Técnicas avanzadas de diseño y análisis de rendimiento en despliegues inalámbricos en interiores

En los últimos tiempos, el tráfico generado por los usuarios de redes móviles ha crecido de manera muy notable, y se prevé que dicho crecimiento se mantenga de manera continuada a lo largo de los próximos años. El tráfico gestionado por redes móviles se ha multiplicado por cinco entre los años 2010 y 2013, y las predicciones señalan un aumento de diez veces entre 2013 y 2019. De este tráfico que deben gestionar las redes móviles, una gran parte se genera en el interior de edificios. En la actualidad, éste oscila entre el 70% y el 80% del tráfico móvil total, y este porcentaje se prevé que aumente hasta cerca del 95% en los próximos años. En esta situación, con el tráfico móvil aumentando de manera exponencial, especialmente en interiores, el despliegue de soluciones específicas para estos entornos se antoja imprescindible para evitar situaciones de saturación constante de las redes móviles. Desde el punto de vista de los operadores móviles, estas soluciones permitirán limitar los problemas de cobertura, mejorar la eficiencia del uso de recursos radio y reducir el coste de las infraestructuras. Asimismo, desde el punto de vista de los usuarios, estos despliegues específicos en interiores permitirán suministrar de manera continua altas tasas de transferencia y satisfacer los altos requisitos de calidad de servicio que demandan los servicios en tiempo real. La complejidad de las actuaciones a realizar para llevar a cabo el despliegue de soluciones específicas en interiores varía considerablemente según el tipo de entorno al que están destinadas. Por un lado, las soluciones en escenarios de tipo residencial se caracterizan por despliegues masivos de transmisores realizados por los propios usuarios. De esta manera, no hay posibilidad de realizar ningún tipo de planificación previa que permita la optimización del rendimiento y solo se puede recurrir, para la mejora de éste, a métodos de autoconfiguración y autooptimización. Por otro lado, las soluciones en entornos empresariales se caracterizan por la necesidad de realizar una labor de diseño y planificación previa, cuya dificultad estará asociada a las dimensiones del escenario de despliegue y al número de transmisores necesarias. De esta labor de diseño y de la configuración de los elementos involucrados en la solución desplegada dependerá el funcionamiento adecuado de la red, el rendimiento conseguido y la calidad del servicio que se podrá suministrar a través de ésta. En esta Tesis Doctoral se abordan dos de los problemas principales en el ámbito del despliegue de soluciones específicas de interiores. El primero de ellos es la dificultad para estimar la capacidad y el rendimiento que puede garantizarse mediante soluciones autodesplegadas, y el segundo es la complejidad de diseñar y configurar despliegues de soluciones específicas de interiores en entornos empresariales que requieran un número de transmisores considerable. En el ámbito de los autodespliegues en escenarios residenciales, las principales contribuciones originales de esta Tesis Doctoral se centran en el diseño, desarrollo e implementación de procedimientos que permitan de manera sencilla y precisa la estimación de la capacidad y el rendimiento en autodespliegues. Por otro lado, en el ámbito de los despliegues en escenarios empresariales, las aportaciones originales de esta Tesis consisten en el desarrollo de nuevas técnicas que permitan el diseño automático de soluciones específicas de interiores en estos entornos. Los resultados obtenidos han permitido la creación de herramientas específicas para el análisis del rendimiento de autodespliegues en escenarios residenciales reales y para el diseño y configuración de despliegues en escenarios empresariales. Estas herramientas permiten sistematizar la aplicación práctica de las contribuciones de la presente Tesis Doctoral. ABSTRACT In recent times, the traffic generated by users of mobile networks has grown very significantly, and this increase is expected to continue steadily over the next few years. Traffic carried by mobile networks has increased fivefold between 2010 and 2013, and forecasts indicate a tenfold increase between 2013 and 2019. Furthermore, a great part of this traffic is generated inside buildings. Currently, between 70% and 80% of mobile traffic occurs inside buildings, and this percentage is expected to increase to about 95% in the coming years. In this situation, with mobile traffic growing exponentially, especially indoors, the deployment of specific solutions for these environments can be essential to avoid a constant saturation of mobile networks. On the one hand, from the point of view of mobile operators, these solutions will help to reduce the problems of coverage, improve the efficiency of radio resource usage and reduce the cost of infrastructures. Also, from the point of view of users, these specific indoor deployments can both guarantee high data transfer rates and meet the high quality of service requirements associated with real-time services. The complexity of the actions required to carry out the deployment of specific solutions indoors varies considerably depending on the type of scenario they are conceived to. On the one hand, residential scenarios are characterized by massive deployments of base stations made by the user, so there is no possibility of any prior planning. In this case only self-configuration, selfoptimization and self-healing methods can be considered for performance optimization. On the other hand, specific in-building solutions in enterprise environments requires a previous design and planning phase, whose difficulty is closely associated with the size of the deployment scenario and the number of base stations required. The design and configuration of the elements included in the solution will determine its performance and the quality of service that can be guaranteed. The objective of the present Thesis is to address two of the main issues related to specific indoor solutions, such as the difficulty of assessing the capacity and the performance which can be guaranteed by means of self-deployments and the complexity of the design and configuration of deployments in enterprise environments requiring a large number of base stations. The main contribution of this thesis consists of the development of techniques and simple tools for design and performance analysis of indoor wireless networks deployments. The main results include the development of procedures for assessing the capacity and performance of self-deployments in residential scenarios, the performance analysis of real residential self-deployments using the proposed procedures and the development of techniques for the automatic design of wireless networks in enterprise environments. The results obtained have allowed the creation of specific software tools for both the performance analysis of self-deployments and the design and deployment of in-building solutions in enterprise scenarios. These software tools are conceived to systematize the practical application of the contributions of this Thesis.

