Revision of EBG metamaterials and active antennas

This review of Electromagnetic Band Gap (EGB) metamaterials and steering integrated antennas was carried out in IMST GmbH under a short collaboration stay. This activity is in line with Coordinating the Antenna Research in Europe (CARE). The aim is to identify the newest trends, and suggest novel solutions and design methodologies for various applications.

Inhomogeneous source uniformization using a shell mixer Köhler integrator

High flux and high CRI may be achieved by combining different chips and/or phosphors. This, however, results in inhomogeneous sources that, when combined with collimating optics, typically produce patterns with undesired artifacts. These may be a combination of spatial, angular or color non-uniformities. In order to avoid these effects, there is a need to mix the light source, both spatially and angularly. Diffusers can achieve this effect, but they also increase the etendue (and reduce the brightness) of the resulting source, leading to optical systems of increased size and wider emission angles. The shell mixer is an optic comprised of many lenses on a shell covering the source. These lenses perform Kohler integration to mix the emitted light, both spatially and angularly. Placing it on top of a multi-chip Lambertian light source, the result is a highly homogeneous virtual source (i.e, spatially and angularly mixed), also Lambertian, which is located in the same position with essentially the same size (so the average brightness is not increased). This virtual light source can then be collimated using another optic, resulting in a homogeneous pattern without color separation. Experimental measurements have shown optical efficiency of the shell of 94%, and highly homogeneous angular intensity distribution of collimated beams, in good agreement with the ray-tracing simulations.

Quasi-aplanatic free-form V-groove collimators for LED colour mixing

Two quasi-aplanatic free-form solid V-groove collimators are presented in this work. Both optical designs are originally designed using the Simultaneous Multiple Surface method in three dimensions (SMS 3D). The second optically active surface in both free-form V-groove devices is designed a posteriori as a grooved surface. First two mirror (XX) design is designed in order to clearly show the design procedure and working principle of these devices. Second, RXI free-form design is comparable with existing RXI collimators; it is a compact and highly efficient design made of polycarbonate (PC) performing very good colour mixing of the RGGB LED sources placed off-axis. There have been presented rotationally symmetric non-aplanatic high efficiency collimators with colour mixing property to be improved and rotationally symmetric aplanatic devices with good colour mixing property and efficiency to be improved. The aim of this work was to design a free-form device in order to improve colour mixing property of the rotationally symmetric nonaplanatic RXI devices and the efficiency of the aplanatic ones.

Super resolution using a modified Spherical Geodesic Waveguide suitable for manufacturing

The previous publications (Miñano et al, 2011) have shown that using a Spherical Geodesic Waveguide (SGW), it can be achieved the super-resolution up to ? /500 close to a set of discrete frequencies. These frequencies are directly connected with the well-known Schumann resonance frequencies of spherical symmetric systems. However, the Spherical Geodesic Waveguide (SGW) has been presented as an ideal system, in which the technological obstacles or manufacturing feasibility and their influence on final results were not taken into account. In order to prove the concept of superresolution experimentally, the Spherical Geodesic Waveguide is modified according to the manufacturing requirements and technological limitations. Each manufacturing process imposes some imperfections which can affect the experimental results. Here, we analyze the influence of the manufacturing limitations on the super-resolution properties of the SGW. Beside the theoretical work, herein, there has been presented the experimental results, as well.

Single optical surface imaging designs with unconstrained object to image mapping

In this work, novel imaging designs with a single optical surface (either refractive or reflective) are presented. In some of these designs, both object and image shapes are given but mapping from object to image is obtained as a result of the design. In other designs, not only the mapping is obtained in the design process, but also the shape of the object is found. In the examples considered, the image is virtual and located at infinity and is seen from known pupil, which can emulate a human eye. In the first introductory part, 2D designs have been done using three different design methods: a SMS design, a compound Cartesian oval surface, and a differential equation method for the limit case of small pupil. At the point-size pupil limit, it is proven that these three methods coincide. In the second part, previous 2D designs are extended to 3D by rotation and the astigmatism of the image has been studied. As an advanced variation, the differential equation method is used to provide the freedom to control the tangential rays and sagittal rays simultaneously. As a result, designs without astigmatism (at the small pupil limit) on a curved object surface have been obtained. Finally, this anastigmatic differential equation method has been extended to 3D for the general case, in which freeform surfaces are designed.

