New selective earth faults only current directional method for isolated neutral systems

In order to achieve total selectivity at electrical distribution networks it is of great importance to analyze the defect currents at ungrounded power systems. This information will help to grant selectivity at electrical distribution networks ensuring that only the defect line or feeder is removed from service. In the present work a new selective and directional protection method for ungrounded power systems is evaluated. The new method measures only defect currents to detect earth faults and works with a directional criterion to determine the line under faulty conditions. The main contribution of this new technique is that it can detect earth faults in outgoing lines at any type of substation avoiding the possible mismatch of traditional directional earth fault relays. This detection technique is based on the comparison of the direction of a reference current to the direction of all earth fault capacitive currents at all the feeders connected to the same bus bars. This new method has been validated through computer simulations. The results for the different cases studied are remarkable, proving total validity and usefulness of the new method.

High-efficiency voltage regulator and stabilizer for outdoor lighting installations

This paper presents a high performance system of regulation and stabilization of luminous flux for public street lighting installations. Its purpose is to reduce the luminous flux of the luminaries efficiently by reducing their voltage supply, resulting in the improvement of energy efficiency in the installation. The system is basically composed of electromagnetic components which provide robustness and high-performance to the device, as well as minimum maintenance requirements. However, the voltage regulation is based on the application of voltage steps. Aging studies of the luminaries have been carried out to analyze the impact of this discrete voltage regulation. A specific prototype of this voltage and stabilizer regulator have been in operation in a real outdoor lighting installation for more than one year.

Análisis del funcionamiento de un generador de Silicio Cristalino de 7kW tras 16 años de operación en Madrid

Este artículo presenta la degradación observada en un generador de x-Si 7 kW de potencia tras 16 años de exposición en la terraza del Instituto de Energía Solar de la Universidad Politécnica de Madrid. La caída de la potencia pico ha sido del 9% durante dicho periodo o, lo que es equivalente, una degradación anual del 0,56%; mientras que la desviación típica se ha mantenido básicamente constante. Los principales defectos visuales observados han sido delaminaciones en la superficie PET/PVF de la cara posterior de los módulos y roturas en las cajas de conexión y en la unión entre marco y vidrio. Todos los módulos analizados han pasado con suficiencia las pruebas de aislamiento eléctrico dispuestas en la norma IEC 61215, tanto en seco como en mojado.

Alternativas de ensayo de potencia sobre grandes generadores fotovoltaicos

Este artículo presenta diferentes alternativas de ensayo para caracterizar en campo grandes generadores fotovoltaicos. Las medidas de curvas I-V con trazadores electrónicos, previa desconexión de la planta, son rápidas y permiten detectar anomalías del generador fotovoltaico como puntos calientes, polarización y sombreados. Sin embargo, la medida de potencia correspondiente engloba demasiada incertidumbre como para ser tomada en cuenta contractualmente. Las medidas de potencia continua usando un vatímetro, tomadas de manera simultánea al funcionamiento normal de la planta, proporcionan mayor precisiónen los resultados, especialmente si se siguen algunas precauciones para disminuir la incertidumbre. Los resultados presentados proceden de los ensayos efectuados en unas 50 centrales fotovoltaicas comerciales, representativas de una potencia cercana a 250 MW.

Fiabilidad y costes de mantenimiento en un programa de electrificación rural de 13.000 solar home systems

La electrificación rural fotovoltaica ha experimentado últimamente un salto de escala tanto en la dimensión de sus programas como en sus sistemas de gestión. Garantizar la calidad técnica ya no se reduce solamente a la fase de diseño e instalación, sino también a la de operación y mantenimiento. El presente trabajo trata de caracterizar la fase de operación del programa de electrificación rural fotovoltaico de Marruecos sobre el cual se ha llevado a cabo un exhaustivo estudio de fiabilidad de los distintos componentes que integran los sistemas solares (SHS), así como una evaluación de los costes unitarios ligados al mantenimiento, analizando su impacto en la estructura general de costes del programa. Los resultados van dirigidos hacia la caracterización de un modelo de la estructura de mantenimiento que logre asegurar la sostenibilidad de este tipo de programas.

Detección automática de fallos de operación en instalaciones fotovoltaicas domésticas

El objetivo principal de este trabajo es implementar una herramienta de análisis automático de datos de operación para detectar fallos en instalaciones fotovoltaicas domésticas que disponen de sistemas de monitorización. Para ello se han analizado los datos de productividad de 10.650 sistemas fotovoltaicos (9657 situados en Francia y 993 en Bélgica). El Performance Ratio (PR) promedio ha sido de 76% en Francia y 78% en Bélgica, y el Performance Index (PI) promedio es de 85% en ambos países. La potencia real media de los módulos fotovoltaicos es un 4,9% inferior a su valor nominal anunciado en la ficha técnica del fabricante. Los módulos de heterounión (HIT) muestran productividades superiores a la media, mientras que los módulos de Cobre-Indio-Selenio (CIS) muestran una potencia real un 16% inferior a su valor nominal.

