VISIONS Vehicular communication Improvement : solution based on IMS Operational Nodes and Services

Digital services and communications in vehicular scenarios provide the essential assets to improve road transport in several ways like reducing accidents, improving traffic efficiency and optimizing the transport of goods and people. Vehicular communications typically rely on VANET (Vehicular Ad hoc Networks). In these networks vehicles communicate with each other without the need of infrastructure. VANET are mainly oriented to disseminate information to the vehicles in certain geographic area for time critical services like safety warnings but present very challenging requirements that have not been successfully fulfilled nowadays. Some of these challenges are; channel saturation due to simultaneous radio access of many vehicles, routing protocols in topologies that vary rapidly, minimum quality of service assurance and security mechanisms to efficiently detect and neutralize malicious attacks. Vehicular services can be classified in four important groups: Safety, Efficiency, Sustainability and Infotainment. The benefits of these services for the transport sector are clear but many technological and business challenges need to be faced before a real mass market deployment. Service delivery platforms are not prepared for fulfilling the needs of this complex environment with restrictive requirements due to the criticism of some services To overcome this situation, we propose a solution called VISIONS “Vehicular communication Improvement: Solution based on IMS Operational Nodes and Services”. VISIONS leverages on IMS subsystem and NGN enablers, and follows the CALM reference Architecture standardized by ISO. It also avoids the use of Road Side Units (RSUs), reducing complexity and high costs in terms of deployment and maintenance. We demonstrate the benefits in the following areas: 1. VANET networks efficiency. VISIONS provide a mechanism for the vehicles to access valuable information from IMS and its capabilities through a cellular channel. This efficiency improvement will occur in two relevant areas: a. Routing mechanisms. These protocols are responsible of carrying information from a vehicle to another (or a group of vehicles) using multihop mechanisms. We do not propose a new algorithm but the use of VANET topology information provided through our solution to enrich the performance of these protocols. b. Security. Many aspects of security (privacy, key, authentication, access control, revocation mechanisms, etc) are not resolved in vehicular communications. Our solution efficiently disseminates revocation information to neutralize malicious nodes in the VANET. 2. Service delivery platform. It is based on extended enablers, reference architectures, standard protocols and open APIs. By following this approach, we reduce costs and resources for service development, deployment and maintenance. To quantify these benefits in VANET networks, we provide an analytical model of the system and simulate our solution in realistic scenarios. The simulations results demonstrate how VISIONS improves the performance of relevant routing protocols and is more efficient neutralizing security attacks than the widely proposed solutions based on RSUs. Finally, we design an innovative Social Network service based in our platform, explaining how VISIONS facilitate the deployment and usage of complex capabilities. RESUMEN Los servicios digitales y comunicaciones en entornos vehiculares proporcionan herramientas esenciales para mejorar el transporte por carretera; reduciendo el número de accidentes, mejorando la eficiencia del tráfico y optimizando el