A method for incorporating residual stresses into patient-specific finite element simulations of arteries with an example on AAAs

Through progress in medical imaging, image analysis and finite element (FE) meshing tools it is now possible to extract patient-specific geometries from medical images of abdominal aortic aneurysms(AAAs), and thus to study clinically-relevant problems via FE simulations. Such simulations allow additional insight into human physiology in both healthy and diseased states. Medical imaging is most often performed in vivo, and hence the reconstructed model geometry in the problem of interest will represent the in vivo state, e.g., the AAA at physiological blood pressure. However, classical continuum mechanics and FE methods assume that constitutive models and the corresponding simulations begin from an unloaded, stress-free reference condition.

Computational Methods for Identification of Vibrating Structures

System identification deals with the problem of building mathematical models of dynamical systems based on observed data from the system" [1]. In the context of civil engineering, the system refers to a large scale structure such as a building, bridge, or an offshore structure, and identification mostly involves the determination of modal parameters (the natural frequencies, damping ratios, and mode shapes). This paper presents some modal identification results obtained using a state-of-the-art time domain system identification method (data-driven stochastic subspace algorithms [2]) applied to the output-only data measured in a steel arch bridge. First, a three dimensional finite element model was developed for the numerical analysis of the structure using ANSYS. Modal analysis was carried out and modal parameters were extracted in the frequency range of interest, 0-10 Hz. The results obtained from the finite element modal analysis were used to determine the location of the sensors. After that, ambient vibration tests were conducted during April 23-24, 2009. The response of the structure was measured using eight accelerometers. Two stations of three sensors were formed (triaxial stations). These sensors were held stationary for reference during the test. The two remaining sensors were placed at the different measurement points along the bridge deck, in which only vertical and transversal measurements were conducted (biaxial stations). Point estimate and interval estimate have been carried out in the state space model using these ambient vibration measurements. In the case of parametric models (like state space), the dynamic behaviour of a system is described using mathematical models. Then, mathematical relationships can be established between modal parameters and estimated point parameters (thus, it is common to use experimental modal analysis as a synonym for system identification). Stable modal parameters are found using a stabilization diagram. Furthermore, this paper proposes a method for assessing the precision of estimates of the parameters of state-space models (confidence interval). This approach employs the nonparametric bootstrap procedure [3] and is applied to subspace parameter estimation algorithm. Using bootstrap results, a plot similar to a stabilization diagram is developed. These graphics differentiate system modes from spurious noise modes for a given order system. Additionally, using the modal assurance criterion, the experimental modes obtained have been compared with those evaluated from a finite element analysis. A quite good agreement between numerical and experimental results is observed.

Level II reliability methods for tunnels

In tunnel construction, as in every engineering work, it is usual the decision making, with incomplete data. Nevertheless, consciously or not, the builder weighs the risks (even if this is done subjectively) so that he can offer a cost. The objective of this paper is to recall the existence of a methodology to treat the uncertainties in the data so that it is possible to see their effect on the output of the computational model used and then to estimate the failure probability or the safety margin of a structure. In this scheme it is possible to include the subjective knowledge on the statistical properties of the random variables and, using a numerical model consistent with the degree of complexity appropiate to the problem at hand, to make rationally based decisions. As will be shown with the method it is possible to quantify the relative importance of the random variables and, in addition, it can be used, under certain conditions, to solve the inverse problem. It is then a method very well suited both to the project and to the control phases of tunnel construction.

Distributes award protocol: A cooperation and communication method for robots.

In this Master’s Thesis a new Distributed Award Protocol (DAP) for robot communication and cooperation is presented. Task assignment (contract awarding) is done dynamically with contracts assigned to robots based upon the best bid received. Instead of having a manager and a contractor it is proposed a fully distributed bidding/awarding mechanism without a distinguished master. The best bidding robots are awarded with contract for execution. The contractors make decisions locally. This brings the following benefits: no communication bottleneck, low computational power requirement, increased robustness. DAP can handle multitasking. Tasks can be injected into system during the execution of already allocated tasks. As tasks have priorities, in the next cycle after taking into account actual bid parameters of all robots, tasks can be re-allocated. The aim is to minimize a global cost function which is a compromise between cost of task execution and cost of resources usage. Information about tasks and bid values is spread among robots with the use of a Round Robin Route, which is a novel solution proposed in this work. This method allows also identifying failed robots. Such failed robot is eliminated from the list of awarded robots and its replacement is found so the task is still executed by a team. If the failure of a robot was temporary (e.g. communication noise) and the robot can recover, it can again participate in the next bidding/awarding process. Using a bidding/awarding mechanism allows robots to dynamically relocate among tasks. This is also contributes to system robustness. DAP was evaluated through multiple experiments done in the multi-robot simulation system. Various scenarios were tested to check the idea of the main algorithm. Different failures of robots (communication failures, partial hardware malfunctions) were simulated and observations were made regarding how DAP recovers from them. Also the DAP flexibility to environment changes was watched. The experiments in the simulated environment confirmed the above features of DAP.

