Microprocesos láser para la mejora de dispositivos fotovoltaicos basados en silicio cristalino

En los últimos años la tecnología láser se ha convertido en una herramienta imprescindible en la fabricación de dispositivos fotovoltaicos, ayudando a la consecución de dos objetivos claves para que esta opción energética se convierta en una alternativa viable: reducción de costes de fabricación y aumento de eficiencia de dispositivo. Dentro de las tecnologías fotovoltaicas, las basadas en silicio cristalino (c-Si) siguen siendo las dominantes en el mercado, y en la actualidad los esfuerzos científicos en este campo se encaminan fundamentalmente a conseguir células de mayor eficiencia a un menor coste encontrándose, como se comentaba anteriormente, que gran parte de las soluciones pueden venir de la mano de una mayor utilización de tecnología láser en la fabricación de los mismos. En este contexto, esta Tesis hace un estudio completo y desarrolla, hasta su aplicación en dispositivo final, tres procesos láser específicos para la optimización de dispositivos fotovoltaicos de alta eficiencia basados en silicio. Dichos procesos tienen como finalidad la mejora de los contactos frontal y posterior de células fotovoltaicas basadas en c-Si con vistas a mejorar su eficiencia eléctrica y reducir el coste de producción de las mismas. En concreto, para el contacto frontal se han desarrollado soluciones innovadoras basadas en el empleo de tecnología láser en la metalización y en la fabricación de emisores selectivos puntuales basados en técnicas de dopado con láser, mientras que para el contacto posterior se ha trabajado en el desarrollo de procesos de contacto puntual con láser para la mejora de la pasivación del dispositivo. La consecución de dichos objetivos ha llevado aparejado el alcanzar una serie de hitos que se resumen continuación: - Entender el impacto de la interacción del láser con los distintos materiales empleados en el dispositivo y su influencia sobre las prestaciones del mismo, identificando los efectos dañinos e intentar mitigarlos en lo posible. - Desarrollar procesos láser que sean compatibles con los dispositivos que admiten poca afectación térmica en el proceso de fabricación (procesos a baja temperatura), como los dispositivos de heterounión. - Desarrollar de forma concreta procesos, completamente parametrizados, de definición de dopado selectivo con láser, contactos puntuales con láser y metalización mediante técnicas de transferencia de material inducida por láser. - Definir tales procesos de forma que reduzcan la complejidad de la fabricación del dispositivo y que sean de fácil integración en una línea de producción. - Mejorar las técnicas de caracterización empleadas para verificar la calidad de los procesos, para lo que ha sido necesario adaptar específicamente técnicas de caracterización de considerable complejidad. - Demostrar su viabilidad en dispositivo final. Como se detalla en el trabajo, la consecución de estos hitos en el marco de desarrollo de esta Tesis ha permitido contribuir a la fabricación de los primeros dispositivos fotovoltaicos en España que incorporan estos conceptos avanzados y, en el caso de la tecnología de dopado con láser, ha permitido hacer avances completamente novedosos a nivel mundial. Asimismo los conceptos propuestos de metalización con láser abren vías, completamente originales, para la mejora de los dispositivos considerados. Por último decir que este trabajo ha sido posible por una colaboración muy estrecha entre el Centro Láser de la UPM, en el que la autora desarrolla su labor, y el Grupo de Investigación en Micro y Nanotecnologías de la Universidad Politécnica de Cataluña, encargado de la preparación y puesta a punto de las muestras y del desarrollo de algunos procesos láser para comparación. También cabe destacar la contribución de del Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas, CIEMAT, en la preparación de experimentos específicos de gran importancia en el desarrollo del trabajo. Dichas colaboraciones se han desarrollado en el marco de varios proyectos, tales como el proyecto singular estratégico PSE-MICROSIL08 (PSE-iv 120000-2006-6), el proyecto