Planificación de una red 4G

La intensa evolución tecnológica que está experimentando nuestra sociedad en las últimas décadas hace que se estén desarrollando continuamente nuevas tecnologías que proporcionan mejoras tanto en la calidad como en la seguridad del servicio, este es el caso del 4G. A día de hoy, en España, la cuarta generación de comunicaciones móviles se ve encabezada por LTE, mientras que LTE-Advanced sólo se está implantando en las principales ciudades de nuestro país durante los últimos meses. Por este motivo, se ha creído interesante realizar una planificación sobre una zona que, hasta el momento, no está cubierta por cobertura LTE-Advanced. Además hay que tener en cuenta la naturaleza del terreno en el que trabajaremos, ya que se aleja del suelo urbano que encontramos en las principales ciudades con LTE-Advanced, como Madrid, Barcelona o Valencia. El estudio de esta zona semirural es de gran interés ya que uno de los objetivos de la cuarta generación es hacer llegar conexión a internet de calidad a lugares en los que no puede llegar la fibra óptica, como por ejemplo estas zonas semirurales. Para añadir aún más interés en el estudio, se ha decidido utilizar la banda de 800 MHz para el despliegue de la red. Esta banda que anteriormente era utilizada para la transmisión TDT, recientemente ha quedado liberada, en el conocido como Dividendo Digital para su uso en comunicaciones móviles. La tecnología LTE-Advanced se está empezando a desplegar en esta banda aunque realmente hasta Noviembre del año 2015 no tendremos un uso real de la misma, por lo que en estos momentos las redes 4G están utilizando la banda de 2.6 GHz. La utilización de la banda de 800 MHz conllevará mejoras tanto al usuario como a las operadoras, las cuales iremos viendo a lo largo del desarrollo del proyecto. La planificación pasará por distintas fases de optimización y expansión en las que se analizaran tanto la parte radioeléctrica como su capacidad. Se analizaran señales del tipo RSRP, RSSI o RSRQ y para el análisis de capacidad se definirá un conjunto de usuarios, distribuidos adecuadamente por toda la zona, que permitirá estudiar en detalle la capacidad de nuestra red. Para finalizar, se realizarán varias pruebas que demostrarán lo importante que es la tecnología MIMO tanto en LTE como en LTE-Advanced. ABSTRACT. Nowadays, our society is experiencing an intense pace of technological evolution which causes the constant development of new technologies. In the network planning area, these new technologies are focused on improving both quality and safety of service, with the recent deployment of 4G technologies in our networks. This project focuses on Spain, where the fourth generation of mobile communications is led by LTE, because LTE-Advanced has only been deployed in the largest cities, so far. The goal of this project is to plan, deploy and simulate LTE-Advanced network, of an area that hasn´t yet been covered. Furthermore, it will be taken into account the nature of the terrain where the network will be developed, as it moves away from urban areas in the major cities with LTE-Advanced, including Madrid, Barcelona and Valencia. The study of these semi-rural areas is extremely important because one of the main objectives of the fourth generation technologies is to get high-speed internet access to places that can be reached through other technologies, such as optical fiber. In order to adjust to the actual needs, the project was developed for the 800 MHz band. Those frequencies used to be assigned for digital terrestrial TV, but they have recently been released through the Digital Dividend in 2015 to use with mobile communications. That is the reason why, the LTE-Advanced technology in Spain is starting to be deployed in those frequencies. Despite the freeing of the 800 MHz band, it is not allowed to use it until November 2015, so 4G networks are currently using the 2.6 GHz band. The use of the 800 MHz band will led to advantages and improvements to users and operators, which will be detailed over the project. Each step of the planning of the 4G network is detailed. It is analyzed the optimization and expansion of the network, based on the radio and capacity premises. RSRP, RSSI or RSRQ signals were analyzed and an analysis of the network capacity was carried out. Finally, several tests are developed to show the importance of MIMO in LTE and LTE-Advanced.

