The potential of organic fertilizers and water management to reduce N2O emissions in Mediterranean climate cropping systems. A review.

Environmental problems related to the use of synthetic fertilizers and to organic waste management have led to increased interest in the use of organic materials as an alternative source of nutrients for crops, but this is also associated with N2O emissions. There has been an increasing amount of research into the effects of using different types of fertilization on N2O emissions under Mediterranean climatic conditions, but the findings have sometimes been rather contradictory. Available information also suggests that water management could exert a high influence on N2O emissions. In this context, we have reviewed the current scientific knowledge, including an analysis of the effect of fertilizer type and water management on direct N2O emissions. A meta-analysis of compliant reviewed experiments revealed significantly lower N2O emissions for organic as opposed to synthetic fertilizers (23% reduction). When organic materials were segregated in solid and liquid, only solid organic fertilizer emissions were significantly lower than those of synthetic fertilizers (28% reduction in cumulative emissions). The EF is similar to the IPCC factor in conventionally irrigated systems (0.98% N2O-N N applied−1), but one order of magnitude lower in rainfed systems (0.08%). Drip irrigation produces intermediate emission levels (0.66%). Differences are driven by Mediterranean agro-climatic characteristics, which include low soil organic matter (SOM) content and a distinctive rainfall and temperature pattern. Interactions between environmental and management factors and the microbial processes involved in N2O emissions are discussed in detail. Indirect emissions have not been fully accounted for, but when organic fertilizers are applied at similar N rates to synthetic fertilizers, they generally make smaller contributions to the leached NO3− pool. The most promising practices for reducing N2O through organic fertilization include: (i) minimizing water applications; (ii) minimizing bare soil; (iii) improving waste management; and (iv) tightening N cycling through N immobilization. The mitigation potential may be limited by: (i) residual effect; (ii) the long-term effects of fertilizers on SOM; (iii) lower yield-scaled performance; and (iv) total N availability from organic sources. Knowledge gaps identified in the review included: (i) insufficient sampling periods; (ii) high background emissions; (iii) the need to provide N2O EF and yield-scaled EF; (iv) the need for more research on specific cropping systems; and (v) the need for full GHG balances. In conclusion, the available information suggests a potential of organic fertilizers and water-saving practices to mitigate N2O emissions under Mediterranean climatic conditions, although further research is needed before it can be regarded as fully proven, understood and developed.

N-Management using Nitrification inhibitor DMPP to Reduce Nitrogen Oxide Emissions in Mediterranean Winter Barley.

Increasing nitrogen (N) use efficiency during crop production is paramount both from an economic and environmental perspective. A proposed measure to achieve it is to split the addition of fertilizers with more than on application. For a winter crop under Mediterranean climatic conditions, the most common application pattern consists of a basal fertilization (October-November) an a top-dressing (February-March).

Thermographic imaging: assessment of drought and heat tolerance in Spanish germplasm of Brachypodium distachyon.

The annual grass Brachypodium distachyon has been recently recognized as the model plant for functional genomics of temperate grasses, including cereals of economic relevance like wheat and barley. Sixty-two lines of B. distachyon were assessed for response to drought stress and heat tolerance. All these lines, except the reference genotype BD21, derive from specimens collected in 32 distinct locations of the Iberian Peninsula, covering a wide range of geo- climatic conditions. Sixteen lines of Brachypodium hybridum, an allotetraploid closely related to B. distachyon were used as reference of abiotic-stress well-adapted genotypes. Drought tolerance was assessed in a green-house trial. At the rosette-stage, no irrigation was applied to treated plants whereas their replicates at the control were maintained well watered during all the experiment. Thermographic images of treated and control plants were taken after 2 and 3 weeks of drought treatment, when stressed plants showed medium and extreme wilting symptoms. The mean leaf temperature of stressed (LTs) and control (LTc) plants was estimated based upon thermographic records from selected pixels (183 per image) that strictly correspond to leaf tissue. The response to drought was based on the analysis of two parameters: LTs and the thermal difference (TD) between stressed and control plants (LTs – LTc). The response to heat stress was based on LTc. Comparison of the mean values of these parameters showed that: 1) Genotypes better adapted to drought (B. hybridum lines) presented a higher LTs and TD than B. distachyon lines. 2) Under high temperature conditions, watered plants of B. hybridum lines maintained lower LTc than those of B. distachyon. Those results suggest that in these species adaptation to drought is linked to a more efficient stomata regulation: under water stress stomata are closed, increasing foliar temperature but also water use efficiency by reducing transpiration. With high temperature and water availability the results are less definite, but still seems that opening stomata allow plants to increase transpiration and therefore to diminish foliar temperature.

