Una Idea Bien Cabe en una Mano. Sobre las maquetas pequeñas como síntesis del espacio arquitectónico = An Idea Fits in the Palm of a Hand

Una Idea Bien Cabe en una Mano. Sobre las maquetas pequeñas como síntesis del espacio arquitectónico = An Idea Fits in the Palm of a Hand

An Idea Fits in The Palm of a Hand

Jewish laws prescribed that when a first-born son was presented in the temple shortly after birth, the offering consisted of two turtle doves or pigeons. And if the family were very poor, a handful of wheat would suffice: the wheat that would fit in the palm of one’s hand. That wonderful Jewish custom, which I learnt about when writing this text, moved me deeply on account of what it shares with my proposal of making models capable of fitting into the palm of one’s hand.

Grasp Mapping Between a 3-Finger Haptic Device and a Robotic Hand

This paper presents the implementation of a robust grasp mapping between a 3-finger haptic device (master) and a robotic hand (slave). Mapping is based on a grasp equivalence defined considering the manipulation capabilities of the master and slave devices. The metrics that translate the human hand gesture to the robotic hand workspace are obtained through an analytical user study. This allows a natural control of the robotic hand. The grasp mapping is accomplished defining 4 control modes that encapsulate all the grasps gestures considered.

Estudio de las propiedades de las fábricas históricas de adobe como soporte a intervenciones de rehabilitación

El extenso legado edificado que constituyen las construcciones históricas de fábrica de adobe distribuidas por toda la península encuentra en la región de Aveiro (Portugal) su máxima expresión, tanto desde el punto de vista cuantitativo, un 30% de los edificios existentes en la región, como tipológico, compuesto por un amplio conjunto de diferentes construcciones (edificios residenciales, edificios militares, iglesias, escuelas, teatros, naves industriales, etc.), muchos de los cuales de reconocido valor histórico, arquitectónico y patrimonial. Tras la gradual desaparición del empleo de la fábrica de adobe como técnica constructiva, durante la segunda mitad del siglo XX, la necesaria conservación y/o rehabilitación de los edificios remanentes no se ha tenido en cuenta. Como consecuencia de esta actitud generalizada de pasividad continuada, se verifica el estado actual de deterioro y de daño acusado que presentan una gran parte de estas construcciones, del cual ha resultado el panorama presente de abandono y ruina en el que se encuentran muchas de ellas. Por regla general, la solución adoptada para afrontar el estado actual de los edificios en estas condiciones suele ser la demolición. No obstante lo anterior, en los últimos años, se viene produciendo en el seno de los diferentes agentes que intervienen en la toma de decisiones sobre estos edificios un interés creciente en su preservación, promoviendo la rehabilitación de los mismos. Empieza de este modo a cobrar importancia la necesidad de desarrollar estrategias de intervención que posibiliten alargar la vida útil de estas estructuras, permitiendo, por un lado, establecer metodologías de análisis de sus condiciones de seguridad, que posibiliten determinar las medidas de actuación necesarias para el aseguramiento de las mismas frente a las acciones existentes y, en su caso, a la incorporación de nuevas solicitaciones debidas a cambios de uso o ampliaciones, así como, dando respuesta a los principales mecanismo de daño a los que se encuentran sujetas. Tratándose de estructuras que fueron construidas utilizando técnicas y materiales escasamente estudiados y entre tanto abandonados, se hace también necesario, y con carácter previo a lo anterior, acometer un estudio e investigación multidisciplinares que permitan su caracterización y comprensión, y la par establecer un diagnóstico sobre los principales agentes y procesos patológicos que promueven el deterioro de las mismas. En este contexto, el estudio llevado a cabo tuvo como objetivos ampliar el conocimiento e investigación acerca de las propiedades y parámetros resistentes