acquisition of high-level objectives and in the modi cation of the predicted activity when something doesn't happen as expected. A control mechanism is responsible for the translation of plans of objectives to concrete activities, considering resource-boundedness. To do so, all the activity in the agent (including control) is explicitly scheduled, but allowing the necessary exibility to make changes in the face of contingencies that are expected in dynamic environments. Experimental work is also presented.

Application of a building cost estimation model to the appraisal of the churches damaged by earthquakes in Lorca (Spain)

The objective of this paper is the development of a building cost estimation model whose purpose is to quickly and precisely evaluate rebuilding costs for historic heritage buildings affected by catastrophic events. Specifically, this study will be applied to the monumental buildings owned by the Catholic Church that were affected by two earthquakes on May 11, 2011 in the town of Lorca. To estimate the initial total replacement cost new, calculation model will be applied which, on the one hand, will use two-dimensional metric exterior parameters and, on the other, three-dimensional interior cubic parameters. Based on the total of the analyzed buildings, and considering damage caused by the seismic event, the final reconstruction cost for the building units ruined by the earthquakes can be estimated. The proposed calculation model can also be applied to other emergency scenarios and situations for the quick estimation of construction costs necessary for rebuilding historic heritage buildings which have been affected by catastrophic events that deteriorate or ruin their structural or constructive configuration.

Determinación de la distribución de tamaño y número de partículas provenientes de motores diesel operando en trafico real con equipos embarcados

El presente trabajo se propone determinar la distribución de tamaño y número de partículas nanométricas provenientes de motores diésel con equipos embarcados en tráfico extraurbano. Para ello, se utilizaron equipos de medición de última generación en condiciones promedio de conducción en tráfico extraurbano por más de 800 km a lo largo del trayecto Madrid-Badajoz-Madrid mediante un vehículo característico del parque automotor español y se implementaron métodos novedosos y pioneros en el registro de este tipo de emisiones. Todo ello abre el camino para líneas de investigación y desarrollo que contribuirán a entender, dimensionar y cualificar el comportamiento de las partículas, así como su impacto en la calidad de vida de la población. El estudio hace dos grandes aportes al campo. Primero, permite registrar las emisiones en condiciones transitorias propias del tráfico real. Segundo, permite mantener controladas las condiciones de medición y evita la formación aleatoria de partículas provenientes de material volátil, gracias al sistema de adecuación de la muestra de gases de escape incorporado. Como resultado, se obtuvo una muestra abundante y confiable que permitió construir modelos matemáticos para calcular la emisión de partículas nanométricas, ultrafinas, finas y totales sobre las bases volumétrica, espacial y temporal en función de la pendiente del perfil orográfico de la carretera, siempre y cuando esté dentro del intervalo ±5.0%. Estos modelos de cálculo de emisiones reducen tanto los costos de experimentación como la complejidad de los equipos necesarios, y fundamentaron el desarrollo de la primera versión de una aplicación informática que calcula las partículas emitidas por un motor diésel en condiciones de tráfico extraurbano ("Partículas Emitidas por Motores Diésel, PEMDI). ABSTRACT The purpose of this research is to determine the distribution of size and number of nanometric particles that come from diesel engines by means of on-board equipment in extra-urban traffic. In order to do this, cutting-edge measuring equipment was used under average driving conditions in extra-urban traffic for more than 800 km along the Madrid-Badajoz-Madrid route using a typical vehicle from Spain's automotive population and innovative, groundbreaking registering methods for this type of emissions were used. All this paves the way for lines of research and development which should help understand, measure and characterize the behavior of such particles, as well as their impact in the quality of life of the general population. The study makes two important contributions to the field. First, it makes it possible to register emissions under transient conditions, which are characteristic to real traffic. Secondly, it provides a means to keep the measuring conditions under control and prevents the random formation of particles of volatile origin through the built-in adjustment system of the exhaust gas sample. As a result, an abundant and reliable sample was gathered, which enabled the building of mathematical models to estimate the emission of nanometric, ultrafine, fine and total particles on volumetric, spatial and temporal bases as a function of the orographic outline of the road within a ±5.0% range. These emission estimating models lower both the experimentation costs and the required equipment's complexity, and they provided the basis for the development of a first software application version that estimates the particles emitted from diesel engines under extra-urban traffic conditions (Partículas Emitidas por Motores Diésel, PEMDI).

