Biosensing comparison between different geometries based on vertical submicron-structrures made of SU-8 resist

Previous work of the research group [1-4] demonstrated the viability of using periodic lattices of micro and nanopillars, called Bio-photonic sensing Cells (BICELLs), as an optical biosensor vertically characterized by visible spectrometry. Also we have studied theoretically [5] the performance of the BICELLs by 2D and 3D simulation in orde r to optimize the biosensing response. In this work we present the fabrication and biosensing comparison of different geometrical parameters on periodic lattices of pillars in order to discuss theoretical conclusions with these results. In this way, we have explored the biosensing response of other patter ns such as crosses, stars, cylinders, concentrical cylinders (Figure 1). Also we introduced a novel method to test the BICELLs in a cost-effective way by using an ultra-thin film of SU-8 spin-coated onto the patterns to reproduce the effect of a biofilm attached to the biosensor surface. Finally we have tested the biosensing response of the different geometries by the well-known Bovine Serum Albumin (BSA) immunoassay and compared with the theoretical simulation.

Performance profiles of football teams in the UEFA Champions League considering situational efficiency

Performance of football teams varies constantly due to the dynamic nature of this sport, whilst the typical performance and its spread can be represented by profiles combining different performance-related variables based on data from multiple matches. The current study aims to use a profiling technique to evaluate and compare match performance of football teams in the UEFA Champions League incorporating three situational variables (i.e. strength of team and opponent, match outcome and match location). Match statistics of 72 teams, 496 games across four seasons (2008-09 to 2012-13) of this competition were analysed. Sixteen performance-related events were included: shots, shots on target, shots from open play, shots from set piece, shots from counter attack, passes, pass accuracy (%), crosses, through balls, corners, dribbles, possession, aerial success (%), fouls, tackles, and yellow cards. Teams were classified into three levels of strength by a k-cluster analysis. Profiles of overall performance and profiles incorporating three situational variables for teams of all three levels of strength were set up by presenting the mean, standard deviation, median, lower and upper quartiles of the counts of each event to represent their typical performances and spreads. Means were compared by using one-way ANOVA and independent sample t test (for match location, home and away differences), and were plotted into the same radar charts after unifying all the event counts by standardised score. Established profiles can present straightforwardly typical performances of football teams of different levels playing in different situations, which could provide detailed references for coaches and analysts to evaluate performances of upcoming opposition and of their own.

Launching the Vicario Viaduct: Andalucia, Spain

The Vicario Viaduct is located in the A-44 motorway, in the South-East part of Spain. It crosses a natural gorge, near the town of Ízbor in the province of Granada. A single continuous steel concrete composite deck, 24 m wide and 175 m long, divided in two 87,5 m spans, has been built. The cross section is a single structural steel box, 8,00 m wide and 4,52 m deep. The total width of 24 m is reached adding a strut and tie system each 4,375 m on both sides of the box. The steel parts of the deck were entirely constructed in the workshop and then they were erected on site just behind one of the abutments. Finally a 27.5 m long steel nose was connected to launch the deck. The main problems have been the curved shape of the deck (1420 m radius in plan) producing a non symmetric transverse distribution of reactions on each support and the cantilever reaching 87,5 m long, producing a maximum deflection of 1500 mm