INNDISOL (IPT-420000-2010-6), ambos financiados por el Fondo Europeo de Desarrollo Regional FEDER (UE) “Una manera de hacer Europa” y el MICINN, y el proyecto del Plan Nacional AMIC (ENE2010-21384-C04-02), cuya financiación ha permitido en gran parte llevar a término este trabajo. v ABSTRACT. Last years lasers have become a fundamental tool in the photovoltaic (PV) industry, helping this technology to achieve two major goals: cost reduction and efficiency improvement. Among the present PV technologies, crystalline silicon (c-Si) maintains a clear market supremacy and, in this particular field, the technological efforts are focussing into the improvement of the device efficiency using different approaches (reducing for instance the electrical or optical losses in the device) and the cost reduction in the device fabrication (using less silicon in the final device or implementing more cost effective production steps). In both approaches lasers appear ideally suited tools to achieve the desired success. In this context, this work makes a comprehensive study and develops, until their implementation in a final device, three specific laser processes designed for the optimization of high efficiency PV devices based in c-Si. Those processes are intended to improve the front and back contact of the considered solar cells in order to reduce the production costs and to improve the device efficiency. In particular, to improve the front contact, this work has developed innovative solutions using lasers as fundamental processing tools to metalize, using laser induced forward transfer techniques, and to create local selective emitters by means of laser doping techniques. On the other side, and for the back contact, and approached based in the optimization of standard laser fired contact formation has been envisaged. To achieve these fundamental goals, a number of milestones have been reached in the development of this work, namely: - To understand the basics of the laser-matter interaction physics in the considered processes, in order to preserve the functionality of the irradiated materials. - To develop laser processes fully compatible with low temperature device concepts (as it is the case of heterojunction solar cells). - In particular, to parameterize completely processes of laser doping, laser fired contacts and metallization via laser transfer of material. - To define such a processes in such a way that their final industrial implementation could be a real option. - To improve widely used characterization techniques in order to be applied to the study of these particular processes. - To probe their viability in a final PV device. Finally, the achievement of these milestones has brought as a consequence the fabrication of the first devices in Spain incorporating these concepts. In particular, the developments achieved in laser doping, are relevant not only for the Spanish science but in a general international context, with the introduction of really innovative concepts as local selective emitters. Finally, the advances reached in the laser metallization approached presented in this work open the door to future developments, fully innovative, in the field of PV industrial metallization techniques. This work was made possible by a very close collaboration between the Laser Center of the UPM, in which the author develops his work, and the Research Group of Micro y Nanotecnology of the Universidad Politécnica de Cataluña, in charge of the preparation and development of samples and the assessment of some laser processes for comparison. As well is important to remark the collaboration of the Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas, CIEMAT, in the preparation of specific experiments of great importance in the development of the work. These collaborations have been developed within the framework of various projects such as the PSE-MICROSIL08 (PSE-120000-2006-6), the project INNDISOL (IPT-420000-2010-6), both funded by the Fondo Europeo de Desarrollo Regional FEDER (UE) “Una manera de hacer Europa” and the MICINN, and the project AMIC (ENE2010-21384-C04-02), whose funding has largely allowed to complete this work.