Quantifying Reproducibility in Computational Biology: The Case of the Tuberculosis Drugome

How easy is it to reproduce the results found in a typical computational biology paper? Either through experience or intuition the reader will already know that the answer is with difficulty or not at all. In this paper we attempt to quantify this difficulty by reproducing a previously published paper for different classes of users (ranging from users with little expertise to domain experts) and suggest ways in which the situation might be improved. Quantification is achieved by estimating the time required to reproduce each of the steps in the method described in the original paper and make them part of an explicit workflow that reproduces the original results. Reproducing the method took several months of effort, and required using new versions and new software that posed challenges to reconstructing and validating the results. The quantification leads to “reproducibility maps” that reveal that novice researchers would only be able to reproduce a few of the steps in the method, and that only expert researchers with advance knowledge of the domain would be able to reproduce the method in its entirety. The workflow itself is published as an online resource together with supporting software and data. The paper concludes with a brief discussion of the complexities of requiring reproducibility in terms of cost versus benefit, and a desiderata with our observations and guidelines for improving reproducibility. This has implications not only in reproducing the work of others from published papers, but reproducing work from one’s own laboratory.

A guided heuristic approach to the MEG inverse problem.

There is general agreement within the scientific community in considering Biology as the science with more potential to develop in the XXI century. This is due to several reasons, but probably the most important one is the state of development of the rest of experimental and technological sciences. In this context, there are a very rich variety of mathematical tools, physical techniques and computer resources that permit to do biological experiments that were unbelievable only a few years ago. Biology is nowadays taking advantage of all these newly developed technologies, which are been applied to life sciences opening new research fields and helping to give new insights in many biological problems. Consequently, biologists have improved a lot their knowledge in many key areas as human function and human diseases. However there is one human organ that is still barely understood compared with the rest: The human brain. The understanding of the human brain is one of the main challenges of the XXI century. In this regard, it is considered a strategic research field for the European Union and the USA. Thus, there is a big interest in applying new experimental techniques for the study of brain function. Magnetoencephalography (MEG) is one of these novel techniques that are currently applied for mapping the brain activity1. This technique has important advantages compared to the metabolic-based brain imagining techniques like Functional Magneto Resonance Imaging2 (fMRI). The main advantage is that MEG has a higher time resolution than fMRI. Another benefit of MEG is that it is a patient friendly clinical technique. The measure is performed with a wireless set up and the patient is not exposed to any radiation. Although MEG is widely applied in clinical studies, there are still open issues regarding data analysis. The present work deals with the solution of the inverse problem in MEG, which is the most controversial and uncertain part of the analysis process3. This question is addressed using several variations of a new solving algorithm based in a heuristic method. The performance of those methods is analyzed by applying them to several test cases with known solutions and comparing those solutions with the ones provided by our methods.

