An eco-friendly way to fire retardant flexible polyurethane foam: layer-by-layer assembly of fully bio-based substances

The objective of the present study is to develop fully renewable and environmentally benign techniques for improving the fire safety of flexible polyurethane foams (PUFs). A multilayered coating made from cationic chitosan (CS) and anionic alginate (AL) was deposited on PUFs through layer-by-layer assembly. This coating system exhibits a slight influence on the thermal stability of PUF, but significantly improves the char formation during combustion. Cone calorimetry reveals that 10 CS-AL bilayers (only 5.7% of the foams weight) lead to a 66% and 11% reduction in peak heat release rate and total heat release, respectively, compared with those of the uncoated control. The notable decreased fire hazards of PUF are attributed to the CS-AL coatings being beneficial to form an insulating protective layer on the surface of burning materials that inhibits the oxygen and heat permeation and slows down the flammable gases in the vapor phase, and thereby improves the flame resistance. This water-based, environmentally benign natural coating will stimulate further efforts in improving fire safety for a variety of polymer substrates.

Perspectivas del cultivo de sorgo azucarero para bio-etanol en España en base a resultados varietales en ensayos multilocales

La especie Sorghum bicolor (L.) Moench., perteneciente a la familia de las gramíneas (Poaceae), es una planta de origen tropical, sensible al fotoperiodo y a la temperatura, que muestra una alta eficiencia fotosintética en condiciones adecuadas de cultivo.

Uncertainty in optical bio-sensors due to the spectral displacement of the interference modes of the transduction signal. Incertidumbre en bio-sensores ópticos asociada al desplazamiento espectral de los modos de interferencia de la señal de transducción

The analysis of the interference modes has an increasing application, especially in the field of optical biosensors. In this type of sensors, the displacement Δν of the interference modes of the transduction signal is observed when a particular biological agent is placed over the biosensor. In order to measure this displacement, the position of a maximum (or a minimum) of the signal must be detected before and after placing the agent over the sensor. A parameter of great importance for this kind of sensors is the period Pν of the signal, which is inversely proportional to the optical thickness h0 of the sensor in the absence of the biological agent. The increase of this period improves the sensitivity of the sensor but it worsens the detection of the maximum. In this paper, authors analyze the propagation of uncertainties in these sensors when using least squares techniques for the detection of the maxima (or minima) of the signal. Techniques described in supplement 2 of the ISO-GUM Guide are used. The result of the analysis allows a metrological educated answer to the question of which is the optimal period Pν of the signal. El análisis del comportamiento de los modos de interferencia tiene una aplicación cada vez más amplia, especialmente en el campo de los biosensores ópticos. En este tipo de sensores se observa el desplazamiento Δν de los modos de interferencia de la señal de transducción al reconocer un de-terminado agente biológico. Para medir ese desplazamiento se debe detectar la posición de un máximo o mínimo de la señal antes y después de dicho desplazamiento. En este tipo de biosensores un parámetro de gran importancia es el periodo Pν de la señal el cual es inversamente proporcional al espesor óptico h0 del sensor en ausencia de agente biológico. El aumento de dicho periodo mejora la sensibilidad del sensor pero parece dificultar la detección del mínimo o máximo. Por tanto, su efecto sobre la incertidumbre del resultado de la medida presenta dos efectos contrapuestos: la mejora de la sensibilidad frente a la dificultad creciente en la detección del mínimo ó máximo. En este trabajo, los autores analizan la propagación de incertidumbres en estos sensores utilizando herramientas de ajuste por MM.CC. para la detección de los mínimos o máximos de la señal y técnicas de propagación de incertidumbres descritas en el suplemento 2 de la Guía ISO-GUM. El resultado del análisis permite dar una respuesta, justificada desde el punto de vista metrológico, de en que condiciones es conveniente o no aumentar el periodo Pν de la señal.

Bio-climatic Design Handbook: designing public space to reach urban sustainability.

The "Bio-climatic Design Handbook: guidelines for the development of planning regulations" is a tool for urban planning and design professionals planning for the construction of public space taking into account bioclimatic and environmental standards. Based on environmental conditions assessment, urban design guidelines are given. These take into account various scales; from the territory to the microclimatic reality. From these general keys for the design of public space the handbook performs recommendations on specific case studies. The application of bioclimatic techniques in urban design promotes comfort in the public space and the respect for the existing environment, while it influences the energy consumption of buildings that conform this open space. The tool was developed in the context of BIOURB project, where Spain and Portugal cooperate writing this bilingual handbook. The case studies are located in this cross-border region.

A simulation environment for bio-inspired heterogeneous chained modular robots

This paper presents a new simulation environment aimed at heterogeneous chained modular robots. This simulator allows testing the feasibility of the design, checking how modules are going to perform in the field and verifying hardware, electronics and communication designs before the prototype is built, saving time and resources. The paper shows how the simulator is built and how it can be set up to adapt to new designs. It also gives some examples of its use showing different heterogeneous modular robots running in different environments.