Nuevos dispositivos y criterios de análisis de señales de resonancia magnética para la caracterización humedad/porosidad de suelos y acuíferos superficiales

Un estudio geofísico mediante resonancia se realiza mediante la excitación del agua del subsuelo a partir de la emisión de una intensidad variable a lo largo de un cable extendido sobre la superficie en forma cuadrada o circular. El volumen investigado depende del tamaño de dicho cable, lo cual, junto con la intensidad utilizada para la excitación del agua determina las diferentes profundidades del terreno de las que se va a extraer información, que se encuentran entre 10 y 100 m, habitualmente. La tesis doctoral presentada consiste en la adaptación del Método de Resonancia Magnética para su utilización en aplicaciones superficiales mediante bucles de tamaño reducido. Dicha información sobre el terreno en la escala desde decímetros a pocos metros es interesante en relación a la física de suelos y en general en relación a diferentes problemas de Ingeniería, tanto de extracción de agua como constructiva. Una vez realizada la revisión del estado de conocimiento actual del método en relación a sus aplicaciones usuales, se estudian los problemas inherentes a su adaptación a medidas superficiales. Para solventar dichos problemas se han considerado dos líneas de investigación principales: En primer lugar se realiza un estudio de la influencia de las características del pulso de excitación emitido por el equipo en la calidad de las medidas obtenidas, y las posibles estrategias para mejorar dicho pulso. El pulso de excitación es un parámetro clave en la extracción de información sobre diferentes profundidades del terreno. Por otro lado se busca la optimización del dispositivo de medida para su adaptación al estudio de los primeros metros del suelo mediante el equipo disponible, tratándose éste del equipo NumisLITE de la casa Iris Instruments. ABSTRACT Magnetic Resonance Sounding is a geophysical method performed through the excitation of the subsurface water by a variable electrical intensity delivered through a wire extended on the surface, forming a circle or a square. The investigated volume depends on the wire length and the intensity used, determining the different subsurface depths reached. In the usual application of the method, this depth ranges between 10 and 100 m. This thesis studies the adaptation of the above method to more superficial applications using smaller wire loops. Information about the subsurface in the range of decimeter to a few meters is interesting regarding physics of soils, as well as different Engineering problems, either for water extraction or for construction. After a review of the nowadays state of the art of the method regarding its usual applications, the special issues attached to its use to perform very shallow measures are studied. In order to sort out these problems two main research lines are considered: On the one hand, a study about the influence of the characteristics of the emitted pulse in the resulting measure quality is performed. Possible strategies in order to improve this pulse are investigated, as the excitation pulse is a key parameter to obtain information from different depths of the subsurface. On the other hand, the study tries to optimize the measurement device to its adaptation to the study of the first meters of the ground with the available instrumentation, the NumisLITE equipment from Iris Instruments.

Impacto del vehículo eléctrico sobre las redes de distribución

Es objeto del presente proyecto definir red inteligente (Smart Grid) como parte fundamental de un futuro sistema de generación, distribución y transporte de la energía, utilizando como medio principal de desplazamiento el Vehículo Eléctrico. El desarrollo del proyecto se lleva a cabo a través de un análisis exhaustivo del impacto de la introducción masiva del Vehículo Eléctrico en las redes de distribución. Para evaluar las simulaciones se han creado unos niveles de penetración de vehículos, así como el despliegue de dispositivos de recarga y hora óptima de conexión a la red para que la curva de demanda se suavice lo máximo posible y las infraestructuras eléctricas no sufran una sobrecarga provocando una caída del sistema eléctrico. Con un software específico, se ha obtenido un porcentaje de pérdidas y se han sacado unas conclusiones para los distintos casos de penetración del vehículo eléctrico. Asimismo, se ha analizado la implementación de un sistema que estudie los intercambios energéticos que se producen entre los diferentes sistemas del vehículo, y entre éste y su entorno para poder disminuir las pérdidas. ABSTRACT The objective of this project is to define Smart Grid as an essential part of a future generation system, distribution and transmission of energy, using Electric Vehicle as primary mean of moving. The development of this project was carried out through a comprehensive analysis of the impact of the massive introduction of electric vehicles in distribution networks. To evaluate the simulations, different indicators for vehicle´s penetration were created, as well as the deployment of charging devices and optimal time to get network connection in order to smooth the demand curve as much as possible and to avoid electrical infrastructure being overloaded and thus causing the electrical system to stop working. For each of the different cases of electric vehicles’ penetration a percentage of losses and conclusions were drawn using specific software. The implementation of a system that studies the exchanges of energy that occur between different vehicle systems and between itself and its environment to reduce losses was also analyzed.

