A panoramic view of fiber and integrated optics in spain

A general view of the present status of optics and related fields in Spain is presented. The main emphasis is on the relation between optics and some emerging areas such as Optical Communications and Nonlinear Optics. Principal activities of the more important groups are summarized.

Materials Research for HiPER Laser Fusion Facilities: Chamber Wall, Structural Material and Final Optics

The European HiPER project aims to demonstrate commercial viability of inertial fusion energy within the following two decades. This goal requires an extensive Research &Development program on materials for different applications (e.g., first wall, structural components and final optics). In this paper we will discuss our activities in the framework of HiPER to develop materials studies for the different areas of interest. The chamber first wall will have to withstand explosions of at least 100 MJ at a repetition rate of 5-10 Hz. If direct drive targets are used, a dry wall chamber operated in vacuum is preferable. In this situation the major threat for the wall stems from ions. For reasonably low chamber radius (5-10 m) new materials based on W and C are being investigated, e.g., engineered surfaces and nanostructured materials. Structural materials will be subject to high fluxes of neutrons leading to deleterious effects, such as, swelling. Low activation advanced steels as well as new nanostructured materials are being investigated. The final optics lenses will not survive the extreme ion irradiation pulses originated in the explosions. Therefore, mitigation strategies are being investigated. In addition, efforts are being carried out in understanding optimized conditions to minimize the loss of optical properties by neutron and gamma irradiation

Effects of internal luminescence and internal optics on V-oc and J(sc) of III-V solar cells

For solar cells dominated by radiative recombination, the performance can be significantly enhanced by improving the internal optics. Internally radiated photons can be directly emitted from the cell, but if confined by good internal reflectors at the front and back of the cell they can also be re-absorbed with a significant probability. This so-called photon recycling leads to an increase in the equilibrium minority carrier concentration and therefore the open-circuit voltage, Voc. In multijunction cells, the internal luminescence from a particular junction can also be coupled into a lower bandgap junction where it generates photocurrent in addition to the externally generated photocurrent, and affects the overall performance of the tandem. We demonstrate and discuss the implications of a detailed model that we have developed for real, non-idealized solar cells that calculates the external luminescent efficiency, accounting for wavelength-dependent optical properties in each layer, parasitic optical and electrical losses, multiple reflections within the cell and isotropic internal emission. The calculation leads to Voc, and we show data on high quality GaAs cells that agree with the trends in the model as the optics are systematically varied. For multijunction cells the calculation also leads to the luminescent coupling efficiency, and we show data on GaInP/GaAs tandems where the trends also agree as the coupling is systematically varied. In both cases, the effects of the optics are most prominent in cells with good material quality. The model is applicable to any solar cell for which the optical properties of each layer are well-characterized, and can be used to explore a wide phase space of design for single junction and multijunction solar cells.

Bending reinforcement of timber beams with composite carbon fiber and basalt fiber materials

En el presente trabajo se lleva a cabo un estudio basado en datos obtenidos experimentalmente mediante el ensayo a flexión de vigas de madera de pino silvestre reforzadas con materiales compuestos. Las fibras que componen los tejidos utilizados para la ejecución de los refuerzos son de basalto y de carbono. En el caso de los compuestos de fibra de basalto se aplican en distintos gramajes, y los de carbono en tejido unidireccional y bidireccional. El material compuesto se realizó in situ, simultáneamente a la ejecución del refuerzo. Se aplicaron en una y en dos capas, según el caso, y la forma de colocación fue en ?U?, adhiriéndose al canto inferior y a las caras laterales de la viga mediante resina o mortero epoxi. Se analiza el comportamiento de las vigas según las variables de refuerzo aplicadas y se comparan con los resultados de vigas ensayadas sin reforzar. Con este trabajo queda demostrado el buen funcionamiento del FRP de fibra de basalto aplicado en el refuerzo de vigas de madera y de los tejidos de carbono bidireccionales con respecto a los unidireccionales.