Diseño de una interfaz de representación gráfica de la base de datos de HRTF

El actual proyecto consiste en la creación de una interfaz gráfica de usuario (GUI) en entorno de MATLAB que realice una representación gráfica de la base de datos de HRTF (Head-Related Transfer Function). La función de transferencia de la cabeza es una herramienta muy útil en el estudio de la capacidad del ser humano para percibir su entorno sonoro, además de la habilidad de éste en la localización de fuentes sonoras en el espacio que le rodea. La HRTF biaural (terminología para referirse al conjunto de HRTF del oído izquierdo y del oído derecho) en sí misma, posee información de especial interés ya que las diferencias entre las HRTF de cada oído, conceden la información que nuestro sistema de audición utiliza en la percepción del campo sonoro. Por ello, la funcionalidad de la interfaz gráfica creada presenta gran provecho dentro del estudio de este campo. Las diferencias interaurales se caracterizan en amplitud y en tiempo, variando en función de la frecuencia. Mediante la transformada inversa de Fourier de la señal HRTF, se obtiene la repuesta al impulso de la cabeza, es decir, la HRIR (Head-Related Impulse Response). La cual, además de tener una gran utilidad en la creación de software o dispositivos de generación de sonido envolvente, se utiliza para obtener las diferencias ITD (Interaural Time Difference) e ILD (Interaural Time Difference), comúnmente denominados “parámetros de localización espacial”. La base de datos de HRTF contiene la información biaural de diferentes puntos de ubicación de la fuente sonora, formando una red de coordenadas esféricas que envuelve la cabeza del sujeto. Dicha red, según las medidas realizadas en la cámara anecoica de la EUITT (Escuela Universitaria de Ingeniería Técnica de Telecomunicación), presenta una precisión en elevación de 10º y en azimut de 5º. Los receptores son dos micrófonos alojados en el maniquí acústico llamado HATS (Hats and Torso Simulator) modelo 4100D de Brüel&Kjaer. Éste posee las características físicas que influyen en la percepción del entorno como son las formas del pabellón auditivo (pinna), de la cabeza, del cuello y del torso humano. Será necesario realizar los cálculos de interpolación para todos aquellos puntos no contenidos en la base de datos HRTF, este proceso es sumamente importante no solo para potenciar la capacidad de la misma sino por su utilidad para la comparación entre otras bases de datos existentes en el estudio de este ámbito. La interfaz gráfica de usuario está concebida para un manejo sencillo, claro y predecible, a la vez que interactivo. Desde el primer boceto del programa se ha tenido clara su filosofía, impuesta por las necesidades de un usuario que busca una herramienta práctica y de manejo intuitivo. Su diseño de una sola ventana reúne tanto los componentes de obtención de datos como los que hacen posible la representación gráfica de las HRTF, las HRIR y los parámetros de localización espacial, ITD e ILD. El usuario podrá ir alternando las representaciones gráficas a la vez que introduce las coordenadas de los puntos que desea visualizar, definidas por phi (elevación) y theta (azimut). Esta faceta de la interfaz es la que le otorga una gran facilidad de acceso y lectura de la información representada en ella. Además, el usuario puede introducir valores incluidos en la base de datos o valores intermedios a estos, de esta manera, se indica a la interfaz la necesidad de realizar la interpolación de los mismos. El método de interpolación escogido es el de la ponderación de la distancia inversa entre puntos. Dependiendo de los valores introducidos por el usuario se realizará una interpolación de dos o cuatro puntos, siendo éstos limítrofes al valor introducido, ya sea de phi o theta. Para añadir versatilidad a la interfaz gráfica de usuario, se ha añadido la opción de generar archivos de salida en forma de imagen de las gráficas representadas, de tal forma que el usuario pueda extraer los datos que le interese para cualquier valor de phi y theta. Se completa el presente proyecto fin de carrera con un trabajo de investigación y estudio comparativo de la función y la aplicación de las bases de datos de HRTF dentro del marco científico y de investigación. Esto ha hecho posible concentrar información relacionada a través de revistas científicas de investigación como la JAES (Journal of the Audio Engineering Society) o la ASA (Acoustical Society of America), además, del IEEE ( Institute of Electrical and Electronics Engineers) o la “Web of knowledge” entre otras. Además de realizar la búsqueda en estas fuentes, se ha optado por vías de información más comunes como Google Académico o el portal de acceso “Ingenio” a los todos los recursos electrónicos contenidos en la base de datos de la universidad. El estudio genera una ampliación en el conocimiento de la labor práctica de las HRTF. La mayoría de los estudios enfocan sus esfuerzos en mejorar la percepción del evento sonoro mediante su simulación en la escucha estéreo o multicanal. A partir de las HRTF, esto es posible mediante el análisis y el cálculo de datos como pueden ser las regresiones, siendo éstas muy útiles en la predicción de una medida basándose en la información de la actual. Otro campo de especial interés es el de la generación de sonido 3D. Mediante la base de datos HRTF es posible la simulación de una señal biaural. Se han diseñado algoritmos que son implementados en dispositivos DSP, de tal manera que por medio de retardos interaurales y de diferencias espectrales es posible llegar a un resultado óptimo de sonido envolvente, sin olvidar la importancia de los efectos de reverberación para conseguir un efecto creíble de sonido envolvente. Debido a la complejidad computacional que esto requiere, gran parte de los estudios coinciden en desarrollar sistemas más eficientes, llegando a objetivos tales como la generación de sonido 3D en tiempo real. ABSTRACT. This project involves the creation of a Graphic User Interface (GUI) in the Matlab environment which creates a graphic representation of the HRTF (Head-Related Transfer Function) database. The head transfer function is a very useful tool in the study of the capacity of human beings to perceive their sound environment, as well as their ability to localise sound sources in the area surrounding them. The binaural HRTF (terminology which refers to the HRTF group of the left and right ear) in itself possesses information of special interest seeing that the differences between the HRTF of each ear admits the information that our system of hearing uses in the perception of each sound field. For this reason, the functionality of the graphic interface created presents great benefits within the study of this field. The interaural differences are characterised in space and in time, varying depending on the frequency. By means of Fourier's transformed inverse of the HRTF signal, the response to the head impulse is obtained, in other words, the HRIR (Head-Related Impulse Response). This, as well as having a great use in the creation of software or surround sound generating devices, is used to obtain ITD differences (Interaural Time Difference) and ILD (Interaural Time Difference), commonly named “spatial localisation parameters”. The HRTF database contains the binaural information of different points of sound source location, forming a network of spherical coordinates which surround the subject's head. This network, according to the measures carried out in the anechoic chamber at the EUITT (School of Telecommunications Engineering) gives a precision in elevation of 10º and in azimuth of 5º. The receivers are two microphones placed on the acoustic mannequin called HATS (Hats and Torso Simulator) Brüel&Kjaer model 4100D. This has the physical characteristics which affect the perception of the surroundings which are the forms of the auricle (pinna), the head, neck and human torso. It will be necessary to make interpolation calculations for all those points which are not contained the HRTF database. This process is extremely important not only to strengthen the database's capacity but also for its usefulness in making comparisons with other databases that exist in the study of this field. The graphic user interface is conceived for a simple, clear and predictable use which is also interactive. Since the first outline of the program, its philosophy has been clear, based on the needs of a user who requires a practical tool with an intuitive use. Its design with only one window unites not only the components which obtain data but also those which make the graphic representation of the HRTFs possible, the hrir and the ITD and ILD spatial location parameters. The user will be able to alternate the graphic representations at the same time as entering the point coordinates that they wish to display, defined by phi (elevation) and theta (azimuth). The facet of the interface is what provides the great ease of access and reading of the information displayed on it. In addition, the user can enter values included in the database or values which are intermediate to these. It is, likewise, indicated to the interface the need to carry out the interpolation of these values. The interpolation method is the deliberation of the inverse distance between points. Depending on the values entered by the user, an interpolation of two or four points will be carried out, with these being adjacent to the entered value, whether that is phi or theta. To add versatility to the graphic user interface, the option of generating output files in the form of an image of the graphics displayed has been added. This is so that the user may extract the information that interests them for any phi and theta value. This final project is completed with a research and comparative study essay on the function and application of HRTF databases within the scientific and research framework. It has been possible to collate related information by means of scientific research magazines such as the JAES (Journal of the Audio Engineering Society), the ASA (Acoustical Society of America) as well as the IEEE (Institute of Electrical and Electronics Engineers) and the “Web of knowledge” amongst others. In addition to carrying out research with these sources, I also opted to use more common sources of information such as Academic Google and the “Ingenio” point of entry to all the electronic resources contained on the university databases. The study generates an expansion in the knowledge of the practical work of the HRTF. The majority of studies focus their efforts on improving the perception of the sound event by means of its simulation in stereo or multichannel listening. With the HRTFs, this is possible by means of analysis and calculation of data as can be the regressions. These are very useful in the prediction of a measure being based on the current information. Another field of special interest is that of the generation of 3D sound. Through HRTF databases it is possible to simulate the binaural signal. Algorithms have been designed which are implemented in DSP devices, in such a way that by means of interaural delays and wavelength differences it is possible to achieve an excellent result of surround sound, without forgetting the importance of the effects of reverberation to achieve a believable effect of surround sound. Due to the computational complexity that this requires, a great many studies agree on the development of more efficient systems which achieve objectives such as the generation of 3D sound in real time.