Model-Driven Methodology for Rapid Deployment of Smart Spaces based on Resource-Oriented Architectures

Advances in electronics nowadays facilitate the design of smart spaces based on physical mash-ups of sensor and actuator devices. At the same time, software paradigms such as Internet of Things (IoT) and Web of Things (WoT) are motivating the creation of technology to support the development and deployment of web-enabled embedded sensor and actuator devices with two major objectives: (i) to integrate sensing and actuating functionalities into everyday objects, and (ii) to easily allow a diversity of devices to plug into the Internet. Currently, developers who are applying this Internet-oriented approach need to have solid understanding about specific platforms and web technologies. In order to alleviate this development process, this research proposes a Resource-Oriented and Ontology-Driven Development (ROOD) methodology based on the Model Driven Architecture (MDA). This methodology aims at enabling the development of smart spaces through a set of modeling tools and semantic technologies that support the definition of the smart space and the automatic generation of code at hardware level. ROOD feasibility is demonstrated by building an adaptive health monitoring service for a Smart Gym.

Design and modeling of the multi-agent robotic system: SMART

This article presents the design, kinematic model and communication architecture for the multi-agent robotic system called SMART. The philosophy behind this kind of system requires the communication architecture to contemplate the concurrence of the whole system. The proposed architecture combines different communication technologies (TCP/IP and Bluetooth) under one protocol designed for the cooperation among agents and other elements of the system such as IP-Cameras, image processing library, path planner, user Interface, control block and data block. The high level control is modeled by Work-Flow Petri nets and implemented in C++ and C♯♯. Experimental results show the performance of the designed architecture.

Ubiquitous green computing techniques for high demand applications in smart environments

Ubiquitous sensor network deployments, such as the ones found in Smart cities and Ambient intelligence applications, require constantly increasing high computational demands in order to process data and offer services to users. The nature of these applications imply the usage of data centers. Research has paid much attention to the energy consumption of the sensor nodes in WSNs infrastructures. However, supercomputing facilities are the ones presenting a higher economic and environmental impact due to their very high power consumption. The latter problem, however, has been disregarded in the field of smart environment services. This paper proposes an energy-minimization workload assignment technique, based on heterogeneity and application-awareness, that redistributes low-demand computational tasks from high-performance facilities to idle nodes with low and medium resources in the WSN infrastructure. These non-optimal allocation policies reduce the energy consumed by the whole infrastructure and the total execution time.

Towards a lightweight mobile semantic-based approach for enhancing interaction with smart objects

This work describes a semantic extension for a user-smart object interaction model based on the ECA paradigm (Event-Condition-Action). In this approach, smart objects publish their sensing (event) and action capabilities in the cloud and mobile devices are prepared to retrieve them and act as mediators to configure personalized behaviours for the objects. In this paper, the information handled by this interaction system has been shaped according several semantic models that, together with the integration of an embedded ontological and rule-based reasoner, are exploited in order to (i) automatically detect incompatible ECA rules configurations and to (ii) support complex ECA rules definitions and execution. This semantic extension may significantly improve the management of smart spaces populated with numerous smart objects from mobile personal devices, as it facilitates the configuration of coherent ECA rules.

A Development Methodology to Facilitate the Integration of Smart Spaces into the Web of Things

How to create or integrate large Smart Spaces (considered as mash-ups of sensors and actuators) into the paradigm of ?Web of Things? has been the motivation of many recent works. A cutting-edge approach deals with developing and deploying web-enabled embedded devices with two major objectives: 1) to integrate sensor and actuator technologies into everyday objects, and 2) to allow a diversity of devices to plug to Internet. Currently, developers who want to use this Internet-oriented approach need have solid understanding about sensorial platforms and semantic technologies. In this paper we propose a Resource-Oriented and Ontology-Driven Development (ROOD) methodology, based on Model Driven Architecture (MDA), to facilitate to any developer the development and deployment of Smart Spaces. Early evaluations of the ROOD methodology have been successfully accomplished through a partial deployment of a Smart Hotel.