de las fábricas históricas de adobe, así como, analizar los principales mecanismos de daño asociados a las mismas, a la luz del el estado actual de estas construcciones, y su repercusión en el comportamiento resistente de las fábricas –con especial énfasis para la influencia del agua–. De este modo, se pretendió construir una base de resultados que, por un lado, pueda servir de soporte a intervenciones de rehabilitación y/o consolidación de estas estructuras – permitiendo de forma ágil y a partir de datos y recursos de cálculo expeditos la evaluación de los niveles de seguridad en las fábricas–, y por otro, el estudio de soluciones de mejora o corrección de deficiencias en su comportamiento estructural. The vast edified legacy composed of the historical adobe load-bearing walls which can be found spread all over the Iberian peninsula has, in the region of Aveiro (Portugal), its maximum expression, both from a quantitative point of view (around 30% of the local construction) and a typological point of view, including a considerable number of different types of constructions (residential buildings, military buildings, churches, industrial buildings, etc.), most of which have a recognized high historical, architectural and patrimonial value. The conservation and/or rehabilitation of many of these edifications has been neglected, since its gradual abandonment as constructive technique during the second half of the 20th century. As a consequence of this posture of general passivity, it is nowadays visible the state of pronounced damage manifested by great part of these constructions, which has been leading to their abandonment and state of ruin. In most cases, the option for demolition has been the solution found to face the actual state of these constructions. However, in recent years, a growing interest in the preservation and maintenance of the adobe constructions has become visible by the envolved parties, with the obvious consequence of rehabilitation. By so, it becomes mandatory to develop strategies of intervention that, through rehabilitation, are able to extend the useful life of the existing structures, allowing on one hand, to establish methodologies to analyze their safety state and determine the actions needed to ensure their protection against existing pressures and, when applicable, the occurrence of new demands due to changes of use or extensions, and on the other hand, to give response to the main damage mechanisms to which these structures are exposed. Because these structures were built using not very well know techniques and materials, which have been, in the meantime, abandoned, it is now crucial that these are object of a previous phase of study and multidisciplinary investigation, essential not only to their characterization and comprehension, but also to the diagnosis of the main pathological processes that affect them. In this context, the present study had as main goal to develop the analysis and knowledge regarding the properties and resistant parameters of the adobe masonry as well as bringing to the light of day the actual state of the existing adobe constructions, making evident the main damage mechanisms by which they are affected and analyzing, through their occurrence, the vulnerability of the mentioned properties and resistant parameters. By so, it was objective of the present study the development of a result database which on one hand, supports the execution of rehabilitation interventions and/or strengthening of these constructions and, on other hand, allows the development of improvement solutions in the mechanical characteristics of the adobe masonry which permit corrections of deficiencies in their structural behavior with a special emphasis on the influence of water. Thus, a database of results was developed. Its goal is, on one hand, to support the rehabilitation or consolidation interventions on these structures - allowing for a quick analysis of the safety state of the adobe walls from expedite data and calculus resources and, on the other hand, to study improvement or correction solutions of their structural behavior.