Tree and grazing influence on herbaceous pasture diversity in the Dehesa agroforestry system

Mediterranean Dehesas are one of the European natural habitat types of Community interest (43/92/EEC Directive), associated to high diversity levels and producer of important goods and services. In this work, tree contribution and grazing influence over pasture alpha diversity in a Dehesa in Central Spain was studied. We analyzed Richness and Shannon-Wiener (SW) indexes on herbaceous layer under 16 holms oak trees (64 sampling units distributed in two directions and in two distances to the trunk) distributed in four different grazing management zones (depending on species and stocking rate). Floristic composition by species or morphospecies and species abundance were analyzed for each sample unit. Linear mixed models (LMM) and generalized linear mixed models (GLMMs) were used to study relationships between alpha diversity measures and independent factors. Edge crown influence showed the highest values of Richness and SW index. No significant differences were found between orientations under tree crown influence. Grazing management had a significant effect over Richness and SW measures, specially the grazing species (cattle or sheep). We preliminary quantify and analyze the interaction of tree stratum and grazing management over herbaceous diversity in a year of extreme climatic conditions.

The cup anemometer, a fundamental meteorological instrument for the wind energy industry

The cup anemometer has been used widely by the wind energy industry since its early beginning, covering two fundamental aspects: wind mill performance control and wind energy production forecast. Furthermore, despite modern technological advances such as LIDAR and SODAR, the cup anemometer remains clearly the most used instrument by the wind energy industry. Together with the major advantages of this instrument (precision, robustness), some issues must be taken into account by scientists and researchers when using it. Overspeeding, interaction with stream wakes due to allocation on masts and wind- mills, loss of performance due to wear and tear, change of performance due to different climatic conditions, checking of the maintenance status and recalibration, etc. In the present work a review of the research campaigns carried out at the IDR/UPM Institute to analyze cup anemometer performance is included. Several aspects of this instrument are examined: the calibration process, the loss of performances due to aging and wear and tear, the effect of changes of air density, the rotor aerodynamics, and the harmonic terms contained in the anemometer output signal and their possible relation to the anemometer performances.

Estudio en modelo físico a escala reducida de la viabilidad del empleo de buques fondeados como diques flotantes para abrigo portuario y defensa de costas

