Presentation and discussion of the UAM/exercise I-1b: "Pin-Cell Burn-Up Benchmark" with the hybrid method

The aim of this work is to present the Exercise I-1b “pin-cell burn-up benchmark” proposed in the framework of OECD LWR UAM. Its objective is to address the uncertainty due to the basic nuclear data as well as the impact of processing the nuclear and covariance data in a pin-cell depletion calculation. Four different sensitivity/uncertainty propagation methodologies participate in this benchmark (GRS, NRG, UPM, and SNU&KAERI). The paper describes the main features of the UPM model (hybrid method) compared with other methodologies. The requested output provided by UPM is presented, and it is discussed regarding the results of other methodologies.

Analysis of the operator action and the single failure criteria in a SGTR sequence using best estimate assumptions with TRACE 5.0

Steam Generator Tube Rupture (SGTR) sequences in Pressurized Water Reactors are known to be one of the most demanding transients for the operating crew. SGTR are a special kind of transient as they could lead to radiological releases without core damage or containment failure, as they can constitute a direct path from the reactor coolant system to the environment. The first methodology used to perform the Deterministic Safety Analysis (DSA) of a SGTR did not credit the operator action for the first 30 min of the transient, assuming that the operating crew was able to stop the primary to secondary leakage within that period of time. However, the different real SGTR accident cases happened in the USA and over the world demonstrated that the operators usually take more than 30 min to stop the leakage in actual sequences. Some methodologies were raised to overcome that fact, considering operator actions from the beginning of the transient, as it is done in Probabilistic Safety Analysis. This paper presents the results of comparing different assumptions regarding the single failure criteria and the operator action taken from the most common methodologies included in the different Deterministic Safety Analysis. One single failure criteria that has not been analysed previously in the literature is proposed and analysed in this paper too. The comparison is done with a PWR Westinghouse three loop model in TRACE code (Almaraz NPP) with best estimate assumptions but including deterministic hypothesis such as single failure criteria or loss of offsite power. The behaviour of the reactor is quite diverse depending on the different assumptions made regarding the operator actions. On the other hand, although there are high conservatisms included in the hypothesis, as the single failure criteria, all the results are quite far from the regulatory limits. In addition, some improvements to the Emergency Operating Procedures to minimize the offsite release from the damaged SG in case of a SGTR are outlined taking into account the offsite dose sensitivity results.

A multi-criteria optimization and decision-making approach for improvement of food engineering processes.

The objective of this study was to propose a multi-criteria optimization and decision-making technique to solve food engineering problems. This technique was demostrated using experimental data obtained on osmotic dehydratation of carrot cubes in a sodium chloride solution. The Aggregating Functions Approach, the Adaptive Random Search Algorithm, and the Penalty Functions Approach were used in this study to compute the initial set of non-dominated or Pareto-optimal solutions. Multiple non-linear regression analysis was performed on a set of experimental data in order to obtain particular multi-objective functions (responses), namely water loss, solute gain, rehydration ratio, three different colour criteria of rehydrated product, and sensory evaluation (organoleptic quality). Two multi-criteria decision-making approaches, the Analytic Hierarchy Process (AHP) and the Tabular Method (TM), were used simultaneously to choose the best alternative among the set of non-dominated solutions. The multi-criteria optimization and decision-making technique proposed in this study can facilitate the assessment of criteria weights, giving rise to a fairer, more consistent, and adequate final compromised solution or food process. This technique can be useful to food scientists in research and education, as well as to engineers involved in the improvement of a variety of food engineering processes.

Port planning for the Port of Vigo using port and city integration criteria

Project planning and architectural management of a port area should include many variables, it must be in harmony with its environment and its historical development as the key to successful integration. This article explains the elements which should be taken into account when doing such planning by describing the proposal presented on the ?Concurso public internacional de ideas para proyectar la ordenación urbanística y arquitectónica del área central del puerto de Vigo?, with the aim of sharing comprehensive applied design philosofy, it will inspire and help future designers. Creative imagination is great added value to engineering creations, but should not overwhelm functionality and sustainability, but to be in harmony with them. The maximum aesthetic expression in engineering is achieved as the product of the conceptual elegance of the functionality of the structures.

GRS Results for the Burnup Pin-cell Benchmark Propagation of Cross-Section, Fission Yields and Decay Data Uncertainties

GRS Results for the Burnup Pin-cell Benchmark Propagation of Cross-Section, Fission Yields and Decay Data Uncertainties

Technical criteria for the desing of foundation slabs and perimetral wall in difficult terrain in Madrid. Spain

This paper explains a procedure for the choice of ballast modules used for the design of direct continuous foundation in karst terrain. The presence of dangerous cavities is introduced in this procedure thereby evaluating risk failure. It also provides pertinent guidelines to direct the geotechnical survey of the terrain.

