Integral solution for Web conferencing event management

Nowadays video and web conferencing systems have become effective tools for communication and collaboration inside organizations. However, although these systems have evolved and now provide very nice features (e.g. sharing multimedia and documents), they are still too focused on the moment the meeting takes place. The existing systems provide very few facilities to organize the meeting and they do not take advantage of the possibilities the generated content offers once the meeting is finished. In this paper, we analyze the life cycle of a web conference and how existing systems monitor these conferences. Finally we present our solution, based on our know-how in videoconference management and our experience with these existing systems.

OER Development and Promotion. Outcomes of an International Research Project on the OpenCourseWare Model

In this paper, we describe the successful results of an international research project focused on the use of Web technology in the educational context. The article explains how this international project, funded by public organizations and developed over the last two academic years, focuses on the area of open educational resources (OER) and particularly the educational content of the OpenCourseWare (OCW) model. This initiative has been developed by a research group composed of researchers from three countries. The project was enabled by the Universidad Politécnica de Madrid OCW Office�s leadership of the Consortium of Latin American Universities and the distance education know-how of the Universidad Técnica Particular de Loja (UTPL, Ecuador). We give a full account of the project, methodology, main outcomes and validation. The project results have further consolidated the group, and increased the maturity of group members and networking with other groups in the area. The group is now participating in other research projects that continue the lines developed here

LiDAR simulation in modelled orchards to optimise the use of terretrial laser scanners and derived vegetative measures

Light detection and ranging (LiDAR) technology is beginning to have an impact on agriculture. Canopy volume and/or fruit tree leaf area can be estimated using terrestrial laser sensors based on this technology. However, the use of these devices may have different options depending on the resolution and scanning mode. As a consequence, data accuracy and LiDAR derived parameters are affected by sensor configuration, and may vary according to vegetative characteristics of tree crops. Given this scenario, users and suppliers of these devices need to know how to use the sensor in each case. This paper presents a computer program to determine the best configuration, allowing simulation and evaluation of different LiDAR configurations in various tree structures (or training systems). The ultimate goal is to optimise the use of laser scanners in field operations. The software presented generates a virtual orchard, and then allows the scanning simulation with a laser sensor. Trees are created using a hidden Markov tree (HMT) model. Varying the foliar structure of the orchard the LiDAR simulation was applied to twenty different artificially created orchards with or without leaves from two positions (lateral and zenith). To validate the laser sensor configuration, leaf surface of simulated trees was compared with the parameters obtained by LiDAR measurements: the impacted leaf area, the impacted total area (leaves and wood), and th impacted area in the three outer layers of leaves.

Análisis del comportamiento en servicio de los puentes de fábrica ante las nuevas condiciones de explotación