Housing plans and urban rehabilitation in Spain, 1992-2012

This paper explores the urban rehabilitation projects promoted by the Spanish Government between 1992 and 2012 through housing plans. The analysis is based on the comparison of programmes and estimations gathered in these plans with actual housing production within this period in order to find the connection between sectoral housing planning and real estate cycles in these last twenty years. During the period under review, six state housing plans, that were mainly focused on the promotion of newly-constructed state-subsidised housing, were developed, including the Areas of Integrated Rehabilitation programmes (ARI programmes). In spite of the relevance and growing complexity of these programmes, these played a subsidiary role in the government housing policy and were insignificant regarding the whole real estate production in this period.

Considering cycling for commuting : the role of mode familiarity : an exploration on the (circular) relation between cycling behaviours and attitudes toward cycling in Vitoria-Gasteiz, Spain

¿La gente utiliza la bicicleta porque les gusta? ¿O es el propio hecho de usarla la razón por la que les gusta hacerlo? ¿O es una combinación de las dos? Este tipo de preguntas reflejan un problema que se puede llamar ‘el círculo de la consideración de la bicicleta’: para poder considerar el uso de la bicicleta en el conjunto de posibles opciones a escoger, un individuo tiene que tener creencias positivas sobre ella, sobre todo en el caso de ‘contextos de bajo uso’. Pero parece poco probable que se formen creencias positivas cuando hay bajos niveles de familiaridad al modo, es decir, con un bajo conocimiento de sus características, su funcionamiento y del imaginario asociado; al mismo tiempo, la familiaridad irá alcanzando niveles más altos conforme aumente el tiempo y la intensidad con la que se utilice la bicicleta a lo largo de la vida de los individuos. El problema parece un circulo recursivo huevo-gallina, ya que es difícil que alguien considere el usar la bicicleta en lugares donde su uso es una práctica poco extendida. En estos lugares, y dentro del conglomerado actual de tecnologías, infraestructuras, reglas, prácticas de los usuarios y preferencias culturales que se han desarrollado alrededor del automóvil (el actual "sistema socio-técnico de la movilidad urbana", Urry 2004; Geels 2005, 2012) usar la bicicleta es considerado por la mayoría como algo difícil, inseguro, y anormal. Como consecuencia, los procesos de aumento de familiaridad con la bicicleta permanecen inactivos. La tesis asume la familiaridad como una fuente de información e influencia sobre las creencias positivas sobre la bicicleta. En ‘contextos de bajo uso’, sin familiaridad al uso de la bicicleta, estas creencias sólo pueden surgir de ciertos rasgos personales (afecto, valores, identidades, voluntad, etc.). Tal como han evidenciado investigaciones recientes, en estos contextos la posibilidad de considerar el uso de la bicicleta (y su eventual adopción), se circunscribe principalmente a los ‘entusiastas’, a los que están dispuestos a “ir contra corriente” (Horton & Parkin 2012), limitando el alcance de las políticas de promoción. La investigación llevada a cabo en esta tesis ofrece un nuevo enfoque al problema del ‘círculo de la consideración de la bicicleta’. Para ello, plantea un modelo en el que se introduce a la familiaridad como un constructo que media entre el comportamiento final –qué modo de transporte elige el individuo– y el conjunto de constructos psicosociales que preceden la elección modal (creencias y actitudes). La familiaridad al uso de la bicicleta se concibe como una medida de la intensidad relativa del uso de una bicicleta, real y percibida (basándose en Diana & Mokhtarian 2009) que puede formarse de manera distinta según sus fines (utilitarios o no utilitarios). El constructo familiaridad con el modo bicicleta está relacionado con la cantidad de tiempo, la intensidad y la regularidad con la que un individuo ha hecho uso de la bicicleta a lo largo de su vida. La familiaridad se concibe así como una condición que permite definir adecuadamente el contexto en el que se toman las decisiones modales de los individuos, en línea con investigaciones que postulan patrones de causalidad alternativos entre los procesos cognitivos de elección y los comportamientos modales (Tardif 1977; Dobson et al. 1978; Golob et al. 1979; Golob 2001; Schwanen et al. 2012; Diana et al. 2009; Vij & Walker 2014). De este modo se plantea que el esquema unidireccional actitudesconductas podría no ser completamente valido en el caso de la consideración de la bicicleta, explorando la hipótesis que sean las propias conductas a influenciar la formación de las actitudes. En esta tesis, el constructo de familiaridad se articula teórica y metodológicamente, y se emplea un instrumento de diseño transversal para contrastarlo. Los resultados de