Packaging and testing of fiber Bragg gratings for use as strain sensor for rock specimens

This paper reports a packaging and calibration procedure for surface mounting of fiber Bragg grating (FBG) sensors to measure strain in rocks. The packaging of FBG sensors is performed with glass fiber and polyester resin, and then subjected to tensile loads in order to obtain strength and deformability parameters, necessaries to assess the mechanical performance of the sensor packaging. For a specific package, an optimal curing condition has been found, showing good repeatability and adaptability for non-planar surfaces, such as occurs in rock engineering. The successfully packaged sensors and electrical strain gages were attached to standard rock specimens of gabbro. Longitudinal and transversal strains under compression loads were measured with both techniques, showing that response of FBG sensors is linear and reliable. An analytical model is used to characterize the influences of rock substrate and FBG packaging in strain transmission. As a result, we obtained a sensor packaging for non-planar and complex natural material under acceptable sensitivity suitable for very small strains as occurs in hard rocks.

Effects of feeding strategy, fiber source of the diet, and crude protein content on productive performance of broiler breeder hens

A 12-wk experiment was conducted to investigate the effect of feeding program, dietary fiber, and CP content of the diet on productive performance of Ross broiler breeder hens (41 wk of age). There were 12 treatments arranged factorially with 2 levels of CP (14.5 vs. 17.4%), 3 fiber sources (0 vs. 3% inulin vs. 3% cellulose), and 2 levels of feed intake (160 vs. 208 g/d) that corresponded to restricted (R) or ad libitum (AL) feeding systems. The experimental diets contained 2,800 kcal ME with either 0.65 (14.5% CP) or 0.78% Lys (17.4% CP).

Effect of type of fiber, site of fermentation, and method of analysis on digestibility of soluble and insoluble fiber in rabbits

The effect of type of fiber, site of fermetation, method for quantifying insoluble and soluble dietary fiber, and their correction for intestinal mucin on fiber digestibility were examined in rabbits. Three diets differing in soluble fiber were formulated (8.5% soluble fiber, on DM basis, in the low soluble fiber [LSF] diet; 10.2% in the medium soluble fiber [MSF] diet; and 14.5% in the high soluble fiber [HSF] diet). They were obtained by replacing half of the dehydrated alfalfa in the MSF diet with a mixture of beet and apple pulp (HSF diet) or with a mix of oat hulls and soybean protein (LSF diet). Thirty rabbits with ileal T-cannulas were used to determine ileal and fecal digestibility. Cecal digestibility was determined by difference between fecal and ileal digestibility. Insoluble fiber was measured as NDF, insoluble dietary fiber (IDF), and in vitro insoluble fiber, whereas soluble fiber was calculated as the difference between total dietary fiber (TDF) and NDF (TDF_NDF), IDF (TDF-IDF), and in vitro insoluble fiber (TDF-in vitro insoluble fiber). The intestinal mucin content was used to correct the TDF and soluble fiber digestibility. Ileal and fecal concentration of mucin increased from the LSF to the HSF diet group (P < 0.01). Once corrected for intestinal mucin, ileal and fecal digestibility of TDF and soluble fiber increased whereas cecal digestibility decreased (P < 0.01). Ileal digestibility of TDF increased from the LSF to the HSF diet group (12.0 vs. 28.1%; P < 0.01), with no difference in the cecum (26.4%), resulting in a higher fecal digestibility from the LSF to the HSF diet group (P < 0.01). Ileal digestibility of insoluble fiber increased from the LSF to the HSF diet group (11.3 vs. 21.0%; P < 0.01), with no difference in the cecum (13.9%) and no effect of fiber method, resulting in a higher fecal digestibility for rabbits fed the HSF diet compared with the MSF and LSF diets groups (P < 0.01).Fecal digestibility of NDF was higher compared with IDF or in vitro insoluble fiber (P < 0.01). Ileal soluble fiber digestibility was higher for the HSF than for the LSF diet group (43.6 vs. 14.5%; P < 0.01) and fiber method did not affect it. Cecal soluble fiber digestibility decreased from the LSF to the HSF diet group (72.1 vs. 49.2%; P < 0.05). The lowest cecal and fecal soluble fiber digestibility was measured using TDF-NDF (P < 0.01). In conclusion, a correction for intestinal mucin is necessary for ileal TDF and soluble fiber digestibility whereas the selection of the fiber method has a minor relevance. The inclusion of sugar beet and apple pulp increased the amount of TDF fermented in the small intestine.