Los puentes arco de fábrica representan una parte importante del inventario de puentes en España y en Europa. De aquí, la importancia cuantitativa de estas estructuras y el interés que representa tanto para las Administraciones, organismos públicos y privados como para la sociedad en general, mantener estos puentes en servicio. Para poder alargar su vida útil, aún más si cabe, se plantea imprescindible llevar a cabo una labor de conservación y mantenimiento adecuada. La importancia de la evaluación estructural de los puentes de fábrica se basa en la conveniencia de conocer el comportamiento estructural tanto en condiciones de servicio como en agotamiento. El comportamiento en Estado Límite Último ha sido estudiado en profundidad y como resultado, la seguridad frente a agotamiento ha quedado definida con cierta confianza. Sin embargo, el comportamiento en Estado Límite de Servicio no es tan conocido. Se considera necesaria una revisión del concepto de ELS en puentes arco de fábrica puesto que muchos de ellos, cumpliendo las comprobaciones establecidas para ELU, presentan daños asociados a las actuales condiciones de explotación existentes actuales. El presente trabajo se enmarca dentro de un proyecto que está llevando a cabo la UIC (Union Internationale de Chemins de Fer) desde 2004. El objetivo general del mismo es conocer el comportamiento de los puentes arco de fábrica y mejorar los métodos de evaluación, mantenimiento y reparación existentes. Con este estudio, se pretende contribuir a mejorar la caracterización del comportamiento en servicio de estas estructuras. Para ello se ha realizado un análisis del estado tensional de la bóveda y el relleno estudiando la influencia de la configuración geométrica de los puentes y las propiedades de los materiales que los componen. Entender el funcionamiento de estas estructuras y conocer sus peculiares características ha sido el paso previo al desarrollo del estudio. Para ello, se ha acudido al minucioso trabajo desarrollado por diversos autores, desde los primeros análisis mediante la línea de presiones hasta los actuales métodos basados en elementos finitos. En primer lugar, se ha realizado un estudio paramétrico de diferentes configuraciones geométricas. El objetivo es comprobar la influencia de las dimensiones absolutas y las relaciones existentes entre las mismas en el comportamiento en servicio de los puentes. A continuación, se ha estudiado la influencia de las propiedades mecánicas de los rellenos rígido y granular (modificando su módulo de deformabilidad) en el estado tensional de la bóveda y el propio relleno. Para las dos etapas anteriores se emplea un modelo simplificado de puente arco de fábrica. A continuación, se crea un modelo más completo del mismo, para estudiar la influencia de las propiedades mecánicas del substrato de cimentación en el comportamiento estructural en servicio de la estructura. El objetivo final de este trabajo fin de máster, es conocer el comportamiento en servicio de los puentes arco de fábrica, para poder establecer las variables que condicionan el mismo. El siguiente paso en este campo de estudio, consiste en fijar unos valores límite para las mismas. Como síntesis de las conclusiones obtenidas, se menciona que el comportamiento estructural de los puente arco de fábrica, en mayor o menor medida, está influenciado por su geometría y las propiedades de los rellenos y substrato de cimentación que forman parte del mismo. Masonry arch bridges represent an important part of the total bridges, both in Spain and Europe. For this reason, these structures are so important in terms of quantity. They play an essential role for public administration and people in general. In order to remain those bridges serviceable, suitable inspections and repairs are required. It is necessary to have knowledge of the bridge condition so that an assessment can be made with confidence. It is therefore necessary to check that bridges behave properly under Ultimate Limit State criterion and Serviceability Limit State criterion. ULS has been studied thoroughly and as result, requirements under collapse are well described. However, structural behaviour under conditions of serviceability is not well evaluated. Serviceability Limit State criterion should be redefined for masonry arch bridges assessment. This is because many bridges that fulfil SLS criterion have damages. The purpose of this work is to take part in the improvement of assessment under serviceability. A vault and fill structural behaviour analysis has been performed from two points of view: geometry of the bridge and materials’ properties. The starting point was learning about masonry arch bridges behaviour and their special features. For this task, a revision of several authors’ thorough study has been made, from the line of thrust analysis to the current finite element analysis. Firstly, a parametric study of typologies of bridge has been made. The aim is to know how vault and fill behaviour changes modifying both absolute dimensions and relation between them. In the next step, a study of both surface fill and backfill properties has been done. The aim is to know how vault and fill behaviour changes modifying Young’s modulus. The principal conclusion achieved along this work is that the structural behaviour of masonry bridges depends of the bridge geometry and its material properties.

TRHIOS: Trust and reputation in hierarchical and quality-oriented societies

In this paper we present TRHIOS: a Trust and Reputation system for HIerarchical and quality-Oriented Societies. We focus our work on hierarchical medical organizations. The model estimates the reputation of an individual, RTRHIOS, taking into account information from three trust dimensions: the hierarchy of the system; the source of information; and the quality of the results. Besides the concrete reputation value, it is important to know how reliable that value is; for each of the three dimensions we calculate the reliability of the assessed reputations; and aggregating them, the reliability of the reputation of an individual. The modular approach followed in the definition of the different types of reputations provides the system with a high flexibility that allows adapting the model to the peculiarities of each society.