Contribución a la localización en interiores basada en comunicaciones inalámbricas

Determinar con buena precisión la posición en la que se encuentra un terminal móvil, cuando éste se halla inmerso en un entorno de interior (centros comerciales, edificios de oficinas, aeropuertos, estaciones, túneles, etc), es el pilar básico sobre el que se sustentan un gran número de aplicaciones y servicios. Muchos de esos servicios se encuentran ya disponibles en entornos de exterior, aunque los entornos de interior se prestan a otros servicios específicos para ellos. Ese número, sin embargo, podría ser significativamente mayor de lo que actualmente es, si no fuera necesaria una costosa infraestructura para llevar a cabo el posicionamiento con la precisión adecuada a cada uno de los hipotéticos servicios. O, igualmente, si la citada infraestructura pudiera tener otros usos distintos, además del relacionado con el posicionamiento. La usabilidad de la misma infraestructura para otros fines distintos ofrecería la oportunidad de que la misma estuviera ya presente en las diferentes localizaciones, porque ha sido previamente desplegada para esos otros usos; o bien facilitaría su despliegue, porque el coste de esa operación ofreciera un mayor retorno de usabilidad para quien lo realiza. Las tecnologías inalámbricas de comunicaciones basadas en radiofrecuencia, ya en uso para las comunicaciones de voz y datos (móviles, WLAN, etc), cumplen el requisito anteriormente indicado y, por tanto, facilitarían el crecimiento de las aplicaciones y servicios basados en el posicionamiento, en el caso de poderse emplear para ello. Sin embargo, determinar la posición con el nivel de precisión adecuado mediante el uso de estas tecnologías, es un importante reto hoy en día. El presente trabajo pretende aportar avances significativos en este campo. A lo largo del mismo se llevará a cabo, en primer lugar, un estudio de los principales algoritmos y técnicas auxiliares de posicionamiento aplicables en entornos de interior. La revisión se centrará en aquellos que sean aptos tanto para tecnologías móviles de última generación como para entornos WLAN. Con ello, se pretende poner de relieve las ventajas e inconvenientes de cada uno de estos algoritmos, teniendo como motivación final su aplicabilidad tanto al mundo de las redes móviles 3G y 4G (en especial a las femtoceldas y small-cells LTE) como al indicado entorno WLAN; y teniendo siempre presente que el objetivo último es que vayan a ser usados en interiores. La principal conclusión de esa revisión es que las técnicas de triangulación, comúnmente empleadas para realizar la localización en entornos de exterior, se muestran inútiles en los entornos de interior, debido a efectos adversos propios de este tipo de entornos como la pérdida de visión directa o los caminos múltiples en el recorrido de la señal. Los métodos de huella radioeléctrica, más conocidos bajo el término inglés “fingerprinting”, que se basan en la comparación de los valores de potencia de señal que se están recibiendo en el momento de llevar a cabo el posicionamiento por un terminal móvil, frente a los valores registrados en un mapa radio de potencias, elaborado durante una fase inicial de calibración, aparecen como los mejores de entre los posibles para los escenarios de interior. Sin embargo, estos sistemas se ven también afectados por otros problemas, como por ejemplo los importantes trabajos a realizar para ponerlos en marcha, y la variabilidad del canal. Frente a ellos, en el presente trabajo se presentan dos contribuciones originales para mejorar los sistemas basados en los métodos fingerprinting. La primera de esas contribuciones describe un método para determinar, de manera sencilla, las características básicas del sistema a nivel del número de muestras necesarias para crear el mapa radio de la huella radioeléctrica de referencia, junto al número mínimo de emisores de radiofrecuencia que habrá que desplegar; todo ello, a partir de unos requerimientos iniciales relacionados con el error y la precisión buscados en el posicionamiento a realizar, a los que uniremos los datos correspondientes a las dimensiones y realidad física del entorno. De esa forma, se establecen unas pautas iniciales a la hora de dimensionar el sistema, y se combaten los efectos negativos que, sobre el coste o el rendimiento del sistema en su conjunto, son debidos a un despliegue ineficiente de los emisores de radiofrecuencia y de los puntos de captura de su huella. La segunda contribución incrementa la precisión resultante del sistema en tiempo real, gracias a una técnica de recalibración automática del mapa radio de potencias. Esta técnica tiene en cuenta las medidas reportadas continuamente por unos pocos puntos de referencia estáticos, estratégicamente distribuidos en el entorno, para recalcular y actualizar las potencias registradas en el mapa radio. Un beneficio adicional a nivel operativo de la citada técnica, es la prolongación del tiempo de usabilidad fiable del sistema, bajando la frecuencia en la que se requiere volver a capturar el mapa radio de potencias completo. Las mejoras anteriormente citadas serán de aplicación directa en la mejora de los mecanismos de posicionamiento en interiores basados en la infraestructura inalámbrica de comunicaciones de voz y datos. A partir de ahí, esa mejora será extensible y de aplicabilidad sobre los servicios de localización (conocimiento personal del lugar donde uno mismo se encuentra), monitorización (conocimiento por terceros del citado lugar) y seguimiento (monitorización prolongada en el tiempo), ya que todos ellas toman como base un correcto posicionamiento para un adecuado desempeño. ABSTRACT To find the position where a mobile is located with good accuracy, when it is immersed in an indoor environment (shopping centers, office buildings, airports, stations, tunnels, etc.), is the cornerstone on which a large number of applications and services are supported. Many of these services are already available in outdoor environments, although the indoor environments are suitable for other services that are specific for it. That number, however, could be significantly higher than now, if an expensive infrastructure were not required to perform the positioning service with adequate precision, for each one of the hypothetical services. Or, equally, whether that infrastructure may have other different uses beyond the ones associated with positioning. The usability of the same infrastructure for purposes other than positioning could give the opportunity of having it already available in the different locations, because it was previously deployed for these other uses; or facilitate its deployment, because the cost of that operation would offer a higher return on usability for the deployer. Wireless technologies based on radio communications, already in use for voice and data communications (mobile, WLAN, etc), meet the requirement of additional usability and, therefore, could facilitate the growth of applications and services based on positioning, in the case of being able to use it. However, determining the position with the appropriate degree of accuracy using these technologies is a major challenge today. This paper provides significant advances in this field. Along this work, a study about the main algorithms and auxiliar techniques related with indoor positioning will be initially carried out. The review will be focused in those that are suitable to be used with both last generation mobile technologies and WLAN environments. By doing this, it is tried to highlight the advantages and disadvantages of each one of these algorithms, having as final motivation their applicability both in the world of 3G and 4G mobile networks (especially in femtocells and small-cells of LTE) and in the WLAN world; and having always in mind that the final aim is to use it in indoor environments. The main conclusion of that review is that triangulation techniques, commonly used for localization in outdoor environments, are useless in indoor environments due to adverse effects of such environments as loss of sight or multipaths. Triangulation techniques used for external locations are useless due to adverse effects like the lack of line of sight or multipath. Fingerprinting methods, based on the comparison of Received Signal Strength values measured by the mobile phone with a radio map of RSSI Recorded during the calibration phase, arise as the best methods for indoor scenarios. However, these systems are also affected by other problems, for example the important load of tasks to be done to have the system ready to work, and the variability of the channel. In front of them, in this paper we present two original contributions to improve the fingerprinting methods based systems. The first one of these contributions describes a method for find, in a simple way, the basic characteristics of the system at the level of the number of samples needed to create the radio map inside the referenced fingerprint, and also by the minimum number of radio frequency emitters that are needed to be deployed; and both of them coming from some initial requirements for the system related to the error and accuracy in positioning wanted to have, which it will be joined the data corresponding to the dimensions and physical reality of the environment. Thus, some initial guidelines when dimensioning the system will be in place, and the negative effects into the cost or into the performance of the whole system, due to an inefficient deployment of the radio frequency emitters and of the radio map capture points, will be minimized. The second contribution increases the resulting accuracy of the system when working in real time, thanks to a technique of automatic recalibration of the power measurements stored in the radio map. This technique takes into account the continuous measures reported by a few static reference points, strategically distributed in the environment, to recalculate and update the measurements stored into the map radio. An additional benefit at operational level of such technique, is the extension of the reliable time of the system, decreasing the periodicity required to recapture the radio map within full measurements. The above mentioned improvements are directly applicable to improve indoor positioning mechanisms based on voice and data wireless communications infrastructure. From there, that improvement will be also extensible and applicable to location services (personal knowledge of the location where oneself is), monitoring (knowledge by other people of your location) and monitoring (prolonged monitoring over time) as all of them are based in a correct positioning for proper performance.