Technical criteria for the design of foundation slabs and perimetral wall in difficult terrain in south east Madrid, Spain

This paper explains a procedure for the choice of ballast modules used for the design of direct continuous foundation in karst terrain. The presence of dangerous cavities is introduced in this procedure thereby evaluating risk failure. It also provides pertinent guidelines to direct the geotechnical survey of the terrain.

Assessment of CTF boiling transition and critical heat flux modeling capabilities using the OECD/NRC BFBT and PSBT benchmark databases

Over the last few years, the Pennsylvania State University (PSU) under the sponsorship of the US Nuclear Regulatory Commission (NRC) has prepared, organized, conducted, and summarized two international benchmarks based on the NUPEC data—the OECD/NRC Full-Size Fine-Mesh Bundle Test (BFBT) Benchmark and the OECD/NRC PWR Sub-Channel and Bundle Test (PSBT) Benchmark. The benchmarks’ activities have been conducted in cooperation with the Nuclear Energy Agency/Organization for Economic Co-operation and Development (NEA/OECD) and the Japan Nuclear Energy Safety (JNES) Organization. This paper presents an application of the joint Penn State University/Technical University of Madrid (UPM) version of the well-known sub-channel code COBRA-TF (Coolant Boiling in Rod Array-Two Fluid), namely, CTF, to the steady state critical power and departure from nucleate boiling (DNB) exercises of the OECD/NRC BFBT and PSBT benchmarks. The goal is two-fold: firstly, to assess these models and to examine their strengths and weaknesses; and secondly, to identify the areas for improvement.

Impedance-based stability and transient-performance assessment applying maximum peak criteria

The impedance-based stability-assessment method has turned out to be a very effective tool and its usage is rapidly growing in different applications ranging from the conventional interconnected dc/dc systems to the grid-connected renewable energy systems. The results are sometime given as a certain forbidden region in the complex plane out of which the impedance ratio--known as minor-loop gain--shall stay for ensuring robust stability. This letter discusses the circle-like forbidden region occupying minimum area in the complex plane, defined by applying maximum peak criteria, which is well-known theory in control engineering. The investigation shows that the circle-like forbidden region will ensure robust stability only if the impedance-based minor-loop gain is determined at the very input or output of each subsystem within the interconnected system. Experimental evidence is provided based on a small-scale dc/dc distributed system.

Study for the rehabilitation of vernacular architecture with sustainable criteria

This paper assesses rural vernacular heritage established in a warm temperate climate, with dry, hot summer, in São Vicente e Ventosa (SVV), Alentejo, Portugal, and takes part in a larger investigation intending to create rehabilitation guidelines, with sustainable criteria and integration of recent technologies, to improving indoor comfort, and revert the state of deterioration. To further reach this aim, this paper proposes a four phases methodology: data collection, evaluation, simulation and development; a first survey data analysis, including climate data and the adapted comfort climograph and isopleth diagram, allows an understanding of thermal comfort and main constraints in site, as well as suitable bioclimatic strategies for SVV: high thermal inertia for tempering extreme summer conditions and the considerable temperature amplitudes throughout the year, complementarily night ventilation for passive cooling, small-sized window openings and movable shading systems for solar radiation protection. An efficient behaviour in stabilizing indoor temperature swings is revealed.

Naturaleza, ética, y arquitectura: Autenticidad y criterios éticos que integran el desarrollo de una arquitectura más sostenible = Nature, ethics and architecture: Authenticity and ethics criteria that integrate the development of a more sustainable architecture

