Modelo para la integración del trazado de infraestructuras lineales en el paisaje y el medio ambiente basado en SIG

El análisis de las diferentes alternativas en la planificación y diseño de corredores y trazados de carreteras debe basarse en la correcta definición de variables territoriales que sirvan como criterios para la toma de decisión y esto requiere un análisis ambiental preliminar de esas variables de calidad. En España, los estudios de viabilidad de nuevas carreteras y autovías están asociados a una fase del proceso de decisión que se corresponde con el denominado Estudio Informativo, el cual establece condicionantes físicos, ambientales, de uso del suelo y culturales que deben ser considerados en las primeras fases de la definición del trazado de un corredor de carretera. Así, la metodología más frecuente es establecer diferentes niveles de capacidad de acogida del territorio en el área de estudio con el fin de resumir las variables territoriales en mapas temáticos y facilitar el proceso de trazado de las alternativas de corredores de carretera. El paisaje es un factor limitante a tener en cuenta en la planificación y diseño de carreteras y, por tanto, deben buscarse trazados más sostenibles en relación con criterios estéticos y ecológicos del mismo. Pero este factor no es frecuentemente analizado en los Estudios Informativos e incluso, si es considerado, los estudios específicos de la calidad del paisaje (estético y ecológico) y de las formas del terreno no incorporan las recomendaciones de las guías de trazado para evitar o reducir los impactos en el paisaje. Además, los mapas de paisaje que se generan en este tipo de estudios no se corresponden con la escala de desarrollo del Estudio Informativo (1:5.000). Otro déficit común en planificación de corredores y trazados de carreteras es que no se tiene en cuenta la conectividad del paisaje durante el proceso de diseño de la carretera para prevenir la afección a los corredores de fauna existentes en el paisaje. Este déficit puede originar un posterior efecto barrera en los movimientos dispersivos de la fauna y la fragmentación de sus hábitats debido a la ocupación parcial o total de las teselas de hábitats con importancia biológica para la fauna (o hábitats focales) y a la interrupción de los corredores de fauna que concentran esos movimientos dispersivos de la fauna entre teselas. El objetivo principal de esta tesis es mejorar el estudio del paisaje para prevenir su afección durante el proceso de trazado de carreteras, facilitar la conservación de los corredores de fauna (o pasillos verdes) y la localización de medidas preventivas y correctoras en términos de selección y cuantificación de factores de idoneidad a fin de reducir los impactos visuales y ecológicos en el paisaje a escala local. Concretamente, la incorporación de valores cuantitativos y bien justificados en el proceso de decisión permite incrementar la transparencia en el proceso de diseño de corredores y trazados de carreteras. Con este fin, se han planteado cuatro preguntas específicas en esta investigación (1) ¿Cómo se seleccionan y evalúan los factores territoriales limitantes para localizar una nueva carretera por los profesionales españoles de planificación del territorio en relación con el paisaje? (2) ¿Cómo pueden ser definidos los corredores de fauna a partir de factores del paisaje que influyen en los movimientos dispersivos de la fauna? (3) ¿Cómo pueden delimitarse y evaluarse los corredores de fauna incluyendo el comportamiento parcialmente errático en los movimientos dispersivos de la fauna y el efecto barrera de los elementos antrópicos a una escala local? (4) ¿Qué y cómo las recomendaciones de diseño de carreteras relacionadas con el paisaje y las formas del terreno pueden ser incluidas en un modelo de Sistemas de Información Geográfica (SIG) para ayudar a los ingenieros civiles durante el proceso de diseño de un trazado de carreteras bajo el punto de vista de la sostenibilidad?. Esta tesis doctoral propone nuevas metodologías que mejoran el análisis visual y ecológico del paisaje utilizando indicadores y modelos SIG para obtener alternativas de trazado que produzcan un menor impacto en el paisaje. Estas metodologías fueron probadas en un paisaje heterogéneo con una alta tasa de densidad de corzo (Capreolus capreolus L.), uno de los grandes mamíferos más atropellados en la red de carreteras españolas, y donde está planificada la construcción de una nueva autovía que atravesará la mitad del área de distribución del corzo. Inicialmente, se han analizado las variables utilizadas en 22 estudios de proyectos de planificación de corredores de carreteras promovidos por el Ministerio de Fomento entre 2006 y 2008. Estas variables se agruparon según condicionantes físicos, ambientales, de usos del suelo y culturales con el fin de comparar los valores asignados de capacidad de acogida del territorio a cada variable en los diferentes estudios revisados. Posteriormente, y como etapa previa de un análisis de conectividad, se construyó un mapa de resistencia de los movimientos dispersivos del corzo en base a la literatura y al juicio de expertos. Usando esta investigación como base, se le asignó un valor de resistencia a cada factor seleccionado para construir la matriz de resistencia, ponderándolo y combinándolo con el resto de factores usando el proceso analítico jerárquico y los operadores de lógica difusa como métodos de análisis multicriterio. Posteriormente, se diseñó una metodología SIG para delimitar claramente la extensión física de los corredores de fauna de acuerdo a un valor umbral de ancho geométrico mínimo, así como la existencia de múltiples potenciales conexiones entre cada par de teselas de hábitats presentes en el paisaje estudiado. Finalmente, se realizó un procesado de datos Light Detection and Ranging (LiDAR) y un modelo SIG para calcular la calidad del paisaje (estético y ecológico), las formas del terreno que presentan características similares para trazar una carretera y la acumulación de vistas de potenciales conductores y observadores de los alrededores de la nueva vía. Las principales contribuciones de esta investigación al conocimiento científico existente en el campo de la evaluación del impacto ambiental en relación al diseño de corredores y trazados de carreteras son cuatro. Primero, el análisis realizado de 22 Estudios Informativos de planificación de carreteras reveló que los métodos aplicados por los profesionales para la evaluación de la capacidad de acogida del territorio no fue suficientemente estandarizada, ya que había una falta de uniformidad en el uso de fuentes cartográficas y en las metodologías de evaluación de la capacidad de acogida del territorio, especialmente en el análisis de la calidad del paisaje estético y ecológico. Segundo, el análisis realizado en esta tesis destaca la importancia de los métodos multicriterio para estructurar, combinar y validar factores que limitan los movimientos dispersivos de la fauna en el análisis de conectividad. Tercero, los modelos SIG desarrollados Generador de alternativas de corredores o Generator of Alternative Corridors (GAC) y Eliminador de Corredores Estrechos o Narrow Corridor Eraser (NCE) pueden ser aplicados sistemáticamente y sobre una base científica en análisis de conectividad como una mejora de las herramientas existentes para la comprensión el paisaje como una red compuesta por nodos y enlaces interconectados. Así, ejecutando los modelos GAC y NCE de forma iterativa, pueden obtenerse corredores alternativos con similar probabilidad de ser utilizados por la fauna y sin que éstos presenten cuellos de botella. Cuarto, el caso de estudio llevado a cabo de