Análisis prospectivo del despliegue de redes de comunicaciones móviles LTE en nuevas bandas de frecuencia mediante el desarrollo de modelos tecnoeconómicos

El estándar LTE se ha posicionado como una de las claves para que los operadores de telecomunicación puedan abordar de manera eficiente en costes el crecimiento de la demanda de tráfico móvil que se prevé para los próximos años, al ser una tecnología más escalable en el núcleo de la red y más flexible en la interfaz radio que sus predecesoras. En este sentido, es necesario también que los reguladores garanticen un acceso al espectro radioeléctrico adecuado, equitativo y no discriminatorio, que permita un entorno estable para el despliegue de redes de comunicaciones móviles avanzadas. Además de la flexibilización del marco regulador del espectro radioeléctrico en Europa, que ha permitido el despliegue de nuevas tecnologías en las bandas de frecuencia históricas de GSM, se ha puesto a disposición espectro adicional para sistemas IMT en nuevas bandas de frecuencia, lo que ha planteando a su vez nuevos retos para la tecnología y la regulación. La fragmentación del espectro disponible para comunicaciones móviles ha impulsado el desarrollo de técnicas de agregación de portadoras en las nuevas versiones del estándar LTE, que permiten explotar mejor los recursos radio en su conjunto. No obstante, el espectro inferior a 1 GHz sigue siendo escaso, ya que el tráfico móvil aumenta y la banda de 900 MHz aún se utiliza para servicios GSM, lo que no ha conseguido sino agravar la disputa entre los servicios de radiodifusión terrestre y de comunicaciones móviles por la parte superior de la banda UHF. En concreto, la banda de 700 MHz se perfila como una de las próximas para aumentar el espectro disponible para los servicios en movilidad, si bien su liberación por parte de las actuales redes de Televisión Digital Terrestre presenta no pocas dificultades en los Estados miembros en los que ésta es la principal plataforma audiovisual de acceso gratuito, abriendo un debate sobre el modelo audiovisual a largo plazo en Europa. Por otro lado, las políticas públicas de promoción del acceso a la banda ancha rápida y ultrarrápida de la presente década han establecido objetivos ambiciosos para el año 2020, tanto en el ámbito europeo como en los diferentes Estados miembros. La universalización del acceso a redes de banda ancha de al menos 30 Mbps constituye uno de los principales retos. Las expectativas generadas por la tecnología LTE y la puesta a disposición de nuevas bandas de frecuencia hace posible que los servicios de acceso fijo inalámbrico adquieran especial relevancia ante los objetivos de política pública establecidos que, como ha sido reconocido en diversas ocasiones, no podrán lograrse sino con un compendio de diferente tecnologías. Para esta Tesis Doctoral se han desarrollado una serie modelos tecnoeconómicos con el objetivo de realizar un análisis prospectivo que evalúa tres casos de especial relevancia en el despliegue de redes LTE: en primer lugar, la valoración económica de la banda de 700 MHz; en segundo lugar, la evaluación de modelos de negocio y reducción de costes considerando tecnologías femtocelulares; y finalmente, la viabilidad de las redes LTE de acceso fijo inalámbrico para el cierre de la brecha digital en el acceso a la banda ancha de 30 Mbps. En relación con la aplicación del análisis tecnoeconómico para la valoración del espectro de 700 MHz, los resultados obtenidos ponen de manifiesto dos cuestiones fundamentales. En primer lugar, la necesidad de asignar a los operadores más espectro para satisfacer las previsiones de demanda de tráfico móvil a medio plazo. En segundo, existe una diferencia notable en los costes de despliegue de una red LTE cuando se dispone de espectro en frecuencias inferiores a 1 GHz y cuando no, pero esta diferencia de costes disminuye a medida que se añade nuevo espectro sub-1GHz. De esta manera, la atribución de la banda de 700 MHz a servicios de comunicaciones móviles supone una reducción relevante en los costes de despliegue si el operador no dispone de espectro en la banda de 800 MHz, pero no así si ya dispone de espectro en bandas bajas para el despliegue. En este sentido, puede concluirse que el precio que los operadores estarán dispuestos a pagar por el espectro de la banda de 700 MHz dependerá de si ya tienen disponible espectro en la banda de 800 MHz. Sin embargo, dado que la competencia por ese espectro será menor, los ingresos esperables en las licitaciones de esta nueva banda serán en general menores, a pesar de que para algunos operadores este espectro sería tan valioso como el de 800 MHz. En segundo lugar, en relación con el despliegue de femtoceldas pueden extraerse algunas conclusiones en términos de ahorro de costes de despliegue y también de cara a la viabilidad de los modelos de negocio que posibilitan. El ahorro que supone la introducción de femtoceldas en el despliegue de una red LTE frente al caso de un despliegue exclusivamente macrocelular se ha demostrado que es mayor cuanto menor es el ancho de banda disponible para la red macrocelular. En esta línea, para un operador convergente el despliegue de femtoceldas tiene sentido económico si el ancho de banda disponible es escaso (en torno a 2x10 MHz), que, en el caso de España, puede reflejar el caso de los operadores del segmento fijo que son nuevos entrantes en el móvil. Por otro lado, los modelos de acceso abierto son interesantes para operadores exclusivamente móviles, porque consiguen flexibilizar los costes sustituyendo estaciones base macrocelulares por el despliegue de femtoceldas, pero necesitan desplegarse en zonas con una densidad de población relativamente elevada para que éstas descarguen tráfico de varios usuarios de la red macrocelular simultáneamente. No obstante, las femtoceldas son beneficiosas en todo caso si es el usuario quien asume los costes de la femtocelda y el backhaul, lo que sólo parece probable si se integran en el modelo de negocio de comercialización de nuevos servicios. Por tanto, el despliegue de femtoceldas en buena parte de la casuística estudiada sólo tiene sentido si consiguen aumentar los ingresos por usuario comercializando servicios de valor añadido que necesiten calidad de servicio garantizada y exploten a la vez de esa forma su principal ventaja competitiva respecto a la tecnología WiFi. Finalmente, en relación con el papel de la tecnología LTE para la provisión de servicios de acceso fijo inalámbrico para la banda ancha de 30 Mbps, se ha desarrollado un modelo TD-LTE y mediante la metodología de análisis tecnoeconómico se ha realizado un estudio prospectivo para el caso de España. Los resultados obtenidos preciden una huella de cobertura de FTTH del 74% para 2020, y