Fluid-solid interaction in arteries incorporating the autoregulation concept in boundary conditions

In pre-surgery decisions in hospital emergency cases, fast and reliable results of the solid and fluid mechanics problems are of great interest to clinicians. In the current investigation, an iterative process based on a pressure-type boundary condition is proposed in order to reduce the computational costs of blood flow simulations in arteries, without losing control of the important clinical parameters. The incorporation of cardiovascular autoregulation, together with the well-known impedance boundary condition, forms the basis of the proposed methodology. With autoregulation, the instabilities associated with conventional pressure-type or impedance boundary conditions are avoided without an excessive increase in computational costs. The general behaviour of pulsatile blood flow in arteries, which is important from the clinical point of view, is well reproduced through this new methodology. In addition, the interaction between the blood and the arterial walls occurs via a modified weak coupling, which makes the simulation more stable and computationally efficient. Based on in vitro experiments, the hyperelastic behaviour of the wall is characterised and modelled. The applications and benefits of the proposed pressure-type boundary condition are shown in a model of an idealised aortic arch with and without an ascending aorta dissection, which is a common cardiovascular disorder.

The Threads of Biosystems Engineering

The core concepts, or threads, of Biosystems Engineering (BSEN) are variously understood by those within the discipline, but have never been unequivocally defined due to its early stage of development. This makes communication and teaching difficult compared to other well established engineering subjects. Biosystems Engineering is a field of Engineering which int egrates engineering science and design with applied biological, environmental and agricultural sciences. It represents an evolution of the Agricultural Engineering discipline applied to all living organisms not including biomedical applications. The basic key element for the emerging EU Biosystems Engineering program of studies is to ensure that it offers essential minimum fundamental engine ering knowledge and competences . A core curriculum developed by Erasmus Thematic Networks is used as benchmark for Agr icultural and Biosystems Engineering studies in Europe. The common basis of the core curriculum for the discipline across the Atlantic , including a minimum of competences comprising the Biosystems Engineering core competencies, has been defined by an Atlan tis project , but this needs to be taken further by defining the threads linking courses together. This paper presents a structured approach to define the Threads of BSEN . The definition of the mid-level competences and the associated learning outcomes has been one of the objectives of the Atlantis programme TABE.NET. The mid-level competences and learning outcomes for each of six specializations of BSEN are defined while the domain-specific knowledge to be acquired for each outcome is proposed. Once the proposed definitions are adopted, these threads will be available for global development of the BSEN.

Thermoelectric assessment of laser peening induced effects on a metallic biomedical Ti6Al4V

Laser peening has recently emerged as a useful technique to overcome detrimental effects associated to another well-known surface modification processes such as shot peening or grit blasting used in the biomedical field. It is worth to notice that besides the primary residual stress effect, thermally induced effects might also cause subtle surface and subsurface microstructural changes that might influence corrosion resistance. Moreover, since maximum loads use to occur at the surface, they could also play a critical role in the fatigue strength. In this work, plates of Ti-6Al-4V alloy of 7 mm in thickness were modified by laser peening without using a sacrificial outer layer. Irradiation by a Q-switched Nd-YAG laser (9.4 ns pulse length) working in fundamental harmonic at 2.8 J/pulse and with water as confining medium was used. Laser pulses with a 1.5 mm diameter at an equivalent overlapping density (EOD) of 5000 cm-2 were applied. Attempts to analyze the global induced effects after laser peening were addressed by using the contacting and non-contacting thermoelectric power (TEP) techniques. It was demonstrated that the thermoelectric method is entirely insensitive to surface topography while it is uniquely sensitive to subtle variations in thermoelectric properties, which are associated with the different material effects induced by different surface modification treatments. These results indicate that the stress-dependence of the thermoelectric power in metals produces sufficient contrast to detect and quantitatively characterize regions under compressive residual stress based on their thermoelectric power contrast with respect to the surrounding intact material. However, further research is needed to better separate residual stress effects from secondary material effects, especially in the case of low-conductivity engineering materials like titanium alloys.