prediseño de corredores y trazado de una nueva autovía ha sido novedoso incluyendo una clasificación semisupervisada de las formas del terreno, filtrando una nube de puntos LiDAR e incluyendo la nueva geometría 3D de la carretera en el Modelo Digital de Superficie (MDS). El uso combinado del procesamiento de datos LiDAR y de índices y clasificaciones geomorfológicas puede ayudar a los responsables encargados en la toma de decisiones a evaluar qué alternativas de trazado causan el menor impacto en el paisaje, proporciona una visión global de los juicios de valor más aplicados y, en conclusión, define qué medidas de integración paisajística correctoras deben aplicarse y dónde. ABSTRACT The assessment of different alternatives in road-corridor planning and layout design must be based on a number of well-defined territorial variables that serve as decision-making criteria, and this requires a high-quality preliminary environmental analysis of those quality variables. In Spain, feasibility studies for new roads and motorways are associated to a phase of the decision procedure which corresponds with the one known as the Informative Study, which establishes the physical, environmental, land-use and cultural constraints to be considered in the early stages of defining road corridor layouts. The most common methodology is to establish different levels of Territorial Carrying Capacity (TCC) in the study area in order to summarize the territorial variables on thematic maps and facilitate the tracing process of road-corridor layout alternatives. Landscape is a constraint factor that must be considered in road planning and design, and the most sustainable layouts should be sought based on aesthetic and ecological criteria. However this factor is not often analyzed in Informative Studies and even if it is, baseline studies on landscape quality (aesthetic and ecological) and landforms do not usually include the recommendations of road tracing guides designed to avoid or reduce impacts on the landscape. The resolution of the landscape maps produced in this type of studies does not comply with the recommended road design scale (1:5,000) in the regulations for the Informative Study procedure. Another common shortcoming in road planning is that landscape ecological connectivity is not considered during road design in order to avoid affecting wildlife corridors in the landscape. In the prior road planning stage, this issue could lead to a major barrier effect for fauna dispersal movements and to the fragmentation of their habitat due to the partial or total occupation of habitat patches of biological importance for the fauna (or focal habitats), and the interruption of wildlife corridors that concentrate fauna dispersal movements between patches. The main goal of this dissertation is to improve the study of the landscape and prevent negative effects during the road tracing process, and facilitate the preservation of wildlife corridors (or green ways) and the location of preventive and corrective measures by selecting and quantifying suitability factors to reduce visual and ecological landscape impacts at a local scale. Specifically the incorporation of quantitative and well-supported values in the decision-making process provides increased transparency in the road corridors and layouts design process. Four specific questions were raised in this research: (1) How are territorial constraints selected and evaluated in terms of landscape by Spanish land-planning practitioners before locating a new road? (2) How can wildlife corridors be defined based on the landscape factors influencing the dispersal movements of fauna? (3) How can wildlife corridors be delimited and assessed to include the partially erratic movements of fauna and the barrier effect of the anthropic elements at a local scale? (4) How recommendations of road design related to landscape and landforms can be included in a Geographic Information System (GIS) model to aid civil engineers during the road layout design process and support sustainable development? This doctoral thesis proposes new methodologies that improve the assessment of the visual and ecological landscape character using indicators and GIS models to obtain road layout alternatives with a lower impact on the landscape. These methodologies were tested on a case study of a heterogeneous landscape with a high density of roe deer (Capreolus capreolus L.) –one of the large mammals most commonly hit by vehicles on the Spanish road network– and where a new motorway is planned to pass through the middle of their distribution area. We explored the variables used in 22 road-corridor planning projects sponsored by the Ministry of Public Works between 2006 and 2008. These variables were grouped into physical, environmental, land-use and cultural constraints for the purpose of comparing the TCC values assigned to each variable in the various studies reviewed. As a prior stage in a connectivity analysis, a map of resistance to roe deer dispersal movements was created based on the literature and experts judgment. Using this research as a base, each factor selected to build the matrix was assigned a resistance value and weighted and combined with the rest of the factors using the analytic hierarchy process (AHP) and fuzzy logic operators as multicriteria assessment (MCA) methods. A GIS methodology was designed to clearly delimit the physical area of wildlife corridors according to a geometric threshold width value, and the multiple potential connections between each pair of habitat patches in the landscape. A Digital Surface Model Light Detection and Ranging (LiDAR) dataset processing and a GIS model was performed to determine landscape quality (aesthetic and ecological) and landforms with similar characteristics for the road layout, and the cumulative viewshed of potential drivers and observers in the area surrounding the new motorway. The main contributions of this research to current scientific knowledge in the field of environmental impact assessment for road corridors and layouts design are four. First, the analysis of 22 Informative Studies on road planning revealed that the methods applied by practitioners for assessing the TCC were not sufficiently standardized due to the lack of uniformity in the cartographic information sources and the TCC valuation methodologies, especially in the analysis of the aesthetic and ecological quality of the landscape. Second, the analysis in this dissertation highlights the importance of multicriteria methods to structure, combine and validate factors that constrain wildlife dispersal movements in the connectivity analysis. Third, the “Generator of Alternative Corridors (GAC)” and “Narrow Corridor Eraser (NCE)” GIS models developed can be applied systematically and on a scientific basis in connectivity analyses to improve existing tools and understand landscape as a network composed of interconnected nodes and links. Thus, alternative corridors with similar probability of use by fauna and without bottlenecks can be obtained by iteratively running GAC and NCE models. Fourth, our case study of new motorway corridors and layouts design innovatively included semi-supervised classification of landforms, filtering of LiDAR point clouds and new 3D road geometry on the Digital Surface Model (DSM). The combined used of LiDAR data processing and geomorphological indices and classifications can help decision-makers assess which road layouts produce lower impacts on the landscape, provide an overall insight into the most commonly applied value judgments, and in conclusion, define which corrective measures should be applied in terms of landscaping, and where.