demuestran que una red TD-LTE en la banda de 3,5 GHz resulta viable para aumentar la cobertura de servicios de 30 Mbps en 14 puntos porcentuales. Junto con la consideración de la cobertura de otras redes, la cobertura de 30 Mbps de acuerdo a la viabilidad de los despliegues alcanzaría el 95% en España en el año 2020. Como resumen, los resultados obtenidos muestran en todos los casos la capacidad de la tecnología LTE para afrontar nuevos desafíos en relación con el aumento del tráfico móvil, especialmente crítico en las zonas más urbanas, y el cierre de la brecha digital en el acceso a la banda ancha rápida en las zonas más rurales. ABSTRACT The LTE standard has been pointed out as one of the keys for telecom operators to address the demand growth in mobile traffic foreseen for the next years in a cost-efficient way, since its core network is more scalable and its radio interface more flexible than those of its predecessor technologies. On the other hand, regulators need to guarantee an adequate, equitable and non-discriminatory access to radio spectrum, which enable a favorable environment for the deployment of advanced mobile communication networks. Despite the reform of the spectrum regulatory framework in Europe, which allowed for the deployment of new technologies in the historic GSM bands, additional spectrum has been allocated to IMT systems in new frequency bands, what in turn has set out new challenges for technology and regulation. The current fragmentation of available spectrum in very different frequency bands has boosted the development of carrier aggregation techniques in most recent releases of the LTE standard, which permit a better exploitation of radio resources as a whole. Nonetheless, spectrum below 1 GHz is still scarce for mobile networks, since mobile traffic increases at a more rapid pace than spectral efficiency and spectrum resources. The 900 MHz frequency band is still being used for GSM services, what has worsen the dispute between mobile communication services and terrestrial broadcasting services for the upper part of the UHF band. Concretely, the 700 MHz frequency band has been pointed out as one of the next bands to be allocated to mobile in order to increase available spectrum. However, its release by current Digital Terrestrial Television networks is challenging in Member States where it constitutes the main free access audiovisual platform, opening up a new debate around the audiovisual model in the long term in Europe. On the other hand, public policies of the present decade to promote fast and ultrafast broadband access has established very ambitious objectives for the year 2020, both at European and national levels. Universalization of 30 Mbps broadband access networks constitutes one of the main challenges. Expectations raised by LTE technology and the allocation of new frequency bands has lead fixed wireless access (FWA) services to acquire special relevance in light of public policy objectives, which will not be met but with a compendium of different technologies, as different involved stakeholders have acknowledged. This PhD Dissertation develops techno-economic models to carry out a prospective analysis for three cases of special relevance in LTE networks’ deployment: the spectrum pricing of the 700 MHz frequency band, an assessment of new business models and cost reduction considering femtocell technologies, and the feasibility of LTE fixed wireless access networks to close the 30 Mbps broadband access gap in rural areas. In the first place and regarding the application of techno-economic analysis for 700 MHz spectrum pricing, obtained results reveal two core issues. First of all, the need to allocate more spectrum for operators in order to fulfill mobile traffic demand in the mid-term. Secondly, there is a substantial difference in deployment costs for a LTE network when there is sub-1GHz spectrum available and when there is not, but this difference decreases as additional sub-1GHz spectrum is added. Thus, the allocation of 700 MHz band to mobile communication services would cause a relevant reduction in deployment costs if the operator does not count on spectrum in the 800 MHz, but not if it already has been assigned spectrum in low frequencies for the deployment. In this regard, the price operators will be willing to pay for 700 MHz spectrum will depend on them having already spectrum in the 800 MHz frequency band or not. However, since competition for the new spectrum will not be so strong, expected incomes from 700 MHz spectrum awards will be generally lower than those from the digital dividend, despite this spectrum being as valuable as 800 MHz spectrum for some operators. In the second place, regarding femtocell deployment, some conclusions can be drawn in terms of deployment cost savings and also with reference to the business model they enable. Savings provided by a joint macro-femto LTE network as compared to an exclusively macrocellular deployment increase as the available bandwidth for the macrocells decreases. Therefore, for a convergent operator the deployment of femtocells can only have economic sense if the available bandwidth is scarce (around 2x10 MHz), which might be the case of fix market operators which are new entrant in mobile market. Besides, open access models are interesting for exclusively mobile operators, since they make costs more flexible by substituting macrocell base stations by femtocells, but they need to be deployed relatively densely populated areas so that they can offload traffic from several macrocell users simultaneously. Nonetheless, femtocells are beneficial in all cases if the user assumes both femtocell and backhaul costs, which only seems probable if they are integrated in a business model commercializing new services. Therefore, in many of the cases analyzed femtocell deployment only makes sense if they increase revenues per user through new added value services which need from guaranteed quality of service, thus exploiting its main competitive advantage compared to WiFi. Finally, regarding the role of LTE technology in the provision of fixed wireless access services for 30 Mbps broadband, a TD-LTE model has been developed and a prospective study has been carried out through techno-economic methodology for the Spanish case. Obtained results foresee a FTTH coverage footprint of 74% households for 2020, and prove that a TD-LTE network in the 3.5 GHz band results feasible to increase 30 Mbps service coverage in additional 14 percentage points. To sum up, obtained results show LTE technology capability to address new challenges regarding both mobile traffic growth, particularly critical in urban zones, and the current digital divide in fast broadband access in most rural zones.