El problema isostático inverso de Vening Meinesz. Teoría y desarrollo. Aplicación práctica para la determinación de la profundidad de la discontinuidad de Mohorovičić en la Península Ibérica

La discontinuidad de Mohorovičić, más conocida simplemente como “Moho” constituye la superficie de separación entre los materiales rocosos menos densos de la corteza y los materiales rocosos más densos del manto, suponiendo estas capas de densidad constante del orden de 2.67 y 3.27 g/cm3, y es un contorno básico para cualquier estudio geofísico de la corteza terrestre. Los estudios sísmicos y gravimétricos realizados demuestran que la profundidad del Moho es del orden de 30-40 km por debajo de la Península Ibérica y 5-15 km bajo las zonas marinas. Además las distintas técnicas existentes muestran gran correlación en los resultados. Haciendo la suposición de que el campo de gravedad de la Península Ibérica (como le ocurre al 90% de la Tierra) está isostáticamente compensado por la variable profundidad del Moho, suponiendo un contraste de densidad constante entre la corteza y el manto y siguiendo el modelo isostático de Vening Meinesz (1931), se formula el problema isostático inverso para obtener tal profundidad a partir de la anomalía Bouguer de la gravedad calculada gracias a la gravedad observada en la superficie terrestre. La particularidad de este modelo es la compensación isostática regional de la que parte la teoría, que se asemeja a la realidad en mayor medida que otros modelos existentes, como el de Airy-Heiskanen, que ha sido históricamente el más utilizado en trabajos semejantes. Además, su solución está relacionada con el campo de gravedad global para toda la Tierra, por lo que los actuales modelos gravitacionales, la mayoría derivados de observaciones satelitales, deberían ser importantes fuentes de información para nuestra solución. El objetivo de esta tesis es el estudio con detalle de este método, desarrollado por Helmut Moritz en 1990, que desde entonces ha tenido poca evolución y seguidores y que nunca se ha puesto en práctica en la Península Ibérica. Después de tratar su teoría, desarrollo y aspectos computacionales, se está en posición de obtener un modelo digital del Moho para esta zona a fin de poder utilizarse para el estudio de la distribución de masas bajo la superficie terrestre. A partir de los datos del Moho obtenidos por métodos alternativos se hará una comparación. La precisión de ninguno de estos métodos es extremadamente alta (+5 km aproximadamente). No obstante, en aquellas zonas donde exista una discrepancia de datos significaría un área descompensada, con posibles movimientos tectónicos o alto grado de riesgo sísmico, lo que le da a este estudio un valor añadido. ABSTRACT The Mohorovičić discontinuity, simply known as “Moho” constitutes the division between the rocky and less thick materials of the mantle and the heavier ones in the crust, assuming densities of the orders of 2.67 y 3.27 g/cm3 respectively. It is also a basic contour for every geophysical kind of studies about the terrestrial crust. The seismic and previous gravimetric observations done in the study area show that the Moho depth is of the order of 30-40 km beneath the ground and 5-15 km under the ocean basin. Besides, the different techniques show a good correlation in their results. Assuming that the Iberian Peninsula gravity field (as it happens for the 90% of the Earth) is isostatically compensated according to the variable Moho depth, supposing a constant density contrast between crust and mantle, and following the isostatic Vening Meinesz model (1931), the inverse isostatic problem can be formulated from Bouguer gravity anomaly data obtained thanks to the observed gravity at the surface of the Earth. The main difference between this model and other existing ones, such as Airy- Heiskanen’s (pure local compensation and mostly used in these kinds of works) is the approaching to a regional isostatic compensation, much more in accordance with reality. Besides, its solution is related to the global gravity field, and the current gravitational models -mostly satellite derived- should be important data sources in such solution. The aim of this thesis is to study with detail this method, developed by Helmut Moritz in 1990, which hardly ever has it put into practice. Moreover, it has never been used in Iberia. After studying its theory, development and computational aspects, we are able to get a Digital Moho Model of the Iberian Peninsula, in order to study the masses distribution beneath the Earth’s surface. With the depth Moho information obtained from alternative methods, a comparison will be done. Both methods give results with the same order of accuracy, which is not quite high (+ 5 km approximately). Nevertheless, the areas in which a higher difference is observed would mean a disturbance of the compensation, which could show an unbalanced area with possible tectonic movements or potential seismic risk. It will give us an important additive value, which could be used in, at first, non related fields, such as density discrepancies or natural disasters contingency plans.