transporte de mercancías y personas. Las comunicaciones vehiculares generalmente están basadas en redes VANET (Vehicular Ad hoc Networks). En dichas redes, los vehículos se comunican entre sí sin necesidad de infraestructura. Las redes VANET están principalmente orientadas a difundir información (por ejemplo advertencias de seguridad) a los vehículos en determinadas zonas geográficas, pero presentan unos requisitos muy exigentes que no se han resuelto con éxito hasta la fecha. Algunos de estos retos son; saturación del canal de acceso de radio debido al acceso simultáneo de múltiples vehículos, la eficiencia de protocolos de encaminamiento en topologías que varían rápidamente, la calidad de servicio (QoS) y los mecanismos de seguridad para detectar y neutralizar los ataques maliciosos de manera eficiente. Los servicios vehiculares pueden clasificarse en cuatro grupos: Seguridad, Eficiencia del tráfico, Sostenibilidad, e Infotainment (información y entretenimiento). Los beneficios de estos servicios para el sector son claros, pero es necesario resolver muchos desafíos tecnológicos y de negocio antes de una implementación real. Las actuales plataformas de despliegue de servicios no están preparadas para satisfacer las necesidades de este complejo entorno con requisitos muy restrictivos debido a la criticidad de algunas aplicaciones. Con el objetivo de mejorar esta situación, proponemos una solución llamada VISIONS “Vehicular communication Improvement: Solution based on IMS Operational Nodes and Services”. VISIONS se basa en el subsistema IMS, las capacidades NGN y es compatible con la arquitectura de referencia CALM estandarizado por ISO para sistemas de transporte. También evita el uso de elementos en las carreteras, conocidos como Road Side Units (RSU), reduciendo la complejidad y los altos costes de despliegue y mantenimiento. A lo largo de la tesis, demostramos los beneficios en las siguientes áreas: 1. Eficiencia en redes VANET. VISIONS proporciona un mecanismo para que los vehículos accedan a información valiosa proporcionada por IMS y sus capacidades a través de un canal de celular. Dicho mecanismo contribuye a la mejora de dos áreas importantes: a. Mecanismos de encaminamiento. Estos protocolos son responsables de llevar información de un vehículo a otro (o a un grupo de vehículos) utilizando múltiples saltos. No proponemos un nuevo algoritmo de encaminamiento, sino el uso de información topológica de la red VANET a través de nuestra solución para enriquecer el funcionamiento de los protocolos más relevantes. b. Seguridad. Muchos aspectos de la seguridad (privacidad, gestión de claves, autenticación, control de acceso, mecanismos de revocación, etc) no están resueltos en las comunicaciones vehiculares. Nuestra solución difunde de manera eficiente la información de revocación para neutralizar los nodos maliciosos en la red. 2. Plataforma de despliegue de servicios. Está basada en capacidades NGN, arquitecturas de referencia, protocolos estándar y APIs abiertos. Siguiendo este enfoque, reducimos costes y optimizamos procesos para el desarrollo, despliegue y mantenimiento de servicios vehiculares. Para cuantificar estos beneficios en las redes VANET, ofrecemos un modelo de analítico del sistema y simulamos nuestra solución en escenarios realistas. Los resultados de las simulaciones muestran cómo VISIONS mejora el rendimiento de los protocolos de encaminamiento relevantes y neutraliza los ataques a la seguridad de forma más eficientes que las soluciones basadas en RSU. Por último, diseñamos un innovador servicio de red social basado en nuestra plataforma, explicando cómo VISIONS facilita el despliegue y el uso de las capacidades NGN.

