Experimental analysis of the breakage of a liquid bridge under microgravity conditions

The experimental results obtained in experiment “STACO” made on board the Spacelab D-2 are re-visited, with image-analysis tools not then available. The configuration consisted of a liquid bridge between two solid supporting discs. An expected breakage occurred during the experiment. The recorded images are analysed and the measured behaviour compared with the results of a three dimensional model of the liquid dynamics, obtaining a much better fit than with linear models

Choked flow in water/CO2 solutions on air-independent propulsion systems

We develop a simplified model of choked flow in pipes for CO2-water solutions as an important step in the modelling of a whole hydraulic system with the intention of eliminating the carbon dioxide generated in air-independent submarine propulsion. The model is based on an approximate fitting of the homogeneous isentropic solution upstream of a valve (or any other area restriction), for given fluid conditions at the entrance. The relative maximum choking back-pressure is computed as a function of area restriction ratio. Although the procedure is generic for gas solutions, numeric values for the non-dimensional parameters in the analysis are developed only for choking in the case of carbon dioxide solutions up to the pure-water limit.

Ingeniería Forestal y ambiental en medios insulares

Las Islas Canarias a pesar de su reducida extensión y del relativo poco peso específico a nivel mundial, no es ajena a los problemas globales detectados en la conservación de bosques y en la importancia que éstos tienen para obtener beneficios económicos, socioculturales y ambientales. La gestión forestal sostenible es en este sentido esencial para asegurar y compatibilizar los diversos beneficios del bosque. El papel específico de los bosques y su gestión son sin embargo temas aún por conocer en nuestras islas, por lo que el Año Internacional de los Bosques ha representado una oportunidad única para dar a conocer el mundo forestal y acercarlo a nuestra sociedad. El presente libro consta de 25 capítulos donde se ha contemplado la mayoría de los aspectos a tener en cuenta en la planificación y gestión del medio forestal y natural. Desde la historia forestal del archipiélago, hasta el uso y técnicas de manejo de los recursos naturales, incluyendo el agua, la energía en forma de biomasa y la selvicultura.

Modelización tridimensional de una figura por métodos fotogramétricos y escaneado de precisión. Verificación y comparación de resultados.

El objetivo principal de este proyecto es la obtención del modelo tridimensional de la escultura del patrón San Isidoro de la E.T.S.I. Topografía, Geodesia y Cartografía fabricada en yeso con unas dimensiones de 225 mm de largo, 182 mm de ancho y 318 mm de alto. Se realizará mediante dos métodos diferentes: por medios fotogramétricos utilizando correlación,y por métodos de topografía industrial. En la toma de imágenes para la restitución fotogramétrica se utilizó una cámara no métrica, cuya calibración tuvo que ser realizada comparando dos sistemas de coordenadas, el sistema imagen determinado por técnicas fotogramétricas, y el sistema objeto o terreno determinado por técnicas de topografía clásica. De esta forma se obtienen los datos internos de la cámara. La tolerancia establecida a priori para fotogrametría terrestre es de 1 mm, verificando y contrastando los resultados obtenidos con equipos de trazabilidad superior con los que se procede a la extracción del modelo digital por métodos de topografía industrial, mediante escaneado de precisión. El modelo tridimensional obtenido podría ser útil para múltiples tareas, como disponer de documentación geométrica digital de la figura, su estudio para una posible restauración,etc.

The Imaging and Slitless Spectroscopy Instrument for Surveys (ISSIS): expected radiometric performance, operation modes and data handling

ISSIS is the instrument for imaging and slitless spectroscopy on-board WSO-UV. In this article, a detailed comparison between ISSIS expected radiometric performance and other ultraviolet instruments is shown. In addition, we present preliminary information on the performance verification tests and on the foreseen procedures for in-flight operation and data handling.

World Space Observatory-Ultraviolet: ISSIS, the imaging instrument

The Imaging and Slitless Spectroscopy Instrument (ISSIS) will be flown as part of the science instrumentation in the World Space Observatory-Ultraviolet (WSO-UV). ISSIS will be the first UV imager to operate in a high Earth orbit from a 2 m class space telescope. In this contribution, the science driving the ISSIS design and the main characteristics of this instrument are presented.

Minimum volume stability limits for axisymmetric liquid bridges subject to steady axial acceleration

In this paper the influence of an axial microgravity on the minimum volume stability limit of axisymmetric liquid bridges between unequal disks is analyzed both theoretically and experimentally. The results here presented extend the knowledge of the static behaviour of liquid bridges to fluid configurations different from those studied up to now (almost equal disks). Experimental results, obtained by simulating microgravity conditions by the neutral buoyancy technique, are also presented and are shown to be in complete agreement with theoretical ones.

An experimental analysis od the stability and the dynamics of asixymmetric liquid bridges between unequal disks

In this paper experimental results related to both stability an the dynamic of a asiximmetric liquid bridge between unequal disk are presented. Experiments have been performed by using a drop tower facility and the response of the liquid bridge to a sudden change of the acceleration level acting on it has bee obtained.

Minimum volume for a liquid bridge between equal disks

The lower stability limit for axisymmetric floating zones at rest between equal coaxial disks has been experimentally verified for several disk-separation/disk-diameter ratios by using the neutral buoyancy technique. Results show a close agre ment with theory in the case of bridge disruption and a wide scatter in the case of bridge etachment.

Long liquid bridges aboard sounding rockets

Large free liquid volumes, 30 mm in diameter and 80 mm long, anchored to coaxial discs, have been achieved during a sounding-rocket flight. As these flights provide some six minutes of microgravity and the formation of the liquid column takes only a matter of seconds, ample time is left for experimentation. The results of these trials are presented, and the equipment used to obtain them is briefly described.

Hydrostatic instabilities in floating zone cristal growth process

If only Fluid Mechanics aspects are considered, the configuration appearing in the floating zone technique for crystal growth can be modelled as a mass of liquid spanning between two solid rods. Besides, if now the influence of temperature gradients and heat flow are not considered, the simplest fluid model consists of an isothermal liquid mass of constant properties (density and surface tension) held by capillary forces between two solid disks placed a distance L apart: the so called liquid bridge. As it is well known, if both supporting disks were parallel, coaxial and of the same diameter, 2R, the volume of liquid, V, were equal to that of a cylinder of the same L and R (V=KR~L) and no body forces were acting on the liquid column, the fluid configuration (under these conditions of cylindrical shape) will become unstable when the distance between the disks equals the length of the circumference of the supporting disks (L=2KR, the so-called Rayleigh stability limit). One should be aware that the Rayleigh stability limit can be dramatically modified when the geometry differs from the above described cylinder (due to having non-coaxial disks, different diameter disks, liquid volume different from the cylindrical one, etc) or when other external effects like accelerations either axial or lateral are considered. In this paper the stability limits of liquid bridges considering different types of perturbations are reviewed.