una encuesta telefónica a una muestra representativa de 736 personas en la ciudad española de Vitoria-Gasteiz proveen evidencias que sugieren –aunque de forma preliminar– que la familiaridad juega un papel de mediadora en la relación entre la utilización de la bicicleta y la formación de las creencias y actitudes hacia el su uso. La tesis emplea mediciones para cada individuo con respecto tanto a su consideración como a su familiaridad al uso de la bicicleta. Éstas mediciones se definen haciendo uso del análisis factorial exploratorio (AFE). Por un lado, el AFE arroja una estructura del constructo ‘consideración’ formada por cuatro factores, tres de ellos asociados con elementos positivos y uno con elementos negativos: (1) de cómo el uso de la bicicleta se considera verde e inteligente (G&S); (2) sobre su carácter agradable y adecuado (P&S); (3) sobre su eficacia como modo de transporte para ir al trabajo (E); y (4) sobre los principales inconvenientes de su uso, es decir, las dificultades implícitas (sudoración y estar expuestos a las inclemencias del tiempo) y la sensación de inseguridad que genera (sentirse en riesgo de accidentes y estresarse por el tráfico) (D&T). Por otro lado, la familiaridad al uso de la bicicleta se mide en dos distintas variables ordinales (según se base en el uso utilitario o no utilitario). Como resultado, se puede hablar de que cada individuo se encuentra en una de las siguientes cuatro etapas en orden creciente hacia una familiaridad completa al modo: no familiarizados; apenas familiarizados; moderadamente familiarizados; totalmente familiarizados. El análisis de los datos de los cuatro grupos de sujetos de la muestra, –definidos de acuerdo con cada una de las cuatro etapas de familiaridad definidas– ha evidenciado la existencia de diferencias intergrupo estadísticamente significativas, especialmente para la medida relacionada con el uso utilitario. Asimismo, las personas en los niveles inferiores de familiaridad tienen una consideración menor de los aspectos positivos de la bicicleta y por el contrario presentan preocupaciones mayores hacia las características negativas respecto a aquellas personas que están más familiarizados en el uso utilitario. El uso, aunque esporádico, de una bicicleta para fines utilitarios (ir de compras, hacer recados, etc.), a diferencia de no usarla en absoluto, aparece asociado a unas puntuaciones significativamente más altas en los tres factores positivos (G&S, E, P&S), mientras que parece estar asociado a puntuaciones significativamente más bajas en el factor relacionado con las características negativas (D&U). Aparecen resultados similares cuando se compara un uso moderado, con uno esporádico, sobre todo con respecto a la consideración de las características negativas. Los resultados de esta tesis están en línea con la literatura anterior que se ha basado en variables similares (por ejemplo, de Geus et al. 2008; Stinson & Bhat 2003, 2004; Hunt & Abraham 2006; y van Bekkum et al. 2011a, entre otros), pero en este estudio las diferencias se observan en un contexto de bajo uso y se derivan de un análisis de toda la población de personas que se desplazan a su lugar de trabajo o estudio, lo cual eleva la fiabilidad de los resultados. La posibilidad de que unos niveles más altos de uso de la bicicleta para fines utilitarios puedan llevar a niveles más positivos de su consideración abre el camino a implicaciones teóricas y de políticas que se discuten en la tesis. Con estos resultados se argumenta que el enfoque convencional basado en el cambio de actitudes puede no ser el único y prioritario para lograr cambios a la hora de fomentar el uso de la bicicleta. Los resultados apuntan al potencial de otros esquemas de causalidad, basados en patrones de influencia más descentrados y distribuidos, y que adopten una mirada más positiva hacia los hábitos de transporte, conceptualizándolos como “inteligencia encarnada y pre-reflexiva” (Schwanen et al. 2012). Tales esquemas conducen a un enfoque más práctico para la promoción del uso de la bicicleta, con estrategias que podrían basarse en acciones de ‘degustación’ de su uso o de mayor ‘exposición’ a su uso. Is the fact that people like cycling the reason for them to cycle? Or is the fact that they do cycle the reason for them to like cycling? Or is a combination of the two? This kind of questions reflect a problem that can be called ‘the cycle of cycling consideration’: in order to consider cycling in the set of possible options to be chosen, an individual needs to have positive beliefs about it, especially in the case of ‘low-cycling contexts’. However, positive beliefs seem unlikely to be formed with low levels of mode familiarity, say, with a low acquaintance with mode features, functioning and images; at the same time, higher levels of familiarity are likely to be reached if cycling is practised over relative threshold levels of intensities and extensively across individual life