Challenges for the Multilingual Web of Data

The Web has witnessed an enormous growth in the amount of semantic information published in recent years. This growth has been stimulated to a large extent by the emergence of Linked Data. Although this brings us a big step closer to the vision of a Semantic Web, it also raises new issues such as the need for dealing with information expressed in different natural languages. Indeed, although the Web of Data can contain any kind of information in any language, it still lacks explicit mechanisms to automatically reconcile such information when it is expressed in different languages. This leads to situations in which data expressed in a certain language is not easily accessible to speakers of other languages. The Web of Data shows the potential for being extended to a truly multilingual web as vocabularies and data can be published in a language-independent fashion, while associated language-dependent (linguistic) information supporting the access across languages can be stored separately. In this sense, the multilingual Web of Data can be realized in our view as a layer of services and resources on top of the existing Linked Data infrastructure adding i) linguistic information for data and vocabularies in different languages, ii) mappings between data with labels in different languages, and iii) services to dynamically access and traverse Linked Data across different languages. In this article we present this vision of a multilingual Web of Data. We discuss challenges that need to be addressed to make this vision come true and discuss the role that techniques such as ontology localization, ontology mapping, and cross-lingual ontology-based information access and presentation will play in achieving this. Further, we propose an initial architecture and describe a roadmap that can provide a basis for the implementation of this vision.

Rate-Adaptive LDPC-based key reconciliation for high performance quantum key distribution

The postprocessing or secret-key distillation process in quantum key distribution (QKD) mainly involves two well-known procedures: information reconciliation and privacy amplification. Information or key reconciliation has been customarily studied in terms of efficiency. During this, some information needs to be disclosed for reconciling discrepancies in the exchanged keys. The leakage of information is lower bounded by a theoretical limit, and is usually parameterized by the reconciliation efficiency (or inefficiency), i.e. the ratio of additional information disclosed over the Shannon limit. Most techniques for reconciling errors in QKD try to optimize this parameter. For instance, the well-known Cascade (probably the most widely used procedure for reconciling errors in QKD) was recently shown to have an average efficiency of 1.05 at the cost of a high interactivity (number of exchanged messages). Modern coding techniques, such as rate-adaptive low-density parity-check (LDPC) codes were also shown to achieve similar efficiency values exchanging only one message, or even better values with few interactivity and shorter block-length codes.

Level Set Segmentation with Shape and Appearance Models Using Affine Moment Descriptors

We propose a level set based variational approach that incorporates shape priors into edge-based and region-based models. The evolution of the active contour depends on local and global information. It has been implemented using an efficient narrow band technique. For each boundary pixel we calculate its dynamic according to its gray level, the neighborhood and geometric properties established by training shapes. We also propose a criterion for shape aligning based on affine transformation using an image normalization procedure. Finally, we illustrate the benefits of the our approach on the liver segmentation from CT images.

IDRA (IDeal Resource Allocation): Computing ideal speedups in parallel logic programming

We present a technique to estimate accurate speedups for parallel logic programs with relative independence from characteristics of a given implementation or underlying parallel hardware. The proposed technique is based on gathering accurate data describing one execution at run-time, which is fed to a simulator. Alternative schedulings are then simulated and estimates computed for the corresponding speedups. A tool implementing the aforementioned techniques is presented, and its predictions are compared to the performance of real systems, showing good correlation.

Incorporating proactivity to context-aware recommender systems for e-learning

Recommender systems in e-learning have proved to be powerful tools to find suitable educational material during the learning experience. But traditional user request-response patterns are still being used to generate these recommendations. By including contextual information derived from the use of ubiquitous learning environments, the possibility of incorporating proactivity to the recommendation process has arisen. In this paper we describe methods to push proactive recommendations to e-learning systems users when the situation is appropriate without being needed their explicit request. As a result, interesting learning objects can be recommended attending to the user?s needs in every situation. The impact of this proactive recommendations generated have been evaluated among teachers and scientists in a real e-learning social network called Virtual Science Hub related to the GLOBAL excursion European project. Outcomes indicate that the methods proposed are valid to generate such kind of recommendations in e-learning scenarios. The results also show that the users' perceived appropriateness of having proactive recommendations is high.