Perfect imaging analysis of the spherical geodesic waveguide

Negative Refractive Lens (NRL) has shown that an optical system can produce images with details below the classic Abbe diffraction limit. This optical system transmits the electromagnetic fields, emitted by an object plane, towards an image plane producing the same field distribution in both planes. In particular, a Dirac delta electric field in the object plane is focused without diffraction limit to the Dirac delta electric field in the image plane. Two devices with positive refraction, the Maxwell Fish Eye lens (MFE) and the Spherical Geodesic Waveguide (SGW) have been claimed to break the diffraction limit using positive refraction with a different meaning. In these cases, it has been considered the power transmission from a point source to a point receptor, which falls drastically when the receptor is displaced from the focus by a distance much smaller than the wavelength. Although these systems can detect displacements up to ?/3000, they cannot be compared to the NRL, since the concept of image is different. The SGW deals only with point source and drain, while in the case of the NRL, there is an object and an image surface. Here, it is presented an analysis of the SGW with defined object and image surfaces (both are conical surfaces), similarly as in the case of the NRL. The results show that a Dirac delta electric field on the object surface produces an image below the diffraction limit on the image surface.

Aplanatic thin TIR lens

Aplanatic designs present great interest in the optics field since they are free from spherical aberration and linear coma at the axial direction. Nevertheless nowadays it cannot be found on literature any thin aplanatic design based on a lens. This work presents the first aplanatic thin lens (in this case a dome-shaped faceted TIR lens performing light collimation), designed for LED illumination applications. This device, due to its TIR structure (defined as an anomalous microstructure as we will see) presents good color-mixing properties. We will show this by means of raytrace simulations, as well as high optical efficiency.

VLC oriented energy efficient driver techniques

LEDs are substituting fluorescent and incandescent bulbs as illumination sources due to their low power consumption and long lifetime. Visible Light Communications (VLC) makes use of the LEDs short switching times to transmit information. Although LEDs switching speed is around Mbps range, higher speeds (hundred of Mbps) can be reached by using high bandwidth-efficiency modulation techniques. However, the use of these techniques requires a more complex driver which elevates drastically its power consumption. In this work an energy efficiency analysis of the different VLC modulation techniques and drivers is presented. Besides, the design of new schemes of VLC drivers is described.