Detecting unknown attacks in wireless sensor networks that contain mobile nodes

As wireless sensor networks are usually deployed in unattended areas, security policies cannot be updated in a timely fashion upon identification of new attacks. This gives enough time for attackers to cause significant damage. Thus, it is of great importance to provide protection from unknown attacks. However, existing solutions are mostly concentrated on known attacks. On the other hand, mobility can make the sensor network more resilient to failures, reactive to events, and able to support disparate missions with a common set of sensors, yet the problem of security becomes more complicated. In order to address the issue of security in networks with mobile nodes, we propose a machine learning solution for anomaly detection along with the feature extraction process that tries to detect temporal and spatial inconsistencies in the sequences of sensed values and the routing paths used to forward these values to the base station. We also propose a special way to treat mobile nodes, which is the main novelty of this work. The data produced in the presence of an attacker are treated as outliers, and detected using clustering techniques. These techniques are further coupled with a reputation system, in this way isolating compromised nodes in timely fashion. The proposal exhibits good performances at detecting and confining previously unseen attacks, including the cases when mobile nodes are compromised.

Opportunities and challenges of mobile social networks

Increasing availability (andaffordability) of mobile broadband - In 2015 half of the subscriber base will be in 3G/4G, and 80% in 2020 (27% in 2011) - 7.6 billion mobile users by 2020 (5.4 billion in 2011). Mobile subscribers per 100 inhabitants:99%. Increasing availability (and affordability) of smartphones - In 2020 81% of phones sold globally will be smartphones (2.5 billion) from 26% in 2011 (400 million) - 595 million tablets in 2020 (70 million in 2011)

Contribution to integration and coordination mechanisms for mobile distributed services in publish/subscribe networks