An ITS architecture specification - The FOTsis project experience

The recent continuous development of Cooperative ITS has resulted in several initiatives which focus on different parts of the Cooperative environment landscape. The FOTsis project focuses on the infrastructure side of the Cooperative environment and will deploy and test 7 services designed to maximise the benefits of the integration of the road operator and infrastructure-based information providers into the ITS environment. This integration can take place in any of the stages of data collection, processing and actuations of the services, but also support and trigger external tasks such as operations of the emergency response entities, etc. This paper describes the current status of the project and focuses on the specification of the supporting architecture to the services tested: references, a brief outline of the requirements’ definition, and the FOTsis architecture proposal, with some conclusions about the architecture tests conducted. The outlook on the project’s next steps is given in the last section of the paper.

Sistema de autenticación accesible para el hogar digital

El Hogar Digital Accesible (HDA) de la ETSIST nace con el propósito de acercar las nuevas Tecnologías de la Información a las personas que precisan de necesidades concretas de accesibilidad y usabilidad, dotándoles de herramientas que les permitan aumentar su calidad de vida, confort, seguridad y autonomía. El entorno del HDA consta de elementos de control para puertas, persianas, iluminación, agua o gas, sensores de temperatura, incendios, gas, sistemas de climatización, sistemas de entretenimiento y sistemas de seguridad tales como detectores de presencia y alarmas. Todo ello apoyado sobre una arquitectura de red que proporciona una pasarela residencial y un acceso a banda ancha. El objetivo principal de este PFG ha sido el desarrollo de un sistema de autenticación para el Hogar Digital Accesible de bajo coste. La idea de integrar un sistema de autenticación en el HDA, surge de la necesidad de proteger de accesos no deseados determinados servicios disponibles dentro de un ámbito privado. Algunos de estos servicios pueden ser tales como el acceso a la lectura de los mensajes disponibles en el contestador automático, el uso de equipos multimedia, la desconexión de alarmas de seguridad o simplemente la configuración de ambientes según el usuario que esté autenticado (intensidad de luz, temperatura de la sala, etc.). En el desarrollo han primado los principios de accesibilidad, usabilidad y seguridad necesarios para la creación de un entorno no invasivo, que permitiera acreditar la identidad del usuario frente al sistema HDA. Se ha planteado como posible solución, un sistema basado en el reconocimiento de un trazo realizado por el usuario. Este trazo se usará como clave de cara a validar a los usuarios. El usuario deberá repetir el trazado que registró en el sistema para autenticarse. Durante la ejecución del presente PFG, se justificará la elección de este mecanismo de autenticación frente a otras alternativas disponibles en el mercado. Para probar la aplicación, se ha podido contar con dos periféricos de distintas gamas, el uDraw creado para la PS3 que se compone de una tableta digitalizadora y un lápiz que permite recoger los trazos realizados por el usuario de forma inalámbrica y la tableta digitalizadora Bamboo de Wacom. La herramienta desarrollada permite a su vez, la posibilidad de ser usada por otro tipo de dispositivos como es el caso del reloj con acelerómetro de 3 ejes de Texas Instruments Chronos eZ430 capaz de trasladar los movimientos del usuario al puntero de un ratón. El PFG se encuentra dividido en tres grandes bloques de flujo de trabajo. El primero se centra en el análisis del sistema y las tecnologías que lo componen, incluyendo los distintos algoritmos disponibles para realizar la autenticación basada en reconocimiento de patrones aplicados a imágenes que mejor se adaptan a las necesidades del usuario. En el segundo bloque se recoge una versión de prueba basada en el análisis y el diseño UML realizado previamente, sobre la que se efectuaron pruebas de concepto y se comprobó la viabilidad del proyecto. El último bloque incluye la verificación y validación del sistema mediante pruebas que certifican que se han alcanzado los niveles de calidad necesarios para la consecución de los objetivos planteados, generando finalmente la documentación necesaria. Como resultado del trabajo realizado, se ha obtenido un sistema que plantea una arquitectura fácilmente ampliable lograda a través del uso de técnicas como la introspección, que permiten separar la lógica de la capa de negocio del código que la implementa, pudiendo de forma simple e intuitiva sustituir código mediante ficheros de configuración, lo que hace que el sistema sea flexible y escalable. Tras la realización del PFG, se puede concluir que el producto final obtenido ha respondido de forma satisfactoria alcanzando los niveles de calidad requeridos, siendo capaz de proporcionar un sistema de autenticación alternativo a los convencionales, manteniendo unas cotas de seguridad elevadas y haciendo de la accesibilidad y el precio sus características más reseñables. ABSTRACT. Accessible Digital Home (HDA) of the ETSIST was created with the aim of bringing the latest information and communications technologies closer to the people who has special needs of accessibility and usability increasing their quality of life, comfort, security and autonomy. The HDA environment has different control elements for doors, blinds, lighting, water or gas, temperature sensors, fire protection systems, gas flashover, air conditioning systems, entertainments systems and security systems such as intruders detectors and alarms. Everything supported by an architecture net which provides a broadband residential services gateway. The main goal of this PFG was the development of a low-cost authentication system for the Accessible Digital Home. The idea of integrating an authentication system on the HDA, stems from the need to safeguard certain private key network resources from unauthorized access. Some of said resources are the access to the answering machine messages, the use of multimedia devices, the alarms deactivation or the parameter settings for each environment as programmed by the authenticated user (light intensity, room temperature, etc.). During the development priority was given to concepts like accessibility, usability and security. All of them necessary to create a non invasive environment that allows the users to certify their identity. A system based on stroke pattern recognition, was considered as a possible solution. This stroke is used as a key to validate users. The user must repeat the stroke that was saved on the system to validate access. The selection of this authentication mechanism among the others available options will be justified during this PFG. Two peripherals with different ranges were used to test the application. One of them was uDraw design for the PS3. It is wireless and is formed by a pen and a drawing tablet that allow us to register the different strokes drawn by the user. The other one was the Wacom Bamboo tablet, that supports the same functionality but with better accuracy. The developed tool allows another kind of peripherals like the 3-axes accelerometer digital wristwatch Texas Instruments Chronos eZ430 capable of transfering user movements to the mouse cursor. The PFG is divided by three big blocks that represent different workflows. The first block is focused on the system analysis and the technologies related to it, including algorithms for image pattern recognition that fits the user's needs. The second block describes how the beta version was developed based on the UML analysis and design previously done. It was tested and the viability of the project was verified. The last block contains the system verification and validation. These processes certify that the requirements have been fulfilled as well as the quality levels needed to reach the planned goals. Finally all the documentation has been produced. As a result of the work, an expandable system has been created, due to the introspection that provides the opportunity to separate the business logic from the code that implements it. With this technique, the code could be replaced throughout configuration files which makes the system flexible and highly scalable. Once the PFG has finished, it must therefore be concluded that the final product has been a success and high levels of quality have been achieved. This authentication tool gives us a low-cost alternative to the conventional ones. The new authentication system remains security levels reasonably high giving particular emphasis to the accessibility and the price.