System supporting public transport based on geolocation

El propósito de este proyecto de fin de Grado es el estudio y desarrollo de una aplicación basada en Android que proporcionará soporte y atención a los servicios de transporte público existentes en Cracovia, Polonia. La principal funcionalidad del sistema será consultar la posición de un determinado autobús o tranvía y mostrar su ubicación con exactitud. Para lograr esto, necesitaremos tres fases de desarrollo. En primer lugar, deberemos implementar un sistema que obtenga las coordenadas geográficas de los vehículos de transporte público en cada instante. A continuación, tendremos que registrar todos estos datos y almacenarlos en una base de datos en un servidor web. Por último, desarrollaremos un sistema cliente que realice consultas a tiempo real sobre estos datos almacenados, obteniendo la posición para una línea determinada y mostrando su ubicación con un marcador en el mapa. Para hacer el seguimiento de los vehículos, sería necesario tener acceso a una API pública que nos proporcionase la posición registrada por los GPS que integran cada uno de ellos. Como esta API no existe actualmente para los servicios de autobús, y para los tranvías es de uso meramente privado, desarrollaremos una segunda aplicación en Android que hará las funciones del lado servidor. En ella podremos elegir mediante una simple interfaz el número de línea y un código específico que identificará a cada vehículo en particular (e.g. podemos tener 6 tranvías recorriendo la red al mismo tiempo para la línea 24). Esta aplicación obtendrá las coordenadas geográficas del teléfono móvil, lo cual incluye latitud, longitud y orientación a través del proveedor GPS. De este modo, podremos realizar una simulación de como el sistema funcionará a tiempo real utilizando la aplicación servidora desde dentro de un tranvía o autobús y, al mismo tiempo, utilizando la aplicación cliente haciendo peticiones para mostrar la información de dicho tranvía. El cliente, además, podrá consultar la ruta de cualquier línea sin necesidad de tener acceso a Internet. Almacenaremos las rutas y paradas de cada línea en la memoria del teléfono móvil utilizando ficheros XML debido al poco espacio que ocupan y a lo útil que resulta poder consultar un trayecto en cualquier momento, independientemente del acceso a la red. El usuario también podrá consultar las tablas de horarios oficiales para cada línea. Aunque en este caso si será necesaria una conexión a Internet debido a que se realizará a través de la web oficial de MPK. Para almacenar todas las coordenadas de cada vehículo en cada instante necesitaremos crear una base de datos en un servidor. Esto se resolverá mediante el uso de MYSQL y PHP. Se enviarán peticiones de tipo GET y POST a los servicios PHP que se encargarán de traducir y realizar la consulta correspondiente a la base de datos MYSQL. Por último, gracias a todos los datos recogidos relativos a la posición de los vehículos de transporte público, podremos realizar algunas tareas de análisis. Comparando la hora exacta a la que los vehículos pasaron por cada parada y la hora a la que deberían haber pasado según los horarios oficiales, podremos descubrir fallos en estos. Seremos capaces de determinar si es un error puntual debido a factores externos (atascos, averías,…) o si por el contrario, es algo que ocurre muy a menudo y se debería corregir el horario oficial. ABSTRACT The aim of this final Project (for University) is to develop an Android application thatwill provide support and feedback to the public transport services in Krakow. The main functionality of the system will be to track the position of a desired bus or tram line, and display its position on the map. To achieve this, we will need 3 stages: the first one will be to implement a system that sends the geographical position of the public transport vehicles, the second one will be to collect this data in a web server, and the last one will be to get the last location registered for the desired line and display it on the map. For tracking the vehicles, we would need to have access to a public API that should be connected with each bus/tram GPS. As this doesn’t exist in Krakow or at least is not available for public use, we will develop a second android application that will do the server side job. We will be able to choose in a simple interface the line number and a code letter to identify each vehicle (e.g. we can have 6 trams that belong to the line number 24 working at the same time). It will take the current mobile geolocation; this includes getting latitude, longitude and bearing from the GPS provider. Thus, we will be able to make a simulation of how the system works in real time by using the server app inside a tram and at the same time, using the client app and making requests to display the information of that tram. The client will also be able to check the path of the desired line without internet access. We will store the path and stops for each line locally in the phone memory using xml files due to the few requirements of available space it needs and the usefulness of checking a path when needed. This app will also offer the functionality of checking the timetable for the line, but in this case, it will link to the official Mpk website, so Internet access will be required. For storing all the coordinates for each vehicle at every moment we will need to create a database on a server. We have decided that the easiest way is to use Mysql and PHP for the deployment of the service. We will send GET and POST requests to the php files and those files will make the according queries to our database. Finally, based on all the collected data, we will be able to get some information about errors in the system of public transport timetables. We will check at what time a line was in each specific stop and compare it with the official timetable to find mistakes of time. We will determine if it is something that happens occasionally and related to external factors (e.g. traffic jams, breakdowns…) or if on the other hand, it is something that happens very often and the public transport timetables should be looked over and corrected.