Esta tesis doctoral está enmarcada en dos diferentes pero complementarias áreas de investigación: las redes de Publicación/Subscripción y los servicios móviles distribuidos. Con el paso de los años las redes de Publicación/Subscripción han ido ofreciendo el soporte de comunicaciones desacopladas y ligeras que a su vez, han mejorado la distribución de la información en muchos escenarios de aplicación como lo son la ejecución de servicios distribuidos en entornos fijos. Los servicios móviles distribuidos han de ser desplegados en ambientes inalámbricos en donde los dispositivos móviles deben confiar en las mismas características que las redes de Publicación/Subscripción han estado ofreciendo a sus contrapartes fijos. En este contexto, una de las líneas de investigación pendientes consiste en cómo tomar ventaja de estas características, y cómo avanzar hacia nuevas soluciones no existentes con el fin de mejorar la integración entre los dispositivos fijos y móviles, y la ejecución de los servicios móviles distribuidos. En esta tesis doctoral se pretende avanzar en los mecanismos de integración y coordinación de los servicios móviles distribuidos en el contexto de las redes de Publicación/Subscripción. Los objetivos específicos de esta disertación están enfocados en lograr la integración de los sistemas de Publicación/Suscripción fijos y móviles, y la pro-visión de una versión de red de Publicación/Subscripción específica y uniforme que cuente con mecanismos de coordinación que mejoren la ejecución de los servicios móviles distribuidos. Los resultados de esta tesis doctoral están enmarcados en una versión específica de una red de Publicación/Subscripción que integra brokers fijos y móviles, y permite una coordinación totalmente desacoplada y mejorada entre dispositivos móviles que ejecutan fragmentos de servicios. Las contribuciones específicas son las siguientes: una nueva arquitectura de broker móvil que he llamado Rendezvous Mobile broker, un modelo abstracto de servicios móviles distribuidos coordinados sobre una red de Publicación/Subscripción, mejoras en los mecanismos de enrutamiento epidémicos para diseminar eventos de control producidos por fragmentos de servicios, una solución para soportar servicios altamente fragmentados y geográficamente dispersos, y finalmente una solución de interconexión entre dos dominios de red basados en Publicación/Subscripción: una red basada en el protocolo PubSubHubbub y otro en una red basada en el Publish/Subscribe Internet Routing Paradigm (PSIRP). Los experimentos llevados a cabo confirman que la versión específica de red de Pu-blicación/Subscripción propuesta incrementa el rendimiento de la red en términos de tiempo de espera entre nodos finales, permite una coordinación de los servicios móviles distribuidos más resistente a interrupciones y un mejor uso de los recursos de red, y finalmente logra exitosamente, con variaciones mínimas en el rendimiento de las comunicaciones, la interconexión entre estos dominios de Publicación/Subscripción diferentes. ABSTRACT This dissertation is made up of two different but complementary research areas: Publish/Subscribe networks and mobile distributed services. Over the years, Publish/Subscribe networks have been offering the lightweight and decoupled communication characteristics to improve the information distribution in several application domains such as the execution of distributed services. Mobile distributed services are set to be deployed in wireless environments where mobile devices must rely on the same features Publish/Subscribe networks can offer; so one of the pending research directions consists of how to take advantage of these features and further advance to-wards new un-existing solutions that enhance the integration between mobile and fixed systems and the execution of mobile distributed services. This dissertation seeks to advance the integration and coordination mechanisms of mobile distributed services in the context of Publish/Subscribe networks. The specific objectives aim to enable the integration of mobile and fixed Publish/Subscribe systems and provide a uniform and specific version of a Publish/Subscribe network with new coordination mechanisms that improve the execution of mobile distributed services. The results of this dissertation are enclosed in one specific version of a Publish/Subscribe network that integrates mobile and fixed brokers and coordinates the execution of mobile distributed services. These specific contributions are: a new architecture of a mobile broker I called Rendezvous Mobile Broker, an abstract model for coordinating mobile distributed services executions using a Publish/Subscribe net-work, new gossip routing solutions to disseminate events of services, mechanisms to support highly partitioned and geographically dispersed services and finally, an inter-networking solution between two Publish/Subscribe domains: a PubSubHubbub-based network and the Publish/Subscribe Internet Routing Paradigm (PSIRP)-based network. The experimental efforts confirm that the specific version of the Publish/Subscribe proposed in this dissertation improves the performance of the overall network in terms of end-to-end delay, enables a more resilience execution of mobile distributed services, a better usage of the existing network resources, and finally successfully achieves, with minor variations in the network performance, the internetworking between two different Publish/Subscribe domains.

Assessment of troughput performance under NS2 in Mobile Ad Hoc Networks (MANETs)

Providing QoS in the context of Ad Hoc networks includes a very wide field of application from the perspective of every level of the architecture in the network.In order for simulation studies to be useful, it is very important that the simulation results match as closely as possible with the test bed results. In this Paper, we study the throughput performance (parameter QoS) in Mobile Ad Hoc Networks (MANETs) and compares emulated test bed results with simulation results from NS2 (Network Simulator). The performance of the Mobile Ad Hoc Networks is very sensitive to the number of users and the offered load. When the number of users/offered load is high then the collisions increase resulting in larger wastage of the medium and lowering overall throughput. The aim of this research is to compare the throughput of Mobile Ad Hoc Networks using three different scenarios: 97, 100 and 120 users (nodes) using simulator NS2. By analyzing the graphs in MANETs, it is concluded When the number of users o nodes is increased beyond the certain limit, throughput decreases.

Integration of low-cost supervisory mobile robots in domestic wireless sensor networks

This paper presents a communication interface between supervisory low-cost mobile robots and domestic Wireless Sensor Network (WSN) based on the Zig Bee protocol from different manufacturers. The communication interface allows control and communication with other network devices using the same protocol. The robot can receive information from sensor devices (temperature, humidity, luminosity) and send commands to actuator devices (lights, shutters, thermostats) from different manufacturers. The architecture of the system, the interfaces and devices needed to establish the communication are described in the paper.

A low power routing algorithm for localization in IEEE 802.15.4 networks

Many context-aware applications rely on the knowledge of the position of the user and the surrounding objects to provide advanced, personalized and real-time services. In wide-area deployments, a routing protocol is needed to collect the location information from distant nodes. In this paper, we propose a new source-initiated (on demand) routing protocol for location-aware applications in IEEE 802.15.4 wireless sensor networks. This protocol uses a low power MAC layer to maximize the lifetime of the network while maintaining the communication delay to a low value. Its performance is assessed through experimental tests that show a good trade-off between power consumption and time delay in the localization of a mobile device.

Analyzing Business Models for Mobile Augmented Reality

Nowadays, a wide offer of mobile augmented reality (mAR) applications is available at the market, and the user base of mobile AR-capable devices -smartphones- is rapidly increasing. Nevertheless, likewise to what happens in other mobile segments, business models to put mAR in value are not clearly defined yet. In this paper, we focus on sketching the big picture of the commercial offer of mAR applications, in order to inspire a posterior analysis of business models that may successfully support the evolution of mAR. We have gathered more than 400 mAR applications from Android Market, and analyzed the offer as a whole, taking into account some technology aspects, pricing schemes and user adoption factors. Results show, for example, that application providers are not expecting to generate revenues per direct download, although they are producing high-quality applications, well rated by the users.