Caracterización de poblaciones de vid silvestre de la Península Ibérica

La vid silvestre se considera como el ancestro autóctono de las vides cultivadas y una enorme reserva genética en peligro de extinción. La prospección llevada a cabo entre 2003 y 2004 permitió catalogar 51 localizaciones de vides silvestres españolas, la mayoría de ellas ubicadas en riberas de ríos. Estos ejemplares se incluyeron en el Banco de Germoplasma de la Finca "El Encín" (BGVCAM - Alcalá de Henares, Madrid, España). En primer lugar, se caracterizó la cantidad y la distribución de su diversidad genética utilizando 25 loci empleando microsatélites nucleares (SSR). Hemos analizado también la posible coexistencia en el hábitat natural de vides silvestres con vides cultivadas naturalizadas y portainjertos. De este modo, los análisis fenotípicos y genéticos identificaron el 19% de las muestras recogidas como derivadas de genotipos cultivados, siendo, o bien vides cultivadas naturalizadas o genotipos híbridos derivados de cruces espontáneos entre vides silvestres y cultivadas. La diversidad genética de las poblaciones de vides silvestres fue similar a la observada en el grupo de las cultivadas. El análisis molecular mostró que el germoplasma de cultivadas y silvestres es genéticamente divergente con bajo nivel de introgresión. Se ha identificado cuatro grupos genéticos, con dos de ellos fundamentalmente representados por los genotipos de vides cultivadas y dos por las accesiones silvestres. El análisis de los vínculos genéticos entre las vides silvestres y cultivadas podría sugerir una contribución genética de las accesiones silvestres españolas a las actuales variedades occidentales. En segundo lugar, se realizó un profundo estudio morfológico "ex situ " y se contrastaron con los resultados de la caracterización realizada en 182 variedades comerciales españolas de la misma colección. Todos los individuos silvestres mostraron diferencias morfológicas con Vitis vinifera L subsp. vinifera, pero no se encontraron diferencias significativas dentro Vitis vinifera L. subsp. sylvestris, ni por localización geográfica ni por sexo. Los resultados de este estudio describen las principales características morfológicas de las vides silvestres españolas y sus rasgos diferenciales con su pariente cultivada. Por último, se analizó la composición antociánica presente en 21 accesiones de vides silvestres de la Península Ibérica conservadas en el BGVCAM de la Finca "El Encín" y seleccionadas basándose en diferencias ampelográficas y caracterización molecular. La concentración de antocianinas es similar la encontrad en vides cultivadas con destino a la vinificación. Las accesiones estudiadas mostraron una variabilidad considerable en su perfil antociánico y fue posible distinguir varios grupos. Sin embargo, la presencia de material silvestre con perfiles antociánicos poco comunes o inexistentes en variedades españolas, sugiere que la variabilidad genética relacionada con antocianinas en poblaciones españolas de vides silvestres podría ser más alta que la de variedades cultivadas comúnmente consideradas de origen español. ABSTRACT The wild grapevine is considered an autochthonous relative of cultivated vines and a huge gene pool endangered in Europe. Prospecting carried out between 2003 and 2004 enabled to inventory 51 Spanish sites with wild grapevines, most of them located near rivers. These individuals were grafted in the collection of "El Encín" (BGVCAM - Alcalá de Henares, Madrid, Spain). Firstly, werw characterized the amount and distribution of their genetic diversity using 25 nuclear SSR loci. We have also analysed the possible coexistence in the natural habitat of wild grapevines with naturalized grapevine cultivars and rootstocks. In this way, phenotypic and genetic analyses identified 19% of the collected samples as derived from cultivated genotypes, being either naturalized cultivars or hybrid genotypes derived from spontaneous crosses between wild and cultivated grapevines. The genetic diversity of wild grapevine populations was similar than that observed in the cultivated group. The molecular analysis showed that cultivated germplasm and wild germplasm are genetically divergent with low level of introgression. We identified four genetic groups, with two of them fundamentally represented among cultivated genotypes and two among wild accessions. The analyses of genetic relationships between wild and cultivated grapevines could suggest a genetic contribution of wild accessions from Spain to current Western cultivars. Secondly, a morphological study was done "ex situ" and were compared with data from 182 Spanish commercial cultivars grown in the same collection. All wild individuals showed morphological differences with Vitis vinifera L. ssp. vinifera but no significant differences were found within Vitis vinifera L subsp. sylvestris neither by geographic origin nor by sex. A pattern with the main characteristics of Spanish wild grapevines is suggested. Ultimately, were investigated the anthocyanin composition of 21 mostly Spanish wild grapevine accessions preserved at BGVCAM "El Encín" and selected in consideration of observed ampelographic differences and molecular characterization. Total anthocyanin concentration was similar to that found in winegrape cultivars. The accessions studied showed considerable variability in their anthocyanin fingerprints and it was possible to distinguish several groups, similar to previous reports on the anthocyanin fingerprint of winegrapes. The anthocyanin composition of wild grapevine accessions was similar to that of cultivated grapes. Nevertheless, the presence of wild accessions with anthocyanin fingerprints uncommon or nonexistent in Spanish cultivated varieties suggests that the genetic variability related to anthocyanins in Spanish wild grapevine populations may be higher than that of cultivated varieties commonly considered of Spanish origin.