Los diques flotantes son estructuras que atenúan la energía del oleaje fundamentalmente por reflexión y turbulencia. Aunque presentan importantes ventajas en términos constructivos y medioambientales, su efectividad es limitada y en la práctica sólo se emplean en condiciones climáticas propias de zonas con oleajes poco energéticos. Por otro lado, el buque es la estructura flotante por excelencia y su empleo para el abrigo portuario y costero en determinadas situaciones puede aportar las ventajas propias de los diques flotantes, al tiempo que ampliar el rango de oleajes frente a los que estas estructuras son efectivas. El propósito de esta Tesis Doctoral es evaluar la viabilidad del empleo de buques fondeados como diques flotantes para el abrigo portuario y costero. Para ello, se han realizado ensayos en modelo físico a escala reducida en un canal de oleaje del Centro de Estudios de Puertos y Costas (CEPYC), con el objeto de determinar los coeficientes de transmisión (Ct), reflexión (Cr) y disipación (Cd) de barcos de diversas tipologías y dimensiones, sometidos a diferentes oleajes en distintas situaciones de carga, fondeo y profundidad del emplazamiento. La efectividad de los buques empleados en los ensayos se ha determinado mediante el análisis de dichos coeficientes y su variación con la altura de ola y el periodo de los oleajes incidentes. Además, se han registrado las fuerzas existentes en las cadenas de fondeo con objeto de comprobar la viabilidad del mismo y facilitar una estimación del diámetro de las cadenas que serían necesarias en cada situación. Posteriormente, se han aplicado los resultados obtenidos en los ensayos en modelo físico reducido a dos situaciones de abrigo portuario y costero. La primera aplicación consiste en el empleo de buques como defensa temporal en fases constructivas por medios marítimos, partiendo de la hipótesis de que, actuando como diques flotantes, puede proteger la zona de la obra y ampliar las ventanas temporales de periodos de actividad en obra marítima. Las actividades que se han analizado son las de dragado de fondos, vertidos de material granular y transporte y fondeo de cajones flotantes para diques y muelles. La segunda aplicación estudiada es el empleo de buques para la protección costera y la formación de salientes y tómbolos. Los coeficientes de transmisión obtenidos se han introducido en formulaciones analíticas que permiten prever la evolución de la costa frente a la protección procurada por el buque actuando como dique flotante exento. Finalmente se han redactado las conclusiones de la investigación y se han propuesto nuevas líneas de investigación relacionadas con esta Tesis Doctoral. Floating breakwaters are structures which attenuate wave energy mainly by reflection and turbulence. They display advantages in terms of construction and ecology, amongst others. However, their use is restricted in practice to certain areas with good climatic conditions and low energy waves. Moreover, ships are the most common floating structures and their use for port and coastal shelter in certain situations could widen the range of applicability in addition to the rest of advantages of floating breakwaters. The purpose of this research is to assess the feasibility of ships anchored as floating breakwaters for port and coastal protection. To that end, tests in a scaled down physical model have been conducted in a wave flume in the Centre of Port and Coastal Studies (CEPYC), in order to determine the transmission (Ct), reflection (Cr) and dissipation (Cd) coefficients of ships of diverse types and dimensions, under different wave, load, anchoring and depth conditions. The effectiveness of the several ships used in the tests has been determined by analyzing these coefficients and their variation with the wave height and period of the incident waves. In addition, the existing forces in the anchor chains have been registered to verify the feasibility of the anchoring systems, as well as to provide an estimation of the diameter of the chains that would be needed in each situation. Subsequently, the results of the tests have been applied to two situations of port and coastal protection. The first one is the use of ships as a temporary defense for maritime works with construction phases by maritime means, on the assumption that, acting as floating breakwaters, they can protect the work area and increase the time windows of periods of activity in maritime works. Dredging, dumping of granular material and transport and positioning of big concrete caissons for docks and breakwaters were the activities analyzed. The second situation is the use of ships for coastal protection and forming salients of sand or tombolos. Some analytical formulations which take into account the transmission coefficients from the tests have been used to predict the evolution of the coastline under the protection given by the ships acting as detached floating breakwaters. Finally, the conclusions of the research have been addressed and the proposal of new lines of work related to the topic has been made.

The Cup Anemometer, a Fundamental Meteorological Instrument for the Wind Energy Industry. Research at the IDR/UPM Institute

The results of several research campaigns investigating cup anemometer performance carried out since 2008 at the IDR/UPM Institute are included in the present paper. Several analysis of large series of calibrations were done by studying the effect of the rotor’s geometry, climatic conditions during calibration, and anemometers’ ageing. More specific testing campaigns were done regarding the cup anemometer rotor aerodynamics, and the anemometer signals. The effect of the rotor’s geometry on the cup anemometer transfer function has been investigated experimentally and analytically. The analysis of the anemometer’s output signal as a way of monitoring the anemometer status is revealed as a promising procedure for detecting anomalies.

Edaphic controls on ecosystem-level carbon allocation in two contrasting Amazon forests

Three components of carbon allocation, biomass, flux, and partitioning, were measured in two contrasting Amazon forests growing under similar climatic conditions. Allocation to aboveground compartments was highest in a high-stature forest growing on clay soils, while allocation to fine roots was higher in a short-stature forest growing on white sands. Differences in carbon allocation components where not proportional between the two forests, with soils controlling a trade-off between allocation to fine roots versus aboveground parts.