Dynamic analysis of payloads and structures with intermediate modal density

La necesidad de desarrollar técnicas para predecir la respuesta vibroacústica de estructuras espaciales lia ido ganando importancia en los últimos años. Las técnicas numéricas existentes en la actualidad son capaces de predecir de forma fiable el comportamiento vibroacústico de sistemas con altas o bajas densidades modales. Sin embargo, ambos rangos no siempre solapan lo que hace que sea necesario el desarrollo de métodos específicos para este rango, conocido como densidad modal media. Es en este rango, conocido también como media frecuencia, donde se centra la presente Tesis doctoral, debido a la carencia de métodos específicos para el cálculo de la respuesta vibroacústica. Para las estructuras estudiadas en este trabajo, los mencionados rangos de baja y alta densidad modal se corresponden, en general, con los rangos de baja y alta frecuencia, respectivamente. Los métodos numéricos que permiten obtener la respuesta vibroacústica para estos rangos de frecuencia están bien especificados. Para el rango de baja frecuencia se emplean técnicas deterministas, como el método de los Elementos Finitos, mientras que, para el rango de alta frecuencia las técnicas estadísticas son más utilizadas, como el Análisis Estadístico de la Energía. En el rango de medias frecuencias ninguno de estos métodos numéricos puede ser usado con suficiente precisión y, como consecuencia -a falta de propuestas más específicas- se han desarrollado métodos híbridos que combinan el uso de métodos de baja y alta frecuencia, intentando que cada uno supla las deficiencias del otro en este rango medio. Este trabajo propone dos soluciones diferentes para resolver el problema de la media frecuencia. El primero de ellos, denominado SHFL (del inglés Subsystem based High Frequency Limit procedure), propone un procedimiento multihíbrido en el cuál cada subestructura del sistema completo se modela empleando una técnica numérica diferente, dependiendo del rango de frecuencias de estudio. Con este propósito se introduce el concepto de límite de alta frecuencia de una subestructura, que marca el límite a partir del cual dicha subestructura tiene una densidad modal lo suficientemente alta como para ser modelada utilizando Análisis Estadístico de la Energía. Si la frecuencia de análisis es menor que el límite de alta frecuencia de la subestructura, ésta se modela utilizando Elementos Finitos. Mediante este método, el rango de media frecuencia se puede definir de una forma precisa, estando comprendido entre el menor y el mayor de los límites de alta frecuencia de las subestructuras que componen el sistema completo. Los resultados obtenidos mediante la aplicación de este método evidencian una mejora en la continuidad de la respuesta vibroacústica, mostrando una transición suave entre los rangos de baja y alta frecuencia. El segundo método propuesto se denomina HS-CMS (del inglés Hybrid Substructuring method based on Component Mode Synthesis). Este método se basa en la clasificación de la base modal de las subestructuras en conjuntos de modos globales (que afectan a todo o a varias partes del sistema) o locales (que afectan a una única subestructura), utilizando un método de Síntesis Modal de Componentes. De este modo es posible situar espacialmente los modos del sistema completo y estudiar el comportamiento del mismo desde el punto de vista de las subestructuras. De nuevo se emplea el concepto de límite de alta frecuencia de una subestructura para realizar la clasificación global/local de los modos en la misma. Mediante dicha clasificación se derivan las ecuaciones globales del movimiento, gobernadas por los modos globales, y en las que la influencia del conjunto de modos locales se introduce mediante modificaciones en las mismas (en su matriz dinámica de rigidez y en el vector de fuerzas). Las ecuaciones locales se resuelven empleando Análisis Estadístico de Energías. Sin embargo, este último será un modelo híbrido, en el cual se introduce la potencia adicional aportada por la presencia de los modos globales. El método ha sido probado para el cálculo de la respuesta de estructuras sometidas tanto a cargas estructurales como acústicas. Ambos métodos han sido probados inicialmente en estructuras sencillas para establecer las bases e hipótesis de aplicación. Posteriormente, se han aplicado a estructuras espaciales, como satélites y reflectores de antenas, mostrando buenos resultados, como se concluye de la comparación de las simulaciones y los datos experimentales medidos en ensayos, tanto estructurales como acústicos. Este trabajo abre un amplio campo de investigación a partir del cual es posible obtener metodologías precisas y eficientes para reproducir el comportamiento vibroacústico de sistemas en el rango de la media frecuencia. ABSTRACT Over the last years an increasing need of novel prediction techniques for vibroacoustic analysis of space structures has arisen. Current numerical techniques arc able to predict with enough accuracy the vibro-acoustic behaviour of systems with low and high modal densities. However, space structures are, in general, very complex and they present a range of frequencies in which a mixed behaviour exist. In such cases, the full system is composed of some sub-structures which has low modal density, while others present high modal density. This frequency range is known as the mid-frequency range and to develop methods for accurately describe the vibro-acoustic response in this frequency range is the scope of this dissertation. For the structures under study, the aforementioned low and high modal densities correspond with the low and high frequency ranges, respectively. For the low frequency range, deterministic techniques as the Finite Element Method (FEM) are used while, for the high frequency range statistical techniques, as the Statistical Energy Analysis (SEA), arc considered as more appropriate. In the mid-frequency range, where a mixed vibro-acoustic behaviour is expected, any of these numerical method can not be used with enough confidence level. As a consequence, it is usual to obtain an undetermined gap between low and high frequencies in the vibro-acoustic response function. This dissertation proposes two different solutions to the mid-frequency range problem. The first one, named as The Subsystem based High Frequency Limit (SHFL) procedure, proposes a multi-hybrid procedure in which each sub-structure of the full system is modelled with the appropriate modelling technique, depending on the frequency of study. With this purpose, the concept of high frequency limit of a sub-structure is introduced, marking out the limit above which a substructure has enough modal density to be modelled by SEA. For a certain analysis frequency, if it is lower than the high frequency limit of the sub-structure, the sub-structure is modelled through FEM and, if the frequency of analysis is higher than the high frequency limit, the sub-structure is modelled by SEA. The procedure leads to a number of hybrid models required to cover the medium frequency range, which is defined as the frequency range between the lowest substructure high frequency limit and the highest one. Using this procedure, the mid-frequency range can be define specifically so that, as a consequence, an improvement in the continuity of the vibro-acoustic response function is achieved, closing the undetermined gap between the low and high frequency ranges. The second proposed mid-frequency solution is the Hybrid Sub-structuring method based on Component Mode Synthesis (HS-CMS). The method adopts a partition scheme based on classifying the system modal basis into global and local sets of modes. This classification is performed by using a Component Mode Synthesis, in particular a Craig-Bampton transformation, in order to express the system modal base into the modal bases associated with each sub-structure. Then, each sub-structure modal base is classified into global and local set, fist ones associated with the long wavelength motion and second ones with the short wavelength motion. The high frequency limit of each sub-structure is used as frequency frontier between both sets of modes. From this classification, the equations of motion associated with global modes are derived, which include the interaction of local modes by means of corrections in the dynamic stiffness matrix and the force vector of the global problem. The local equations of motion are solved through SEA, where again interactions with global modes arc included through the inclusion of an additional input power into the SEA model. The method has been tested for the calculation of the response function of structures subjected to structural and acoustic loads. Both methods have been firstly tested in simple structures to establish their basis and main characteristics. Methods are also verified in space structures, as satellites and antenna reflectors, providing good results as it is concluded from the comparison with experimental results obtained in both, acoustic and structural load tests. This dissertation opens a wide field of research through which further studies could be performed to obtain efficient and accurate methodologies to appropriately reproduce the vibro-acoustic behaviour of complex systems in the mid-frequency range.