Cracking y ataques físicos sobre dispositivos electrónicos

Cracking - Ataques - Físicos - Dispositivos - Electrónicos

Integración de dispositivos de salud personal en la plataforma de telecuidado para diabetes PERSONA

La plataforma de telecuidado PERSONA se ha desarrollado en el marco del CIBER-BBN y tiene por objetivo soportar el autocuidado diario de pacientes con diabetes tipo 1. La plataforma proporciona acceso a herramientas de soporte a la decisión, de procesado automático de la información, de monitorización de las variables que afectan a la enfermedad y facilita la comunicación entre los agentes involucrados en el cuidado del paciente. La integración de dispositivos médicos interoperables es un requisito principal de la plataforma PERSONA. En este trabajo presentamos las soluciones adoptadas en cuanto a la integración de dispositivos médicos y analizamos las características de los protocolos de comunicación inalámbrica de los dispositivos considerados y los recursos necesarios para la comunicación con dispositivos móviles de telefonía.

Multiprotocol Android Application for Smart Control and Monitoring in Buildings

This paper presents a multiprotocol mobile application for building automation which supports and enables the integration of the most representative control technologies such as KNX, LonWorks and X-10. The application includes a real-time monitoring service. Finally, advanced control functionalities based on gestures recognition and predefined scenes have been implemented. This application has been developed and tested in the Energy Efficiency Research Facility located at CeDInt-UPM, where electrical loads, blinds and HVAC and lighting systems can be controlled.

Smart parking service based on wireless sensor networks

n this paper, we present the design and implementation of a prototype system of Smart Parking Services based on Wireless Sensor Networks (WSNs) that allows vehicle drivers to effectively find the free parking places. The proposed scheme consists of wireless sensor networks, embedded web-server, central web-server and mobile phone application. In the system, low-cost wireless sensors networks modules are deployed into each parking slot equipped with one sensor node. The state of the parking slot is detected by sensor node and is reported periodically to embedded web-server via the deployed wireless sensor networks. This information is sent to central web-server using Wi-Fi networks in real-time, and also the vehicle driver can find vacant parking lots using standard mobile devices.

Smart Spaces and Smart Objects interoperability Architecture (S3OiA)

The presented work aims to contribute towards the standardization and the interoperability off the Future Internet through an open and scalable architecture design. We present S³OiA as a syntactic/semantic Service-Oriented Architecture that allows the integration of any type of object or device, not mattering their nature, on the Internet of Things. Moreover, the architecture makes possible the use of underlying heterogeneous resources as a substrate for the automatic composition of complex applications through a semantic Triple Space paradigm. Created applications are dynamic and adaptive since they are able to evolve depending on the context where they are executed. The validation scenario of this architecture encompasses areas which are prone to involve human beings in order to promote personal autonomy, such as home-care automation environments and Ambient Assisted Living.

Validation tool for smart screening of language disorders in pediatrics care

Primary-care pediatricians could play a key role in early detection of development disorders as quick as they might have enough time and knowledge for suitable screenings at clinical routine. This research paper focuses on the development and validation of a knowledge-based web tool whose aim is to support a smart detection of developmental disorders in early childhood. Thus, the use of the system can trigger the necessary preventive and therapeutic actions from birth until the age of six. The platform was designed on the basis of an analysis of significant 21 cases of children with language disorders that supported the creation of a specific knowledge base, its ontology and a set of description logic relations. The resulting system is being validated in a scalable approach with a team of seven experts from the fields of neonathology, pediatrics, neurology and language therapy.

Development of a Knowledge Base for smart screening of language disorders in primary care

Monitoring of neuro-evolutive development from birth until the age of six is a decisive factor in a child's quality of life. Early detection of development disorders in early childhood can facilitate necessary diagnosis and/or treatment. Primary-care pediatricians play a key role in early detection of development alterations as they can undertake the preventive and therapeutic actions necessary in the interest of a child's optimal development. The focus of this research paper is the construction of a Knowledge Base for smart screening aimed to assist pediatricians in processes of early referral in language disorders. The proposed model provides health professionals with a decision-making tool that supports referral processes. In this way, essential diagnostic and/or therapeutic actions are triggered for a comprehensive individual development. The resulting system was developed on the basis of an analysis and verification of 21 cases of children with language disorders.