On track for solar grade silicon through a siemens process-type laboratory reactor: operating conditions and energy savings

Polysilicon cost impacts significantly on the photovoltaics (PV) cost and on the energy payback time. Nowadays, the besetting production process is the so called Siemens process, polysilicon deposition by chemical vapor deposition (CVD) from Trichlorosilane. Polysilicon purification level for PV is to a certain extent less demanding that for microelectronics. At the Instituto de Energía Solar (IES) research on this subject is performed through a Siemens process-type laboratory reactor. Through the laboratory CVD prototype at the IES laboratories, valuable information about the phenomena involved in the polysilicon deposition process and the operating conditions is obtained. Polysilicon deposition by CVD is a complex process due to the big number of parameters involved. A study on the influence of temperature and inlet gas mixture composition on the polysilicon deposition growth rate, based on experimental experience, is shown. Moreover, CVD process accounts for the largest contribution to the energy consumption of the polysilicon production. In addition, radiation phenomenon is the major responsible for low energetic efficiency of the whole process. This work presents a model of radiation heat loss, and the theoretical calculations are confirmed experimentally through a prototype reactor at our disposal, yielding a valuable know-how for energy consumption reduction at industrial Siemens reactors.

Metamodelo para la definición, implantación y mejora de los procesos de gestión de proyectos

En los últimos años hemos sido testigos de la creciente demanda de software para resolver problemas cada vez más complejos y de mayor valor agregado. Bajo estas circunstancias, nos podemos hacer la siguiente pregunta: ¿Está preparada la industria de software para entregar el software que se necesita en los próximos años, de acuerdo con las demandas del cliente? Hoy en día, muchos expertos creen que el éxito de esta industria dependerá de su capacidad para gestionar los proyectos, las personas y los recursos. En este sentido, la gestión de proyectos es un factor clave para el éxito de los proyectos software en todo el mundo. Además, considerando que las Pequeñas y Medianas Empresas de software (PYMEs) representan el 99,87% de las empresas españolas, es vital para este tipo de empresas la implementación de los procesos involucrados con la gestión de proyectos. Es cierto que existen muchos modelos que mejoran la eficacia de la gestión de proyectos, pero la mayoría de ellos se centra únicamente en dos procesos: la planificación del proyecto y la monitorización y control del proyecto, ninguno de los cuales a menudo es asequible para las PYMEs. Estos modelos se basan en el consenso de un grupo de trabajo designado para establecer cómo debe ser gestionado el proceso software. Los modelos son bastante útiles ya que proporcionan lineamientos generales sobre dónde empezar a mejorar la gestión de los proyectos, y en qué orden, a personas que no saben cómo hacerlo. Sin embargo, como se ha dicho anteriormente, la mayoría de estos modelos solamente funcionan en escenarios dentro de las grandes empresas. Por lo tanto, es necesario adaptar los modelos y herramientas para el contexto de PYMEs. Esta tesis doctoral presenta una solución complementaria basada en la aplicación de un metamodelo. Este metamodelo es creado para mejorar la calidad de los procesos de la gestión de proyectos a través de la incorporación de prácticas eficaces identificadas a través del análisis y estudio de los modelos y normas existentes relacionadas con la gestión de proyectos. viii ProMEP – Metamodelo para la gestión de proyectos Por lo tanto, el metamodelo PROMEP (Gestión de Proyectos basada en Prácticas Efectivas) permitirá establecer un proceso estándar de gestión de proyectos que puede adaptarse a los proyectos de cada empresa a través de dos pasos: En primer lugar, para obtener una fotografía instantánea (o base) de los procesos de gestión de proyectos de las PYMEs se creó un cuestionario de dos fases para identificar tanto las prácticas realizadas y como las no realizadas. El cuestionario propuesto se basa en el Modelo de Madurez y Capacidad Integrado para el Desarrollo v1.2 (CMMI-DEV v1.2). Como resultado adicional, se espera que la aplicación de este cuestionario ayude a las PYMEs a identificar aquellas prácticas que se llevan a cabo, pero no son documentadas, aquellas que necesitan más atención, y aquellas que no se realizan debido a la mala gestión o al desconocimiento. En segundo lugar, para apoyar fácilmente y eficazmente las tareas de gestión de proyectos software del metamodelo