iCarer Project: Intelligent Care Guidance and Learning Services Platform for Informal Carers of the Elderly

The increasing ageing population is demanding new care approaches to maintain the quality of life of elderly people. Informal carers are becoming crucial agents in the care and support of elderly people, which can lead to those carers suffering from additional stress due to competing priorities with employment or due to lack of knowledge about elderly people?s care needs. Thus, support and stress relief in carers should be a key issue in the home-care process of these older adults. Considering this context, this work presents the iCarer project aimed at developing a personalized and adaptive platform to offer informal carers support by means of monitoring their activities of daily care and psychological state, as well as providing an orientation to help them improve the care provided. Additionally, iCarer will provide e-Learning services and an informal carers learning network. As a result, carers will be able to expand their knowledge, supported by the experience provided by expert counsellors and fellow carers. Additionally, the coordination between formal and informal carers will be improved, offering the informal carers flexibility to organize and combine their assistance and social activities.

An ITS architecture specification - The FOTsis project experience

The recent continuous development of Cooperative ITS has resulted in several initiatives which focus on different parts of the Cooperative environment landscape. The FOTsis project focuses on the infrastructure side of the Cooperative environment and will deploy and test 7 services designed to maximise the benefits of the integration of the road operator and infrastructure-based information providers into the ITS environment. This paper describes the current status of the project and focuses on the road safety approach within the project: safety services and safety impact assessment. The outlook on the project's next steps is given in the last section of the paper.

Metodología para la estimación de indicadores armonizados a partir de los inventarios forestales nacionales europeos con especial énfasis en la biodiversidad forestal