Derivación deductiva de programas funcionales con patrones

Una de las dificultades principales en el desarrollo de software es la ausencia de un marco conceptual adecuado para su estudio. Una propuesta la constituye el modelo transformativo, que entiende el desarrollo de software como un proceso iterativo de transformación de especificaciones: se parte de una especificación inicial que va transformándose sucesivamente hasta obtener una especificación final que se toma como programa. Este modelo básico puede llevarse a la práctica de varias maneras. En concreto, la aproximación deductiva toma una sentencia lógica como especificación inicial y su proceso transformador consiste en la demostración de la sentencia; como producto secundario de la demostración se deriva un programa que satisface la especificación inicial. La tesis desarrolla un método deductivo para la derivación de programas funcionales con patrones, escritos en un lenguaje similar a Hope. El método utiliza una lógica multigénero, cuya relación con el lenguaje de programación es estudiada. También se identifican los esquemas de demostración necesarios para la derivación de funciones con patrones, basados en la demostración independiente de varias subsentencias. Cada subsentencia proporciona una subespecificación de una ecuación del futuro programa a derivar. Nuestro método deductivo está inspirado en uno previo de Zohar Manna y Richard Waldinger, conocido como el cuadro deductivo, que deriva programas en un lenguaje similar a Lisp. El nuevo método es una modificación del cuadro de estos autores, que incorpora géneros y permite demostrar una especificación mediante varios cuadros. Cada cuadro demuestra una subespecificación y por tanto deriva una ecuación del programa. Se prevén mecanismos para que los programas derivados puedan contener definiciones locales con patrones y variables anónimas y sinónimas y para que las funciones auxiliares derivadas no usen variables de las funciones principales. La tesis se completa con varios ejemplos de aplicación, un mecanismo que independentiza el método del lenguaje de programación y un prototipo de entorno interactivo de derivación deductiva. Categorías y descriptores de materia CR D.l.l [Técnicas de programación]: Programación funcional; D.2.10 [Ingeniería de software]: Diseño - métodos; F.3.1 [Lógica y significado de los programas]: Especificación, verificación y razonamiento sobre programas - lógica de programas; F.3.3 [Lógica y significado de los programas]: Estudios de construcciones de programas - construcciones funcionales; esquemas de programa y de recursion; 1.2.2 [Inteligencia artificial]: Programación automática - síntesis de programas; 1.2.3 [Inteligencia artificial]: Deducción y demostración de teoremas]: extracción de respuesta/razón; inducción matemática. Términos generales Programación funcional, síntesis de programas, demostración de teoremas. Otras palabras claves y expresiones Funciones con patrones, cuadro deductivo, especificación parcial, inducción estructural, teorema de descomposición.---ABSTRACT---One of the main difficulties in software development is the lack of an adequate conceptual framework of study. The transformational model is one such proposal that conceives software development as an iterative process of specifications transformation: an initial specification is developed and successively transformed until a final specification is obtained and taken as a program. This basic model can be implemented in several ways. The deductive approach takes a logical sentence as the initial specification and its proof constitutes the transformational process; as a byproduct of the proof, a program which satisfies the initial specification is derived. In the thesis, a deductive method for the derivation of Hope-like functional programs with patterns is developed. The method uses a many-sorted logic, whose relation to the programming language is studied. Also the proof schemes necessary for the derivation of functional programs with patterns, based on the independent proof of several subsentences, are identified. Each subsentence provides a subspecification of one equation of the future program to be derived. Our deductive method is inspired on a previous one by Zohar Manna and Richard Waldinger, known as the deductive tableau, which derives Lisp-like programs. The new method incorporates sorts in the tableau and allows to prove a sentence with several tableaux. Each tableau proves a subspecification and therefore derives an equation of the program. Mechanisms are included to allow the derived programs to contain local definitions with patterns and anonymous and synonymous variables; also, the derived auxiliary functions cannot reference parameters of their main functions. The thesis is completed with several application examples, i mechanism to make the method independent from the programming language and an interactive environment prototype for deductive derivation. CR categories and subject descriptors D.l.l [Programming techniques]: Functional programming; D.2.10 [Software engineering]: Design - methodologies; F.3.1 [Logics and meanings of programa]: Specifying and verifying and reasoning about programs - logics of programs; F.3.3 [Logics and meanings of programs]: Studies of program constructs - functional constructs; program and recursion schemes; 1.2.2 [Artificial intelligence]: Automatic programming - program synthesis; 1.2.3 [Artificial intelligence]: Deduction and theorem proving - answer/reason extraction; mathematical induction. General tenas Functional programming, program synthesis, theorem proving. Additional key words and phrases Functions with patterns, deductive tableau, structural induction, partial specification, descomposition theorem.

Validación de un marco abierto accesible de tercera generación para la integración nativa de productos de apoyo en tecnologías de la información y la comunicación