Approach to the use of indicators for the assessment of the environmental level of construction products

The European construction industry is supposed to consume the 40% of the natural European resources and to generate the 40% of the European solid waste. Conscious of the great damage being suffered by the environment because of construction activity, this work tries to provide the building actors with a new tool to improve the current situation. The tool proposed is a model for the comprehensive evaluation of construction products by determining their environmental level. In this research, the environmental level of a construction product has been defined as its quality of accomplishing the construction requirements needed by causing the minimum ecological impact in its surrounding environment. This information allows building actors to choose suitable materials for building needs and also for the environment, mainly in the project stage or on the building site, contributing to improve the relationship between buildings and environment. For the assessment of the environmental level of construction products, five indicators have been identified regarding their global environmental impact through the product life cycle: CO2 emissions provoked during their production, volume and toxicity of waste generated on the building site, durability and recycling capacity after their useful life. Therefore, the less environmental impact one construction product produces, the higher environmental level performs. The model has been tested in 30 construction products that include environmental criteria in their description. The results obtained will be discussed in this article. Furthermore, this model can lay down guidelines for the selection of ecoefficient construction products and the design of new eco-competitive and eco-committed ones

Environmental assessment of low speed policies for motor vehicle mobility in city centres

streets in local residential areas in large cities, real traffic tests for pollutant emissions and fuel consumption have been carried out in Madrid city centre. Emission concentration and car activity were simultaneously measured by a Portable Emissions Measurement System. Real life tests carried out at different times and on different days were performed with a turbo-diesel engine light vehicle equipped with an oxidizer catalyst and using different driving styles with a previously trained driver. The results show that by reducing the speed limit from 50 km h-1 to 30 km h-1, using a normal driving style, the time taken for a given trip does not increase, but fuel consumption and NOx, CO and PM emissions are clearly reduced. Therefore, the main conclusion of this work is that reducing the speed limit in some narrow streets in residential and commercial areas or in a city not only increases pedestrian safety, but also contributes to reducing the environmental impact of motor vehicles and reducing fuel consumption. In addition, there is also a reduction in the greenhouse gas emissions resulting from the combustion of the fuel.

Performance assessment of a kinetically-powered network for herd localization

Developing a herd localization system capable to operate unattended in communication-challenged areas arises from the necessity of improving current systems in terms of cost, autonomy or any other facilities that a certain target group (or overall users) may demand. A network architecture of herd localization is proposed with its corresponding hardware and a methodology to assess performance in different operating conditions. The system is designed taking into account an eventual environmental impact hence most nodes are simple, cheap and kinetically powered from animal movements-neither batteries nor sophisticated processor chips are needed. Other network elements integrating GPS and batteries operate with selectable duty cycles, thus reducing maintenance duties. Equipment has been tested on Scandinavian reindeer in Lapland and its element modeling is integrated into a simulator to analyze such localization network applicability for different use cases. Performance indicators (detection frequency, localization accuracy and delay) are fitted to assess the overall performance; system relative costs are enclosed also for a range of deployments.