PROMEP, se diseñó una biblioteca de activos de proceso (PAL) para apoyar la definición de los procesos de gestión de proyectos y realizar una gestión cuantitativa de cada proyecto de las PYMEs. Ambos pasos se han implementado como una herramienta computacional que apoya nuestro enfoque de metamodelo. En concreto, la presente investigación propone la construcción del metamodelo PROMEP para aquellas PYMEs que desarrollan productos software de tal forma que les permita planificar, monitorizar y controlar sus proyectos software, identificar los riesgos y tomar las medidas correctivas necesarias, establecer y mantener un conjunto de activos de proceso, definir un mecanismo cuantitativo para predecir el rendimiento de los procesos, y obtener información de mejora. Por lo tanto, nuestro estudio sugiere un metamodelo alternativo para lograr mayores niveles de rendimiento en los entornos de PYMEs. Así, el objetivo principal de esta tesis es ayudar a reducir los excesos de trabajo y el tiempo de entrega, y aumentar así la calidad del software producido en este tipo de organizaciones. Abstract In recent years we have been witnessing the increasing demand for software to solve more and more complex tasks and greater added value. Under these circumstances, we can ourselves the following question: Is the software industry prepared to deliver the software that is needed in the coming years, according to client demands? Nowadays, many experts believe that the industry’ success will depend on its capacity to manage the projects, people and resources. In this sense, project management is a key factor for software project success around the world. Moreover, taking into account that small and medium-sized software enterprises (SMSe) are the 99.87% of the Spanish enterprises, it is vital for this type of enterprises to implement the processes involved in project management. It is true that there are many models that improve the project management effectiveness, but most of them are focused only on two processes: project planning and project monitoring and control, neither of which is affordable for SMSe. Such models are based on the consensus of a designated working group on how software process should be managed. They are very useful in that they provide general guidelines on where to start improving the project management, and in which order, to people who do not know how to do it. However, as we said, the majority of these models have only worked in scenarios within large companies. So, it is necessary to adapt these models and tools to the context of SMSe. A complementary solution based on the implementation of a metamodel is presented in this thesis. This metamodel is created to improve the quality of project management processes through the incorporation of effective practices identified through the analysis and study of relevant models and standards related to project management. Thus, the PROMEP (PROject Management based on Effective Practices) metamodel will allow establishing a project management standard process to be tailored to each enterprise’s project through two steps: Firstly, to obtain a baseline snapshot of project management processes in SMSe a two-phase questionnaire was created to identify both performed and nonperformed practices. The x ProMEP – Metamodelo para la gestión de proyectos proposed questionnaire is based on Capability Maturity Model Integration for Development v1.2. As additional result, it is expected that the application of the questionnaire to the processes will help SMSe to identify those practices which are performed but not documented, which practices need more attention, and which are not implemented due to bad management or unawareness. Secondly, to easily an effectively support the software project management tasks in the PROMEP metamodel, a Process Asset Library (PAL) is designed to support the definition of project management processes and to achieve quantitative project management in SMSe. Both steps have been implemented as a computational tool that supports our metamodel approach. Concretely, the present research proposes the accomplishment of the PROMEP metamodel for those SMSe which develop software products and enable them to plan, supervise and control their software projects, identify risks and take corrective actions, establish and maintain a set of process assets, define quantitative models that predict the process performance, and provide improvement information. So, our study suggests an alternative metamodel to achieve higher performance levels in the SMSe environments. The main objective of this thesis is help to reduce software overruns and delivery time, and increase software quality in these types of organizations.