Core physics and safety analysis of Generation-IV Sodium Fast Reactors using existing and newly developed computational tools

El futuro de la energía nuclear de fisión dependerá, entre otros factores, de la capacidad que las nuevas tecnologías demuestren para solventar los principales retos a largo plazo que se plantean. Los principales retos se pueden resumir en los siguientes aspectos: la capacidad de proporcionar una solución final, segura y fiable a los residuos radiactivos; así como dar solución a la limitación de recursos naturales necesarios para alimentar los reactores nucleares; y por último, una mejora robusta en la seguridad de las centrales que en definitiva evite cualquier daño potencial tanto en la población como en el medio ambiente como consecuencia de cualquier escenario imaginable o más allá de lo imaginable. Siguiendo estas motivaciones, la Generación IV de reactores nucleares surge con el compromiso de proporcionar electricidad de forma sostenible, segura, económica y evitando la proliferación de material fisible. Entre los sistemas conceptuales que se consideran para la Gen IV, los reactores rápidos destacan por su capacidad potencial de transmutar actínidos a la vez que permiten una utilización óptima de los recursos naturales. Entre los refrigerantes que se plantean, el sodio parece una de las soluciones más prometedoras. Como consecuencia, esta tesis surgió dentro del marco del proyecto europeo CP-ESFR con el principal objetivo de evaluar la física de núcleo y seguridad de los reactores rápidos refrigerados por sodio, al tiempo que se desarrollaron herramientas apropiadas para dichos análisis. Efectivamente, en una primera parte de la tesis, se abarca el estudio de la física del núcleo de un reactor rápido representativo, incluyendo el análisis detallado de la capacidad de transmutar actínidos minoritarios. Como resultado de dichos análisis, se publicó un artículo en la revista Annals of Nuclear Energy [96]. Por otra parte, a través de un análisis de un hipotético escenario nuclear español, se evalúo la disponibilidad de recursos naturales necesarios en el caso particular de España para alimentar una flota específica de reactores rápidos, siguiendo varios escenarios de demanda, y teniendo en cuenta la capacidad de reproducción de plutonio que tienen estos sistemas. Como resultado de este trabajo también surgió una publicación en otra revista científica de prestigio internacional como es Energy Conversion and Management [97]. Con objeto de realizar esos y otros análisis, se desarrollaron diversos modelos del núcleo del ESFR siguiendo varias configuraciones, y para diferentes códigos. Por otro lado, con objeto de poder realizar análisis de seguridad de reactores rápidos, son necesarias herramientas multidimensionales de alta fidelidad específicas para reactores rápidos. Dichas herramientas deben integrar fenómenos relacionados con la neutrónica y con la termo-hidráulica, entre otros, mediante una aproximación multi-física. Siguiendo este objetivo, se evalúo el código de difusión neutrónica ANDES para su aplicación a reactores rápidos. ANDES es un código de resolución nodal que se encuentra implementado dentro del sistema COBAYA3 y está basado en el método ACMFD. Por lo tanto, el método ACMFD fue sometido a una revisión en profundidad para evaluar su aptitud para la aplicación a reactores rápidos. Durante ese proceso, se identificaron determinadas limitaciones que se discutirán a lo largo de este trabajo, junto con los desarrollos que se han elaborado e implementado para la resolución de dichas dificultades. Por otra parte, se desarrolló satisfactoriamente el acomplamiento del código neutrónico ANDES con un código termo-hidráulico de subcanales llamado SUBCHANFLOW, desarrollado recientemente en el KIT. Como conclusión de esta parte, todos los desarrollos implementados son evaluados y verificados. En paralelo con esos desarrollos, se calcularon para el núcleo del ESFR las secciones eficaces en multigrupos homogeneizadas a nivel nodal, así como otros parámetros neutrónicos, mediante los códigos ERANOS, primero, y SERPENT, después. Dichos parámetros se utilizaron más adelante para realizar cálculos estacionarios con ANDES. Además, como consecuencia de la contribución de la UPM al paquete de seguridad del proyecto CP-ESFR, se calcularon mediante el código SERPENT los parámetros de cinética puntual que se necesitan introducir en los típicos códigos termo-hidráulicos de planta, para estudios de seguridad. En concreto, dichos parámetros sirvieron para el análisis del impacto que tienen los actínidos minoritarios en el comportamiento de transitorios. Concluyendo, la tesis presenta una aproximación sistemática y multidisciplinar aplicada al análisis de seguridad y comportamiento neutrónico de los reactores rápidos de sodio de la Gen-IV, usando herramientas de cálculo existentes y recién desarrolladas ad' hoc para tal aplicación. Se ha empleado una cantidad importante de tiempo en identificar limitaciones de los métodos nodales analíticos en su aplicación en multigrupos a reactores rápidos, y se proponen interesantes soluciones para abordarlas. ABSTRACT The future of nuclear reactors will depend, among other aspects, on the capability to solve the long-term challenges linked to this technology. These are the capability to provide a definite, safe and reliable solution to the nuclear wastes; the limitation of natural resources, needed to fuel the reactors; and last but not least, the improved safety, which would avoid any potential damage on the public and or environment as a consequence of any imaginable and beyond imaginable circumstance. Following these motivations, the IV Generation of nuclear reactors arises, with the aim to provide sustainable, safe, economic and proliferationresistant electricity. Among the systems considered for the Gen IV, fast reactors have a representative role thanks to their potential capacity to transmute actinides together with the optimal usage of natural resources, being the sodium fast reactors the most promising concept. As a consequence, this thesis was born in the framework of the CP-ESFR project with the generic aim of evaluating the core physics and safety of sodium fast reactors, as well as the development of the approppriated tools to perform such analyses. Indeed, in a first part of this thesis work, the main core physics of the representative sodium fast reactor are assessed, including a detailed analysis of the capability to transmute minor actinides. A part of the results obtained have been published in Annals of Nuclear Energy [96]. Moreover, by means of the analysis of a hypothetical Spanish nuclear scenario, the availability of natural resources required to deploy an specific fleet of fast reactor is assessed, taking into account the breeding properties of such systems. This work also led to a publication in Energy Conversion and Management [97]. In order to perform those and other analyses, several models of the ESFR core were created for different codes. On the other hand, in order to perform safety studies of sodium fast reactors, high fidelity multidimensional analysis tools for sodium fast reactors are required. Such tools should integrate neutronic and thermal-hydraulic phenomena in a multi-physics approach. Following this motivation, the neutron diffusion code ANDES is assessed for sodium fast reactor applications. ANDES is the nodal solver implemented inside the multigroup pin-by-pin diffusion COBAYA3 code, and is based on the analytical method ACMFD. Thus, the ACMFD was verified for SFR applications and while doing so, some limitations were encountered, which are discussed through this work. In order to solve those, some new developments are proposed and implemented in ANDES. Moreover, the code was satisfactorily coupled with the thermal-hydraulic code SUBCHANFLOW, recently developed at KIT. Finally, the different implementations are verified. In addition to those developments, the node homogenized multigroup cross sections and other neutron parameters were obtained for the ESFR core using ERANOS and SERPENT codes, and employed afterwards by ANDES to perform steady state calculations. Moreover, as a result of the UPM contribution to the safety package of the CP-ESFR project, the point kinetic parameters required by the typical plant thermal-hydraulic codes were computed for the ESFR core using SERPENT, which final aim was the assessment of the impact of minor actinides in transient behaviour. All in all, the thesis provides a systematic and multi-purpose approach applied to the assessment of safety and performance parameters of Generation-IV SFR, using existing and newly developed analytical tools. An important amount of time was employed in identifying the limitations that the analytical nodal diffusion methods present when applied to fast reactors following a multigroup approach, and interesting solutions are proposed in order to overcome them.