Analysis, monitoring, and management of quality of experience in video delivery services over IP

Esta tesis estudia la monitorización y gestión de la Calidad de Experiencia (QoE) en los servicios de distribución de vídeo sobre IP. Aborda el problema de cómo prevenir, detectar, medir y reaccionar a las degradaciones de la QoE desde la perspectiva de un proveedor de servicios: la solución debe ser escalable para una red IP extensa que entregue flujos individuales a miles de usuarios simultáneamente. La solución de monitorización propuesta se ha denominado QuEM(Qualitative Experience Monitoring, o Monitorización Cualitativa de la Experiencia). Se basa en la detección de las degradaciones de la calidad de servicio de red (pérdidas de paquetes, disminuciones abruptas del ancho de banda...) e inferir de cada una una descripción cualitativa de su efecto en la Calidad de Experiencia percibida (silencios, defectos en el vídeo...). Este análisis se apoya en la información de transporte y de la capa de abstracción de red de los flujos codificados, y permite caracterizar los defectos más relevantes que se observan en este tipo de servicios: congelaciones, efecto de “cuadros”, silencios, pérdida de calidad del vídeo, retardos e interrupciones en el servicio. Los resultados se han validado mediante pruebas de calidad subjetiva. La metodología usada en esas pruebas se ha desarrollado a su vez para imitar lo más posible las condiciones de visualización de un usuario de este tipo de servicios: los defectos que se evalúan se introducen de forma aleatoria en medio de una secuencia de vídeo continua. Se han propuesto también algunas aplicaciones basadas en la solución de monitorización: un sistema de protección desigual frente a errores que ofrece más protección a las partes del vídeo más sensibles a pérdidas, una solución para minimizar el impacto de la interrupción de la descarga de segmentos de Streaming Adaptativo sobre HTTP, y un sistema de cifrado selectivo que encripta únicamente las partes del vídeo más sensibles. También se ha presentado una solución de cambio rápido de canal, así como el análisis de la aplicabilidad de los resultados anteriores a un escenario de vídeo en 3D. ABSTRACT This thesis proposes a comprehensive approach to the monitoring and management of Quality of Experience (QoE) in multimedia delivery services over IP. It addresses the problem of preventing, detecting, measuring, and reacting to QoE degradations, under the constraints of a service provider: the solution must scale for a wide IP network delivering individual media streams to thousands of users. The solution proposed for the monitoring is called QuEM (Qualitative Experience Monitoring). It is based on the detection of degradations in the network Quality of Service (packet losses, bandwidth drops...) and the mapping of each degradation event to a qualitative description of its effect in the perceived Quality of Experience (audio mutes, video artifacts...). This mapping is based on the analysis of the transport and Network Abstraction Layer information of the coded stream, and allows a good characterization of the most relevant defects that exist in this kind of services: screen freezing, macroblocking, audio mutes, video quality drops, delay issues, and service outages. The results have been validated by subjective quality assessment tests. The methodology used for those test has also been designed to mimic as much as possible the conditions of a real user of those services: the impairments to evaluate are introduced randomly in the middle of a continuous video stream. Based on the monitoring solution, several applications have been proposed as well: an unequal error protection system which provides higher protection to the parts of the stream which are more critical for the QoE, a solution which applies the same principles to minimize the impact of incomplete segment downloads in HTTP Adaptive Streaming, and a selective scrambling algorithm which ciphers only the most sensitive parts of the media stream. A fast channel change application is also presented, as well as a discussion about how to apply the previous results and concepts in a 3D video scenario.

Business model with discount incentive in a P2P-cloud multimedia streaming system

Today P2P faces two important challenges: design of mechanisms to encourage users' collaboration in multimedia live streaming services; design of reliable algorithms with QoS provision, to encourage the multimedia providers employ the P2P topology in commercial live streaming systems. We believe that these two challenges are tightly-related and there is much to be done with respect. This paper analyzes the effect of user behavior in a multi-tree P2P overlay and describes a business model based on monetary discount as incentive in a P2P-Cloud multimedia streaming system. We believe a discount model can boost up users' cooperation and loyalty and enhance the overall system integrity and performance. Moreover the model bounds the constraints for a provider's revenue and cost if the P2P system is leveraged on a cloud infrastructure. Our case study shows that a streaming system provider can establish or adapt his business model by applying the described bounds to achieve a good discount-revenue trade-off and promote the system to the users.