Effect of fibers and whole grain content on quality attributes

Incorporation of fiber in cereals may lead to quality issues, thus decreasing consumer acceptance. This is partially due to deterioration of the microstructure, one of the primary quality attributes of cereals. The objective of this study was to better understand the mechanisms by which dietary fibers affect the quality of cereal products during extrusioncooking. The study quantified the effect of amount and type of fiber and whole grain on (i) texture, (ii) structure, and (iii) rehydration properties of extruded cereals. New innovative methods were applied and combined with traditional techniques to characterize both the structure and the rehydration properties. Extruded cereals were produced using a starch-based recipe (whole and wheat flours) and two sources of fibers (oat bran concentrate and wheat bran). The oat and wheat bran levels used in this study were 0, 10, and 20%. The different mixtures were extruded in a pilot twinscrew extruder BC21 (Clextral) and then sugar coated after drying. Mechanical properties of extruded cereals were investigated by compression test. The cellular structure was observed by X-ray tomography. The quality of coating (thickness, homogeneity) was analyzed by optical coherence tomography. The rehydration properties of such cereals in milk were evaluated by magnetic resonance imaging and optical coherence tomography. This work revealed that structure assessment of extruded cereals may lead to a better understanding of the effect of fiber addition on texture and rehydration properties. The application of innovative methods, such as optical coherence tomography and magnetic resonance imaging, was found to be useful to quantify the structural properties.

Correlation between ileal digestibility of amino acids and chemical composition of soybean meals in broilers at 21 days of age

The correlations between chemical composition and coefficient of standardized ileal digestibility (CSID) of crude protein (CP) and amino acids (AA) were determined in 22 soybean meal (SBM) samples originated from USA (n = 8), Brazil (BRA; n = 7) and Argentina (ARG; n = 7) in 21-day old broilers. Birds were fed a commercial maize-SBM diet from 1 to 17 days of age followed by the experimental diets in which the SBM tested was the only source of protein (205 g CP/kg) for three days. Also, in vitro nitrogen (N) digestion study was conducted with these samples using the two-step enzymatic method. The coefficient of apparent ileal digestibility (CAID) of the SBM, independent of the origin, varied from 0.820 to 0.880 for CP, 0.850 to 0.905 for lysine (Lys), 0.859 to 0.907 for methionine (Met) and 0.664 to 0.750 for cysteine (Cys). The corresponding CSID values varied from 0.850 to 0.966 for CP, 0.891 to 0.940 for Lys, 0.931 to 0.970 for Met and 0.786 to 0.855 for Cys. The CSID of CP and Lys of the SBM were positively correlated with CP (r = 0.514; P menor que 0.05 and r = 0.370; P = 0.09, respectively), KOH solubility (KOH sol.) (r = 0.696; P menor que 0.001 and r = 0.619; P menor que 0.01, respectively), trypsin inhibitor activity (TIA) (r = 0.541; P menor que 0.01 and r = 0.416; P = 0.05, respectively) and reactive Lys (r = 0.563; P menor que 0.01 and r = 0.486; P menor que 0.05) values, but no relation was observed with neutral detergent fiber and oligosaccharide content. No relation between the CSID of CP determined in vivo and N digestibility determined in vitro was found. The CSID of most key AA were higher for the USA and the BRA meals than for the ARG meals. For Lys, the CSID was 0.921, 0.919 and 0.908 (P menor que 0.05) and for Cys 0.828, 0.833 and 0.800 (P menor que 0.01) for USA, BRA and ARG meals, respectively. It is concluded that under the conditions of this experiment, the CSID of CP and Lys increased with CP content, KOH sol., TIA and reactive Lys values of the SBM. The CSID of most limiting AA, including Lys and Cys, were higher for USA and BRA meals than for ARG meals.