Characterization of the environmental performance of the insulating materials in the enveloping of the building.

Insulating materials in buildings are one of the main factors that should be taken into account when talking about sustainability since with a correct application it could imply important savings for the citizens. In the course of its life, a building requires a series of supplies to perform the duties it has been built for, generating an impact on the environment. The selection of one material or another will establish partly the global environmental impact of the building. Choosing the right insulating material will determine the building's general degree of sustainability, both in its heating savings (energy consumption) and in the environmental impacts caused by its LCA (greenhouse gas emissions). Therefore, we propose to establish guidelines to characterize the insulating material with a better environmental performance in all the stages of its life cycle, taking into account the construction system, the use of the building and its location.

Reduced carbon and energy footprint in highway operations: the Highway Energy Assessment (HERA) methodology

Global demand for mobility is increasing and the environmental impact of transport has become an important issue in transportation network planning and decision-making, as well as in the operational management phase. Suitable methods are required to assess emissions and fuel consumption reduction strategies that seek to improve energy efficiency and furthering decarbonization. This study describes the development and application of an improved modeling framework – the HERA (Highway EneRgy Assessment) methodology – that enables to assess the energy and carbon footprint of different highways and traffic flow scenarios and their comparison. HERA incorporates an average speed consumption model adjusted with a correction factor which takes into account the road gradient. It provides a more comprehensive method for estimating the footprint of particular highway segments under specific traffic conditions. It includes the application of the methodology to the Spanish highway network to validate it. Finally, a case study shows the benefits from using this methodology and how to integrate the objective of carbon footprint reductions into highway design, operation and scenario comparison.

Environmental analysis of a Concentrated Solar Power (CSP) plant hybridised with different fossil and renewable fuels

The environmental performance of a 50 MW parabolic trough Concentrated Solar Power (CSP) plant hybridised with different fuels was determined using a Life Cycle Assessment methodology. Six different scenarios were investigated, half of which involved hybridisation with fossil fuels (natural gas, coal and fuel oil), and the other three involved hybridisation with renewable fuels (wheat straw, wood pellets and biogas). Each scenario was compared to a solar-only operation. Nine different environmental categories as well as the Cumulative Energy Demand and the Energy Payback Time (EPT) were evaluated using Simapro software for 1 MWh of electricity produced. The results indicate a worse environmental performance for a CSP plant producing 12% of the electricity from fuel than in a solar-only operation for every indicator, except for the eutrophication and toxicity categories, whose results for the natural gas scenario are slightly better. In the climate change category, the results ranged between 26.9 and 187 kg CO2 eq/MWh, where a solar-only operation had the best results and coal hybridisation had the worst. Considering a weighted single score indicator, the environmental impact of the renewable fuels scenarios is approximately half of those considered in fossil fuels, with the straw scenario showing the best results, and the coal scenario the worstones. EPT for solar-only mode is 1.44 years, while hybridisation scenarios EPT vary in a range of 1.72 -1.83 years for straw and pellets respectively. The fuels with more embodied energy are biomethane and wood pellets.

Comparative Life Cycle Assessment of the Conventional Façade SOS Natura and the Natural Water Tank Façade

The construction industry produces great environmental impacts to the planet. In order to tackle this problem, the European Union has put into effect Regulation No 305/2011, which compels the construction products manufacturers to carry out environmental performance studies of these products and thus make public the impact they cause on the environment. The aim of this research is to make known the environmental impacts of the SOS Natura Conventional Façade (CF) solution, obtained within the research project "SOS Natura, Vegetal Architectural Solutions" developed by the Department of Construction and Technology in Architecture of the School of Architecture of the Technical University of Madrid (Spain). In addition, we report an environmental comparative with the Natural Water Tank Façade (NWTF), studied previously by the same work group and included in the same research project.We present as well an uncertainty analysis for both façades. Following the study conducted we conclude that the NWTF profile has a slightly better environmental behaviour when compared to the CF profile for the entire life cycle in most of the impact categories analysed in this study. However it should also be noted that, in detail and at stage level, the NWTF presents a higher environmental impact than the CF.

Methodology to assess economic and environmental impacts of nitrogen in fertirrigation systems.