The application of inverse-dispersion and gradient methods to estimate ammonia emissions from a penguin colony.

Penguin colonies represent some of the most concentrated sources of ammonia emissions to the atmosphere in the world. The ammonia emitted into the atmosphere can have a large influence on the nitrogen cycling of ecosystems near the colonies. However, despite the ecological importance of the emissions, no measurements of ammonia emissions from penguin colonies have been made. The objective of this work was to determine the ammonia emission rate of a penguin colony using inverse-dispersion modelling and gradient methods. We measured meteorological variables and mean atmospheric concentrations of ammonia at seven locations near a colony of Adélie penguins in Antarctica to provide input data for inverse-dispersion modelling. Three different atmospheric dispersion models (ADMS, LADD and a Lagrangian stochastic model) were used to provide a robust emission estimate. The Lagrangian stochastic model was applied both in ‘forwards’ and ‘backwards’ mode to compare the difference between the two approaches. In addition, the aerodynamic gradient method was applied using vertical profiles of mean ammonia concentrations measured near the centre of the colony. The emission estimates derived from the simulations of the three dispersion models and the aerodynamic gradient method agreed quite well, giving a mean emission of 1.1 g ammonia per breeding pair per day (95% confidence interval: 0.4–2.5 g ammonia per breeding pair per day). This emission rate represents a volatilisation of 1.9% of the estimated nitrogen excretion of the penguins, which agrees well with that estimated from a temperature-dependent bioenergetics model. We found that, in this study, the Lagrangian stochastic model seemed to give more reliable emission estimates in ‘forwards’ mode than in ‘backwards’ mode due to the assumptions made.