Training organization of a middle-size company engaged in information technology services: theory and practice

In order to establish an active internal know-how -reserve~ in an information processing and engineering services . company, a training architecture tailored to the company as an whole must be defined. When a company' s earnings come from . advisory services dynamically structured i.n the form of projects, as is the case at hand, difficulties arise that must be taken into account in the architectural design. The first difficulties are of a psychological nature and the design method proposed here begjns wi th the definition of the highest training metasystem, which is aimed at making adjustments for the variety of perceptions of the company's human components, before the architecture can be designed. This approach may be considered as an application of the cybernetic Law of Requisita Variety (Ashby) and of the Principle of Conceptual Integrity (Brooks) . Also included is a description of sorne of the results of the first steps of metasystems at the level of company organization.

Diseño de los sistemas de comunicación en plantas de exploración y producción de hidrocarburos

Las plantas industriales de exploración y producción de petróleo y gas disponen de numerosos sistemas de comunicación que permiten el correcto funcionamiento de los procesos que tienen lugar en ella así como la seguridad de la propia planta. Para el presente Proyecto Fin de Carrera se ha llevado a cabo el diseño del sistema de megafonía PAGA (Public Address and General Alarm) y del circuito cerrado de televisión (CCTV) en la unidad de procesos Hydrocrcaker encargada del craqueo de hidrógeno. Partiendo de los requisitos definidos por las especificaciones corporativas de los grupos petroleros para ambos sistemas, PAGA y CCTV, se han expuesto los principios teóricos sobre los que se fundamenta cada uno de ellos y las pautas a seguir para el diseño y demostración del buen funcionamiento a partir de software específico. Se ha empleado las siguientes herramientas software: EASE para la simulación acústica, PSpice para la simulación eléctrica de las etapas de amplificación en la megafonía; y JVSG para el diseño de CCTV. La sonorización tanto de las unidades como del resto de instalaciones interiores ha de garantizar la inteligibilidad de los mensajes transmitidos. La realización de una simulación acústica permite conocer cómo va a ser el comportamiento de la megafonía sin necesidad de instalar el sistema, lo cual es muy útil para este tipo de proyectos cuya ingeniería se realiza previamente a la construcción de la planta. Además se comprueba el correcto diseño de las etapas de amplificación basadas en líneas de alta impedancia o de tensión constante (100 V). El circuito cerrado de televisión (CCTV) garantiza la transmisión de señales visuales de todos los accesos a las instalaciones y unidades de la planta así como la visión en tiempo real del correcto funcionamiento de los procesos químicos llevados a cabo en la refinería. El sistema dispone de puestos de control remoto para el manejo y gestión de las cámaras desplegadas; y de un sistema de almacenamiento de las grabaciones en discos duros (RAID-5) a través de una red SAN (Storage Area Network). Se especifican las diferentes fases de un proyecto de ingeniería en el sector de E&P de hidrocarburos entre las que se destaca: propuesta y adquisición, reunión de arranque (KOM, Kick Off Meeting), estudio in situ (Site Survey), plan de proyecto, diseño y documentación, procedimientos de pruebas, instalación, puesta en marcha y aceptaciones del sistema. Se opta por utilizar terminología inglesa dado al ámbito global del sector. En la última parte del proyecto se presenta un presupuesto aproximado de los materiales empleados en el diseño de PAGA y CCTV. ABSTRACT. Integrated communications for Oil and Gas allows reducing risks, improving productivity, reducing costs, and countering threats to safety and security. Both PAGA system (Public Address and General Alarm) and Closed Circuit Television have been designed for this project in order to ensure a reliable security of an oil refinery. Based on the requirements defined by corporate specifications for both systems (PAGA and CCTV), theoretical principles have been presented as well as the guidelines for the design and demonstration of a reliable design. The following software has been used: EASE for acoustic simulation; PSpice for simulation of the megaphony amplification loops; and JVSG tool for CCTV design. Acoustic for both the units and the other indoor facilities must ensure intelligibility of the transmitted messages. An acoustic simulation allows us to know how will be the performance of the PAGA system without installing loudspeakers, which is very useful for this type of project whose engineering is performed prior to the construction of the plant. Furthermore, it has been verified the correct design of the amplifier stages based on high impedance lines or constant voltage (100 V). Closed circuit television (CCTV) ensures the transmission of visual signals of all access to facilities as well as real-time view of the proper functioning of chemical processes carried out at the refinery. The system has remote control stations for the handling and management of deployed cameras. It is also included a storage system of the recordings on hard drives (RAID - 5) through a SAN (Storage Area Network). Phases of an engineering project in Oil and Gas are defined in the current project. It includes: proposal and acquisition, kick-off meeting (KOM), Site Survey, project plan, design and documentation, testing procedures (SAT and FAT), installation, commissioning and acceptance of the systems. Finally, it has been presented an estimate budget of the materials used in the design of PAGA and CCTV.