Effect of type of dietary carbohydrates on digestion, intestinal barrier and growth performance in 25-d weaned rabbits

Los objetivos globales de esta tesis han sido estudiar el efecto que los carbohidratos de la dieta ejercen sobre los rendimientos productivos, la barrera intestinal, y la digestión de animales destetados a 25 días de edad. Además se ha estudiado cuál es el mejor periodo para determinar la digestibilidad fecal tras el destete a esta edad. En el primer experimento se estudió el efecto de la fibra neutro detergente soluble (FNDS) sobre la barrera intestinal, digestión, microbiota intestinal y rendimientos productivos de gazapos en gazapos en la fase post-destete. Se diseñaron tres piensos isonutritivos en los que la única fuente de variación fueron los niveles de fibra soluble. A partir de una dieta control (AH) con 103 g/kg de materia seca de FNDS y alfalfa como fuente principal de fibra, se sustituyó la mitad de esta alfalfa por una mezcla de pulpa de remolacha y pulpa de manzana (75:25) en el pienso B-AP y por una mezcla de cascarilla y concentrado de proteína de soja (88:12) en el pienso OH, obteniéndose 131 y 79 g/kg de FNDS sobre materia seca, respectivamente. Los conejos se destetaron a 25 días y fueron alimentados con los piensos experimentales hasta los 35 días de edad, momento en el que se sacrificaron para la determinación de la digestibilidad ileal aparente (DIA) de la materia seca (MS), proteína bruta (PB) y almidón, la morfología de la mucosa, y actividad enzimática en el yeyuno, el tejido linfoide asociado a la mucosa, así como la microbiota intestinal. Para la determinación de la morfología de la mucosa se utilizaron adicionalmente 19 animales lactantes de 35 días de edad. Para el estudio de la tasa de mortalidad, se utilizaron 118 animales más por tratamiento que recibieron los piensos experimentales durante las dos semanas post-destete y posteriormente un pienso comercial hasta los 60 días de edad. Los animales recibieron durante todo el experimento medicación en el agua de bebida (100 ppm de apramicina sulfato y 120 ppm de tilosina tartrato). El nivel de fibra soluble mejoró los parámetros que se utilizaron para la caracterización del estado de la barrera intestinal. Los conejos alimentados con el mayor nivel de FNDS en el pienso presentaron una mayor longitud de los villi (P=0.001), un mayor ratio longitud villi/profundidad de las criptas (8.14; P=0.001), una mayor actividad disacaridásica (8671 μmol de glucosa/g de proteína; P=0.019), así como una mayor digestibilidad ileal (96.8%; P=0.002), observándose una reducción en el flujo ileal de almidón a medida que se incrementó el nivel de fibra soluble en el pienso (1,2 vs 0,5 g/d; P=0.001). Los animales lactantes a 35 días de edad presentaron un ratio longitud de villi/profundidad de las criptas menor que el observado en aquéllos alimentados con el pienso B-AP (6.70), pero superior al de los piensos AH y OH. Niveles inferiores de NDFS tendieron (P=0.074) a incrementar la respuesta inmune de tipo celular (linfocitos CD8+). El pienso también afectó a la producción de IL2 (CD25+; P=0.029; CD5+CD25+; P=0.057), pero sin llegar a establecerse una clara relación con el nivel de fibra soluble. La diversidad de la microbiota intestinal no se vio afectada por el pienso (P ≥ 0.38). Los animales alimentados con las piensos B-AP y AH presentaron una reducción en la frecuencia de detección de Clostridium perfringens tanto en íleon (P=0.062) como en ciego (4.3 vs. 17.6%, P =0.047), comparado con el pienso OH. Además la tasa de mortalidad (118 gazapos/pienso) disminuyó de 14.4% en el pienso OH a 5.1% en el pienso B-AP. Entre los 32 y los 35 días de edad se determinó la digestibilidad fecal aparente (14/pienso) de la materia seca (MS), energía bruta (EB), proteína bruta (PB), fibra neutro detergente (FND), fibra ácido detergente (FAD) y almidón. Este grupo, junto con otros nueve animales por tratamiento se utilizaron para determinar el peso del estómago y el ciego, la concentración cecal de ácidos grasos volátiles (AGV) y amoniaco (NH3), así como las tasas de similitud