A contribution to appendage drag extrapolation using computational tools

In this paper, the foundations of the beta method, widely used in todays ship appendage extrapolations, are explored. The present work pretends to validate the Beta Method using experimental and computational tools. The ship used is a rounded bow tugboat with two significant appendages, namely, a midship protective structure for the propulsion system and a stern keel. The experimental and computational data was obtained through Towing Tank trials and a RANSE CFD code, respectively.

On-road visual vehicle tracking using Markov chain Monte Carlo with metropolis sampling

In this study, a method for vehicle tracking through video analysis based on Markov chain Monte Carlo (MCMC) particle filtering with metropolis sampling is proposed. The method handles multiple targets with low computational requirements and is, therefore, ideally suited for advanced-driver assistance systems that involve real-time operation. The method exploits the removed perspective domain given by inverse perspective mapping (IPM) to define a fast and efficient likelihood model. Additionally, the method encompasses an interaction model using Markov Random Fields (MRF) that allows treatment of dependencies between the motions of targets. The proposed method is tested in highway sequences and compared to state-of-the-art methods for vehicle tracking, i.e., independent target tracking with Kalman filtering (KF) and joint tracking with particle filtering. The results showed fewer tracking failures using the proposed method.

Some theoretical aspects in computational analysis of adhesive lap joints

This paper is devoted to the numerical analysis of bidimensional bonded lap joints. For this purpose, the stress singularities occurring at the intersections of the adherend-adhesive interfaces with the free edges are first investigated and a method for computing both the order and the intensity factor of these singularities is described briefly. After that, a simplified model, in which the adhesive domain is reduced to a line, is derived by using an asymptotic expansion method. Then, assuming that the assembly debonding is produced by a macro-crack propagation in the adhesive, the associated energy release rate is computed. Finally, a homogenization technique is used in order to take into account a preliminary adhesive damage consisting of periodic micro-cracks. Some numerical results are presented.

An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: Application to AZ31 Mg alloy

An inverse optimization strategy was developed to determine the single crystal properties from experimental results of the mechanical behavior of polycrystals. The polycrystal behavior was obtained by means of the finite element simulation of a representative volume element of the microstructure in which the dominant slip and twinning systems were included in the constitutive equation of each grain. The inverse problem was solved by means of the Levenberg-Marquardt method, which provided an excellent fit to the experimental results. The iterative optimization process followed a hierarchical scheme in which simple representative volume elements were initially used, followed by more realistic ones to reach the final optimum solution, leading to important reductions in computer time. The new strategy was applied to identify the initial and saturation critical resolved shear stresses and the hardening modulus of the active slip systems and extension twinning in a textured AZ31 Mg alloy. The results were in general agreement with the data in the literature but also showed some differences. They were partially explained because of the higher accuracy of the new optimization strategy but it was also shown that the number of independent experimental stress-strain curves used as input is critical to reach an accurate solution to the inverse optimization problem. It was concluded that at least three independent stress-strain curves are necessary to determine the single crystal behavior from polycrystal tests in the case of highly textured Mg alloys.