Durante las últimas décadas el objetivo principal de la silvicultura y la gestión forestal en Europa ha pasado de ser la producción de madera a ser la gestión sostenible de los ecosistemas, por lo que se deben considerar todos los bienes y servicios que proporcionan los bosques. En consecuencia, es necesario contar con información forestal periódica de diversos indicadores forestales a nivel europeo para apoyar el desarrollo y la implementación de políticas medioambientales y que se realice una gestión adecuada. Para ello, se requiere un seguimiento intensivo sobre el estado de los bosques, por lo que los Inventarios Forestales Nacionales (IFN), (principal fuente de información forestal a gran escala), han aumentado el número de variables muestreadas para cumplir con los crecientes requerimientos de información. Sin embargo, las estimaciones proporcionadas por los diferentes países no son fácilmente comparables debido a las diferencias en las definiciones, los diseños de muestreo, las variables medidas y los protocolos de medición. Por esto, la armonización de los datos que proporcionan los diferentes países es fundamental para la contar con una información forestal sólida y fiable en la Unión europea (UE). La presente tesis tiene dos objetivos principales: (i) establecer el diseño de una metodología para evaluar la biodiversidad forestal en el marco del Inventario forestal nacional de España teniendo en cuenta las diferentes iniciativas nacionales e internacionales, con el objetivo de producir estimaciones comparables con las de otros países de la UE y (ii) armonizar los indicadores más relevantes para satisfacer los requerimientos nacionales e internacionales. Como consecuencia del estudio realizado para alcanzar el primer objetivo, la metodología diseñada para estimar la biodiversidad fue adoptada por el Tercer Inventario forestal nacional. Ésta se componía de indicadores agrupados en: cobertura del suelo, composición de árboles y especies de arbustos, riqueza de especies herbáceas y helechos, especies amenazadas, estructura, madera muerta, y líquenes epífitos. Tras el análisis del diseño metodológico y de los datos proporcionados, se observó la conveniencia de modificarla con el fin de optimizar los costes, viabilidad, calidad y cantidad de los datos registrados. En consecuencia, en el Cuarto Inventario Forestal Nacional se aplica una metodología modificada, puesto que se eliminó el muestreo de especies herbáceas y helechos, de líquenes epífitos y de especies amenazadas, se modificaron los protocolos de la toma de datos de estructura y madera muerta y se añadió el muestreo de especies invasoras, edad, ramoneo y grado de naturalidad de la masa. En lo que se refiere al segundo objetivo, se ha avanzado en la armonización de tres grupos de variables considerados como relevantes en el marco de los IFN: los indicadores de vegetación no arbórea (que juegan un papel relevante en los ecosistemas, es donde existe la mayor diversidad de plantas y hasta ahora no se conocían los datos muestreados en los IFN), la determinación de los árboles añosos (que tienen un importante papel como nicho ecológico y su identificación es especialmente relevante para la evaluación de la biodiversidad forestal) y el bosque disponible para el suministro de madera (indicador básico de los requerimientos internacionales de información forestal). Se llevó a cabo un estudio completo de la posible armonización de los indicadores de la vegetación no arbórea en los IFN. Para ello, se identificaron y analizaron las diferentes definiciones y diseños de muestreo empleados por los IFN, se establecieron definiciones de referencia y se propusieron y analizaron dos indicadores que pudiesen ser armonizados: MSC (mean species cover) que corresponde a la media de la fracción de cabida cubierta de cada especie por tipo de bosque y MTC (mean total cover). Se estableció una nueva metodología que permite identificar los árboles añosos con los datos proporcionados por los inventarios forestales nacionales con el objetivo de proporcionar una herramienta eficaz para facilitar la gestión forestal considerando la diversidad de los sistemas forestales. Se analizó el concepto de "bosque disponible para el suministro de madera" (FAWS) estudiando la consistencia de la información internacional disponible con el fin de armonizar su estimación y de proporcionar recomendaciones para satisfacer los requerimientos europeos. Como resultado, se elaboró una nueva definición de referencia de FAWS (que será adoptada por el proceso paneuropeo) y se analiza el impacto de la adopción de esta nueva definición en siete países europeos. El trabajo realizado en esta tesis, puede facilitar el suministrar y/o armonizar parcial o totalmente casi la mitad de los indicadores de información forestal solicitados por los requerimientos internacionales (47%). De éstos, prácticamente un 85% tienen relación con los datos inventariados empleando la metodología propuesta para la estimación de la biodiversidad forestal, y el resto, con el