To determine the risk of nitrate pollution in agricultural systems have identified several indexes and efficiencies that may lead an effective N fertilizer management for obtain the maximum yield with minimum environmental impact and health

An Intercomparison of Modelling Approaches for Simulating the Atmospheric Dispersion of Ammonia Emitted by Agricultural Sources

RESUMEN La dispersión del amoniaco (NH3) emitido por fuentes agrícolas en medias distancias, y su posterior deposición en el suelo y la vegetación, pueden llevar a la degradación de ecosistemas vulnerables y a la acidificación de los suelos. La deposición de NH3 suele ser mayor junto a la fuente emisora, por lo que los impactos negativos de dichas emisiones son generalmente mayores en esas zonas. Bajo la legislación comunitaria, varios estados miembros emplean modelos de dispersión inversa para estimar los impactos de las emisiones en las proximidades de las zonas naturales de especial conservación. Una revisión reciente de métodos para evaluar impactos de NH3 en distancias medias recomendaba la comparación de diferentes modelos para identificar diferencias importantes entre los métodos empleados por los distintos países de la UE. En base a esta recomendación, esta tesis doctoral compara y evalúa las predicciones de las concentraciones atmosféricas de NH3 de varios modelos bajo condiciones, tanto reales como hipotéticas, que plantean un potencial impacto sobre ecosistemas (incluidos aquellos bajo condiciones de clima Mediterráneo). En este sentido, se procedió además a la comparación y evaluación de varias técnicas de modelización inversa para inferir emisiones de NH3. Finalmente, se ha desarrollado un modelo matemático simple para calcular las concentraciones de NH3 y la velocidad de deposición de NH3 en ecosistemas vulnerables cercanos a una fuente emisora. La comparativa de modelos supuso la evaluación de cuatro modelos de dispersión (ADMS 4.1; AERMOD v07026; OPS-st v3.0.3 y LADD v2010) en un amplio rango de casos hipotéticos (dispersión de NH3 procedente de distintos tipos de fuentes agrícolas de emisión). La menor diferencia entre las concentraciones medias estimadas por los distintos modelos se obtuvo para escenarios simples. La convergencia entre las predicciones de los modelos fue mínima para el escenario relativo a la dispersión de NH3 procedente de un establo ventilado mecánicamente. En este caso, el modelo ADMS predijo concentraciones significativamente menores que los otros modelos. Una explicación de estas diferencias podríamos encontrarla en la interacción de diferentes “penachos” y “capas límite” durante el proceso de parametrización. Los cuatro modelos de dispersión fueron empleados para dos casos reales de dispersión de NH3: una granja de cerdos en Falster (Dinamarca) y otra en Carolina del Norte (EEUU). Las concentraciones medias anuales estimadas por los modelos fueron similares para el caso americano (emisión de granjas ventiladas de forma natural y balsa de purines). La comparación de las predicciones de los modelos con concentraciones medias anuales medidas in situ, así como la aplicación de los criterios establecidos para la aceptación estadística de los modelos, permitió concluir que los cuatro modelos se comportaron aceptablemente para este escenario. No ocurrió lo mismo en el caso danés (nave ventilada mecánicamente), en donde el modelo LADD no dio buenos resultados debido a la ausencia de procesos de “sobreelevacion de penacho” (plume-rise). Los modelos de dispersión dan a menudo pobres resultados en condiciones de baja velocidad de viento debido a que la teoría de dispersión en la que se basan no es aplicable en estas condiciones. En situaciones de frecuente descenso en la velocidad del viento, la actual guía de modelización propone usar un modelo que sea eficaz bajo dichas condiciones, máxime cuando se realice una valoración que tenga como objeto establecer una política de regularización. Esto puede no ser siempre posible debido a datos meteorológicos insuficientes, en cuyo caso la única opción sería utilizar un modelo más común, como la versión avanzada de los modelos Gausianos ADMS o AERMOD. Con el objetivo de evaluar la idoneidad de estos modelos para condiciones de bajas velocidades de viento, ambos modelos fueron utilizados en un caso con condiciones Mediterráneas. Lo que supone sucesivos periodos de baja velocidad del viento. El estudio se centró en la dispersión de NH3 procedente de una granja de cerdos en Segovia (España central). Para ello la concentración de NH3 media mensual fue medida en 21 localizaciones en torno a la granja. Se realizaron también medidas de concentración de alta resolución en una única localización durante una campaña de una semana. En este caso, se evaluaron dos estrategias para mejorar la respuesta del modelo ante bajas velocidades del viento. La primera se basó en “no zero wind” (NZW), que sustituyó periodos de calma con el mínimo límite de velocidad del viento y “accumulated calm emissions” (ACE), que forzaban al modelo a calcular las emisiones totales en un periodo de calma y la siguiente hora de no-calma. Debido a las importantes incertidumbres en los datos de entrada del modelo (inputs) (tasa de emisión de NH3, velocidad de salida de la fuente, parámetros de la capa límite, etc.), se utilizó el mismo caso para evaluar la incertidumbre en la predicción del modelo y valorar como dicha incertidumbre puede ser considerada en evaluaciones del modelo. Un modelo dinámico de emisión, modificado para el caso de clima Mediterráneo, fue empleado para estimar la variabilidad temporal en las emisiones de NH3. Así mismo, se realizó una comparativa utilizando las emisiones dinámicas y la tasa constante de emisión. La incertidumbre predicha asociada a la incertidumbre de los inputs fue de 67-98% del valor medio para el modelo ADMS y entre 53-83% del valor medio para AERMOD. La mayoría de esta incertidumbre se debió a la incertidumbre del ratio de emisión en la fuente (50%), seguida por la de las condiciones meteorológicas (10-20%) y aquella asociada a las velocidades de salida (5-10%). El modelo AERMOD predijo mayores concentraciones que ADMS y existieron más simulaciones que alcanzaron los criterios de aceptabilidad cuando se compararon las predicciones con las concentraciones medias anuales medidas. Sin embargo, las predicciones del modelo ADMS se correlacionaron espacialmente mejor con las mediciones. El uso de valores dinámicos de emisión estimados mejoró el comportamiento de ADMS, haciendo empeorar el de AERMOD. La