Understanding the operation of quantum dot intermediate band solar cells

In this paper, a model for intermediate band solar cells is built based on the generally understood physical concepts ruling semiconductor device operation, with special emphasis on the behavior at low temperature. The model is compared to JL-VOC measurements at concentrations up to about 1000 suns and at temperatures down to 20 K, as well as measurements of the radiative recombination obtained from electroluminescence. The agreement is reasonable. It is found that the main reason for the reduction of open circuit voltage is an operational reduction of the bandgap, but this effect disappears at high concentrations or at low temperatures.

Symmetry considerations in the empirical k.p Hamiltonian for the study of intermediate band solar cells

With the purpose of assessing the absorption coefficients of quantum dot solar cells, symmetry considerations are introduced into a Hamiltonian whose eigenvalues are empirical. In this way, the proper transformation from the Hamiltonian's diagonalized form to the form that relates it with Γ-point exact solutions through k.p envelope functions is built accounting for symmetry. Forbidden transitions are thus determined reducing the calculation burden and permitting a thoughtful discussion of the possible options for this transformation. The agreement of this model with the measured external quantum efficiency of a prototype solar cell is found to be excellent.

Realistic performance prediction in nanostructured solar cells as a function of nanostructure dimensionality and density

The behavior of quantum dot, quantum wire, and quantum well InAs/GaAs solar cells is studied with a very simplified model based on experimental results in order to assess their performance as a function of the low bandgap material volume fraction fLOW. The efficiency of structured devices is found to exceed the efficiency of a non-structured GaAs cell, in particular under concentration, when fLOW is high; this condition is easier to achieve with quantum wells. If three different quasi Fermi levels appear with quantum dots the efficiency can be much higher.

Un nuevo papel para el gestor de I+D+i en tiempos de crisis: agente de la Responsabilidad Social Corporativa

Dentro del conocimiento, el obtenido a partir de la investigación, el desarrollo y la innovación (I+D+i) ocupa un lugar preeminente en la consecución de unos mayores niveles de competitividad por parte de los países, pero no todo el conocimiento científico obtenido acaba siendo transferido, muy especialmente en coyunturas de crisis económicas como las actuales. Por todo ello, el objetivo de este trabajo es el de proponer la generación de una mayor cantidad de gestores de I+D+i y su formación en materias relacionadas con la responsabilidad social corporativa (RSC), como elementos claves para aprovechar el conocimiento científico en beneficio de la competitividad empresarial. La metodología aplicada consiste en el análisis de los datos de un estudio que pone de manifiesto estas cuestiones para un país como España, que necesita urgentemente mejorar su competitividad para salir a la mayor brevedad posible de la crisis económica actual. Los resultados dan prueba de la importancia que podría tener la generación y formación de estos gestores en la atracción de los investigadores a las empresas mediante la puesta en marcha de políticas socialmente responsables que permitan conseguir el triple beneficio: económico, social y medioambiental.

Estudio de la Huella de Carbono de los hogares españoles: Evolución nacional (1998-2011) y por Comunidades Autónomas (2006-2011)

Las implicaciones ambientales, sociales y económicas que trae consigo el cambio climático, ponen en evidencia la creciente preocupación por desarrollar estrategias con el fin de combatirlo. El Protocolo de Kioto trajo consigo el compromiso a nivel internacional de disminuir las emisiones de origen antropogénicos. Sin embargo las emisiones mundiales siguen en aumento y nuevas estrategias deben ser desarrollas. En el presente Proyecto Fin de Carrera pone el punto de mira en las emisiones que se generan en los hogares españoles. Gracias al indicador Huella de Carbono se puede determinar de una manera rápida y eficaz las emisiones de gases de efecto invernadero que se producen de manera directas e indirectas como consecuencia del consumo de bienes y servicios. El objetivo es calcular la huella de carbono asociada a los habitantes españoles en relación a los bienes y servicios que estos consumen durante el periodo 1998-2011. La huella de carbono también es calculada para los habitantes de las diferentes Comunidades Autónomas que componen España para el periodo 2006-2011. El cálculo se realiza en base a las encuestas de los presupuestos familiares desarrolladas por el Instituto Nacional de Estadística. Los factores de emisión son obtenidos del al Método Compuesto de las Cuentas Contables. Una vez analizado los resultados, se cotejan con otros estudios para poder comparar la eficacia del método utilizado. Se evalúa el patrón y localización de las emisiones de gases de efecto invernadero en relación a las diferentes categorías de consumo de los hogares y se indicara cuáles son las que mayor huella generan. Al final del proyecto se enuncian las conclusiones de la utilización del Método Compuesto de las Cuentas Contables como herramienta de cálculo de huella de carbono y se enunciaran medidas para la reducción de la huella de carbono de los hogares.