Economic impacts of climate change on agrifood markets: A bio-economic approach with a focus on the EU

Projections for world food production and prices play a crucial role to evaluate and tackle future food security challenges. Understanding how these projections will be affected by climate change is the main objective of this study. By means of a bio-economic approach we assess the economic impacts of climate change on agrifood markets, providing both a global analysis and a regionalised evaluation within the EU. To account for uncertainty, we analyse the IPCC emission scenario A1B for the 2030 horizon under several simulation scenarios that differ in (1) the climate projection, from HadleyCM3 (warm) or ECHAM5 (mild) global circulation models; and (2) the influence of CO2 effects. Results of this study indicate that agrifood market projections to 2030 are very sensitive to climate change uncertainties and, in particular to the magnitude of the carbon fertilization effect.

Proposal of a new indicator to define ductility applied to corroded steel reinforcement on concrete structures = Propuesta de un nuevo indicador para definir la ductilidad aplicada a la corrosión del acero de refuerzo en estructuras de hormigón

The carbonation of concrete or the chlorides ingress in such quantity to reach the level of bars is triggers of reinforcement corrosion. One of the most significant effects of reinforcing steel corrosion on reinforced concrete structures is the decline in the ductility-related properties of the steel. Reinforcement ductility has a decisive effect on the overall ductility of reinforced concrete structures. Different Codes classify the type of steel depending on their ductility defined by the minimum values of several parameters. Using indicators of ductility associating different properties can be advantageous on many occasions. It is considered necessary to define the ductility by means of a single parameter that considers strength values and deformation simultaneously. There are a number of criteria for defining steel ductility by a single parameter. The present experimental study addresses the variation in the ductility of concrete-embedded steel bars when exposed to accelerated corrosion. This paper analyzes the suitability of a new indicator of ductility used in corroded bars.

Onomástica, ecología y territorio. La toponimia de La Rioja como indicador biogeográfico y de la dinámica del paisaje forestal