Redes de información y conocimiento climatológico en el mundo hispánico del siglo XVIII

Durante la Ilustración, el imperio español alcanzó su máxima amplitud y las instituciones oficiales incrementaron su apoyo a las ciencias. Para defender sus fronteras y ejercer con eficacia el poder político, económico y religioso, la Corona y la Iglesia necesitaban obtener información precisa --incluida la climatológica-- de las posesiones españolas y de los pobladores de éstas. Fueron varios los procedimientos empleados para ello: sistema de cuestionarios y relaciones geográficas, estudios medico-topográficos, visitas e inspecciones oficiales, expediciones político-científicas, correspondencia epistolar, artículos periodísticos, etc. Dichos procedimientos fueron aplicados por redes de informadores cuyas actuaciones se basaban en la división del trabajo, el reparto de colaboradores en diferentes lugares, el uso de códigos de comunicación comprensibles, el envío de los resultados a los superiores jerárquicos y la toma de decisiones por las autoridades competentes. Las redes de información estaban sometidas a dictámenes que normalizaban su creación y continuidad temporal, daban forma a su estructura interna, especificaban sus cometidos y obligaban a cumplir protocolos y plazos. En su seno se idearon planes de investigación integrados en el estudio general de la Tierra, el ser humano y la cultura. El beneficio de las actuaciones de sus miembros se plasmó en cubrir grandes ámbitos geográficos con el consiguiente ahorro de tiempo, esfuerzos y medios. En sus correspondientes contextos, los miembros de las redes efectuaron estudios climatológicos conforme a intereses, imposiciones y circunstancias específicas. Así, los médicos se interesaron por las condiciones climáticas que influían en la salud humana; los funcionarios reales y los ingenieros militares describieron los climas locales y regionales aptos para el fomento y el control político, jurídico y educativo de los habitantes de los territorios hispánicos; los expedicionarios estudiaron las interacciones entre los fenómenos naturales y las influencias de los accidentes geográficos en los climas; los clérigos se interesaron por los aspectos estéticos, apologéticos y contemplativos de los climas; finalmente, en la prensa de la época se publicaron registros meteorológicos periódicos y trabajos climatológicos varios. En definitiva, el saber climatológico en el mundo hispánico ilustrado aportó algunos rasgos esenciales a la climatología en una etapa pre-fundacional de esta disciplina. Dichos rasgos se desarrollaron generalmente en una escala local o regional y se refirieron a los siguientes asuntos: el calor como principal agente de las modificaciones atmosféricas, de la formación de vapor acuoso y de las precipitaciones; la influencia del suelo en el aumento de humedad y calor en el aire; el poder de los vientos para trasladar de un lugar a otro el frío o el calor, el vapor de agua, los fenómenos atmosféricos y los agentes responsables de las enfermedades contagiosas; las propiedades del aire atmosférico y su capacidad para interaccionar con el medio ambiente; la condición estática y repetitiva de los climas, si bien se admitió que dichos fenómenos podían sufrir modificaciones; la corroboración experimental de las diferencias climáticas entre las zonas tropicales y medias del planeta; la refutación de que la naturaleza americana y sus habitantes eran inferiores a los europeos; y la demostración de que los principios rectores de los fenómenos físicos del Viejo y el Nuevo Mundo eran idénticos. Desde el último tercio del siglo XVIII, los documentos producidos por los componentes de las redes de información incluyeron datos meteorológicos. Pero no siempre se emplearon los mismos instrumentos de medida ni se siguieron los mismos protocolos de indagación en idénticas condiciones. Además, y salvo excepciones, los períodos durante los cuales se recabaron datos atmosféricos fueron relativamente cortos, y los expertos no efectuaron las mismas operaciones aritméticas con los parámetros. Por esta razón, y por la orientación utilitaria de los ilustrados hispánicos, el saber climatológico no obtuvo en el período y en el ámbito geográfico considerados resultados teóricos apreciables; en cambio, dio lugar a una gran