courses. The problem looks like a chicken-egg recursive cycle, since the latter condition is hardly met in places where cycling is little practised. In fact, inside the current conglomerate of technologies, infrastructures, regulations, user practices, cultural preferences that have grown around the automobile (the current “socio-technical system of urban mobility”, Urry 2004; Geels 2005, 2012) cycling is commonly considered as difficult, unsafe, and abnormal. Consequently, the processes of familiarity forming remain disabled, and, as a result, beliefs cannot rely on mode familiarity as a source of information and influence. Without cycling familiarity, origins of positive beliefs are supposed to rely only on personal traits (affect, values, identities, willingness, etc.), which, in low-cycling contexts, confine the possibility of cycling consideration (and eventual adoption) mainly to ‘cycling enthusiasts’ who are willing to “go against the grain” (Horton & Parkin 2012), as it results from previous research. New research conducted by author provides theoretical insights for a different approach of the cycling consideration problem in which the presence of the new construct of cycling familiarity is hypothesised in the relationship between mode choice behaviour and the set of psychosocial constructs that are supposed to precede it (beliefs and attitudes). Cycling familiarity is conceived as a measure of the real and the perceived relative intensity of use of a bicycle (building upon Diana & Mokhtarian 2009) which may be differently formed for utilitarian or non-utilitarian purposes. The construct is assumed to be related to the amount of time, the intensity and the regularity an individual spends in using a bicycle for the two distinct categories of purposes, gaining in this way a certain level of acquaintance with the mode. Familiarity with a mode of transport is conceived as an enabling condition to properly define the decision-making context in which individual travel mode choices are taken, in line with rather disperse research efforts postulating inverse relationships between mode behaviours and mode choices (Tardiff 1977; Dobson et al. 1978; Golob et al. 1979; Golob 2001; Schwanen et al. 2012; Diana et al. 2009; Vij & Walker 2014). The new construct is built theoretically and methodologically, and a cross-sectional design instrument is employed. Results from a telephone survey in a representative sample of 736 commuters in the Spanish city of Vitoria-Gasteiz, provide suggestive –although preliminary– evidence on the role of mode familiarity as a mediator in the relationship between cycling use and the formation of beliefs and attitudes toward cycling. Measures of both cycling consideration and cycling familiarity are defined making use of exploratory factor analysis. On the one hand, four distinct cycling consideration measures are created, based on attitude expressions on four underlying factors relating to the cycling commuting behaviour: on how cycling commuting is considered green and smart (G&S); on its pleasant and suited character (P&S); on its efficiency as a mode of transport for commuting (E); and on the main drawbacks of its use, namely the difficulties implied (sweating and being exposed to adverse weather conditions) and the sense of unsafety it generates (feeling at risk of accidents and getting stressed by traffic) (D&U). On the other hand, dimensions of cycling familiarity are measured on two distinct ordinal variables (whether based on the utilitarian or non-utilitarian use) comprising four stages to a complete mode familiarity: not familiar; barely familiar; moderately familiar; fully familiar. For each of the four stages of cycling familiarity defined, statistical significant differences are found, especially for the measure related to the utilitarian use. Consistently, people at the lower levels of cycling familiarity have a lower consideration of the positive aspects of cycling and conversely they exhibit higher concerns towards the negative characteristics than those individuals that are more familiar in utilitarian cycling. Using a bicycle occasionally for practical purposes, as opposed to not using it at all, seems associated to significant higher scores in the three positive factors (G&S, E, P&S) while it appears to be associated to significant lower scores in the factor relating with the negative characteristics of cycling commuting (D&U). A same pattern also occurs with a moderate use, as opposed to an occasional one, especially for the consideration of the negative characteristics. The results are in line with previous literature based on similar variables (e.g. de Geus et al. 2008; Stinson & Bhat 2003, 2004; Hunt & Abraham 2006; and van Bekkum et al. 2011a, among others), but in this study the differences are observed in a low-cycling context and derive from an analysis of the entire population of commuters, which rises the reliability of results.