Arquitectura modal o ensamblaje de repertorios, procesos y disposiciones

En muchas ocasiones se ha establecido una crítica sobre la excesiva disposicionalidad estética del arquitecto: el abuso subjetivista, un innatismo desligado del entorno socioambiental o su desafección hacia las necesidades y los requerimientos pertinentes del usuario final, buscando, principalmente, la objetivación cultural como expresión personal e individualista. Criticas que responden a un malestar persistente, que subyace a la práctica arquitectónica. En otras ocasiones se han ideado y propuesto tentativas o aproximaciones para la corrección y regulación de dicho “exceso”. En busca de la “pretendida objetividad”, éstas han recurrido a un pasado prístino, a una tradición inconsciente, colectiva e impersonal, a la ausencia de autoría, a lo artesanal y a lo vernáculo. También hacia un futuro tecnocrático: al mesianismo basado en la máquina, la ciencia, los métodos y el progreso tecnológico. La búsqueda de un lenguaje compartido, de un diseño sistemático y de una adecuación funcional han establecido nuevos excesos –repertoriales-, relegando la creatividad y la concepción estética a un plano casi inexistente, subordinándolo a variables de diseño externas a la autoría y la expresión subjetiva del diseñador. Esta tensión se ha saldado en una pugna de binomios categoriales que reducen la realidad a un dualismo aporético y contrapuesto, difícilmente superable. El propósito articulatorio de dichas posturas, en modelos ontológicos integrales, permite la incorporación de dichas categorías bajo estructuras y ensamblajes que despliegan los modos de relación, mediación y producción arquitectónicas. Estos ensamblajes combinan los distintos agentes –disposicionalidades- y sus repertorios en cada una de las fases del proceso arquitectónico, construyendo modos de acción y relación en base a los acoplamientos diferenciales, que devienen en técnicas y dinámicas de producción arquitectónica. Cada modo integrará diversas variables en base a los modelos propuestos -estratos, períodos y polos- y a la elección intencional –“situada”- de cada práctica: la Autonomía Modal Arquitectónica. El producto final de cada modo –o ensamblaje- será inconmensurable, estableciendo sistemas y métodos diversos para la práctica estética, sin que por ello esté garantizado el valor o éxito del resultado. ABSTRACT On many occasions an aesthetic criticism of the excessive disposition of the architect´s subjectivist abuse, innate posture detached from socioenvironmental issues or disaffection regarding the needs and requirements of who -or what- will finally use it has been brought up mainly in pursuit of a cultural objectification as a personal expression and an individualistic one. It is a criticism which goes hand in hand with a persistent uneasiness which is interwoven in the architectural practice. On other occasions we have seen ideas, attempts and approaches developed and proposed in order to correct, improve or adjust that so-called “excess”. In the search for this " expected objectivity" theorists have resorted to delving into a pristine past, an unconscious tradition both collective and personal, to the absence of authorship, regarding craft and vernacular. The pursuit of a common language, a systematic design and a functional adequacy has established new excesses -repertoires-, leaving behind creativity and aesthetic conception at an almost nonexistent level and subordinating it to variables outside the authoring design and subjective expression of the designer. This tension has resulted in a conflict between categorical binomial, which reduces reality to an aporetic and opposed dualism which is not easily overcome. The purpose of such articulatory positions in comprehensive ontological modals allows for the incorporation of those categories under structures and assemblies which display and unfold different models of relationship, mediation and production of architecture. These assemblies combine different agents - disposition - and their repertoires in each of the phases of the architectural process, building actions and relational modes based on the differential couplings, which become techniques and dynamics in architectural production. Each mode will integrate several variables within the proposed ontological models - strata, periods and poles - based on an intentional choice –“situated knowledge”- of each practice: Architectural Modal Autonomy. The final product of each mode -or assembly- will be immeasurable, establishing different systems and methods for aesthetic practice without the value or success of the outcome ever being guaranteed.

Human-computer interaction based on visual hand-gesture recognition using volumetric spatiograms of local binary patterns

A more natural, intuitive, user-friendly, and less intrusive Human–Computer interface for controlling an application by executing hand gestures is presented. For this purpose, a robust vision-based hand-gesture recognition system has been developed, and a new database has been created to test it. The system is divided into three stages: detection, tracking, and recognition. The detection stage searches in every frame of a video sequence potential hand poses using a binary Support Vector Machine classifier and Local Binary Patterns as feature vectors. These detections are employed as input of a tracker to generate a spatio-temporal trajectory of hand poses. Finally, the recognition stage segments a spatio-temporal volume of data using the obtained trajectories, and compute a video descriptor called Volumetric Spatiograms of Local Binary Patterns (VS-LBP), which is delivered to a bank of SVM classifiers to perform the gesture recognition. The VS-LBP is a novel video descriptor that constitutes one of the most important contributions of the paper, which is able to provide much richer spatio-temporal information than other existing approaches in the state of the art with a manageable computational cost. Excellent results have been obtained outperforming other approaches of the state of the art.

Development of a hand-gesture recognition system for human-computer interaction

The aim of this Master Thesis is the analysis, design and development of a robust and reliable Human-Computer Interaction interface, based on visual hand-gesture recognition. The implementation of the required functions is oriented to the simulation of a classical hardware interaction device: the mouse, by recognizing a specific hand-gesture vocabulary in color video sequences. For this purpose, a prototype of a hand-gesture recognition system has been designed and implemented, which is composed of three stages: detection, tracking and recognition. This system is based on machine learning methods and pattern recognition techniques, which have been integrated together with other image processing approaches to get a high recognition accuracy and a low computational cost. Regarding pattern recongition techniques, several algorithms and strategies have been designed and implemented, which are applicable to color images and video sequences. The design of these algorithms has the purpose of extracting spatial and spatio-temporal features from static and dynamic hand gestures, in order to identify them in a robust and reliable way. Finally, a visual database containing the necessary vocabulary of gestures for interacting with the computer has been created.