De la desintegración Espacial a la Conformación regional en la Sabana de Bogotá. Una Propuesta para el desarrollo de la Ciudad Región en el siglo XXI

El presente trabajo de investigación aborda el tema del desarrollo regional en torno a una gran metrópoli como Bogotá y la Sabana de Bogotá. El crecimiento, expansión y relación con los municipios vecinos. Su entorno territorial; es un tema de discusión que cada día adquiere más fuerza desde hace varias décadas. Bogotá y la Sabana de Bogotá, se consideran en la actualidad como un caso representativo del caótico modelo de expansión urbana y crecimiento demográfico, enfrentado al desarrollo urbano como paradigma de la desigualdad de la ciudad latinoamericana. Son muchos los procesos y conflictos de naturaleza Regional y metropolitana que atraviesa la capital colombiana. Sin embargo esta investigación abordada el tema desde la necesidad de gobernanza y coordinación para el desarrollo territorial consensuado y equilibrado de la Región. La sabana de Bogotá está conformada por ciudades dormitorio, ciudades industriales, turísticas, agropecuarias, etc., es atravesada por el Río Bogotá, y en su centro la gran metrópoli, Bogotá D.C. centro de trabajo muy importante a nivel nacional, su área de influencia más próxima llega hasta: Caqueza, Zipaquira, Facatativa, Soacha, Fusagasuga y Girardot. Principales polos de desarrollo en la sabana y el departamento. Cundinamarca está compuesto por 15 provincias y Bogotá. Conformando un sistema de redes urbanas con necesidades comunes y demanda servicios públicos, de transporte, aseo, movilidad, salud, educación, espacio público y calidad ambiental. La metodología de esta investigación consiste en el análisis de la región a partir de la articulación de planes de ordenamiento territorial en un área de estudio propuesta. Mediante entrevistas con profesionales, expertos, funcionarios y empleados públicos y teniendo en cuenta las posibilidades legales en Colombia para el desarrollo territorial regional, establecer la situación real en materia de desarrollo para el departamento de Cundinamarca, evidenciando las necesidades del territorio y su desarrollo de una forma más compleja, valorando las sinergias y necesidades sociales, ambientales y económicas propias del crecimiento urbano, para proponer una serie de directrices que estructuren un desarrollo regional equilibrado en Bogotá y Cundinamarca. El análisis de los modelos del caso contribuye a fortalecer iniciativas para el desarrollo Regional de la Sabana de Bogotá como territorio sostenible: ambiental, económico y socialmente. En un sistema de redes que interconecte a Bogotá, con Cundinamarca, Colombia y el resto del mundo. Cundinamarca como región debe fijar estrategias y articular políticas en función de un modelo de desarrollo urbano regional para el departamento y la Sabana de Bogotá. Directrices departamentales básicas y fundamentales para el desarrollo territorial equilibrado que promueva ciudades sostenibles, compactas y con Calidad de vida para todos sus habitantes. ABSTRACT: This research addresses the issue of regional development around a big metropolis like Bogotá and Sabana de Bogota. The growth, expansion and relations with neighboring municipalities. Your local environment; It is an issue that becomes stronger every day for decades. Bogotá and Sabana de Bogotá, are considered today as a representative case of the chaotic model of urban expansion and population growth, urban development faced as a paradigm of inequality in Latin American city. Many processes and conflicts of Regional and metropolitan nature that crosses the Colombian capital. However this research addressed the issue from the need for governance and coordination for consensual and balanced territorial development of the region. The savannah of Bogota consists of bedroom communities, industrial cities, tourism, agriculture, etc., is crossed by the Bogota River, and at its center the great metropolis, Bogota DC center very important work at the national level, the area closest influence reaches: Caqueza, Zipaquira, Facatativa, Soacha, Fusagasuga and Girardot. Main centers of development in the savannah and the department. Cundinamarca is composed of 15 provinces and Bogota. Forming a system of urban networks with common needs and demand utilities, transportation, grooming, mobility, health, education, public space and environmental quality. The methodology of this research is the analysis of the region from the joint land use plans in the proposed study area. Through interviews with professionals, experts, public officials and employees and taking into account the legal possibilities in Colombia for regional territorial development, establish the real situation in development for the department of Cundinamarca, showing the region's needs and development of a more complex form, assessing synergies and own social, environmental and economic needs of urban growth, to propose a set of guidelines to structure a balanced regional development in Bogota and Cundinamarca. The analysis of case models helps to strengthen initiatives for regional development of the Sabana de Bogota and sustainable region: environmentally, economically and socially. In a network system that interconnects to Bogotá with Cundinamarca, Colombia and elsewhere. Cundinamarca region should set as joint strategies and policies based on a model of regional urban development for the department and the Sabana de Bogota. Basic and fundamental to balanced territorial development that fosters sustainable, compact and quality of life for all its inhabitants cities departmental guidelines.