Floating car data augmentation based on infrastructure sensors and neural networks

The development of new-generation intelligent vehicle technologies will lead to a better level of road safety and CO2 emission reductions. However, the weak point of all these systems is their need for comprehensive and reliable data. For traffic data acquisition, two sources are currently available: 1) infrastructure sensors and 2) floating vehicles. The former consists of a set of fixed point detectors installed in the roads, and the latter consists of the use of mobile probe vehicles as mobile sensors. However, both systems still have some deficiencies. The infrastructure sensors retrieve information fromstatic points of the road, which are spaced, in some cases, kilometers apart. This means that the picture of the actual traffic situation is not a real one. This deficiency is corrected by floating cars, which retrieve dynamic information on the traffic situation. Unfortunately, the number of floating data vehicles currently available is too small and insufficient to give a complete picture of the road traffic. In this paper, we present a floating car data (FCD) augmentation system that combines information fromfloating data vehicles and infrastructure sensors, and that, by using neural networks, is capable of incrementing the amount of FCD with virtual information. This system has been implemented and tested on actual roads, and the results show little difference between the data supplied by the floating vehicles and the virtual vehicles.

Smart parking service based on wireless sensor networks

n this paper, we present the design and implementation of a prototype system of Smart Parking Services based on Wireless Sensor Networks (WSNs) that allows vehicle drivers to effectively find the free parking places. The proposed scheme consists of wireless sensor networks, embedded web-server, central web-server and mobile phone application. In the system, low-cost wireless sensors networks modules are deployed into each parking slot equipped with one sensor node. The state of the parking slot is detected by sensor node and is reported periodically to embedded web-server via the deployed wireless sensor networks. This information is sent to central web-server using Wi-Fi networks in real-time, and also the vehicle driver can find vacant parking lots using standard mobile devices.

On the economics of energy consumption in 4G networks: the case of Spain

Reducing energy consumption is one of the main challenges in most countries. For example, European Member States agreed to reduce greenhouse gas (GHG) emissions by 20% in 2020 compared to 1990 levels (EC 2008). Considering each sector separately, ICTs account nowadays for 2% of total carbon emissions. This percentage will increase as the demand of communication services and applications steps up. At the same time, the expected evolution of ICT-based developments - smart buildings, smart grids and smart transportation systems among others - could result in the creation of energy-saving opportunities leading to global emission reductions (Labouze et al. 2008), although the amount of these savings is under debate (Falch 2010). The main development required in telecommunication networks ?one of the three major blocks of energy consumption in ICTs together with data centers and consumer equipment (Sutherland 2009) ? is the evolution of existing infrastructures into ultra-broadband networks, the so-called Next Generation Networks (NGN). Fourth generation (4G) mobile communications are the technology of choice to complete -or supplement- the ubiquitous deployment of NGN. The risk and opportunities involved in NGN roll-out are currently in the forefront of the economic and policy debate. However, the issue of which is the role of energy consumption in 4G networks seems absent, despite the fact that the economic impact of energy consumption arises as a key element in the cost analysis of this type of networks. Precisely, the aim of this research is to provide deeper insight on the energy consumption involved in the usage of a 4G network, its relationship with network main design features, and the general economic impact this would have in the capital and operational expenditures related with network deployment and usage.

The strategies associated with the migration of networks to 4G

The networks need to provide higher speeds than those offered today. For it, considering that in the spectrum radio technologies is the scarcest resource in the development of these technologies and the new developments is essential to maximize the performance of bits per hertz transmitted. Long Term Evolution optimize spectral efficiency modulations with new air interface, and more advanced algorithms radius. These capabilities is the fact that LTE is an IPbased technology that enables end-to-end offer high transmission rates per user and very low latency, ie delay in the response times of the network around only 10 milliseconds, so you can offer any realtime application. LTE is the latest standard in mobile network technology and 3GPP ensure competitiveness in the future, may be considered a technology bridge between 3G networks - current 3.5G and future 4G networks, which are expected to reach speeds of up to 1G . LTE operators provide a simplified architecture but both robust, supporting services on IP technology. The objectives to be achieved through its implementation are ambitious, first users have a wide range of added services like capabilities that currently enjoys with residential broadband access at competitive prices, while the operator will have a network fully IP-based environment, reducing the complexity and cost of the same, which will give operators the opportunity to migrate to LTE directly. A major advantage of LTE is its ability to fuse with existing networks, ensuring interconnection with the same, increasing his current coverage and allowing a data connection established by a user in the environment continue when fade the coverage LTE. Moreover, the operator has the advantage of deploying network gradually, starting initially at areas of high demand for broadband services and expand progressively in line with this. RESUMEN. Las redes necesitan proporcionar velocidades mayores a las ofertadas a día de hoy. Para ello, teniendo en cuenta que en tecnologías radio el espectro es el recurso más escaso, en la evolución de estas tecnologías y en los nuevos desarrollos es esencial maximizar el rendimiento de bits por hercio transmitido. Long Term Evolution optimiza la eficiencia espectral con nuevas modulaciones en la interfaz aire, así como los algoritmos radio más avanzado. A estas capacidades se suma el hecho de que LTE es una tecnología basada en IP de extremo a extremo que permite ofrecer altas velocidades de transmisión por usuario y latencias muy bajas, es decir, retardos en los tiempos de respuesta de la red en torno a sólo 10 milisegundos, por lo que permite ofrecer cualquier tipo de aplicación en tiempo real. LTE es el último estándar en tecnología de redes móviles y asegurará la competitividad de 3GPP en el futuro, pudiendo ser considerada una tecnología puente entre las redes 3G – 3.5G actuales y las futuras redes 4G, de las que se esperan alcanzar velocidades de hasta 1G. LTE proporcionará a las operadoras una arquitectura simplificada pero robusta a la vez, soportando servicios sobre tecnología IP. Los objetivos que se persiguen con su implantación son ambiciosos, por una parte los usuarios dispondrá de una amplia oferta de servicios añadidos con capacidades similares a las que disfruta actualmente con accesos a banda ancha residencial y a precios competitivos, mientras que el operador dispondrá de una red basada en entorno totalmente IP, reduciendo la complejidad y el costo de la misma, lo que dará a las operadoras la oportunidad de migrar a LTE directamente. Una gran ventaja de LTE es su capacidad para fusionarse con las redes existentes, asegurando la interconexión con las mismas, aumentando su actual cobertura y permitiendo que una conexión de datos establecida por un usuario en el entorno LTE continúe cuando la cobertura LTE se desvanezca. Por otra parte el operador tiene la ventaja de desplegar la red LTE de forma gradual, comenzando inicialmente por las áreas de gran demanda de servicios de banda ancha y ampliarla progresivamente en función de ésta.