Las personas con discapacidad a menudo se encuentran con problemas de acceso a las Tecnologías de la Información y la Comunicación (TIC), debido a diseños y desarrollos que no tienen en cuenta sus diferencias funcionales, y en consecuencia se encuentran en riesgo de exclusión social. Cada vez es más común encontrar productos de apoyo que permitan utilizar diferentes tecnologías (ordenadores, Internet, dispositivos móviles), pero muchos de ellos no se encuentran integrados debido a que funcionan esencialmente modificando la plataforma donde están instalados, siendo soluciones de acceso de segunda generación. Más allá del desarrollo de los productos de apoyo, que sin duda ha evolucionado positivamente en los últimos años, cabe resaltar que existe una falta de herramientas y de aproximación holística que ayuden a los desarrolladores y diseñadores hacer las TIC accesibles. Esta tesis doctoral pretende validar la hipótesis de que una metodología holística de desarrollo de aplicaciones y productos de apoyo TIC, llamada Marco Abierto Accesible, facilita el desarrollo y la integración de modo nativo de la accesibilidad en las aplicaciones y productos apoyo, independientemente de la tecnología utilizada, dando lugar a soluciones de acceso de tercera generación que permitan mejorar la utilización de dichas aplicaciones por parte de personas con discapacidad. Este trabajo se ha desarrollado en el marco del proyecto AEGIS (del inglés, open Accessibility Everywhere: Groundwork, Infrastructure, Standards), que fue parcialmente financiado por la Comisión Europea (CE) bajo el VII Programa Marco y tuvo una duración de cuatro años. La metodología para el diseño, desarrollo y validación seguida en esta tesis es una adaptación de dos metodologías de diseño existentes (el Diseño Centrado en el Usuario y el Diseño Orientado a Metas), la implementación del Marco Abierto Accesible y el uso de diferentes técnicas de validación. Además se ha desarrollado un marco metodológico de entrenamiento para minimizar el efecto que tiene la curva de aprendizaje cuando los usuarios prueban por primera vez las soluciones desarrolladas. En esta tesis se presenta el Marco Abierto Accesible aplicado a las TIC en las tres áreas en las que se desarrolla este trabajo: ordenadores, Internet y dispositivos móviles, partiendo de las necesidades y problemas que tienen los usuarios con discapacidad en el uso de las TIC. Diferentes instanciaciones del Marco Abierto Accesible se definen en las tres áreas TIC mencionadas anteriormente y se describen varios ejemplos de sus implementaciones particulares. Los resultados de las evaluaciones de las implementaciones particulares con usuarios finales y expertos, una vez discutidos y contrastados con las hipótesis, sirven para probar la validez del Marco Abierto Accesible para la integración nativa de productos de apoyo en Tecnologías de la Información y la Comunicación. Finalmente, se presentan las líneas de investigación y trabajo futuro en el área de la accesibilidad en las TIC. ABSTRACT People with disabilities often encounter problems of access to Information and Communications Technology (ICT), due to design and developments that do not take into account their functional differences and therefore put them at risk of social exclusion. It is increasingly common to find assistive products that allow to use different technologies (computers, Internet, mobile devices), but many of them are not well integrated because they work essentially modifying the platform where they are installed, beeing the second-generation access solutions. Beyond the assistive product development, which has certainly evolved positively in recent years, it is notable that there is a lack of tools and holistic approach to help developers and designers make accessible ICT. This doctoral thesis aims to validate the hypothesis that a holistic approach to application development and assistive ICT products, called Open Accessibility Framework, facilitates the development and integration of native accessible applications and assistive products, regardless of the technology used, resulting in third-generation access solutions that improve the use of such applications by people with disabilities. This work was developed under the AEGIS project (open Accessibility Everywhere: Groundwork, Infrastructure, Standards), which was partially funded by the European Commission (EC) under the Seventh Framework Programme and lasted four years. The methodology for the design, development and validation followed in this thesis is an adaptation of two existing design methodologies (User Centered Design and Goal Oriented Design), the implementation of the Open Accessibility Framework and the usage of different validation techniques. A training methodological framework ha also been developed to minimize the effect of the learning curve when users first try the solutions developed. This thesis presents the Open Accessibility Framework applied to ICT in three areas in which this work is developed: computers, Internet and mobile devices, based on the needs and problems of the disabled users in the use of ICT. Different instantiations of the Open Accessibility Framework are defined in the three aforementioned ICT areas and various examples of its particular implementations are described. The results of the evaluations of the particular implementations which have been carried with end users and experts, once discussed and contrasted with the hypotheses, have been used to test the validity of the Open Accessibility Framework for the native integration of assistive products in Information and Communications Technology. Finally, the future research lines and future work in the area of ICT accessibility are presented.

Active materiality : the agency of matter from the phenomenological perspective = Materialidad activa : la operatividad de la materia desde el punto de vista fenomenológico