A Valuation of SAREB, the Spanish “Bad Bank”, Upside Using the Real Options Methodology

This paper develops a model to analyze the upside potential of profitability of the SAREB (“Asset Management Company for Assets Arising from Bank Restructuring”), the Spanish “Bad Bank”. The model is based in the Real Options methodology, that is especially adequate due to the convergence of two elements, (i) depreciated assets with a high upside potential, and (ii) a highly volatile market as it has shown to be the real estate Spanish market. Our results suggest that the SAREB has a higher than expected profitability potentialthat would be dedicated to increase the return to its shareholders, mainly private banks. Consequently we also show that after the financial crisis are emerging two types of banks in Spain, in one hand the losers who are transferring their real estate assets at a deep discount, and in the other hand the winners, capturing the upside potential of those assets as shareholders of SAREB, and consequently consolidating their strength in the Spanish Real Estate Industry. It is worth to mention that Governments should make an effort in properly redistribute the wealth generated by the real Estate industry.

A Dynamically Adaptable Image Processing Application Trading Off Between High Performance, Consumption and Dependability in Real Time

As embedded systems evolve, problems inherent to technology become important limitations. In less than ten years, chips will exceed the maximum allowed power consumption affecting performance, since, even though the resources available per chip are increasing, frequency of operation has stalled. Besides, as the level of integration is increased, it is difficult to keep defect density under control, so new fault tolerant techniques are required. In this demo work, a new dynamically adaptable virtual architecture (ARTICo3) to allow dynamic and context-aware use of resources is implemented in a high performance Wireless Sensor node (HiReCookie) to perform an image processing application.

Sistema de aviso en tiempo real de la velocidad óptima para minimizar consumo respetando la duración máxima del viaje

El estilo de conducción influye significativamente en el consumo de combustible de un vehículo. En este trabajo se presenta un algoritmo que permite calcular en tiempo real el perfil de velocidades necesario para cubrir un recorrido en un tiempo determinado a la vez que optimiza el consumo de combustible. El algoritmo se basa en la Programación Dinámica y tiene en cuenta la orografía del terreno, las características del sistema propulsor del vehículo y las retenciones de tráfico para informar al conductor el perfil de velocidad que debe mantener para reducir el consumo de combustible y cumplir con el objetivo de tiempo de viaje. El algoritmo evalúa periódicamente si el conductor ha seguido las indicaciones del sistema y analiza los posibles adelantos y retrasos ocurridos durante el viaje para adaptar las recomendaciones de velocidad de los tramos siguientes de recorrido. Esta supervisión continua resulta especialmente útil en caso de encontrarse el vehículo con retenciones que le obliguen a reducir la velocidad por debajo de la recomendada, de forma que el algoritmo recalcule un nuevo perfil de velocidades en cuanto desaparezca la retención manteniendo el criterio de optimizar consumo y respetando el tiempo de llegada al destino. El algoritmo se ha probado en recorridos reales logrando ahorros de combustible significativos. También garantiza el llegar a destino según el horario marcado siempre que sea posible, respetando los límites de velocidad de la carretera.

Analysis of fire behaviour simulations over Spain with WRF-FIRE

Wildland fire spread and behaviour are complex phenomena owing to both the number of involved physico-chemical factors, and the non-linear relationship between variables. Spain is plagued by forest and brush fires every summer, when the extremely dry weather sets in along with high temperatures. The use of fire behaviour models requires the availability of high resolution environmental and fuel data; in the absence of real data, errors on the simulated fire spread can be compounded to affect the spatial and temporal accuracy of predicted data. The effect of input values on the accuracy of WRF-FIRE simulations was evaluated to assess the capabilities of the new system for wildland fire in accurately forecasting fire behaviour. The results confirm that the use of accurate meteorological data and a custom fuel moisture content model is crucial to obtain precise simulations of fire behaviour.