Se presenta un trabajo de investigación toponímica en La Rioja con enfoque geobotánico. La premisa de partida es que la toponimia relacionada con especies y agrupaciones vegetales, productos forestales y usos del suelo proporciona información valiosa sobre la corología y la dinámica de la vegetación al ser clasificada y analizada con criterios biogeográficos y ecológicos. Se ha elegido la región riojana como zona piloto, al concurrir distintos tipos fisonómicos de vegetación y un conjunto muy diverso de comunidades vegetales representativas del paisaje peninsular. Se añade una larga historia de usos agrícolas en la llanura del Ebro que contrasta con la predominante actividad forestal en las zonas montañosas, en particular la potenciación de los pastos para ganadería trashumante. La Rioja tiene carácter de encrucijada no sólo fitocorológica: es también tierra de fronteras políticas y transiciones lingüísticas. En el léxico y la toponimia conviven variantes puras del castellano, rasgos del romance navarro-aragonés, elementos genuinos de una variante medieval riojana, palabras mozárabes y un numeroso y significativo elenco de topónimos de origen vasco. El trabajo se inicia con unas consideraciones epistemológicas. Se establece un planteamiento de la Toponimia como ciencia interdisciplinar, la etiología de los nombres geográficos, así como su valor apelativo descriptor de los atributos del paisaje. Se enumeran los condicionantes metodológicos de la investigación toponímica y se desarrolla una reflexión sobre las particularidades de la toponimia geobotánica. Se dedica un epígrafe a reseñar estudios precedentes de toponimia botánica y ecológica y el estado actual de conocimientos sobre la toponimia de La Rioja. La delimitación superficial de los parajes designados por los nombres geográficos es clave para un análisis orientado a detectar la correspondencia entre los elementos aludidos por el topónimo y las especies y comunidades vegetales. Las áreas de distribución y presencia, así como las transformaciones del paisaje, quedan definidas en superficies acotadas territorialmente. La metodología seguida se basa en la revisión exhaustiva de fuentes toponímicas ya existentes; destacadamente, los datos procedentes de la cartografía del Castro de Rústica, adscritos a polígonos con dimensión espacial. Las denominaciones de las parcelas catastrales se han complementado con los nombres geográficos del Diccionario de Toponimia Actual de La Rioja (DTALR) (González Blanco, 1987), el nomenclátor NomGeo del IGN, y algunas recopilaciones toponímicas municipales. De la base de datos conjunta se han seleccionado los topónimos con significado geobotánico. Se propone una taxonomía de grupos semánticos basada en categorías de estructura (arbolado, matorral, cubiertas herbáceas y áreas de vegetación escasa o rala) y en la adscripción a tipos de vegetación potencialmente dominantes, ordenados según una escala de higrofilia decreciente). También se reseñan topónimos referentes a usos y aprovechamientos en el medio rural: dehesas, ganadería, productos forestales y algunos cultivos agrícolas. El trabajo reúne en un repertorio sistemático los datos toponímicos, acopiados por comarcas y términos municipales. Se incluye la relación de nombres geográficos encontrados por campos nocionales y se comentan los nombres vernáculos que les han dado origen y su etimología. Quedan señalados los topónimos georreferenciados y asignados a entidades superficiales en la cartografía digital catastral, que se ha superpuesto a mapas forestales a escalas 1:200.000 y 1:50.000, en cuya elaboración participamos. El análisis ha permitido definir “topónimo externo” como el recinto catastral en que la especie o agrupación aludida no tiene presencia en la vegetación actual, al menos como dominante. Los topónimos externos más significativos de cada grupo han sido analizados describiendo la cubierta vegetal actual correspondiente, lo que permite interpretar, junto con las características fisiográficas del paraje, las causas posibles de ausencia del elemento aludido, teniendo en cuenta criterios generales de mesología, de dinámica de la vegetación y de la historia de la acción humana. El trabajo se cierra con un capítulo de conclusiones generales, conceptuales y metodológicas, así como una relación de líneas de profundización de la investigación que quedan apuntadas. Se completa con una relación de fuentes y referencias bibliográficas fundamentales. ABSTRACT This paper presents a study of the toponymy of La Rioja with a specific focus on place names reflecting the region’s geobotany. Its underlying premise is that the toponymy associated with plant species and communities, forest products and land uses can provide valuable information about the chorology and vegetation dynamics when classified and analysed using biogeographical and ecological criteria. La Rioja has been chosen for this pilot study because it concentrates vegetation types of distinct physiognomy and a highly diverse set of plant communities that can be considered representative of the vegetation of the peninsula’s landscapes. This combines with a long history of different agricultural uses on the Ebro plain that contrast with the predominance of forestry activity in the more mountainous areas, in particular the promotion of pasture for livestock transhumance. Indeed, La Rioja is not only a crossroads in terms of its phytochorology, but it is also a land of political boundaries and language transitions. Coexisting in its lexicon and toponymy, we find pure Castilian variants, features from the Romance language of Navarro-Aragonese, genuine elements of the medieval variant of the Riojan dialect, words of Mozarabic and a large and significant list of place names of Basque origin. The paper begins by outlining a number of epistemological considerations and establishes an interdisciplinary approach to toponymy, the aetiology of geographical names, and their value in the descriptive naming of the features of a landscape. It continues by enumerating the methodological determinants of toponymic research and reflects on the specific characteristics of geobotanical toponyms. The next section is dedicated to examining previous studies of botanical and ecological place names and providing a state-of-the-art review of the toponymy of La Rioja. Delimiting the sites designated by the geographical names is essential to any analysis designed to detect the correspondence between the elements alluded to by the toponyms and plant species and communities. These areas of distribution and presence, as well as the landscape changes, are defined in terms of spatially delimited surface areas. The methodology adopted involves an exhaustive review of existing toponymic sources; in particular, data obtained from the maps of the Rustic Cadastre, assigned to spatial polygons. The names of these cadastral parcels are complemented by the geographical names taken from the Diccionario de Toponimia Actual de La Rioja (DTALR) (González Blanco, 1987); the gazetteer – NomGeo, published by Spain’s Instituto Geográfico Nacional; and, various municipal list of toponyms. Place names with a geobotanical meaning were then selected from this joint database. The paper proposes a taxonomy of semantic groups based on structural categories (namely wooded areas, brushland, grassy areas and areas of scanty or sparse vegetation) and assignment to the potentially dominant type of vegetation (ordered on a scale of decreasing hygrophilic trends). Place names referring to land uses and practices in rural areas – including, pasture, livestock, forest products and some agricultural crops – are also described. The study produces a systematic list of toponyms ordered by counties and municipalities. The geographical names are organised by notional fields and the vernacular names that have given rise to them and their etymology are discussed. The toponyms are georeferenced and assigned to surface elements on the digital cadastral map, superimposed on forest maps at scales of 1:200,000 and 1:50,000, in the production of which the authors participated. The analysis has allowed us to define “external toponyms” as those cadastral parcels in which the plant species or group alluded to is no longer present in the vegetation, at least as the dominant type. The most significant external toponyms in each group have been analysed by describing the corresponding, present-day vegetation cover, which allows us to interpret, along with the physiographic features of the site, the possible causes of the absence of the aforementioned element, bearing in mind general criteria of mesology, vegetation dynamics and the history of human action. The paper finishes by offering a number of general conceptual and methodological conclusions, and a list of areas that future research can usefully examine. The study is supplemented with a list of sources and key references.

Bio-based polymer nanocomposites based on nylon 11 and WS2 inorganic nanotubes

Tungsten disulphide nanotubes (INT-WS2) have been successfully dispersed in a bio-based polyamide matrix (nylon 11) by conventional melt processing. The effect of INT-WS2 content on the morphology, thermal stability, crystallization behaviour and dynamic mechanical properties is investigated. The results indicate that these inorganic nanotubes can be efficiently incorporated into the bio-based polymer matrix without the need for modifiers or surfactants. Additionally, it is found that the non-isothermal crystallization behaviour of nylon 11/INT-WS2 depends on both the cooling rate and INT-WS2 concentration. In particular, crystallization kinetics results demonstrate that the nucleating activity of INTs plays a dominant role in accelerating the crystallization of nylon 11. This fact leads to the appearance of the more-disordered phase at higher temperature. More significantly, it was shown that these INT-WS2 nanocomposites can facilitate a good processability and cost efficiency, and will be of interest for many eco-friendly and medical applications.