Teller: telemetría a partir de datos GPS

El avance y desarrollo de las nuevas tecnologías ha GPS sean cada vez más efectivos y precisos. En la actualidad son usados por miles de personas en una gran variedad de aplicaciones, siendo la competición una de ellas.Detrás del funcionamiento de estas pequeñas unidades juega un papel muy importante la telemetría, una tecnología que cada vez es más relevante en el mundo actual, y que gracias a las avances tecnológicos sus aplicaciones son cada vez mayores. En este Trabajo de Fin de Grado se diseñará Teller, un programa realizado en Erlang que mediante la telemetría y la tecnología actual realizará cálculos físicos de recorridos realizados en motocicleta, tales como velocidad o aceleración (tangencial y radial), además de clasificar los trayectos en tramos, dependiendo de si son curvas o rectas. Al mismo tiempo se realizará un estudio de precisión del dispositivo GPS, cotejando sus datos con los obtenidos por Teller. Por último, toda esta información se mostrará en un mapa para que el usuario pueda visualizarlo y que de esta forma sirva como herramienta de información y aprendizaje. The development of new technologies has contributed to the improvement of GPS devices, making them more effective and accurate. Nowadays they are used by thousands of people in a wide variety of applications like competitions. The technology that is behind the functionality of those devices is the telemetry, which is getting more and more important in the real world. In this thesis a new program called Teller will be designed. Made in Erlang, it will use telemetry so as to obtain new and valuable data from a motorcycle track. Examples of this type of data can be speed and acceleration (either tangential and radial) for instance. Besides, Teller will classify the track into segments, depending if it is a curve or a straight. At the same time a study will be carried out in order to know how accurate the GPS device is. This will be achieved by comparing the data retrieved by the device with the data calculated by Teller. Finally, all this information will be shown in a map, so the user can see information about his route in a visual way. xi

Overview of the Spanish Fuel Cycle: Technical Tours Organized by Spanish young Generation in Nuclear.

Spanish Young Generation in Nuclear (Jóvenes Nucleares, JJNN) is a non-profrt organization that depends on the Spanish Nuclear Society (Sociedad Nuclear Española, SNE).Since one of rts main goals is to spread the knowledge about nuclear power,severa! technical tours to facilities wrth an importan!role in the nuclear fuel cycle have been organized for the purpose ofleaming about the different stages of the Spanish tuel cycle. Spanish Young Generation in Nuclear had the opportunity to visit ENUSA Fuel Assembly Factory in Juzbado (Salamanca, Spain), Where it could be understood the front-end cycle which involves the uranium supply and storage, design and manufacturing of fuel bundles for European nuclear power plants. Alterwards, due to the tour of Almaraz NPP (PWR) and Santa María de Garoña NPP (BWR), rt could be comprehended how to obtain energy from this fuel in two different types of reactors.Furthermore,in these two plants, the facilities related to the back-end cycle could be toured. lt was possible to watch the Spent FuelPools, where the fuel bundles are stored under water until their activity is reduced enough to transport them to an Individual Temporary Storage Facility orto the Centralized Temporary Storage. Finally, a technical tour to ENSA Heavy Components Factory (ENSA) was accomplished, Where it could be experienced at first hand how different Nuclear Steam Supply System (NSSS) components and other nuclear elements, such as racks or shipping and storage casks for spent nuclear fuel, are manulactured. All these perlonned technical tours were a complete success thanks to a generous care and know-how of the wor1

Digital libraries for the preservation of research methods and associated artifacts

New digital artifacts are emerging in data-intensive science. For example, scientific workflows are executable descriptions of scientific procedures that define the sequence of computational steps in an automated data analysis, supporting reproducible research and the sharing and replication of best-practice and know-how through reuse. Workflows are specified at design time and interpreted through their execution in a variety of situations, environments, and domains. Hence it is essential to preserve both their static and dynamic aspects, along with the research context in which they are used. To achieve this, we propose the use of multidimensional digital objects (Research Objects) that aggregate the resources used and/or produced in scientific investigations, including workflow models, provenance of their executions, and links to the relevant associated resources, along with the provision of technological support for their preservation and efficient retrieval and reuse. In this direction, we specified a software architecture for the design and implementation of a Research Object preservation system, and realized this architecture with a set of services and clients, drawing together practices in digital libraries, preservation systems, workflow management, social networking and Semantic Web technologies. In this paper, we describe the backbone system of this realization, a digital library system built on top of dLibra.