La comunicación como factor clave en la implantación de la responsabilidad social corporativa: el caso de Crédit Agricole España

This paper considers the role of communication in the implementation of corporate social responsibility (CSR) as a vital management system for achieving advantages and motivation in employees. The paper also highlights the relevant functions assumed by information professionals to overcome communication deficiencies and lack of knowledge about these relatively new areas of responsibility. A case study of Crédit Agricole España (CAE) is presented, with results that highlight the importance of all the communication-related aspects of implementing CSR.

Políticas de esfuerzo combinado económico-laboral en la retención y atracción del conocimiento científico: un estudio del caso español

El objetivo de este trabajo es la aportación de un caso que evidencie la importancia de realizar esfuerzos tanto en el terreno económico como en el laboral para conseguir una adecuada retención y atracción del conocimiento científico. Para ello, se analizan los datos de un estudio que destaca estas cuestiones para un país como España, que necesita urgentemente mejorar su balance de movilidad investigadora. Los resultados confirman la importancia de la aplicación de estas medidas y las debilidades que presenta en este tipo de políticas el sistema nacional de investigación, desarrollo e innovación (I+D+i). Abstract: The goal of this paper is to disclose a case study which highlights the impor tance of realising effor ts at an economic and labour scale in order to reach an adequate retention and attraction of scientific knowledge. Although science has evolved during different periods through the flow of mankind and ideas, studies about international mobility of scientists are recent in time. It started mid XXth century with the brain drain phenomenon. To alleviate the loss of scientists, countries have disclosed different politics. Some countries like Singapore, Southern Korea, India and China have been successful in bringing scientists back home. Those countries have made huge effor ts in human resources investments and scientific infrastructures, so as to enforce their national R&D&I systems. Despite such experiences and despite the increasement in terms of evidences related with international scientific mobility, few studies and figures have been disclosed. The goal of this current work is to disclose data, which backs up the liability of such kind of politics that combine effor ts in economic and labour terms. For that reason, data has been analyzed from a study which highlights these key aspects for a country like Spain and which recently established a wide range of politics in order to attract scientists. Despite the increasement of financial resources, such politics have turned out unable to reach a proper balance in terms of mobility research. Such data as well as it analysis comes from the development of an annual survey to Spanish scientists during the period 2008- 2011. Based on sample data and analysis an expectations index for the coming year has been constructed. This compares the level of confidence which related the support and prestige of their national R&D&I systems in which they operate. Two groups where surveyed: young researchers which currently work in Spain and as a group are more likely to go working abroad and Spanish scientists who are currently working abroad. Samples were obtained for young researchers were the following: 2008 (217), 2009 (270), 2010 (390) and 2011 (610). In the case of Spanish scientists abroad, the following data were obtained: 2008 (218), 2009 (250), 2010 (241) and 2011 (167). Both groups assume simple random sampling, with a level of confidence of 95%. The results obtained confirm the importance of this combined effor t of labor and economic policies which presents weaknesses of Spanish national R&D&I systems and its application, so that Spain becomes a pole of excellence in terms of attraction and retention of scientific knowledge.