Despliegue FTTH: evolución de las redes de banda ancha fijas hacia la fibra óptica

En este Proyecto se va a abordar el estudio, tanto de arquitectura como de tecnologías, de la evolución de las redes de banda ancha fijas, desde la invención del teléfono hasta la progresiva implantación de la fibra óptica, debido a que las redes de cobre serán reemplazadas por este nuevo material. Se va a estudiar esta evolución en base al medio físico en el que se apoyan las diferentes redes desde el pasado hasta nuestros días. Esta implantación de fibra óptica es conocida como FTTH, fibra hasta el hogar, donde se despliegan estas redes con sus diferentes elementos para proporcionar servicio de banda ancha a la sociedad. En esta memoria se recoge el despliegue para diferentes escenarios tipo más comunes y llevados a cabo por las diferentes compañías de telecomunicaciones del país. Para ello se ha escogido la cartografía del distrito madrileño de Moratalaz y se ha procedido a diseñar tanto la red de alimentación como la red de distribución que conforman el despliegue FTTH. Por último se ha comentado las futuras líneas de evolución de estas redes, tanto a corto plazo como a largo, analizando los beneficios económicos para las diferentes compañías encargadas de los despliegues y los mejorados servicios que ofrecen al conjunto de la sociedad. ABSTRACT. This Project will address the study of the evolution of fixed broadband networks, mainly in architectures and technologies. The study will start from the invention of telephone to the progressive implantation of optical fiber since this medium are intended to replace the copper wires employed in this networks. It will study this evolution based on the physical medium in which the different networks are supported from the past to our times. This implantation of fiber-optic technology is known as FTTH, fiber to the home, so these networks are deployed with different elements in order to provide the broadband service to society. In this report, deployment for different common cases implanted by different telecommunications companies in the country is collected. For this it has chosen the cartography of Moratalaz and has proceeded to design the supply and distribution networks that compose the FTTH deployment. Finally, it has been discussed the future lines of the evolution for these networks in the short-term and long-term analyzing the economic benefits for the companies and the improved services provided to the whole society.

Despliegue de la tecnología de fibra óptica hasta la vivienda

El presente Proyecto Fin de Grado, expone un estudio detallado del despliegue de una red FTTH para una determinada zona de viviendas. En él se podrá observar paso a paso los elementos que forman parte de las redes G-PON y las técnicas utilizadas para calcular las necesidades de cada vivienda. Este tipo de redes permite el despliegue de fibra óptica desde la central hasta la propia vivienda del abonado. La fibra óptica es el medio de transmisión de información que ofrece mejores prestaciones en cuanto a velocidad de transmisión y distancia, permitiendo ofrecer servicios que requieren de un gran ancho de banda. De esta manera, la tecnología FTTH se sitúa a la cabeza en cuanto a prestaciones frente a otras tecnologías. El principal objetivo de este despliegue es analizar el recorrido que lleva la fibra hasta llegar a la vivienda del abonado, para ello se explicará los elementos por los que pasa, los materiales y equipos que deben instalarse, las canalizaciones a utilizar y el diseño final del trazado de la fibra por las diferentes viviendas a las que queremos dar servicio. Este documento se organiza en distintos capítulos. Comienza con un capítulo donde se explican los principales objetivos de este proyecto. En el segundo capítulo se explicará la arquitectura y las principales características de las redes FTTH. En el tercer capítulo se explicaran los criterios, estructura y elementos que compone una red FTTH desde que sale de la central hasta que llega a la vivienda. Y por último, se realizará un caso práctico y real del recorrido de la fibra con sus correspondientes planos. ABSTRACT. The present Final Degree Project expounds a detailed study for the deployment of an FTTH network, for a particular housing area. We will see step by step the elements that are part of the G-PON and the techniques used to calculate the needs of each place. FTTH networks allow the deployment of optical fiber from the central office to the subcriber´s home. The optical fiber is the medium of transmission that offers the best performance in terms of speed and distance, allowing us to offer services that require high bandwidth. So, the FTTH technology takes the lead in performance over other technologies. The main objective of this deployment is to analyse the itinerary of the fiber optic to arrive to the house of the client, in order to this, it will be explained the parts that are crossed by the fiber optic, the materials and equipments that have to be instaled, the scorings and the final design of the route of the fiber optic around the houses. This document is divided in different chapters. In the first one it is explained the main objectives of this project and in the second one the architecture and main characteristics of FTTH networks. In the third chapter are described the rules, structures and elements that composed this network in order to arrive to houses. Finally, I will exemplify the previous theory with a practical case, with a real route with its plans.