The Role of Multilateral Coordination in Transport Policy: The Case of the Maghreb Countries

El WCTR es un congreso de reconocido prestigio internacional en el ámbito de la investigación del transporte y aunque las actas publicadas están en formato digital y sin ISSN ni ISBN, lo consideramos lo suficientemente importante como para que se considere en los indicadores. This paper aims at describing how multilateral cooperation policies are influencing national transport policies in developing countries. It considers the evolution of national transport policies and institutional frameworks in Algeria, Morocco and Tunisia in the last 10 years, and analyses the influence that EU cooperation programmes (particularly those within the Euromed programme initiative) and international coordination activities have played in the evolution towards efficient, sustainable transport systems in those countries. Notwithstanding the significant socioeconomic, political and institutional differences among the three countries, three major traits are common to the transport policy framework in all cases: a focus on megaprojects; substitution of traditional ministerial services by ad hoc public agencies to develop those megaprojects, and progressive involvement of international private players for the operation (and eventually the design and construction) of new projects, focusing on know-how transfer rather than investment needs. The hypotheses is that these similarities are largely due to the influence of the international cooperation promoted by the European Union since the mid- 1990s. The new decision making situation is characterized by the involvement of two new relevant stakeholders, the EU and a limited number of global transport operators. The hierarchical governance model evolves towards more complex structures, which explain the three common traits mentioned above. International coordination has been crucial for developing national transport visions, which are coherent with a regional, transnational system.

Método de análisis diacrónico para la intervención en el alojamiento con criterios ecológicos. El caso de Madrid 1940–2100

Las evidencias del impacto sobre el medio ambiente asociado al funcionamiento de las ciudades hacen que sea urgente proponer medidas que reduzcan este consumo y mejoren la eficiencia del metabolismo urbano. La existencia de límites en la disponibilidad de recursos materiales y energéticos, plantea actualmente un reto importante al ser humano: ¿son posibles otras formas de organización más adecuadas a esta condición de limitación? Para dar respuesta, resulta fundamental conocer cómo interactuarán nuestros sistemas urbanos en un modelo económico de continuo desarrollo, con la población que alojan, y si podrán adaptarse a la capacidad de carga limitada del Planeta, evitando futuras situaciones de colapso anunciadas desde distintos ámbitos científicos. En ese contexto, la tesis formula un método de análisis del alojamiento que, mediante la evaluación a largo plazo, permita proponer medidas de intervención para reducir el consumo de recursos asociado a su funcionamiento. Se parte de un enfoque ecológico para definir el alojamiento como una parte fundamental del sistema urbano, que está compuesto por tres elementos: habitantes, viviendas y recursos naturales; por tanto, para reducir los impactos asociados al alojamiento es necesario tener en cuenta la diferente naturaleza de estos elementos y el carácter dinámico de las relaciones que se producen entre ellos. La Ecología, a través del estudio de los ecosistemas, ha identificado estrategias de supervivencia y adaptación ante los cambios y perturbaciones. La similitud entre los elementos de un ecosistema (población y soporte) y los del alojamiento (habitantes, viviendas y recursos naturales) permite verificar que la aplicación de estas estrategias al alojamiento puede conducir a situaciones más deseables en la relación de los sistemas urbanos con su entorno A partir de esta hipótesis, se propone un método de análisis diacrónico1 o a largo plazo, para conocer la evolución en el tiempo del alojamiento a través de la cuantificación de una serie de indicadores descriptivos de los habitantes, las viviendas y los recursos naturales. La aplicación de este método a un sistema urbano permitiría conocer las características de los elementos del sistema y, para un ámbito temporal de futuro, prever su evolución, identificar escenarios no deseables y proponer medidas de intervención que corrijan anticipadamente estas situaciones y eviten impactos ambientales innecesarios. La validación del método de análisis se realiza mediante la aplicación al caso de Madrid en periodo retrospectivo (de 1940 a 2010) A partir del estudio de la evolución en Madrid de los indicadores seleccionados, se proponen medidas de intervención en el alojamiento basadas en estrategias ecológicas que habrían conducido a una evolución alternativa con un impacto menor sobre el medio ambiente que la situación actual. El método de análisis se aplica con carácter prospectivo definiendo tres escenarios de futuro para Madrid hasta 2100. Para cada uno de ellos se analiza la evolución previsible de los indicadores y se proponen diferentes medidas de intervención que, desde el punto de vista ecológico, conducirían a una situación más adecuada. La tesis concluye en el interés de este método de análisis diacrónico que permite estimar posibilidades en la evolución futura del alojamiento, identificar las necesidades de recursos para responder a las demandas de los habitantes y, desde un enfoque ecológico, definir, cuantificar y evaluar posibles medidas de intervención que reduzcan los impactos ambientales. El método, por tanto, es una herramienta de interés para la toma de decisiones en la intervención en el alojamiento y en la planificación urbana a largo plazo. ABSTRACT Evidence of the impact on the environment associated with the operation of cities make it urgent to propose measures to reduce energy consumption and improve the efficiency of urban metabolism. The limited availability of materials and energy resources currently poses a significant challenge to human beings: are more appropriate forms of organization for this limitation possible? In response, it is essential to know how our urban systems with the population they host will interact in an economic model of continuous development and whether they can adapt to the limited endurance capacity of the planet, thus avoiding future collapse situations which are being announced from different scientific fields. In this context, the thesis puts forward a method of housing analysis that by a long term assessment will enable to propose intervention measures to reduce resource consumption associated with its operation. The thesis is based on an ecological approach to identify housing as a fundamental part of the urban system, which is composed of three elements: inhabitants, homes and natural resources. Therefore, in order to reduce the impacts associated with housing it is necessary to consider the characteristics of these elements and the dynamic nature of the relationships among them. Ecology, through the analysis of ecosystems, has identified strategies for survival and adaptation to changes and disturbances. The similarity between the elements of an ecosystem (population and support) and housing (inhabitants, homes and natural resources) enables to verify that the implementation of these strategies to housing can lead to better situations in the relationship existing between urban systems with their environment. From this hypothesis, a diachronic or long term analysis method is proposed to know the evolution of housing over time through the quantification of a descriptive indicators series of inhabitants, homes and natural resources. The implementation of this method to a urban system would allow better knowledge of the characteristics of these elements and forecast their development, identify undesirable scenarios and propose early intervention measures to correct these situations and avoid unnecessary environmental impacts. The validation of the method of analysis has been proved in the city of Madrid for the years 1940-2010. From the analysis of the evolution of the indicators selected, accommodation intervention measures are proposed based on ecological strategies that would have led to an alternative development having less impact on the environment than that of the current situation. The analysis method is implemented prospectively defining three future scenarios for the city of Madrid until 2100. The likely evolution of the indicators are analyzed for each scenario and various intervention measures that would lead to a better situation from an ecological point of view are proposed. The thesis conclusion states the interest of this diachronic analysis method to estimate potential future developments in the housing field, identify resource requirements to meet the demands of the citizens and, from an ecological approach, define, quantify and assess possible intervention measures to reduce environmental impacts. The method, therefore, is an interesting tool for decision-making process as for the intervention in housing and urban planning in the long term.