La ecología no solamente ha puesto de manifiesto problemas ambientales, sino que ha confirmado la necesidad de una nueva armonía entre los propios seres humanos y de éstos con la naturaleza y con todos los seres que la habitan. Es necesario un nuevo contrato que determine nuestras relaciones con la Naturaleza (Serrs1), y una nueva Ética para nuestras vidas (Guattari2). La ética medioambiental nos ha dado una visión universal y supra-generacional de la gestión de la naturaleza y como consecuencia, una nueva forma de construir nuestra ‘segunda’ Naturaleza, que es la arquitectura. ¿Qué es lo esencial que esta nueva ética exige para la arquitectura? Este es un momento crucial para reconsiderar los objetivos de la arquitectura, porque lo ‘eco’ está produciendo grandes cambios. ¿Implica esta era post-ecológica una particular ética, es decir, referida a sus fines y medios? ¿Porqué, para qué, para quién, cómo debemos hacer la arquitectura de nuestro tiempo? Es momento de afrontar críticamente el discurso de la eco-arquitectura, e incluso de repensar los propios límites de la arquitectura. El desarrollo actual del conocimiento medioambiental es esencialmente técnico y utilitario, pero ¿es el reto solamente técnico?¿Es suficiente la suma de lo medioambiental-social-económico-cultural para definirla? ¿Hay claves que nos puedan dar la dimensión ética de esta aproximación técnica-empírica? ¿Sabemos lo que estamos haciendo cuando aplicamos este conocimiento? Y, sobre todo, ¿cuál es el sentido de lo que estamos haciendo? La tesis que se propone puede resumirse: De acuerdo con el actual conocimiento que tenemos de la Naturaleza, la Arquitectura de nuestro tiempo deber reconsiderar sus fines y medios, puesto que la ética medioambiental está definiendo nuevos objetivos. Para fundamentar y profundizar en esta afirmación la tesis analiza cómo son hoy día las relaciones entre Ética-Naturaleza-Arquitectura (Fig.1), lo que facilitará las claves de cuáles son los criterios éticos (en cuanto a fines y medios) que deben definir la arquitectura del tiempo de la ecología. ABSTRACT Ecology shows us not only environmental problems; it shows that we need a new balance and harmony between individuals, beings, communities and Nature. We need a new contract with Nature according to Serres576, and a new Ethics for our lives according to Guattari577. Environmental ethics have given us a universal and supra-generational vision of the management of our Nature and, as a consequence, a new way to construct our ‘second’ nature, which is architecture. What is essential for this new architecture that the new ethics demand? This is a critical moment to reconsider the object of architecture, because the ‘eco’ is making significant changes in it. Are there any specifically ethical concerns (ends and means) in the post-ecological era? Why, for what, for whom, how should we make architecture in our times? This is the time to approach the eco-architectural discourse critically and to question the current boundaries of architecture itself: Where is eco-architecture going? The current development of environmental knowledge is essentially technical and utilitarian, but it is its technical aspect the only challenge? Is the sum of environmental-social-economic aspects enough to define it? Are there any clues which can give an ethical sense to this technical-empirical approach? Do we know what we are doing when we apply this knowledge? And overall, what is the meaning of what we are doing? Exploring this subject, this thesis makes a statement: In accordance with the actual knowledge of Nature, Architecture of our time must reconsider its ends and means, since the environmental ethics is defining new objectives. To support that, the thesis analyzes what the relationships between Ethics –Nature- Architecture (Fig. 53) are like nowadays, this will provide the clues of which ethical criteria (ends and means) must architecture of an ecological era define.

Selected papers from OECD-NEA PSBT benchmark

Historically, the prediction of safety margins has been based on system level thermal-hydraulic calculations employing suitable empirical formulations for assembly specific geometries and fuel-element grid spacers. These works have assessed response, margins, and consequences for the system based on one-dimensional two-fluid or drift-flux type thermalhydraulics formulations with fuel-vendor specific hydraulic losses and heat transfer characteristics for various fuel assemblies, including the so-called hot channel. Analysis of the hot channel gives important information on flow rates, fuel element centerline temperature, fuel sheath temperature, and margin to the departure from nucleate boiling. Given the reliance of the above approaches on empirical formulations obtained from complex and often difficult experiments, there is significant interest in obtaining reliable and accurate results from computation tools which employ more fundamental empirical relationships which can be obtained from subsets of the domain or from other scaled experiments.

La pedagogía del criterio desobediente/Pedagogy of Disobedient Criteria

Artículo de crítica de la arquitectura y la aplicación de ésta a la docencia de proyectos arquitectónicos.

Analytical bearing capacity of strip footing in weightless materials with power-law failure criteria

Sokolovskii’s method of characteristics is extended to provide analytical solutions for the ultimate load at the moment of plastic failure under plane-strain conditions of shallow strip foundations on weightless rigid-plastic media with a noncohesive power-law failure envelope. The formulation is made parametrically in terms of the instantaneous friction angle, and the key idea to obtain the bearing capacity is that information can be transmitted from the free surface (where external loads are known) to the contact plane of the foundation. The methodology can consider foundations adjacent to a slope, external surcharges at the free surface, and inclined loads (both on the slope and on the foundation). Sensitivity analyses illustrate the influence on bearing capacity of changes in the different geometrical parameters involved. An application example is presented and design plots are provided, and model predictions are compared with results of bearing capacity tests under low gravity.

Discrete Multi-Criteria Methods for lands use and conservation planning on La Colacha in Arroyos Menores (Río Cuarto, Province of Córdoba, Argentina)

The study area is La Colacha sub-basins from Arroyos Menores basins, natural areas at West and South of Río Cuarto in Province of Córdoba of Argentina, fertile with loess soils and monsoon temperate climate, but with soil erosions including regressive gullies that degrade them progressively. Cultivated gently since some hundred sixty years, coordinated action planning became necessary to conserve lands while keeping good agro-production. The authors had improved data on soils and on hydrology for the study area, evaluated systems of soil uses and actions to be recommended and applied Decision Support Systems (DSS) tools for that, and were conducted to use discrete multi-criteria models (MCDM) for the more global views about soil conservation and hydraulic management actions and about main types of use of soils. For that they used weighted PROMETHEE, ELECTRE, and AHP methods with a system of criteria grouped as environmental, economic and social, and criteria from their data on effects of criteria. The alternatives resulting offer indication for planning depending somehow on sub basins and on selections of weights, but actions for conservation of soils and water management measures are recommended to conserve the basins conditions, actually sensibly degrading, mainly keeping actual uses of the lands.