Non contact inspection of the fatigue damage state of carbon fiber reinforced polymer by optical surface roughness measurements

This work presents the evaluation of a new non-contact technique to assess the fatigue damage state of CFRP structures by measuring surface roughness parameters. Surface roughness and stiffness degradation have been measured in CFRP coupons cycled with constant amplitude loads, and a Pearson?s correlation of 0.79 was obtained between both variables. Results suggest that changes on the surface roughness measured in strategic zones of components made of the evaluated CFRP, could be indicative of the level of damage due to fatigue loads. This methodology could be useful for other FRP due to similarities in the fatigue damage process.

A simplified energy consumption model for fiber-based Next Generation Access Networks

ICTs account nowadays for 2% of total carbon emissions. However, in a time when strict measures to reduce energyconsumption in all the industrial and services sectors are required, the ICT sector faces an increase in services and bandwidth demand. The deployment of NextGenerationNetworks (NGN) will be the answer to this new demand and specifically, the NextGenerationAccessNetworks (NGANs) will provide higher bandwidth access to users. Several policy and cost analysis are being carried out to understand the risks and opportunities of new deployments, though the question of which is the role of energyconsumption in NGANs seems off the table. Thus, this paper proposes amodel to analyze the energyconsumption of the main fiber-based NGAN architectures, i.e. Fiber To The House (FTTH) in both Passive Optical Network (PON) and Point-to-Point (PtP) variations, and FTTx/VDSL. The aim of this analysis is to provide deeper insight on the impact of new deployments on the energyconsumption of the ICT sector and the effects of energyconsumption on the life-cycle cost of NGANs. The paper presents also an energyconsumption comparison of the presented architectures, particularized in the specific geographic and demographic distribution of users of Spain, but easily extendable to other countries.

Influence of Current Pulse Shape on Directly Modulated Systems Performance in Metro Area Optical Networks

Due to the fact that a metro network market is very cost sensitive, direct modulated schemes appear attractive. In this paper a CWDM (Coarse Wavelength Division Multiplexing) system is studied in detail by means of an Optical Communication System Design Software; a detailed study of the modulated current shape (exponential, sine and gaussian) for 2.5 Gb/s CWDM Metropolitan Area Networks is performed to evaluate its tolerance to linear impairments such as signal-to-noise-ratio degradation and dispersion. Point-to-point links are investigated and optimum design parameters are obtained. Through extensive sets of simulation results, it is shown that some of these shape pulses are more tolerant to dispersion when compared with conventional gaussian shape pulses. In order to achieve a low Bit Error Rate (BER), different types of optical transmitters are considered including strongly adiabatic and transient chirp dominated Directly Modulated Lasers (DMLs). We have used fibers with different dispersion characteristics, showing that the system performance depends, strongly, on the chosen DML?fiber couple.