Guide to intermediate band solar cell research

The intermediate band solar cell (IBSC) is a solar cell that, in order to increase its efficiency over that of single gap solar cells, takes advantage of the absorption of below-bandgap energy photons by means of an intermediate band (IB) located in the semiconductor bandgap. For this process to improve the solar cell performance, the belowbandgap photon absorption has to be effective and the IB cannot limit the open-circuit voltage of the cell. In this paper we provide a guide to the new researcher interested in the idea in order he can quickly become familiar with the concept and updated with the most relevant experimental results.

The effect of Windbreaks on Railway Overheads subject to Cross-Winds at O Eixo Viaduct

A measurement investigation, at ADIF's test site at the O Eixo viaduct which is on the Spanish Santiago-Ourense high speed railway line, has been carried out during the last year. The main goal of the investigation is to study the effect of the cross-wind on railway overheads (catenaries) and the influence of the presence of windbreaks on the wind-induced motion of the railway overhead. A description of the O Eixo viaduct test site is presented in this paper, including the installed windbreaks, the sensor and power supply systems. Three catenary spans has been instrumented at the center point of the catenary span contact wire with one ultrasonic anemometer and two unidirectional accelerometers. Additionally, another ultrasonic anemometer placed in the central catenary span has been installed to provide reference wind data. Wind roses of wind speed and standard deviation of the accelerometers are presented. As expected, the four wind roses look very similar and the two dominant directions close to the perpendicular to the bridge longitudinal axes, north and south have been identified. The wind roses of the standard deviation of the acceleration shows that the acceleration of the catenary contact wire is related to the directions of the two dominant winds. The vertical standard deviation of the acceleration is higher than the horizontal one for the spans with windbreaks. It has also been observed that the presence of the windbreaks modifies the wind flow leading to a wind-induced motion of the catenary contact wire which shows a higher variability than the corresponding unprotected case. On the one hand, the baseline southerly wind configuration (south wind, windbreaks in the windward side and catenary in the leeward side) influence both the mean speed at the catenary and the turbulence intensity. On the other hand, the northerly wind configuration, windbreaks in the leeward side and catenary in the windward side, provide a reference to the response of the catenary for an unprotected railway overhead, and, as it is expected, the windbreak influence is much more reduced compared to the southerly wind configuration. Both the height of the windbreak and the eaves contribute to the increase in the turbulence intensity at the catenary contact wire height. It can be seen that the height of the windbreak plays a crucial role in the increase of turbulence intensity, much more intense than the presence of the windbreak eave.

Criteria for Ballast Flight Initiation Induced by High Speed Trains

One of the phenomena that limit the velocity of trains in high speed lines is the so- called “ballast pick-up”. It is a ballast train-induced-wind erosion (or BATIWE) that can produce damage to the train under body and the infrastructure surrounding the tracks. The analysis of the measurements taken during several passes of the train allows for a criterion of ballast flight initiation to be obtained. The first rotation of a ballast stone occurs when the impulse given to the stone (arising from the aerodynamic loading produced by the wind gust genera ted by the passing train) overpasses a critical impulse. This impulse depends on the physical properties of the stone (mass, shape, moment of inertia, etc. ...) and its posture on the track bed. The aim of this paper is to report on the experimental results obtained in the ADIF’S Brihuega (Guadalajara) test station, in the Madrid to Barcelona high speed line, and the way they can be used to support the feasibility of the definition of a criterion to evaluate the BA TIWE capability of trains. The results obtained show the feasibility of the proposed method, and contribute to a method of BATIWE characterization, which can be relevant for the development of train interoperability standardization.