aplicación de estrategias destinadas a mejorar el comportamiento de este último tuvo efectos contradictorios similares. Con el objeto de comparar distintas técnicas de modelización inversa, varios modelos (ADMS, LADD y WindTrax) fueron empleados para un caso no agrícola, una colonia de pingüinos en la Antártida. Este caso fue empleado para el estudio debido a que suponía la oportunidad de obtener el primer factor de emisión experimental para una colonia de pingüinos antárticos. Además las condiciones eran propicias desde el punto de vista de la casi total ausencia de concentraciones ambiente (background). Tras el trabajo de modelización existió una concordancia suficiente entre las estimaciones obtenidas por los tres modelos. De este modo se pudo definir un factor de emisión de para la colonia de 1.23 g NH3 por pareja criadora por día (con un rango de incertidumbre de 0.8-2.54 g NH3 por pareja criadora por día). Posteriores aplicaciones de técnicas de modelización inversa para casos agrícolas mostraron también un buen compromiso estadístico entre las emisiones estimadas por los distintos modelos. Con todo ello, es posible concluir que la modelización inversa es una técnica robusta para estimar tasas de emisión de NH3. Modelos de selección (screening) permiten obtener una rápida y aproximada estimación de los impactos medioambientales, siendo una herramienta útil para evaluaciones de impactos en tanto que permite eliminar casos que presentan un riesgo potencial de daño bajo. De esta forma, lo recursos del modelo pueden Resumen (Castellano) destinarse a casos en donde la posibilidad de daño es mayor. El modelo de Cálculo Simple de los Límites de Impacto de Amoniaco (SCAIL) se desarrolló para obtener una estimación de la concentración media de NH3 y de la tasa de deposición seca asociadas a una fuente agrícola. Está técnica de selección, basada en el modelo LADD, fue evaluada y calibrada con diferentes bases de datos y, finalmente, validada utilizando medidas independientes de concentraciones realizadas cerca de las fuentes. En general SCAIL dio buenos resultados de acuerdo a los criterios estadísticos establecidos. Este trabajo ha permitido definir situaciones en las que las concentraciones predichas por modelos de dispersión son similares, frente a otras en las que las predicciones difieren notablemente entre modelos. Algunos modelos nos están diseñados para simular determinados escenarios en tanto que no incluyen procesos relevantes o están más allá de los límites de su aplicabilidad. Un ejemplo es el modelo LADD que no es aplicable en fuentes con velocidad de salida significativa debido a que no incluye una parametrización de sobreelevacion del penacho. La evaluación de un esquema simple combinando la sobreelevacion del penacho y una turbulencia aumentada en la fuente mejoró el comportamiento del modelo. Sin embargo más pruebas son necesarias para avanzar en este sentido. Incluso modelos que son aplicables y que incluyen los procesos relevantes no siempre dan similares predicciones. Siendo las razones de esto aún desconocidas. Por ejemplo, AERMOD predice mayores concentraciones que ADMS para dispersión de NH3 procedente de naves de ganado ventiladas mecánicamente. Existe evidencia que sugiere que el modelo ADMS infraestima concentraciones en estas situaciones debido a un elevado límite de velocidad de viento. Por el contrario, existen evidencias de que AERMOD sobreestima concentraciones debido a sobreestimaciones a bajas Resumen (Castellano) velocidades de viento. Sin embrago, una modificación simple del pre-procesador meteorológico parece mejorar notablemente el comportamiento del modelo. Es de gran importancia que estas diferencias entre las predicciones de los modelos sean consideradas en los procesos de evaluación regulada por los organismos competentes. Esto puede ser realizado mediante la aplicación del modelo más útil para cada caso o, mejor aún, mediante modelos múltiples o híbridos. ABSTRACT Short-range atmospheric dispersion of ammonia (NH3) emitted by agricultural sources and its subsequent deposition to soil and vegetation can lead to the degradation of sensitive ecosystems and acidification of the soil. Atmospheric concentrations and dry deposition rates of NH3 are generally highest near the emission source and so environmental impacts to sensitive ecosystems are often largest at these locations. Under European legislation, several member states use short-range atmospheric dispersion models to estimate the impact of ammonia emissions on nearby designated nature conservation sites. A recent review of assessment methods for short-range impacts of NH3 recommended an intercomparison of the different models to identify whether there are notable differences to the assessment approaches used in different European countries. Based on this recommendation, this thesis compares and evaluates the atmospheric concentration predictions of several models used in these impact assessments for various real and hypothetical scenarios, including Mediterranean meteorological conditions. In addition, various inverse dispersion modelling techniques for the estimation of NH3 emissions rates are also compared and evaluated and a simple screening model to calculate the NH3 concentration and dry deposition rate at a sensitive ecosystem located close to an NH3 source was developed. The model intercomparison evaluated four atmospheric dispersion models (ADMS 4.1; AERMOD v07026; OPS-st v3.0.3 and LADD v2010) for a range of hypothetical case studies representing the atmospheric dispersion from several agricultural NH3 source types. The best agreement between the mean annual concentration predictions of the models was found for simple scenarios with area and volume sources. The agreement between the predictions of the models was worst for the scenario representing the dispersion from a mechanically ventilated livestock house, for which ADMS predicted significantly smaller concentrations than the other models. The reason for these differences appears to be due to the interaction of different plume-rise and boundary layer parameterisations. All four dispersion models were applied to two real case studies of dispersion of NH3 from pig farms in Falster (Denmark) and North Carolina (USA). The mean annual concentration predictions of the models were similar for the USA case study (emissions from naturally ventilated pig houses and a slurry lagoon). The comparison of model predictions with mean annual measured concentrations and the application of established