cantidad de actividades prácticas con aplicaciones a la medicina, la agricultura, la náutica, el fomento, la prevención de riesgos naturales, etc. La principal utilidad de este trabajo consiste en servir de complemento a los procedimientos actualmente en uso en historia de la hidrología y en climatología histórica. ABSTRACT During the Enlightenment, the Spanish Empire achieved its highest length and State institutions increased their support to sciences. In order to defend their frontiers and to exercise political, economical and religious power, the Crown and the Church needed exact information --including the climatologic one-- about its possessions and its habitants. Some of the procedures employed to get that objective were: system of questionnaires and geographic relations, medical-topographic studies, official visits and inspections, political-scientific expeditions, direct mail, journalistic articles, etc. Those procedures were applied by informers´ networks which obtained, manned and transmitted every kind of data about the natural and moral reality of the Hispanic territories; their actions were based on the division of tasks, the distribution of collaborators at several places, the use of understandable communication codes and the sending of results to the hierarchical superiors; after, the competent authorities took decisions. The information networks were subjected to rules witch regulated its creation, temporary continuity, interior structure, objectives, protocols and periods. Their memberships invented plans about the general research of the Earth, the human beings and the culture; and they contributed to get benefits because of covering large geographic frames and economizing time, effort and means. According to their specifics contexts, concerns, impositions and circumstances, the informers performed climatologic tasks. Thus, the physicians were interested in the climatic conditions which affected to human health; the royal officers and military engineers described the most propitious climates to patronage and political, lawful and educative control of inhabitants of Hispanic territories; the participants in politic-scientific expeditions studied the interactions among natural phenomena and the influence of geographic aspects on the climate; the clergymen underlined the esthetic, apologetic and contemplative face of climates; finally, in the newspapers were published a lot of meteorological data and climatologic works. So, the climatologic knowledge in the Hispanic enlightened world added these essential aspects --referred in a local and regional area-- during the pre-foundational epoch of the climatology: the heat as first agent of atmospheric modifications, aqueous vapor and precipitations; the influx of the land in the increment of humidity and heat of the air; the power of the winds to convey the cold, the heat, the aqueous vapor, the atmospheric phenomena and the agents which caused contagious maladies; the properties of the air and its faculty to mediate with the environs; the static and repetitive condition of the climate and its possibility to experience change; the experimental confirmation of climatic varieties between tropical and central areas of the planet; the negation of the inferiority of the American nature and inhabitants; the demonstration about the equality of the rules which conducted physical phenomena in the Old and the New world. Since the last third part of the eighteenth century, the documents produced by the members of the networks included meteorological data. But the informers were not used to employ the same measure instruments and homogeneous protocols completion in the same conditions. Exceptions besides, the times of taking atmospheric data, usually were very short; and the experts did not carry out the same arithmetical operations with parameters. Because of this reason and the utilitarian guidance of the informers, during the Hispanic Enlightenment, it was not possible to obtain theoretic conclusions about climatologic knowledge; but there were a lot of practical activities applied to Medicine, Agriculture, Navigation, patronage, prevention of natural risks, etc. The main utility of this work consist in favoring the present procedures of the History of Hydrology and Historic Climatology.