Intermediate Band to Conduction Band optical absorption in ZnTe:O

ZnTe doped with high concentrations of oxygen has been proposed in previous works as intermediate band (IB) material for photovoltaic applications. The existence of extra optical transitions related to the presence of an IB has already been demonstrated in this material and it has been possible to measure the absorption coefficient of the transitions from the valence band (VB) to the IB. In this work we present the first measurement of the absorption coefficient associated to transitions from the IB to the conduction band (CB) in ZnTe:O. The samples used are 4 ?m thick ZnTe layers with or without O in a concentration ~ 1019 cm-3, which have been grown on semi-insulating GaAs substrates by molecular beam epitaxy (MBE). The IB-CB absorption coefficient peaks for photon energies ~ 0.4 eV. It is extracted from reflectance and transmittance spectra measured using Fourier Transform Infrared (FTIR) spectroscopy. Under typical FTIR measurement conditions (low light intensity, broadband spectrum) the absorption coefficient in IB-to-CB transitions reaches 700 cm-1. This is much weaker than the one observed for VB-IB absorption. This result is consistent with the fact that the IB is expected to be nearly empty of electrons under equilibrium conditions in ZnTe(:O). The absorption for VB to IB transitions is also observed in the same samples through reflectance measurements performed in the visible range using a monochromator. These measurements are compared with the quantum efficiency (QE) from solar cells fabricated under similar conditions.

InAs/AlGaAs quantum dot intermediate band solar cells with enlarged sub-bandgaps

In the last decade several prototypes of intermediate band solar cells (IBSCs) have been manufactured. So far, most of these prototypes have been based on InAs/GaAs quantum dots (QDs) in order to implement the IB material. The key operation principles of the IB theory are two photon sub-bandgap (SBG) photocurrent, and output voltage preservation, and both have been experimentally demonstrated at low temperature. At room temperature (RT), however, thermal escape/relaxation between the conduction band (CB) and the IB prevents voltage preservation. To improve this situation, we have produced and characterized the first reported InAs/AlGaAs QD-based IBSCs. For an Al content of 25% in the host material, we have measured an activation energy of 361 meV for the thermal carrier escape. This energy is about 250 meV higher than the energies found in the literature for InAs/GaAs QD, and almost 140 meV higher than the activation energy obtained in our previous InAs/GaAs QD-IBSC prototypes including a specifically designed QD capping layer. This high value is responsible for the suppression of the SBG quantum efficiency under monochromatic illumination at around 220 K. We suggest that, if the energy split between the CB and the IB is large enough, activation energies as high as to suppress thermal carrier escape at room temperature (RT) can be achieved. In this respect, the InAs/AlGaAs system offers new possibilities to overcome some of the problems encountered in InAs/GaAs and opens the path for QD-IBSC devices capable of achieving high efficiency at RT.

Metodología del análisis de imágenes digitales para el estudio del contenido de humedad en vertisoles