El vídeo didáctico, facilitador del aprendizaje/auto-aprendizaje

Entre los recursos susceptibles de ser utilizados en red, desarrollados por el grupo de Innovación Educativa INNGEO, cabe destacar la producción de 13 vídeos que constituyen un valioso material para facilitar las Observaciones de campo en asignaturas de la materia “Topografía” del Grado en Ingeniería Geomática y Topografía; son, en la práctica, “la versión audiovisual” de los Cuadernos de observaciones de campo, tan enraizados en el “saber hacer” de las materias específicas de la titulación objeto de innovación. Con el objetivo principal de hacer del vídeo docente un recurso facilitador del aprendizaje/autoaprendizaje, se presenta, no solo la metodología, técnicas y tecnologías utilizadas en su diseño y producción, sino también el impacto que en asignaturas, Escuela, UPM y mundo técnico ha generado desde su incorporación como recurso innovador en asignaturas implementadas en Moodle, hasta su publicación en abierto en el Canal UPM de YouTube y en iTunes U. Abstract: Among the resources that could be used in a network, developed by the Educational Innovation INNGEO group included the production of 13 videos that provide va luable material for facilitating field observations in subjects of the matter "Topography" of the Engineering Degree in Geomatics and Surveying; They are, in practice, "visual version" of the Journal of field observations, as rooted in the "know how to do" of the specific subjects of the degree object of innovation. With the aim of making the educational video a resource facilitator of learning / self - study is presented, not only the methodology, techniques and technologies used in design and production, but also the impact on subjects, School, UPM and technical world has generated from its incorporation as a resource implemented innovative courses Moodle, until its open publication in the UPM Channel in YouTube and iTunes U.