A cost-effective methodology applied to videoconference services over hybrid clouds

This paper tackles the optimization of applications in multi-provider hybrid cloud scenarios from an economic point of view. In these scenarios the great majority of solutions offer the automatic allocation of resources on different cloud providers based on their current prices. However our approach is intended to introduce a novel solution by making maximum use of divide and rule. This paper describes a methodology to create cost aware cloud applications that can be broken down into the three most important components in cloud infrastructures: computation, network and storage. A real videoconference system has been modified in order to evaluate this idea with both theoretical and empirical experiments. This system has become a widely used tool in several national and European projects for e-learning and collaboration purposes.

Implementation of a building automation system based on semantic modeling

This paper presents an Ontology-Based multi-technology platform designed to avoid some issues of Building Automation Systems. The platform allows the integration of several building automation protocols, eases the development and implementation of different kinds of services and allows sharing information related to the infrastructure and facilities within a building. The system has been implemented and tested in the Energy Efficiency Research Facility at CeDInt-UPM.

NFC based remote control of services for interactive spaces

Ubiquitous computing (one person, many computers) is the third era in the history of computing. It follows the mainframe era (many people, one computer) and the PC era (one person, one computer). Ubiquitous computing empowers people to communicate with services by interacting with their surroundings. Most of these so called smart environments contain sensors sensing users’ actions and try to predict the users’ intentions and necessities based on sensor data. The main drawback of this approach is that the system might perform unexpected or unwanted actions, making the user feel out of control. In this master thesis we propose a different procedure based on Interactive Spaces: instead of predicting users’ intentions based on sensor data, the system reacts to users’ explicit predefined actions. To that end, we present REACHeS, a server platform which enables communication among services, resources and users located in the same environment. With REACHeS, a user controls services and resources by interacting with everyday life objects and using a mobile phone as a mediator between himself/herself, the system and the environment. REACHeS’ interfaces with a user are built upon NFC (Near Field Communication) technology. NFC tags are attached to objects in the environment. A tag stores commands that are sent to services when a user touches the tag with his/her NFC enabled device. The prototypes and usability tests presented in this thesis show the great potential of NFC to build such user interfaces.

LTE as the future railway communication system: benefits and challenges

In this paper the main challenges associated with the migration process towards LTE, will be assessed. These challenges comprise, among others, the next key topics: Reliability, Availability Maintainability and Safety (RAMS) requirements, end to end Quality of Service (QoS) requirements, system performance in high speed scenarios, communication system deployment strategy, and system backward compatibility as well as the future system features for delivering railway services. The practical evaluation of the LTE system capabilities and performance in High Speed Railway (HSR) scenarios, require the development of an LTE demonstrator and an LTE system level simulator. Under this scope, the authors have developed an RF LTE demonstrator, as well as an LTE system level simulator, that will provide valuable information for the assessing of LTE performance and suitability in real HSR scenarios. This work is being developed under the framework of a research project to evaluate the feasibility of LTE to become the new railway communication system. The companies and universities involved in this project are: Technical University of Madrid (UPM), Alcatel Lucent Spain, ADIF (Spanish Railway Infrastructure Manager), Metro de Madrid, AT4 Wireless, the University of A Coruña (UDC) and University of Málaga (UMA).

Tree and grazing influence on herbaceous pasture diversity in the Dehesa agroforestry system

Mediterranean Dehesas are one of the European natural habitat types of Community interest (43/92/EEC Directive), associated to high diversity levels and producer of important goods and services. In this work, tree contribution and grazing influence over pasture alpha diversity in a Dehesa in Central Spain was studied. We analyzed Richness and Shannon-Wiener (SW) indexes on herbaceous layer under 16 holms oak trees (64 sampling units distributed in two directions and in two distances to the trunk) distributed in four different grazing management zones (depending on species and stocking rate). Floristic composition by species or morphospecies and species abundance were analyzed for each sample unit. Linear mixed models (LMM) and generalized linear mixed models (GLMMs) were used to study relationships between alpha diversity measures and independent factors. Edge crown influence showed the highest values of Richness and SW index. No significant differences were found between orientations under tree crown influence. Grazing management had a significant effect over Richness and SW measures, specially the grazing species (cattle or sheep). We preliminary quantify and analyze the interaction of tree stratum and grazing management over herbaceous diversity in a year of extreme climatic conditions.