Desde finales del siglo pasado, el procesamiento y análisis de imágenes digitales, se ha convertido en una poderosa herramienta para la investigación de las propiedades del suelo a múltiples resoluciones, sin embargo todavía no existen los mejores resultados en cuanto a estos trabajos. El principal problema para investigar el drenaje vertical a partir de la distribución de humedad en un perfil de vertisol es la búsqueda de métodos factibles que usen este procedimiento. El objetivo general es implementar una metodología para el procesamiento y análisis de imágenes digitales, que permita caracterizar la distribución del contenido de humedad de un perfil de vertisol. Para el estudio, doce calicatas fueron excavadas en un Mazic Pellic Vertisol, seis de ellas en mayo 13/2011 y el resto en mayo 19/2011 después de moderados eventos de lluvia. Las imágenes RGB de los perfiles fueron tomadas con una cámara Kodak™; con tamaños seleccionados de 1600 x 945 píxeles cada una fue procesada para homogeneizar el brillo y se aplicaron filtros suavizadores de diferentes tamaños de ventana, hasta obtener el óptimo. Cada imagen se dividió en sus matrices componentes, seleccionando los umbrales de cada una para ser aplicado y obtener el patrón digital binario. Este último fue analizado a través de la estimación de dos exponentes fractales: dimensión de conteo de cajas (DBC) y dimensión fractal de interfase húmedo seco (Di). Además, fueron determinados tres coeficientes prefractales a la máxima resolución: número total de cajas interceptados en el plano del patrón (A), la lagunaridad fractal (λ1) y la entropía de Shannon (S1). Para todas las imágenes obtenidas, basado en la entropía, los análisis de clúster y de histogramas, el filtro espacial de 9x9 resultó ser el de tamaño de ventana óptimo. Los umbrales fueron seleccionados a partir del carácter bimodal de los histogramas. Los patrones binarios obtenidos mostraron áreas húmedas (blancas) y secas (negras) que permitieron su análisis. Todos los parámetros obtenidos mostraron diferencias significativas entre ambos conjuntos de patrones espaciales. Mientras los exponentes fractales aportan información sobre las características de llenado del patrón de humedad, los coeficientes prefractales representan propiedades del suelo investigado. La lagunaridad fractal fue el mejor discriminador entre los patrones de humedad aparente del suelo. ABSTRACT From last century, digital image processing and analysis was converted in a powerful tool to investigate soil properties at multiple resolutions, however, the best final procedure in these works not yet exist. The main problem to study vertical drainage from the moisture distribution, on a vertisol profile, is searching for suitable methods using these procedures. Our aim was to design a digital image processing methodology and its analysis to characterize the moisture content distribution of a vertisol profile. In this research, twelve soil pits were excavated on a bare Mazic Pellic Vertisol, six of them in May 13/2011 and the rest in May 19/2011 after a moderate rainfall event. Digital RGB images were taken from each vertisol pit using a Kodak™ camera selecting a size of 1600x945 pixels. Each soil image was processed to homogenized brightness and then a spatial filter with several window sizes was applied to select the optimum one. The RGB image obtained were divided in each matrix color selecting the best thresholds for each one, maximum and minimum, to be applied and get a digital binary pattern. This one was analyzed by estimating two fractal scaling exponents: box counting dimension (DBC

La educación física en la edad preescolar

La parte principal de esta tesina se basa en observaciones recogidas entre un grupo de alumnos que forman el alumnado de un jardín de infancia cuyas edades oscilan entre los tres y los cinco años. Podía haber orientado el trabajo sobre cualquiera de los beneficios que reporta la educación física a los niños preescolares pero centré la idea sobre la importancia de las bases psicomotoras en el progreso del escolar puesto que me parece un tema de gran actualidad y de carácter práctico. La educación por medio del movimiento constituye todo un mundo de posibilidades no del todo exploradas en la formación integral del individuo. Con este pequeño trabajo sólo quiero añadir mi pequeño granito de arena al tema. Antecede a este capítulo otro sobre la psicología del niño pequeño, puesto que es imposible educar sin conocer las bases psicológicas del hombre, su comportamiento y líneas de conducta. Vaya por delante mi más sincero agradecimiento a don José María Cagigal, mi profesor más querido, por haber sabido inculcarme el interés y el cariño hacia temas de la educación infantil, base de la educación del hombre.

Programming assignments automatic grading: review of tools and implementations

Automatic grading of programming assignments is an important topic in academic research. It aims at improving the level of feedback given to students and optimizing the professor time. Several researches have reported the development of software tools to support this process. Then, it is helpfulto get a quickly and good sight about their key features. This paper reviews an ample set of tools forautomatic grading of programming assignments. They are divided in those most important mature tools, which have remarkable features; and those built recently, with new features. The review includes the definition and description of key features e.g. supported languages, used technology, infrastructure, etc. The two kinds of tools allow making a temporal comparative analysis. This analysis infrastructure, etc. The two kinds of tools allow making a temporal comparative analysis. This analysis shows good improvements in this research field, these include security, more language support, plagiarism detection, etc. On the other hand, the lack of a grading model for assignments is identified as an important gap in the reviewed tools. Thus, a characterization of evaluation metrics to grade programming assignments is provided as first step to get a model. Finally new paths in this research field are proposed.