The role of matter has remained central to the making and the thinking of architecture, yet many attempts to capture its essence have been trapped in a dialectic tension between form and materiality, between material consistency and immaterial modes of perception, between static states and dynamic processes, between the real and the virtual, thus advancing an increasing awareness of the perplexing complexity of the material world. Within that complexity, the notion of agency – emerging from and within ecological, politico-economic and socio-cultural processes – calls for a reconceptualization of matter, and consequently processes of materialisation, offering a new understanding of context and space, approached as a field of dynamic relationships. In this context, cutting across boundaries between architectural discourse and practice as well as across the vast trans-disciplinary territory, this dissertation aims to illustrate a variety of design methodologies that have derived from the relational approach. More specifically, the intention is to offer new insights into spatial epistemologies embedded within the notion of atmosphere – commonly associated with the so-called New Phenomenology – and to reflect upon its implications for architectural production. In what follows, the intended argumentation has a twofold dimension. First, through a scrutiny of the notion of atmosphere, the aim is to explore ways of thinking and shaping reality through relations, thus acknowledging the aforementioned complexity of the material universe disclosed through human and non-human as well as material and immaterial forces. Secondly, despite the fact that concerns for atmospherics have flourished over the last few decades, the objective is to reveal that the conceptual foundations and procedures for the production of atmosphere might be found beneath the surface of contemporary debates. Hence, in order to unfold and illustrate previously advocated assumptions, an archaeological approach is adopted, tracing a particular projective genealogy, one that builds upon an atmospheric awareness. Accordingly, in tracing such an atmospheric awareness the study explores the notoriously ambiguous nature and the twofold dimension of atmosphere – meteorological and aesthetic – and the heterogeneity of meanings embedded in them. In this context, the notion of atmosphere is presented as parallactic. It transgresses the formal and material boundaries of bodies. It calls for a reevaluation of perceptual experience, opening a new gap that exposes the orthodox space-bodyenvironment relationships to questioning. It offers to architecture an expanded domain in which to manifest itself, defining architectural space as a contingent construction and field of engagement, and presenting matter as a locus of production/performance/action. Consequently, it is such an expanded or relational dimension that constitutes the foundation of what in the context of this study is to be referred to as affective tectonics. Namely, a tectonics that represents processual and experiential multiplicity of convergent time and space, body and environment, the material and the immaterial; a tectonics in which matter neither appears as an inert and passive substance, nor is limited to the traditionally regarded tectonic significance or expressive values, but is presented as an active element charged with inherent potential and vitality. By defining such a relational materialism, the intention is to expand the spectrum of material attributes revealing the intrinsic relationships between the physical properties of materials and their performative, transformative and affective capacities, including effects of interference and haptic dynamics – i.e. protocols of transmission and interaction. The expression that encapsulates its essence is: ACTIVE MATERIALITY RESUMEN El significado de la materia ha estado desde siempre ligado al pensamiento y el quehacer arquitectónico. Sin embargo, muchos intentos de capturar su esencia se han visto sumergidos en una tensión dialéctica entre la forma y la materialidad, entre la consistencia material y los modos inmateriales de la percepción, entre los estados estáticos y los procesos dinámicos, entre lo real y lo virtual, revelando una creciente conciencia de la desconcertante complejidad del mundo material. En esta complejidad, la noción de la operatividad o capacidad agencial– que emerge desde y dentro de los procesos ecológicos, políticos y socio-culturales– requiere de una reconceptualización de la materia y los procesos inherentes a la materialización, ofreciendo una nueva visión del contexto y el espacio, entendidos como un campo relacional dinámico. Oscilando entre el discurso arquitectónico y la práctica arquitectónica, y atravesando un extenso territorio trans-disciplinar, el objetivo de la presente tesis es ilustrar la variedad de metodologías proyectuales que emergieron desde este enfoque relacional. Concretamente, la intención es indagar en las epistemologías espaciales vinculadas a la noción de la atmósfera– generalmente asociada a la llamada Nueva Fenomenología–, reflexionando sobre su impacto en la producción arquitectónica. A continuación, el estudio ofrece una doble línea argumental. Primero, a través del análisis crítico de la noción de atmósfera, el objetivo es explorar maneras de pensar y dar forma a la realidad a través de las relaciones, reconociendo la mencionada complejidad del universo material revelado a través de fuerzas humanas y no-humanas, materiales e inmateriales. Segundo, a pesar de que el interés por las atmósferas ha florecido en las últimas décadas, la intención es demostrar que las bases conceptuales y los protocolos proyectuales de la creación de atmósferas se pueden encontrar bajo la superficie de los debates contemporáneos. Para corroborar e ilustrar estas hipótesis se propone una metodología de carácter arqueológico, trazando una particular genealogía de proyectos– la que se basa en una conciencia atmosférica. Asimismo, al definir esta conciencia atmosférica, el estudio explora tanto la naturaleza notoriamente ambigua y la dimensión dual de la atmósfera– meteorológica y estética–, como la heterogeneidad de significados derivados de ellas. En este contexto, la atmósfera se entiende como un concepto detonante, ya que sobrepasa los limites formales y materiales de los cuerpos, llevando a la re-evaluación de la experiencia perceptiva y abriendo a preguntas la ortodoxa relación espacio- cuerpo-ambiente. En consecuencia, la noción de la atmósfera ofrece a la arquitectura una dimensión expandida donde manifestarse, definiendo el espacio como una construcción contingente, performativa y afectiva, y presentando la materia como locus de producción/ actuación/ acción. Es precisamente esta dimensión expandida relacional la que constituye una base para lo que en el contexto del presente estudio se define como una tectónica afectiva. Es decir, una tectónica que representa una multiplicidad procesual y experiencial derivada de la convergencia entre el tiempo y el espacio, el cuerpo y el entorno, lo material y lo inmaterial; una tectónica en la que la materia no aparece como una substancia pasiva e inerte, ni es limitada al significado considerado tradicionalmente constructivo o a sus valores expresivos, sino que se presenta como elemento activo cargado de un potencial y vitalidad inherentes. A través de la definición de este tipo de materialismo afectivo, la intención es expandir el espectro de los atributos materiales, revelando las relaciones intrínsecas entre las propiedades físicas de los materiales y sus capacidades performativas, transformativas y afectivas, incluyendo efectos de interferencias y dinámicas hápticas– o dicho de otro modo, protocolos de transmisión e interacción. Una expresión que encapsula su esencia vendría a ser: MATERIALIDAD ACTIVA