Curing, defects and mechanical performance of fiber-reinforced composites

Tradicionalmente, la fabricación de materiales compuestos de altas prestaciones se lleva a cabo en autoclave mediante la consolidación de preimpregnados a través de la aplicación simultánea de altas presiones y temperatura. Las elevadas presiones empleadas en autoclave reducen la porosidad de los componentes garantizando unas buenas propiedades mecánicas. Sin embargo, este sistema de fabricación conlleva tiempos de producción largos y grandes inversiones en equipamiento lo que restringe su aplicación a otros sectores alejados del sector aeronáutico. Este hecho ha generado una creciente demanda de sistemas de fabricación alternativos al autoclave. Aunque estos sistemas son capaces de reducir los tiempos de producción y el gasto energético, por lo general, dan lugar a materiales con menores prestaciones mecánicas debido a que se reduce la compactación del material al aplicar presiones mas bajas y, por tanto, la fracción volumétrica de fibras, y disminuye el control de la porosidad durante el proceso. Los modelos numéricos existentes permiten conocer los fundamentos de los mecanismos de crecimiento de poros durante la fabricación de materiales compuestos de matriz polimérica mediante autoclave. Dichos modelos analizan el comportamiento de pequeños poros esféricos embebidos en una resina viscosa. Su validez no ha sido probada, sin embargo, para la morfología típica observada en materiales compuestos fabricados fuera de autoclave, consistente en poros cilíndricos y alargados embebidos en resina y rodeados de fibras continuas. Por otro lado, aunque existe una clara evidencia experimental del efecto pernicioso de la porosidad en las prestaciones mecánicas de los materiales compuestos, no existe información detallada sobre la influencia de las condiciones de procesado en la forma, fracción volumétrica y distribución espacial de los poros en los materiales compuestos. Las técnicas de análisis convencionales para la caracterización microestructural de los materiales compuestos proporcionan información en dos dimensiones (2D) (microscopía óptica y electrónica, radiografía de rayos X, ultrasonidos, emisión acústica) y sólo algunas son adecuadas para el análisis de la porosidad. En esta tesis, se ha analizado el efecto de ciclo de curado en el desarrollo de los poros durante la consolidación de preimpregnados Hexply AS4/8552 a bajas presiones mediante moldeo por compresión, en paneles unidireccionales y multiaxiales utilizando tres ciclos de curado diferentes. Dichos ciclos fueron cuidadosamente diseñados de acuerdo a la caracterización térmica y reológica de los preimpregnados. La fracción volumétrica de poros, su forma y distribución espacial se analizaron en detalle mediante tomografía de rayos X. Esta técnica no destructiva ha demostrado su capacidad para analizar la microestructura de materiales compuestos. Se observó, que la porosidad depende en gran medida de la evolución de la viscosidad dinámica a lo largo del ciclo y que la mayoría de la porosidad inicial procedía del aire atrapado durante el apilamiento de las láminas de preimpregnado. En el caso de los laminados multiaxiales, la porosidad también se vio afectada por la secuencia de apilamiento. En general, los poros tenían forma cilíndrica y se estaban orientados en la dirección de las fibras. Además, la proyección de la población de poros a lo largo de la dirección de la fibra reveló la existencia de una estructura celular de un diámetro aproximado de 1 mm. Las paredes de las celdas correspondían con regiones con mayor densidad de fibra mientras que los poros se concentraban en el interior de las celdas. Esta distribución de la porosidad es el resultado de una consolidación no homogenea. Toda esta información es crítica a la hora de optimizar las condiciones de procesado y proporcionar datos de partida para desarrollar herramientas de simulación de los procesos de fabricación de materiales compuestos fuera de autoclave. Adicionalmente, se determinaron ciertas propiedades mecánicas dependientes de la matriz termoestable con objeto de establecer la relación entre condiciones de procesado y las prestaciones mecánicas. En el caso de los laminados unidireccionales, la resistencia interlaminar depende de la porosidad para fracciones volumétricas de poros superiores 1%. Las mismas tendencias se observaron en el caso de GIIc mientras GIc no se vio afectada por la porosidad. En el caso de los laminados multiaxiales se evaluó la influencia de la porosidad en la resistencia a compresión, la resistencia a impacto a baja velocidad y la resistencia a copresión después de impacto. La resistencia a compresión se redujo con el contenido en poros, pero éste no influyó significativamente en la resistencia a compresión despues de impacto ya que quedó enmascarada por otros factores como la secuencia de apilamiento o la magnitud del daño generado tras el impacto. Finalmente, el efecto de las condiciones de fabricación en el proceso de compactación mediante moldeo por compresión en laminados unidireccionales fue simulado mediante el método de los elementos finitos en una primera aproximación para