statistical model acceptability criteria concluded that all four models performed acceptably for this case study. This was not the case for the Danish case study (mechanically ventilated pig house) for which the LADD model did not perform acceptably due to the lack of plume-rise processes in the model. Regulatory dispersion models often perform poorly in low wind speed conditions due to the model dispersion theory being inapplicable at low wind speeds. For situations with frequent low wind speed periods, current modelling guidance for regulatory assessments is to use a model that can handle these conditions in an acceptable way. This may not always be possible due to insufficient meteorological data and so the only option may be to carry out the assessment using a more common regulatory model, such as the advanced Gaussian models ADMS or AERMOD. In order to assess the suitability of these models for low wind conditions, they were applied to a Mediterranean case study that included many periods of low wind speed. The case study was the dispersion of NH3 emitted by a pig farm in Segovia, Central Spain, for which mean monthly atmospheric NH3 concentration measurements were made at 21 locations surrounding the farm as well as high-temporal-resolution concentration measurements at one location during a one-week campaign. Two strategies to improve the model performance for low wind speed conditions were tested. These were ‘no zero wind’ (NZW), which replaced calm periods with the minimum threshold wind speed of the model and ‘accumulated calm emissions’ (ACE), which forced the model to emit the total emissions during a calm period during the first subsequent non-calm hour. Due to large uncertainties in the model input data (NH3 emission rates, source exit velocities, boundary layer parameters), the case study was also used to assess model prediction uncertainty and assess how this uncertainty can be taken into account in model evaluations. A dynamic emission model modified for the Mediterranean climate was used to estimate the temporal variability in NH3 emission rates and a comparison was made between the simulations using the dynamic emissions and a constant emission rate. Prediction uncertainty due to model input uncertainty was 67-98% of the mean value for ADMS and between 53-83% of the mean value for AERMOD. Most of this uncertainty was due to source emission rate uncertainty (~50%), followed by uncertainty in the meteorological conditions (~10-20%) and uncertainty in exit velocities (~5-10%). AERMOD predicted higher concentrations than ADMS and more of the simulations met the model acceptability criteria when compared with the annual mean measured concentrations. However, the ADMS predictions were better correlated spatially with the measurements. The use of dynamic emission estimates improved the performance of ADMS but worsened the performance of AERMOD and the application of strategies to improved model performance had similar contradictory effects. In order to compare different inverse modelling techniques, several models (ADMS, LADD and WindTrax) were applied to a non-agricultural case study of a penguin colony in Antarctica. This case study was used since it gave the opportunity to provide the first experimentally-derived emission factor for an Antarctic penguin colony and also had the advantage of negligible background concentrations. There was sufficient agreement between the emission estimates obtained from the three models to define an emission factor for the penguin colony (1.23 g NH3 per breeding pair per day with an uncertainty range of 0.8-2.54 g NH3 per breeding pair per day). This emission estimate compared favourably to the value obtained using a simple micrometeorological technique (aerodynamic gradient) of 0.98 g ammonia per breeding pair per day (95% confidence interval: 0.2-2.4 g ammonia per breeding pair per day). Further application of the inverse modelling techniques for a range of agricultural case studies also demonstrated good agreement between the emission estimates. It is concluded, therefore, that inverse dispersion modelling is a robust technique for estimating NH3 emission rates. Screening models that can provide a quick and approximate estimate of environmental impacts are a useful tool for impact assessments because they can be used to filter out cases that potentially have a minimal environmental impact allowing resources to be focussed on more potentially damaging cases. The Simple Calculation of Ammonia Impact Limits (SCAIL) model was developed as a screening model to provide an estimate of the mean NH3 concentration and dry deposition rate downwind of an agricultural source. This screening tool, based on the LADD model, was evaluated and calibrated with several experimental datasets and then validated using independent concentration measurements made near sources. Overall SCAIL performed acceptably according to established statistical criteria. This work has identified situations where the concentration predictions of dispersion models are similar and other situations where the predictions are significantly different. Some models are simply not designed to simulate certain scenarios since they do not include the relevant processes or are beyond the limits of their applicability. An example is the LADD model that is not applicable to sources with significant exit velocity since the model does not include a plume-rise parameterisation. The testing of a simple scheme combining a momentum-driven plume rise and increased turbulence at the source improved model performance, but more testing is required. Even models that are applicable and include the relevant process do not always give similar predictions and the reasons for this need to be investigated. AERMOD for example predicts higher concentrations than ADMS for dispersion from mechanically ventilated livestock housing. There is evidence to suggest that ADMS underestimates concentrations in these situations due to a high wind speed threshold. Conversely, there is also evidence that AERMOD overestimates concentrations in these situations due to overestimation at low wind speeds. However, a simple modification to the meteorological pre-processor appears to improve the performance of the model. It is important that these differences between the predictions of these models are taken into account in regulatory assessments. This can be done by applying the most suitable model for the assessment in question or, better still, using multiple or hybrid models.