Reflexión y refracción de la luz en medios anisótropos

En este proyecto se pretende estudiar el comportamiento de la luz al atravesar medios de diversos materiales, tanto isótropos como anisótropos uniáxicos. Para ello se requiere realizar un estudio previo de las condiciones de contorno aplicables a las ecuaciones de Maxwell en la interfase de dos medios que pueden ser isótropos o anisótropos. En el caso de dos materiales isótropos, la solución del problema son los conocidos coeficientes de Fresnel de reflexión y transmisión. En este trabajo se pretende generalizar el estudio al caso del paso de la luz desde un medio isótropo a otro anisótropo uniáxico (con su eje óptico en orientación arbitraria) y viceversa y al caso de dos materiales anisótropos uniáxicos con ejes ópticos en orientaciones arbitrarias. Es de especial interés el caso de un mismo material uniáxico en el que las dos partes tienen el eje óptico con distinta orientación. Una vez planteadas las condiciones de contorno específicas en cada caso, se obtendrá un conjunto de ecuaciones algebraicas cuya resolución permitirá obtener los coeficientes de reflexión y transmisión buscados. Para plantear el sistema de ecuaciones adecuado, será necesario tener una descripción de las características ópticas de los materiales empleados, la orientación de los ejes ópticos en cada caso, y los posibles ángulos de incidencia. Se realizará un tratamiento matricial de modo que el paquete MatLab permite su inversión de manera inmediata. Se desarrollará una interfaz sencilla, realizada con MatLab, que permita al usuario introducir sin dificultad los datos correspondientes a los materiales de los medios incidente y transmitido, la orientación en espacial del o de los ejes ópticos, de la longitud de onda de trabajo y del ángulo de incidencia del haz de luz, con los que la aplicación realizará los cálculos. Los coeficientes de reflexión y refracción obtenidos serán representados gráficamente en función del ángulo de incidencia. Así mismo se representarán los ángulos transmitidos y reflejados en función del de incidencia. Todo ello de esta forma, que resulte sencilla la interpretación de los datos por parte del usuario. ABSTRACT. The reason for this project is to study the behavior of light when light crosses different media of different materials, isotropic materials and uniaxial anisotropic materials. For this, a previous study is necessary where the boundary conditions apply to Maxwell equations at the interface between two media which can be isotropic and anisotropic. If both materials are isotropic, the Fresnel ccoefficients of reflection and refraction are used to solve the problem. The aim of this work is to generalize a study when light crosses from an isotropic media to a uniaxial anisotropic media, where its axis have arbitrary directions, and vicecersa. The system consisting of two materials with axis in arbitrary directions are also being studied. Once the specific boundary conditions are known in each case, a set of algebraic equations are obtained whose solution allows obtaining the reflection coefficients and refraction coefficients. It is necessary to have a description of the optical characteristics of the materials used; of the directions axis in each case and the possible angle of incidence. A matrix is proposed for later treatment in Matlab that allows the immediate inversion. A simple interface will de developed, manufactured with Matlab, that allows the user to enter data easily corresponding to the incident media and transmission media of the different materials, the special axis directions, the wavelength and the angle of incidence of the light beam. This data is used by the application to perform the necessary calculations to solve the problem. When reflection coefficients and refraction coefficients are obtained, the application draws the graphics in function of the angle of incidence. Also transmitted and reflected angles depending on the incidence are represented. This is to perform a data representation which is a simple interpretation of the user data.