Analysis and design of multiagent systems using MAS-CommonKADS

This article proposes an agent-oriented methodology called MAS-CommonKADS and develops a case study. This methodology extends the knowledge engineering methodology CommonKADSwith techniquesfrom objectoriented and protocol engineering methodologies. The methodology consists of the development of seven models: Agent Model, that describes the characteristics of each agent; Task Model, that describes the tasks that the agents carry out; Expertise Model, that describes the knowledge needed by the agents to achieve their goals; Organisation Model, that describes the structural relationships between agents (software agents and/or human agents); Coordination Model, that describes the dynamic relationships between software agents; Communication Model, that describes the dynamic relationships between human agents and their respective personal assistant software agents; and Design Model, that refines the previous models and determines the most suitable agent architecture for each agent, and the requirements of the agent network.

Design and Optimization of Power Delivery and Distribution Systems Using Evolutionary Computation Techniques

Nowadays computing platforms consist of a very large number of components that require to be supplied with diferent voltage levels and power requirements. Even a very small platform, like a handheld computer, may contain more than twenty diferent loads and voltage regulators. The power delivery designers of these systems are required to provide, in a very short time, the right power architecture that optimizes the performance, meets electrical specifications plus cost and size targets. The appropriate selection of the architecture and converters directly defines the performance of a given solution. Therefore, the designer needs to be able to evaluate a significant number of options in order to know with good certainty whether the selected solutions meet the size, energy eficiency and cost targets. The design dificulties of selecting the right solution arise due to the wide range of power conversion products provided by diferent manufacturers. These products range from discrete components (to build converters) to complete power conversion modules that employ diferent manufacturing technologies. Consequently, in most cases it is not possible to analyze all the alternatives (combinations of power architectures and converters) that can be built. The designer has to select a limited number of converters in order to simplify the analysis. In this thesis, in order to overcome the mentioned dificulties, a new design methodology for power supply systems is proposed. This methodology integrates evolutionary computation techniques in order to make possible analyzing a large number of possibilities. This exhaustive analysis helps the designer to quickly define a set of feasible solutions and select the best trade-off in performance according to each application. The proposed approach consists of two key steps, one for the automatic generation of architectures and other for the optimized selection of components. In this thesis are detailed the implementation of these two steps. The usefulness of the methodology is corroborated by contrasting the results using real problems and experiments designed to test the limits of the algorithms.

Simulation model for the study of overhead rail current collector systems dynamics, focused on the design of a new conductor rail

Overhead rigid conductor arrangements for current collection for railway traction have some advantages compared to other, more conventional, energy supply systems. They are simple, robust and easily maintained, not to mention their flexibility as to the required height for installation, which makes them particularly suitable for use in subway infrastructures. Nevertheless, due to the increasing speeds of new vehicles running on modern subway lines, a more efficient design is required for this kind of system. In this paper, the authors present a dynamic analysis of overhead conductor rail systems focused on the design of a new conductor profile with a dynamic behaviour superior to that of the system currently in use. This means that either an increase in running speed can be attained, which at present does not exceed 110 km/h, or an increase in the distance between the rigid catenary supports with the ensuing saving in installation costs. This study has been carried out using simulation techniques. The ANSYS programme has been used for the finite element modelling and the SIMPACK programme for the elastic multibody systems analysis.

Design and Test of a High QoS Radio Network for CBTC Systems in Subway Tunnels

Communications Based Train Control Systems require high quality radio data communications for train signaling and control. Actually most of these systems use 2.4GHz band with proprietary radio transceivers and leaky feeder as distribution system. All them demand a high QoS radio network to improve the efficiency of railway networks. We present narrow band, broad band and data correlated measurements taken in Madrid underground with a transmission system at 2.4 GHz in a test network of 2 km length in subway tunnels. The architecture proposed has a strong overlap in between cells to improve reliability and QoS. The radio planning of the network is carefully described and modeled with narrow band and broadband measurements and statistics. The result is a network with 99.7% of packets transmitted correctly and average propagation delay of 20ms. These results fulfill the specifications QoS of CBTC systems.