SOPHIA CPV module round robin: power rating at CSOC

Within the European funded project SOPHIA, a Round Robin measurement on CPV module has been initiated. Seven different test laboratories located in Europe between 48°N and 37°N perform measurements of four SOITEC CPV modules. The modules are electrically characterized with different measurement equipment under various climatic conditions. One pyrheliometer and one spectral sensor based on component cells are shipped together with the modules. This ensures that the irradiance and spectrum, two factors with high impact on CPV module performance, are measured with the identical equipment at each site. The round robin activity is performed in closeco-operation with the IEC TC82 WG7 power rating team in order to support the work on the CPV module power rating draft standard 62670-3. The resultingrated module power outputs at CSOC (Concentrator Standard Operating Conditions) are compared amongst the power rating methods and amongst the test labs. In this manner, a deviation in rated power output between different test labs and power rating methods is determined.

Adaptación de una central térmica de carbón a la Directiva de Emisiones Industriales

El proyecto que se presenta a continuación recoge la adaptación de una Central Térmica de carbón al cumplimiento de la DIRECTIVA 2010/75/UE DEL PARLAMENTO EUROPEO Y DEL CONSEJO de 24 de noviembre de 2010 sobre las emisiones industriales. La Central sobre la que se realiza el proyecto tiene un grupo térmico de carbón suscritico refrigerado por agua, con una potencia a plena carga de 350 MWe y de 190 MWe a mínimo técnico. Genera 1 090 t/h de vapor a 540 °C y 168 kg/cm2 funcionando a plena carga. Actualmente las emisiones de NOx son de 650 mg/m3, (condiciones normales, seco, 6 % O2). El objeto del proyecto es reducir estas emisiones a un valor máximo de 200 mg/m3 en las mismas condiciones. El proyecto analiza detalladamente las condiciones actuales de operación de la instalación en cuanto a combustible utilizado, horas de funcionamiento, condiciones climáticas y producción. Se analiza así mismo, todas las técnicas disponibles en mercado para la reducción del NOx, diferenciando entre medidas primarias (actúan sobre los efectos de formación) y secundarias (limpieza de gases). Las medidas primarias ya están implementadas en la central, por tanto, el proyecto plantea la reducción con medidas secundarias. De las medidas secundarias analizadas se ha seleccionado la instalación de un Reactor de Reducción Selectiva Catalítica (Reactor SCR). Tras un análisis de los diferentes reactores y catalizadores disponibles se ha seleccionado un reactor de configuración High-dust, una disposición de catalizador en 3 capas más 1, cuyos componentes están basados en óxidos metálicos (TiO2, V2O5, WO3) y estructura laminar. Se ha buscado la instalación del reactor para operar a una temperatura inferior a 450 °C. Como agente reductor se ha seleccionado NH3 a una dilución del 24,5 %. El proyecto recoge también el diseño de todo el sistema de almacenamiento, evaporación, dilución e inyección de amoniaco. El resultado del proyecto garantiza una concentración en los gases de salida por la chimenea inferior 180 mg/m3(n) de NOx. La reducción del NOx a los límites establecidos, tienen un coste por MWh neto generado para la central, trabajando 60 % a plena carga y 40 % a mínimo técnico y una amortización de 10 años, de 4,10 €/MWh. ABSTRACT The following project shows the compliance adjustment of a coal-fired power station to the 2010/75/EU Directive of the European Parliament and Council 24th November 2010 on industrial emissions. The project is based on a power station with a subcritical thermal coal unit, cooled with water, with a maximum power of 350 MWe and a technical minimum of 190 MWe. It produces 1 090 t/h of steam at 540 ° C and 168 kg/cm2 operating under full load. Currently, NOx emissions are 650 mg / m3 (normal conditions, dry, 6% O2). The project aims to reduce these emissions to a maximum value of 200 mg / m3 under the same conditions. The project analyses in detail the current operating conditions of the system in terms of fuel used, hours of operation, climatic conditions and production. In addition, it also analyses every available technique of NOx reduction on the market, distinguishing between primary (acting on the effects of formation) and secondary measures (gas cleaning). Primary measures are already implemented in the plant, thus proposing reduction with secondary measures. Among the secondary measures analyzed, it has been selected to install a Selective Catalytic Reduction Reactor (SCR Reactor). Having researched the different reactors and catalysts available, for the reactor has been selected High-dust configuration, an arrangement of catalyst in 3 layers plus 1, whose components are based on metal oxides (TiO2, V2O5, WO3) and laminar structure. The reactor has been sought facility to operate at a temperature below 450 ° C. NH3 diluted to 24,5 % has been selected as reducing agent. The project also includes the design of the entire storage system, evaporation, dilution and ammonia injection. The results of the project ensure a gas concentration in the lower chimney exit below 180 mg / m3(n) NOx. The reduction of NOx to the established limits has a cost per net MWh generated in the plant, working at 60% of full load and at 40% of technical minimum, with an amortization of 10 years, 4,10 € / MWh.

Testing of crop Models for Accurate Predictions of Evapotranspiration and crop Water Use

All crop models, whether site-specific or global-gridded and regardless of crop, simulate daily crop transpiration and soil evaporation during the crop life cycle, resulting in seasonal crop water use. Modelers use several methods for predicting daily potential evapotranspiration (ET), including FAO-56, Penman-Monteith, Priestley-Taylor, Hargreaves, full energy balance, and transpiration water efficiency. They use extinction equations to partition energy to soil evaporation or transpiration, depending on leaf area index. Most models simulate soil water balance and soil-root water supply for transpiration, and limit transpiration if water uptake is insufficient, and thereafter reduce dry matter production. Comparisons among multiple crop and global gridded models in the Agricultural Model Intercomparison and Improvement Project (AgMIP) show surprisingly large differences in simulated ET and crop water use for the same climatic conditions. Model intercomparisons alone are not enough to know which approaches are correct. There is an urgent need to test these models against field-observed data on ET and crop water use. It is important to test various ET modules/equations in a model platform where other aspects such as soil water balance and rooting are held constant, to avoid compensation caused by other parts of models. The CSM-CROPGRO model in DSSAT already has ET equations for Priestley-Taylor, Penman-FAO-24, Penman-Monteith-FAO-56, and an hourly energy balance approach. In this work, we added transpiration-efficiency modules to DSSAT and AgMaize models and tested the various ET equations against available data on ET, soil water balance, and season-long crop water use of soybean, fababean, maize, and other crops where runoff and deep percolation were known or zero. The different ET modules created considerable differences in predicted ET, growth, and yield.