Impact of introducing longer and heavier vehicles on regional consumer price index and Spanish road freight transport system

This paper applies an integrated modeling approach to the case of Spain; the approach is based on a random utility-based multiregional input-output model and a road transport network model for assessing the effect of introducing longer and heavier vehicles (LHVs) on the regional consumer price index (CPI) and on the transportation system. The approach strongly supports the concept that changes in transport costs derived from the LHV allowance as well as the economic structure of regions have direct and indirect effects on the economy and on the transportation system. Results show that the introduction of LHVs might reduce prices paid by consumers for a representative basket of goods and services in the regions of Spain and would also lead to a reduction in the regional CPI. In addition, the magnitude and extent of changes in the transportation system are estimated by using the commodity-based structure of the approach to identify the effect of traffic changes on traffic flows and on pollutant emissions over the whole network.

A model for setting services on auxiliary bus lines under congestion

In this paper, a mathematical programming model and a heuristically derived solution is described to assist with the efficient planning of services for a set of auxiliary bus lines (a bus-bridging system) during disruptions of metro and rapid transit lines. The model can be considered static and takes into account the average flows of passengers over a given period of time (i.e., the peak morning traffic hour) Auxiliary bus services must accommodate very high demand levels, and the model presented is able to take into account the operation of a bus-bridging system under congested conditions. A general analysis of the congestion in public transportation lines is presented, and the results are applied to the design of a bus-bridging system. A nonlinear integer mathematical programming model and a suitable approximation of this model are then formulated. This approximated model can be solved by a heuristic procedure that has been shown to be computationally viable. The output of the model is as follows: (a) the number of bus units to assign to each of the candidate lines of the bus-bridging system; (b) the routes to be followed by users passengers of each of the origin–destination pairs; (c) the operational conditions of the components of the bus-bridging system, including the passenger load of each of the line segments, the degree of saturation of the bus stops relative to their bus input flows, the bus service times at bus stops and the passenger waiting times at bus stops. The model is able to take into account bounds with regard to the maximum number of passengers waiting at bus stops and the space available at bus stops for the queueing of bus units. This paper demonstrates the applicability of the model with two realistic test cases: a railway corridor in Madrid and a metro line in Barcelona Planificación de los servicios de lineas auxiliares de autobuses durante las incidencias de las redes de metro y cercanías. El modelo estudia el problema bajo condiciones de alta demanda y condiciones de congestión. El modelo no lineal resultante es resuelto mediante heurísticas que demuestran su utilidad. Se demuestran los resultados en dos corredores de las ciudades de Barcelona y Madrid.