establecimiento de la definición de bosque disponible para el suministro de madera. No obstante, y pese a que esta tesis supone un avance importante, queda patente que las necesidades de información forestal son cambiantes y es imprescindible continuar el proceso de armonización de los IFN europeos. ABSTRACT Over the last few decades, the objectives on forestry and forest management in Europe have shifted from being primarily focused on wood production to sustainable ecosystem management, which should consider all the goods and services provided by the forest. Therefore, there is a continued need for forest indicators and assessments at EU level to support the development and implementation of a number of European environmental policies and to conduct a proper forest management. To address these questions, intensive monitoring on the status of forests is required. Therefore, the scope of National Forest Inventories (NFIs), (primary source of data for national and large-area assessments), has been broadened to include new variables to meet these increasing information requirements. However, estimates produced by different countries are not easily comparable because of differences in NFI definitions, plot configurations, measured variables, and measurement protocols. As consequence, harmonizing data produced at national level is essential for the production of sound EU forest information. The present thesis has two main aims: (i) to establish a methodology design to assess forest biodiversity in the frame of the Spanish National Forest Inventory taking into account the different national and international initiatives with the intention to produce comparable estimates with other EU countries and (ii) to harmonize relevant indicators for national and international requirements. In consequence of the work done related to the first objective, the established methodology to estimate forest biodiversity was adopted and launched under the Third National Forest Inventory. It was composed of indicators grouped into: cover, woody species composition, richness of herbaceous species and ferns, endangered species, stand structure, dead wood, and epiphytic lichens. This methodology was analyzed considering the provided data, time costs, feasibility, and requirements. Consequently, in the ongoing Fourth National Forest Inventory a modified methodology is applied: sampling of herbaceous species and ferns, epiphytic lichens and endangered species were removed, protocols regarding structure and deadwood were modified, and sampling of invasive species, age, browsing impact and naturalness were added. As regards the second objective, progress has been made in harmonizing three groups of variables considered relevant in the context of IFN: Indicators of non-tree vegetation (which play an important role in forest ecosystems, it is where the highest diversity of plants occur and so far the related sampled data in NFIs were not known), the identification of old-growth trees (which have an important role as ecological niche and its identification is especially relevant for the assessment of forest biodiversity) and the available forest for wood supply (basic indicator of international forestry information requirements). A complete analysis of ground vegetation harmonization possibilities within NFIs frame was carried on by identifying and analyzing the different definitions and sampling techniques used by NFIs, providing reference definitions related to ground vegetation and proposing and analyzing two ground vegetation harmonized indicators: “Mean species cover” (MSC) and “Mean total cover” (MTC) for shrubs by European forest categories. A new methodology based on NFI data was established with the aim to provide an efficient tool for policy makers to estimate the number of old-growth trees and thus to be able to perform the analysis of the effect of forest management on the diversity associated to forest systems. The concept of “forest available for wood supply” (FAWS) was discussed and clarified, analyzing the consistency of the available international information on FAWS in order to provide recommendations for data harmonization at European level regarding National Forest Inventories (NFIs). As a result, a new reference definition of FAWS was provided (which will be adopted in the pan-European process) and the consequences of the use of this new definition in seven European countries are analyzed. The studies carried on in this thesis, can facilitate the supply and/or harmonization partially or fully of almost half of the forest indicators (47%) needed for international requirements. Of these, nearly 85% are related to inventoried data using the proposed methodology for the estimation of forest biodiversity, and the rest, with the establishment of the definition of forest available for wood supply. However, despite this thesis imply an important development, forest information needs are changing and it is imperative to continue the process of harmonization of European NFIs.