Sustainable Living. Environmental integration in 15 vernacular Spanish houses

This research was published online by the Spanish Ministry of Public Works in 2012. It collects 20 years of work that contributes to recognizing and enhancing the vernacular architecture in Spain, which has no known author, but has significant values and shows a wide variety of adaptation examples to climatic and environmental conditions. The research analyzes in detail and from different scales 15 houses in different climatic conditions and geographic regions in order to go deeper into the specific characteristics of each one of them from the perspective of sustainability. These houses are located in Tenerife, Salamanca, Huelva, Granada, Toledo, Madrid, Menorca, Alicante, Mallorca, Almería, La Coruña, Cantabria, Huesca and Lugo. The article analyzes the traditional dwelling, the natural environment and conditions that surround it and intends to discover the formal dialogue among them, as well as the origin of the design strategies

Integral energy behaviour of photovoltaic semi-transparent glazing elements for building integration

La hipótesis general que esta tesis quiere demostrar es que la integración arquitectónica de sistemas fotovoltaicos semitransparentes (STPV) puede contribuir a mejorar la eficiencia energética de los edificios. Por lo tanto, la investigación se centra en el desarrollo de una metodología capaz de cuantificar la reducción de la demanda energética del edificio proporcionada por estas novedosas soluciones constructivas. Al mismo tiempo, los parámetros de diseño de las soluciones STPV se han analizado para establecer cuales presentan el mayor impacto sobre el balance energético global del edificio y por lo tanto tienen que ser cuidadosamente definidos a la hora de optimizar el comportamiento energético del mismo. A la luz de estos objetivos, la metodología de estudio se ha centrado en tres puntos principales:  Caracterizar el comportamiento energético global de sistemas STPV en condiciones de operación realistas, similares a las que se darían en un sistema real;  Caracterizar el comportamiento energético global de sistemas STPV en condiciones controladas, con el objetivo de estudiar la variación del comportamiento del los elementos en función de parámetro de diseño y operación;  Evaluar el potencial de ahorro energético global de los sistemas STPV en comparación con soluciones acristaladas convencionales al variar de las condiciones de contorno constituidas por los parámetros de diseño (como el grado de transparencia), las características arquitectónicas (como el ratio entre superficie acristalada y superficie opaca en la fachada del edificio) y las condiciones climáticas (cubriendo en particular la climatología europea). En síntesis, este trabajo intenta contribuir a comprender la interacción que existe entre los sistemas STPV y el edificio, proporcionando tanto a los fabricantes de los componentes como a los profesionales de la construcción información valiosa sobre el potencial de ahorro energético asociado a estos nuevos sistemas constructivos. Asimismo el estudio define los parámetros de diseño adecuados para lograr soluciones eficientes tanto en proyectos nuevos como de rehabilitación. ABSTRACT The general hypothesis this work seeks to demonstrate is that the architectural integration of Semi-Transparent Photovoltaic (STPV) systems can contribute to improving the energy efficiency of buildings. Accordingly, the research has focused on developing a methodology able to quantify the building energy demand reduction provided by these novel constructive solutions. At the same time, the design parameters of the STPV solution have been analysed to establish which of them have the greatest impact on the global energy balance of the building, and therefore which have to be carefully defined in order to optimize the building operation. In the light of these goals, the study methodology has focused on three main points:  To characterise the global energy behaviour of STPV systems in realistic operating conditions, similar to those in which a real system will operate;  To characterise the global energy behaviour of STPV systems in controlled conditions in order to study how the performance varies depending on the design and operating parameters;  To assess the global energy saving potential of STPV systems in comparison with conventional glazing solutions by varying the boundary conditions, including design parameters (such as the degree of transparency), architectural characteristics (such as the Window to Wall Ratio) and climatic conditions (covering the European climatic conditions). In summary, this work has sought to contribute to the understanding of the interaction between STPV systems and the building, providing both components manufacturers and construction technicians, valuable information on the energy savings potential of these new construction systems and defining the appropriate design parameters to achieve efficient solutions in both new and retrofitting projects.