simular la fabricación de materiales compuestos fuera de autoclave. Los parámetros del modelo se obtuvieron mediante experimentos térmicos y reológicos del preimpregnado Hexply AS4/8552. Los resultados obtenidos en la predicción de la reducción de espesor durante el proceso de consolidación concordaron razonablemente con los resultados experimentales. Manufacturing of high performance polymer-matrix composites is normally carried out by means of autoclave using prepreg tapes stacked and consolidated under the simultaneous application of pressure and temperature. High autoclave pressures reduce the porosity in the laminate and ensure excellent mechanical properties. However, this manufacturing route is expensive in terms of capital investment and processing time, hindering its application in many industrial sectors. This fact has driven the demand of alternative out-of-autoclave processing routes. These techniques claim to produce composite parts faster and at lower cost but the mechanical performance is also reduced due to the lower fiber content and to the higher porosity. Corrient numerical models are able to simulate the mechanisms of void growth in polymer-matrix composites processed in autoclave. However these models are restricted to small spherical voids surrounded by a viscous resin. Their validity is not proved for long cylindrical voids in a viscous matrix surrounded by aligned fibers, the standard morphology observed in out-of-autoclave composites. In addition, there is an experimental evidence of the detrimental effect of voids on the mechanical performance of composites but, there is detailed information regarding the influence of curing conditions on the actual volume fraction, shape and spatial distribution of voids within the laminate. The standard techniques of microstructural characterization of composites (optical or electron microscopy, X-ray radiography, ultrasonics) provide information in two dimensions and are not always suitable to determine the porosity or void population. Moreover, they can not provide 3D information. The effect of curing cycle on the development of voids during consolidation of AS4/8552 prepregs at low pressure by compression molding was studied in unidirectional and multiaxial panels. They were manufactured using three different curing cycles carefully designed following the rheological and thermal analysis of the raw prepregs. The void volume fraction, shape and spatial distribution were analyzed in detail by means of X-ray computed microtomography, which has demonstrated its potential for analyzing the microstructural features of composites. It was demonstrated that the final void volume fraction depended on the evolution of the dynamic viscosity throughout the cycle. Most of the initial voids were the result of air entrapment and wrinkles created during lay-up. Differences in the final void volume fraction depended on the processing conditions for unidirectional and multiaxial panels. Voids were rod-like shaped and were oriented parallel to the fibers and concentrated in channels along the fiber orientation. X-ray computer tomography analysis of voids along the fiber direction showed a cellular structure with an approximate cell diameter of 1 mm. The cell walls were fiber-rich regions and porosity was localized at the center of the cells. This porosity distribution within the laminate was the result of inhomogeneous consolidation. This information is critical to optimize processing parameters and to provide inputs for virtual testing and virtual processing tools. In addition, the matrix-controlled mechanical properties of the panels were measured in order to establish the relationship between processing conditions and mechanical performance. The interlaminar shear strength (ILSS) and the interlaminar toughness (GIc and GIIc) were selected to evaluate the effect of porosity on the mechanical performance of unidirectional panels. The ILSS was strongly affected by the porosity when the void contents was higher than 1%. The same trends were observed in the case of GIIc while GIc was insensitive to the void volume fraction. Additionally, the mechanical performance of multiaxial panels in compression, low velocity impact and compression after impact (CAI) was measured to address the effect of processing conditions. The compressive strength decreased with porosity and ply-clustering. However, the porosity did not influence the impact resistance and the coompression after impact strength because the effect of porosity was masked by other factors as the damage due to impact or the laminate lay-up. Finally, the effect of the processing conditions on the compaction behavior of unidirectional AS4/8552 panels manufactured by compression moulding was simulated using the finite element method, as a first approximation to more complex and accurate models for out-of autoclave curing and consolidation of composite laminates. The model parameters were obtained from rheological and thermo-mechanical experiments carried out in raw prepreg samples. The predictions of the thickness change during consolidation were in reasonable agreement with the experimental results.