Design and implementation of an adaptive dashboard and visualization interface for the dynamic optimization and control of Data Centers

Over the last few years, the Data Center market has increased exponentially and this tendency continues today. As a direct consequence of this trend, the industry is pushing the development and implementation of different new technologies that would improve the energy consumption efficiency of data centers. An adaptive dashboard would allow the user to monitor the most important parameters of a data center in real time. For that reason, monitoring companies work with IoT big data filtering tools and cloud computing systems to handle the amounts of data obtained from the sensors placed in a data center.Analyzing the market trends in this field we can affirm that the study of predictive algorithms has become an essential area for competitive IT companies. Complex algorithms are used to forecast risk situations based on historical data and warn the user in case of danger. Considering that several different users will interact with this dashboard from IT experts or maintenance staff to accounting managers, it is vital to personalize it automatically. Following that line of though, the dashboard should only show relevant metrics to the user in different formats like overlapped maps or representative graphs among others. These maps will show all the information needed in a visual and easy-to-evaluate way. To sum up, this dashboard will allow the user to visualize and control a wide range of variables. Monitoring essential factors such as average temperature, gradients or hotspots as well as energy and power consumption and savings by rack or building would allow the client to understand how his equipment is behaving, helping him to optimize the energy consumption and efficiency of the racks. It also would help him to prevent possible damages in the equipment with predictive high-tech algorithms.