Viticultura y Cambio Climático en España: Vulnerabilidad en las distintas regiones y estrategias de adaptación frente al desarrollo de nuevas políticas

El presente trabajo realiza un análisis de la vulnerabilidad de la viticultura en España ante el Cambio Climático que contribuya a la mejora de la capacidad de respuesta del sector vitivinícola a la hora de afrontar los retos de la globalización. Para ello se analiza el impacto que puede tener el Cambio Climático en primer lugar sobre determinados riesgos ocasionados por eventos climáticos adversos relacionados con extremos climáticos y en segundo lugar, sobre los principales índices agro-climáticos definidos en el Sistema de Clasificación Climática Multicriterio Geoviticultura (MCGG), que permiten clasificar las zonas desde un punto de vista de su potencial climático. Para el estudio de las condiciones climáticas se han utilizado los escenarios de Cambio Climático regionalizados del proyecto ESCENA, desarrollados dentro del Plan Nacional de Adaptación al Cambio Climático (PNACC) con el fin de promover iniciativas de anticipación y respuesta al Cambio Climático hasta el año 2050. Como parte clave del estudio de la vulnerabilidad, en segundo lugar se miden las necesidades de adaptación para 56 Denominaciones de Origen Protegidas, definidas por los impactos y de acuerdo con un análisis de sensibilidad desarrollado en este trabajo. De este análisis se desprende que los esfuerzos de adaptación se deberían centrar en el mantenimiento de la calidad sobre todo para mejorar las condiciones en la época de maduración en los viñedos de la mitad norte, mientras que en las zonas de la mitad sur y del arco mediterráneo, además deberían buscar mantener la productividad en la viticultura. Los esfuerzos deberían ser más intensos en esta zona sur y también estarían sujetos a más limitaciones, ya que por ejemplo el riego, que podría llegar a ser casi obligatorio para mantener el cultivo, se enfrentaría a un contexto de mayor competencia y escasez de recursos hídricos. La capacidad de afrontar estas necesidades de adaptación determinará la vulnerabilidad del viñedo en cada zona en el futuro. Esta capacidad está definida por las propias necesidades y una serie de condicionantes sociales y de limitaciones legales, como las impuestas por las propias Denominaciones de Origen, o medioambientales, como la limitación del uso de agua. El desarrollo de estrategias que aseguren una utilización sostenible de los recursos hídricos, así como el apoyo de las Administraciones dentro de la nueva Política Agraria Común (PAC) pueden mejorar esta capacidad de adaptación y con ello disminuir la vulnerabilidad. ABSTRACT This paper analyzes the vulnerability of viticulture in Spain on Climate Change in order to improve the adaptive capacity of the wine sector to meet the diverse challenges of globalization. The risks to quality and quantity are explored by considering bioclimatic indices with specific emphasis on the Protected Designation of Origin areas that produce the premium winegrapes. The Indices selected represents risks caused by adverse climatic events related to climate extremes, and requirements of varieties and vintage quality in the case of those used in the Multicriteria Climatic Classification System. (MCCS). To study the climatic conditions, an ensemble of Regional Climate Models (RCMs) of ESCENA project, developed in the framework of the Spanish Plan for Regional Climate Change Scenarios (PNACC-2012) have been used As a key part of the study of vulnerability risks and opportunities are linked to adaptation needs across the Spanish territory. Adaptation efforts are calculated as proportional to the magnitude of change and according to a sensitivity analysis for 56 protected designations of origin. This analysis shows that adaptation efforts should focus on improving conditions in the ripening period to maintain quality in the vineyards of the northern half of Iberian Peninsula, while in areas of the southern half and in the Mediterranean basin, also should seek to maintain productivity of viticulture. Therefore, efforts should be more intense in the Southern and Eastern part, and may also be subject to other limitations, such as irrigation, which could become almost mandatory to keep growing, would face a context of increased competition and lack of resources water. The ability to meet these needs will determine the vulnerability of the vineyard in each region in the future. This capability is defined also by a number of social factors and legal limitations such as environmental regulations, limited water resources or those imposed by their own Designation of Origin. The development of strategies to ensure sustainable use of water resources and the support schemes in the new Common Agricultural Policy (CAP) can improve the resilience and thus reduce vulnerability.