Microstructure-based numerical modeling of the mechanical behavior of Mg alloys

Dentro de los materiales estructurales, el magnesio y sus aleaciones están siendo el foco de una de profunda investigación. Esta investigación está dirigida a comprender la relación existente entre la microestructura de las aleaciones de Mg y su comportamiento mecánico. El objetivo es optimizar las aleaciones actuales de magnesio a partir de su microestructura y diseñar nuevas aleaciones. Sin embargo, el efecto de los factores microestructurales (como la forma, el tamaño, la orientación de los precipitados y la morfología de los granos) en el comportamiento mecánico de estas aleaciones está todavía por descubrir. Para conocer mejor de la relación entre la microestructura y el comportamiento mecánico, es necesaria la combinación de técnicas avanzadas de caracterización experimental como de simulación numérica, a diferentes longitudes de escala. En lo que respecta a las técnicas de simulación numérica, la homogeneización policristalina es una herramienta muy útil para predecir la respuesta macroscópica a partir de la microestructura de un policristal (caracterizada por el tamaño, la forma y la distribución de orientaciones de los granos) y el comportamiento del monocristal. La descripción de la microestructura se lleva a cabo mediante modernas técnicas de caracterización (difracción de rayos X, difracción de electrones retrodispersados, así como con microscopia óptica y electrónica). Sin embargo, el comportamiento del cristal sigue siendo difícil de medir, especialmente en aleaciones de Mg, donde es muy complicado conocer el valor de los parámetros que controlan el comportamiento mecánico de los diferentes modos de deslizamiento y maclado. En la presente tesis se ha desarrollado una estrategia de homogeneización computacional para predecir el comportamiento de aleaciones de magnesio. El comportamiento de los policristales ha sido obtenido mediante la simulación por elementos finitos de un volumen representativo (RVE) de la microestructura, considerando la distribución real de formas y orientaciones de los granos. El comportamiento del cristal se ha simulado mediante un modelo de plasticidad cristalina que tiene en cuenta los diferentes mecanismos físicos de deformación, como el deslizamiento y el maclado. Finalmente, la obtención de los parámetros que controlan el comportamiento del cristal (tensiones críticas resueltas (CRSS) así como las tasas de endurecimiento para todos los modos de maclado y deslizamiento) se ha resuelto mediante la implementación de una metodología de optimización inversa, una de las principales aportaciones originales de este trabajo. La metodología inversa pretende, por medio del algoritmo de optimización de Levenberg-Marquardt, obtener el conjunto de parámetros que definen el comportamiento del monocristal y que mejor ajustan a un conjunto de ensayos macroscópicos independientes. Además de la implementación de la técnica, se han estudiado tanto la objetividad del metodología como la unicidad de la solución en función de la información experimental. La estrategia de optimización inversa se usó inicialmente para obtener el comportamiento cristalino de la aleación AZ31 de Mg, obtenida por laminado. Esta aleación tiene una marcada textura basal y una gran anisotropía plástica. El comportamiento de cada grano incluyó cuatro mecanismos de deformación diferentes: deslizamiento en los planos basal, prismático, piramidal hc+ai, junto con el maclado en tracción. La validez de los parámetros resultantes se validó mediante la capacidad del modelo policristalino para predecir ensayos macroscópicos independientes en diferentes direcciones. En segundo lugar se estudió mediante la misma estrategia, la influencia del contenido de Neodimio (Nd) en las propiedades de una aleación de Mg-Mn-Nd, obtenida por extrusión. Se encontró que la adición de Nd produce una progresiva isotropización del comportamiento macroscópico. El modelo mostró que este incremento de la isotropía macroscópica era debido tanto a la aleatoriedad de la textura inicial como al incremento de la isotropía del comportamiento del cristal, con valores similares de las CRSSs de los diferentes modos de deformación. Finalmente, el modelo se empleó para analizar el efecto de la temperatura en el comportamiento del cristal de la aleación de Mg-Mn-Nd. La introducción en el modelo de los efectos non-Schmid sobre el modo de deslizamiento piramidal hc+ai permitió capturar el comportamiento mecánico a temperaturas superiores a 150_C. Esta es la primera vez, de acuerdo con el conocimiento del autor, que los efectos non-Schmid han sido observados en una aleación de Magnesio. The study of Magnesium and its alloys is a hot research topic in structural materials. In particular, special attention is being paid in understanding the relationship between microstructure and mechanical behavior in order to optimize the current alloy microstructures and guide the design of new alloys. However, the particular effect of several microstructural factors (precipitate shape, size and orientation, grain morphology distribution, etc.) in the mechanical performance of a Mg alloy is still under study. The combination of advanced characterization techniques and modeling at several length scales is necessary to improve the understanding of the relation microstructure and mechanical behavior. Respect to the simulation techniques, polycrystalline homogenization is a very useful tool to predict the macroscopic response from polycrystalline microstructure (grain size, shape and orientation distributions) and crystal behavior. The microstructure description is fully covered with modern characterization techniques (X-ray diffraction, EBSD, optical and electronic microscopy). However, the mechanical behaviour of single crystals is not well-known, especially in Mg alloys where the correct parameterization of the mechanical behavior of the different slip/twin modes is a very difficult task. A computational homogenization framework for predicting the behavior of Magnesium alloys has been developed in this thesis. The polycrystalline behavior was obtained by means of the finite element simulation of a representative volume element (RVE) of the microstructure including the actual grain shape and orientation distributions. The crystal behavior for the grains was accounted for a crystal plasticity model which took into account the physical deformation mechanisms, e.g. slip and twinning. Finally, the problem of the parametrization of the crystal behavior (critical resolved shear stresses (CRSS) and strain hardening rates of all the slip and twinning modes) was obtained by the development of an inverse optimization methodology, one of the main original contributions of this thesis. The inverse methodology aims at finding, by means of the Levenberg-Marquardt optimization algorithm, the set of parameters defining crystal behavior that best fit a set of independent macroscopic tests. The objectivity of the method and the uniqueness of solution as function of the input information has been numerically studied. The inverse optimization strategy was first used to obtain the crystal behavior of a rolled polycrystalline AZ31 Mg alloy that showed a marked basal texture and a strong plastic anisotropy. Four different deformation mechanisms: basal, prismatic and pyramidal hc+ai slip, together with tensile twinning were included to characterize the single crystal behavior. The validity of the resulting parameters was proved by the ability of the polycrystalline model to predict independent macroscopic tests on different directions. Secondly, the influence of Neodymium (Nd) content on an extruded polycrystalline Mg-Mn-Nd alloy was studied using the same homogenization and optimization framework. The effect of Nd addition was a progressive isotropization of the macroscopic behavior. The model showed that this increase in the macroscopic isotropy was due to a randomization of the initial texture and also to an increase of the crystal behavior isotropy (similar values of the CRSSs of the different modes). Finally, the model was used to analyze the effect of temperature on the crystal behaviour of a Mg-Mn-Nd alloy. The introduction in the model of non-Schmid effects on the pyramidal hc+ai slip allowed to capture the inverse strength differential that appeared, between the tension and compression, above 150_C. This is the first time, to the author's knowledge, that non-Schmid effects have been reported for Mg alloys.