Electrical Power Fluctuations in a Network of DC/AC inverters in a Large PV Plant: relationship between correlation, distance and time scale

This paper analyzes the correlation between the fluctuations of the electrical power generated by the ensemble of 70 DC/AC inverters from a 45.6 MW PV plant. The use of real electrical power time series from a large collection of photovoltaic inverters of a same plant is an impor- tant contribution in the context of models built upon simplified assumptions to overcome the absence of such data. This data set is divided into three different fluctuation categories with a clustering proce- dure which performs correctly with the clearness index and the wavelet variances. Afterwards, the time dependent correlation between the electrical power time series of the inverters is esti- mated with the wavelet transform. The wavelet correlation depends on the distance between the inverters, the wavelet time scales and the daily fluctuation level. Correlation values for time scales below one minute are low without dependence on the daily fluctuation level. For time scales above 20 minutes, positive high correlation values are obtained, and the decay rate with the distance depends on the daily fluctuation level. At intermediate time scales the correlation depends strongly on the daily fluctuation level. The proposed methods have been implemented using free software. Source code is available as supplementary material.

Energy payback time of grid connected pv systems: comparison between tracking and fixed systems

A review of existing studies about LCA of PV systems has been carried out. The data from this review have been completed with our own figures in order to calculate the Energy Payback Time of double and horizontal axis tracking and fixed systems. The results of this metric span from 2 to 5 years for the latitude and global irradiation ranges of the geographical area comprised between −10◦ to 10◦ of longitude, and 30◦ to 45◦ of latitude. With the caution due to the uncertainty of the sources of information, these results mean that a GCPVS is able to produce back the energy required for its existence from 6 to 15 times during a life cycle of 30 years. When comparing tracking and fixed systems, the great importance of the PV generator makes advisable to dedicate more energy to some components of the system in order to increase the productivity and to obtain a higher performance of the component with the highest energy requirement. Both double axis and horizontal axis trackers follow this way, requiring more energy in metallic structure, foundations and wiring, but this higher contribution is widely compensated by the improved productivity of the system.

On the complexity of radiation models for PV energy production calculation

Several authors have analysed the changes of the probability density function of the solar radiation with different time resolutions. Some others have approached to study the significance of these changes when produced energy calculations are attempted. We have undertaken different transformations to four Spanish databases in order to clarify the interrelationship between radiation models and produced energy estimations. Our contribution is straightforward: the complexity of a solar radiation model needed for yearly energy calculations, is very low. Twelve values of monthly mean of solar radiation are enough to estimate energy with errors below 3%. Time resolutions better than hourly samples do not improve significantly the result of energy estimations.

On the calculation of energy produced by a PV grid-connected system

This study develops a proposal of method of calculation useful to estimate the energy produced by a PV grid-connected system making use of irradiance-domain integrals and denition of statistical moment. Validation against database of real PV plants performance data shows that acceptable energy estimation can be obtained with rst to fourth statistical moments and some basic system parameters. This way, only simple calculations at the reach of pocket calculators, are enough to estimate AC energy.

solaR: Solar Radiation and Photovoltaic Systems with R

The solaR package allows for reproducible research both for photovoltaics (PV) systems performance and solar radiation. It includes a set of classes, methods and functions to calculate the sun geometry and the solar radiation incident on a photovoltaic generator and to simulate the performance of several applications of the photovoltaic energy. This package performs the whole calculation procedure from both daily and intradaily global horizontal irradiation to the final productivity of grid-connected PV systems and water pumping PV systems. It is designed using a set of S4 classes whose core is a group of slots with multivariate time series. The classes share a variety of methods to access the information and several visualization methods. In addition, the package provides a tool for the visual statistical analysis of the performance of a large PV plant composed of several systems. Although solaR is primarily designed for time series associated to a location defined by its latitude/longitude values and the temperature and irradiation conditions, it can be easily combined with spatial packages for space-time analysis.

Thermal effects and other interesting issues with CPV lenses

The Photovoltaic (PV) Module Reliability Workshop was held in Golden, Colorado, on Feb. 28?March 1, 2012. The objective was to share information to improve PV module reliability because such improvements reduce the cost of solar electricity and give investors confidence in the technology. NREL led the workshop, which was sponsored by the U.S. Department of Energy (DOE) Solar Energy Technologies Program (Solar Program).

Flow and wakes in large wind farms in complex terrain and offshore

Power losses due to wind turbine wakes are of the order of 10 and 20% of total power output in large wind farms. The focus of this research carried out within the EC funded UPWIND project is wind speed and turbulence modelling for large wind farms/wind turbines in complex terrain and offshore in order to optimise wind farm layouts to reduce wake losses and loads.

Flow and wakes in complex terrain and offshore. Model development and verification in UPWIND

The paper presents research conducted in the Flow workpackage of the EU funded UPWIND project which focuses on improving models for flow within and downwind of large wind farms in complex terrain and offshore. The main activity is modelling the behaviour of wind turbine wakes in order to improve power output predictions.

Sensitivity analysis on turbulence models for the ABL in complex terrain

Análisis de sensibilidad de modelos de turbulencia para un modelo CFD de viento aplicados a un emplazamiento en terreno complejo. Validación con datos de viento y turbulencia registrados a 3 alturas en 3 torres de medida.