Intensive use of aluminium in car body construction

The developments in materials over the last decade have been considerable within the automotive industry, being one of the leaders in innovative product applications. Sustainable product development of an automotive structure requires a balanced approach towards technological, economical and ecological aspects. The introduction of new materials and processes is dependent on satisfying different factors. Competitive and legislative pressures, creating the need for change, affect these factors considerably. The process, direction and speed of change are often reactive. Current paper shows the application of aluminium alloys, for the use in the bottom structure of a car to face the problem for the weight of the entire bottom structure under static load conditions, including stiffness, strength and buckling constraints. In addition to minimized mass and materials' price, the assessment of an environmental impact of materials-candidates during the entire life cycle of the structure is considered.

Nitrogen Fertirrigation: an Integrated Agronomic and Environmental Study

Proper management of the N applied to crops is necessary in order to increase yield, improve water use efficiency (WUE) and reduce the pollutions risks with the least economic, environmental and health costs. A field study with melon crops was conducted during 2005, 2006 and 2007 in central Spain, using 11 different amounts of N. Some environmental indexes have been proposed, to provide an essential tool for determining the groundwater pollution risks associated with common agricultural practices. These indexes are related to variation in the nitrate concentration of drinking water (Impact Index (II)) and groundwater (Environmental Impact Index (EII)). Also, the Management Efficiency (ME) was calculated, which is related to the amount of fruit produced per gram of N leached (Nl). To determine the optimum dose of N, it was also necessary to know the N mineralisation (NM). Our results show that 160 kg ha?1 of available N (Nav) produced the maximum fruit yield (FY), enhanced WUE and gave an NM of 85 kg ha?1, while the impact indexes did not exceed the fixed maximum allowable limits and ME was adequate. The proposed indexes proved to be an effective tool for determining the risk of nitrate contamination and confirmed that the optimum dose of N corresponded to the maximum FY with minimal loss of Nl.

A regional comparison of the effects of climate change on agricultural crops in Europe

The effects of climate change will be felt by most farmers in Europe over the next decades. This study provides consistent results of the impact of climate change on arable agriculture in Europe by using high resolution climate data, socio-economic data, and impact assessment models, including farmer adaptation. All scenarios are consistent with the spatial distribution of effects, exacerbating regional disparities and current vulnerability to climate. Since the results assume no restrictions on the use of water for irrigation or on the application of agrochemicals, they may be considered optimistic from the production point of view and somewhat pessimistic from the environmental point of view. The results provide an estimate of the regional economic impact of climate change, as well as insights into the importance of mitigation and adaptation policies.

Nitrogen fertigation: An integrated agronomic and environmental study

Proper management of the N applied to crops is necessary in order to increase yield, improve water use efficiency (WUE) and reduce the pollutions risks with the least economic, environmental and health costs. A field study with melon crops was conducted during 2005, 2006 and 2007 in central Spain, using 11 different amounts of N. Some environmental indexes have been proposed, to provide an essential tool for determining the groundwater pollution risks associated with common agricultural practices. These indexes are related to variation in the nitrate concentration of drinking water (Impact Index (II)) and groundwater (Environmental Impact Index (EII)). Also, the Management Efficiency (ME) was calculated, which is related to the amount of fruit produced per gram of N leached (Nl). To determine the optimum dose of N, it was also necessary to know the N mineralisation (NM). Our results show that 160 kg ha−1 of available N (Nav) produced the maximum fruit yield (FY), enhanced WUE and gave an NM of 85 kg ha−1, while the impact indexes did not exceed the fixed maximum allowable limits and ME was adequate. The proposed indexes proved to be an effective tool for determining the risk of nitrate contamination and confirmed that the optimum dose of N corresponded to the maximum FY with minimal loss of Nl.

A random utility based multiregional input-output approach to estimate the impact of a new highway on the regional distribution of jobs

This paper addresses the economic impact assessment of the construction of a new road on the regional distribution of jobs. The paper summarizes different existing model approaches considered to assess economic impacts through a literature review. Afterwards, we present the development of a comprehensive approach for analyzing the interaction of new transport infrastructure and the economic impact through an integrated model. This model has been applied to the construction of the motorway A-40 in Spain (497 Km.) which runs across three regions without passing though Madrid City. This may in turn lead to the relocation of labor and capital due to the improvement of accessibility of markets or inputs. The result suggests the existence of direct and indirect effects in other regions derived from the improvement of the transportation infrastructure, and confirms the relevance of road freight transport in some regions. We found that the changes in regional employment are substantial for some regions (increasing or decreasing jobs), but a t the same time negligible in other regions. As a result,the approach provides broad guidance to national governments and other transport-related parties about the impacts of this transport policy.