Electrically tunable delay for trains of optical pulses

A technique to implement an electrically tunable delay line with high bandwidth for trains of ultrashort optical pulses is presented. The system is based on the temporal self-imaging effect in fiber gratings and electrooptic modulation.

Spectral behavior of a low-cost all-fiber component based on untapered multifiber unions

Untapered multifiber unions are reported to show a spectral behavior similar to the tapered ones. Their oscillatory behavior does not depend on the biconical regions. This suggests a novel way to make low-cost all-fiber devices with applications as passive components such as optical filters and wavelength multiplexers/demultiplexers. Two types of multimode fibers have been studied and information about the index profile influence has been obtained. Polarization insensitivity and temperature stability have been observed.

A panoramic view of fiber and integrated optics in spain

A general view of the present status of optics and related fields in Spain is presented. The main emphasis is on the relation between optics and some emerging areas such as Optical Communications and Nonlinear Optics. Principal activities of the more important groups are summarized.

Tunable liquid crystal-photonic crystal fiber interferometer

In this work, we present a novel interferometer based on liquid crystal and photonic crystal fiber technology. The objective of this project is the development of a tunable (switchable) modal (Mach-Zehnder) interferometer for optical communications or sensing.

Photonic liquid crystal fiber intermodal interferometer

In this work, we present a novel interferometer based on liquid crystal and photonic crystal fiber technology. The objective of this project is the development of a tunable (switchable) modal (Mach-Zehnder) interferometer for optical communications or sensing. This interferometer has been manufactured splicing a short portion (between 15 and 30 mm) of photonic crystal fiber with two single mode fiber pigtails. The study shows a high sensitivity of the interferometer to the polarization of the launching light.

Mach-Zehnder interferometer based on all-fiber multimode interference device for DPSK signal demodulation

Differential Phase Shift Keying (DPSK) modulation format has been shown as a robust solution for next-generation optical transmission systems. One key device enabling such systems is the delay interferometer, converting the signal phase information into intensity modulation to be detected by the photodiodes. Usually, Mach-Zehnder interferometer (MZI) is used for demodulating DPSK signals. In this paper, we developed an MZI which is based on all-fiber Multimode Interference (MI) structure: a multimode fiber (MMF) located between two single-mode fibers (SMF) without any transition zones. The standard MZI is not very stable since the two beams go through two different paths before they recombine. In our design the two arms of the MZI are in the same fiber, which will make it less temperature-sensitive than the standard MZI. Performance of such MZI will be analyzed from transmission spectrum. Finally such all-fiber MI-based MZI (MI-MZI) is used to demodulate 10 Gbps DPSK signals. The demodulated signals are analyzed from eye diagram and bit error rate (BER).

Optical signal impairment study of cascaded optical filters in 40 Gbps DQPSK and 100 Gbps PM-DQPSK systems

Optical filters are crucial elements in optical communications. The influence of cascaded filters in the optical signal will affect the communications quality seriously. In this paper we will study and simulate the optical signal impairment caused by different kinds of filters which include Butterworth, Bessel, Fiber Bragg Grating (FBG) and Fabry-Perot (FP). Optical signal impairment is analyzed from an Eye Opening Penalty (EOP) and optical spectrum point of view. The simulation results show that when the center frequency of all filters aligns with the laser’s frequency, the Butterworth has the smallest influence to the signal while the F-P has the biggest. With a -1dB EOP, the amount of cascaded Butterworth optical filters with a bandwidth of 50 GHz is 18 in 40 Gbps NRZ-DQPSK systems and 12 in 100 Gbps PMNRZ- DQPSK systems. The value is reduced to 9 and 6 respectively for Febry-Perot optical filters. In the situation of frequency misalignment, the impairment caused by filters is more serious. Our research shows that with a frequency deviation of 5 GHz, only 12 and 9 Butterworth optical filters can be cascaded in 40 Gbps NRZ-DQPSK and 100 Gbps PM-NRZ-DQPSK systems respectively. We also study the signal impairment caused by different orders of the Butterworth filter model. Our study shows that although the higher-order has a smaller clipping effect in the transmission spectrum, it will introduce a more serious phase ripple which seriously affects the signal. Simulation result shows that the 2nd order Butterworth filter has the best performance.

Analysis of signal impairment and crosstalk penalty induced by different types of optical filters in 100 Gbps PM-DQPSK based systems

Optical filters are crucial elements in optical communication networks. Their influence toward the optical signal will affect the communication quality seriously. In this paper we will study and simulate the optical signal impairment and crosstalk penalty caused by different kinds of filters, which include Butterworth, Bessel, Fiber Bragg Grating (FBG) and Fabry-Perot (F-P). Signal impairment from filter concatenation effect and crosstalk penalty from out-band and in-band are analyzed from Q-penalty, eye opening penalty (EOP) and optical spectrum. The simulation results show that signal impairment and crosstalk penalty induced by the Butterworth filter is the minimum among these four types of filters. Signal impairment caused by filter concatenation effect shows that when center frequency of all filters is aligned perfectly with the laser's frequency, 12 50-GHz Butterworth filters can be cascaded, with 1-dB EOP. This value is reduced to 9 when the center frequency is misaligned with 5 GHz. In the 50-GHz channel spacing DWDM networks, total Q-penalty induced by a pair of Butterworth filters based demultiplexer and multiplexer is lower than 0.5 dB when the filter bandwidth is in the range of 42-46 GHz.