Semantic Annotation of RESTful and WFS OGC services

Actualmente, la Web provee un inmenso conjunto de servicios (WS-*, RESTful, OGC WFS), los cuales están normalmente expuestos a través de diferentes estándares que permiten localizar e invocar a estos servicios. Estos servicios están, generalmente, descritos utilizando información textual, sin una descripción formal, es decir, la descripción de los servicios es únicamente sintáctica. Para facilitar el uso y entendimiento de estos servicios, es necesario anotarlos de manera formal a través de la descripción de los metadatos. El objetivo de esta tesis es proponer un enfoque para la anotación semántica de servicios Web en el dominio geoespacial. Este enfoque permite automatizar algunas de las etapas del proceso de anotación, mediante el uso combinado de recursos ontológicos y servicios externos. Este proceso ha sido evaluado satisfactoriamente con un conjunto de servicios en el dominio geoespacial. La contribución principal de este trabajo es la automatización parcial del proceso de anotación semántica de los servicios RESTful y WFS, lo cual mejora el estado del arte en esta área. Una lista detallada de las contribuciones son: • Un modelo para representar servicios Web desde el punto de vista sintáctico y semántico, teniendo en cuenta el esquema y las instancias. • Un método para anotar servicios Web utilizando ontologías y recursos externos. • Un sistema que implementa el proceso de anotación propuesto. • Un banco de pruebas para la anotación semántica de servicios RESTful y OGC WFS. Abstract The Web contains an immense collection of Web services (WS-*, RESTful, OGC WFS), normally exposed through standards that tell us how to locate and invocate them. These services are usually described using mostly textual information and without proper formal descriptions, that is, existing service descriptions mostly stay on a syntactic level. If we want to make such services potentially easier to understand and use, we may want to annotate them formally, by means of descriptive metadata. The objective of this thesis is to propose an approach for the semantic annotation of services in the geospatial domain. Our approach automates some stages of the annotation process, by using a combination of thirdparty resources and services. It has been successfully evaluated with a set of geospatial services. The main contribution of this work is the partial automation of the process of RESTful and WFS semantic annotation services, what improves the current state of the art in this area. The more detailed list of contributions are: • A model for representing Web services. • A method for annotating Web services using ontological and external resources. • A system that implements the proposed annotation process. • A gold standard for the semantic annotation of RESTful and OGC WFS services, and algorithms for evaluating the annotations.

Personalisation of intelligent homecare services adapted to children with motor impairments

Ambient Intelligence could support innovative application domains like motor impairments' detection at the home environment. This research aims to prevent neurodevelopmental disorders through the natural interaction of the children with embedded intelligence daily life objects, like home furniture and toys. Designed system uses an interoperable platform to provide two intelligent interrelated home healthcare services: monitoring of children¿s abilities and completion of early stimulation activities. A set of sensors, which are embedded within the rooms, toys and furniture, allows private data gathering about the child's interaction with the environment. This information feeds a reasoning subsystem, which encloses an ontology of neurodevelopment items, and adapts the service to the age and acquisition of expected abilities. Next, the platform proposes customized stimulation services by taking advantage of the existing facilities at the child's environment. The result integrates Embedded Sensor Systems for Health at Mälardalen University with UPM Smart Home, for adapted services delivery.

Improving brain injury cognitive rehabilitation by personalized telerehabilitation services: Guttmann neuropersonal trainer

Cognitive rehabilitation aims to remediate or alleviate the cognitive deficits appearing after an episode of acquired brain injury (ABI). The purpose of this work is to describe the telerehabilitation platform called Guttmann Neuropersonal Trainer (GNPT) which provides new strategies for cognitive rehabilitation, improving efficiency and access to treatments, and to increase knowledge generation from the process. A cognitive rehabilitation process has been modeled to design and develop the system, which allows neuropsychologists to configure and schedule rehabilitation sessions, consisting of set of personalized computerized cognitive exercises grounded on neuroscience and plasticity principles. It provides remote continuous monitoring of patient's performance, by an asynchronous communication strategy. An automatic knowledge extraction method has been used to implement a decision support system, improving treatment customization. GNPT has been implemented in 27 rehabilitation centers and in 83 patients' homes, facilitating the access to the treatment. In total, 1660 patients have been treated. Usability and cost analysis methodologies have been applied to measure the efficiency in real clinical environments. The usability evaluation reveals a system usability score higher than 70 for all target users. The cost efficiency study results show a relation of 1-20 compared to face-to-face rehabilitation. GNPT enables brain-damaged patients to continue and further extend rehabilitation beyond the hospital, improving the efficiency of the rehabilitation process. It allows customized therapeutic plans, providing information to further development of clinical practice guidelines.

Pathways towards the integration of periurban agrarian ecosystems into the spatial planning system

The potential of periurban agrarian ecosystems is recognized as one of the cornerstones for improving urban sustainability; however, this potential has been disregarded in spatial planning and decision making. The main goal of the PAEc-SP project was to assess the feasibility of integrating periurban agricultural areas into spatial planning by developing a viable ecosystem services-based methodology