Localization and Tracking in Energy-Constrained Networks with Dynamic Connectivity

Systems used for target localization, such as goods, individuals, or animals, commonly rely on operational means to meet the final application demands. However, what would happen if some means were powered up randomly by harvesting systems? And what if those devices not randomly powered had their duty cycles restricted? Under what conditions would such an operation be tolerable in localization services? What if the references provided by nodes in a tracking problem were distorted? Moreover, there is an underlying topic common to the previous questions regarding the transfer of conceptual models to reality in field tests: what challenges are faced upon deploying a localization network that integrates energy harvesting modules? The application scenario of the system studied is a traditional herding environment of semi domesticated reindeer (Rangifer tarandus tarandus) in northern Scandinavia. In these conditions, information on approximate locations of reindeer is as important as environmental preservation. Herders also need cost-effective devices capable of operating unattended in, sometimes, extreme weather conditions. The analyses developed are worthy not only for the specific application environment presented, but also because they may serve as an approach to performance of navigation systems in absence of reasonably accurate references like the ones of the Global Positioning System (GPS). A number of energy-harvesting solutions, like thermal and radio-frequency harvesting, do not commonly provide power beyond one milliwatt. When they do, battery buffers may be needed (as it happens with solar energy) which may raise costs and make systems more dependent on environmental temperatures. In general, given our problem, a harvesting system is needed that be capable of providing energy bursts of, at least, some milliwatts. Many works on localization problems assume that devices have certain capabilities to determine unknown locations based on range-based techniques or fingerprinting which cannot be assumed in the approach considered herein. The system presented is akin to range-free techniques, but goes to the extent of considering very low node densities: most range-free techniques are, therefore, not applicable. Animal localization, in particular, uses to be supported by accurate devices such as GPS collars which deplete batteries in, maximum, a few days. Such short-life solutions are not particularly desirable in the framework considered. In tracking, the challenge may times addressed aims at attaining high precision levels from complex reliable hardware and thorough processing techniques. One of the challenges in this Thesis is the use of equipment with just part of its facilities in permanent operation, which may yield high input noise levels in the form of distorted reference points. The solution presented integrates a kinetic harvesting module in some nodes which are expected to be a majority in the network. These modules are capable of providing power bursts of some milliwatts which suffice to meet node energy demands. The usage of harvesting modules in the aforementioned conditions makes the system less dependent on environmental temperatures as no batteries are used in nodes with harvesters--it may be also an advantage in economic terms. There is a second kind of nodes. They are battery powered (without kinetic energy harvesters), and are, therefore, dependent on temperature and battery replacements. In addition, their operation is constrained by duty cycles in order to extend node lifetime and, consequently, their autonomy. There is, in turn, a third type of nodes (hotspots) which can be static or mobile. They are also battery-powered, and are used to retrieve information from the network so that it is presented to users. The system operational chain starts at the kinetic-powered nodes broadcasting their own identifier. If an identifier is received at a battery-powered node, the latter stores it for its records. Later, as the recording node meets a hotspot, its full record of detections is transferred to the hotspot. Every detection registry comprises, at least, a node identifier and the position read from its GPS module by the battery-operated node previously to detection. The characteristics of the system presented make the aforementioned operation own certain particularities which are also studied. First, identifier transmissions are random as they depend on movements at kinetic modules--reindeer movements in our application. Not every movement suffices since it must overcome a certain energy threshold. Second, identifier transmissions may not be heard unless there is a battery-powered node in the surroundings. Third, battery-powered nodes do not poll continuously their GPS module, hence localization errors rise even more. Let's recall at this point that such behavior is tight to the aforementioned power saving policies to extend node lifetime. Last, some time is elapsed between the instant an identifier random transmission is detected and the moment the user is aware of such a detection: it takes some time to find a hotspot. Tracking is posed as a problem of a single kinetically-powered target and a population of battery-operated nodes with higher densities than before in localization. Since the latter provide their approximate positions as reference locations, the study is again focused on assessing the impact of such distorted references on performance. Unlike in localization, distance-estimation capabilities based on signal parameters are assumed in this problem. Three variants of the Kalman filter family are applied in this context: the regular Kalman filter, the alpha-beta filter, and the unscented Kalman filter. The study enclosed hereafter comprises both field tests and simulations. Field tests were used mainly to assess the challenges related to power supply and operation in extreme conditions as well as to model nodes and some aspects of their operation in the application scenario. These models are the basics of the simulations developed later. The overall system performance is analyzed according to three metrics: number of detections per kinetic node, accuracy, and latency. The links between these metrics and the operational conditions are also discussed and characterized statistically. Subsequently, such statistical characterization is used to forecast performance figures given specific operational parameters. In tracking, also studied via simulations, nonlinear relationships are found between accuracy and duty cycles and cluster sizes of battery-operated nodes. The solution presented may be more complex in terms of network structure than existing solutions based on GPS collars. However, its main gain lies on taking advantage of users' error tolerance to reduce costs and become more environmentally friendly by diminishing the potential amount of batteries that can be lost. Whether it is applicable or not depends ultimately on the conditions and requirements imposed by users' needs and operational environments, which is, as it has been explained, one of the topics of this Thesis.