de la microbiota intestinal. Además se estudiaron los rendimientos productivos (35 animales/tratamiento) de los gazapos durante todo el período de cebo, consumiendo los piensos experimentales desde el destete hasta los 35 días y posteriormente un pienso comercial hasta los 60 días de edad. Niveles crecientes de FNDS mejoraron la digestibilidad fecal de la materia seca (MS) y energía (P<0.001). La inclusión FNDS aumentó de manera lineal el peso del contenido cecal (P=0.001) y el peso del aparato digestivo completo (P=0.008), y en los días previos al sacrificio disminuyó de manera lineal el consumo medio diario (P=0.040). Se observó además, una disminución lineal (P≤0.041) del pH del estómago. No se encontró relación entre el pH, la concentración y proporciones molares de AGV y el nivel de FNDS. El pienso pareció tener un efecto, incluso superior al de la madre, sobre la tasa de similitud de la microbiota, y los efectos fueron mayores a nivel cecal que ileal. La eficacia alimenticia aumentó de manera lineal en un 12% entre piensos extremos tras el destete (25- 39d) y en un 3% en el período global de cebo con niveles mayores de NDFS. El consumo medio diario durante la fase post-destete y durante todo el período de cebo, tendió a aumen tar (P≤0.079) con niveles mayores de FNDS, sin embargo no se apreció efecto sobre la ganancia media diaria (P≥0.15). En conclusión, el incremento del nivel de fibra soluble en el pienso parece resultar beneficioso para la salud del animal ya que mejora la integridad de la mucosa, y reduce la frecuencia de detección de potenciales patógenos como C. perfringens y Campylobacter spp. Conforme a estos resultados, debería tenerse en cuenta el contenido en fibra soluble en la formulación de piensos de conejos en la fase post-destete. El objetivo del segundo experimento fue determinar el efecto de la fuente de almidón sobre la digestión, la microbiota intestinal y los rendimientos productivos en conejos destetados con 25 días de edad. Se formularon tres piensos isonutritivos en los que se modificaron las principales fuentes de almidón: trigo crudo, trigo cocido y una combinación de trigo y arroz cocido. Dos grupos de 99 y 193 animales se destetaron con 25 días de edad. El primero de ellos se utilizó para la determinación de los parámetros productivos conforme al mismo protocolo seguido en el experimento anterior. El segundo de los grupos se utilizó para la determinación de la digestibilidad fecal de 32 a 35 d, la digestibilidad ileal aparente (DIA) a 35 d, la morfología de la mucosa intestinal, los parámetros de fermentación cecal; así como, la caracterización de la microbiota intestinal. Se utilizaron además dos grupos adicionales de animales 384 (medicados) y 177 (no medicados) para estudiar el efecto de la suplementación con antibióticos en el agua de bebida sobre la mortalidad. El procesado térmico del trigo mejoró ligeramente la digestibilidad ileal del almidón (P=0.020) pero no modificó el flujo final de almidón que alcanzó el ciego, observándose una mayor frecuencia de detección de Campylobacter spp. y Ruminococcus spp. en ciego (P≤0.023), pero sin cambios a nivel ileal. El procesado térmico del trigo no afectó tampoco a los parámetros productivos, la mortalidad, la digestibilidad ileal y fecal o la morfología de la mucosa. La sustitución parcial del trigo cocido por arroz cocido, penalizó la digestibilidad ileal del almidón (P=0.020) e incrementó el flujo ileal de este nutriente al ciego (P=0.007). Sin embargo no afectó a la mortalidad, pese a que se detectaron cambios en la microbiota tanto a nivel ileal como cecal, disminuyendo la frecuencia de detección de Campylobacter spp. (en íleon y ciego), Helicobacter spp. (en íleon) y Ruminococcus spp (en ciego) e incrementando Bacteroides spp. (en ciego) (P≤0.046). El empleo de arroz cocido en las piensos post-destete no tuvieron efectos sobre los parámetros productivos, la mortalidad, la digestibilidad ileal y fecal a excepción del almidón, o la morfología de la mucosa. La suplementación con antibiótico redujo la fre cuencia de detección de la mayoría de las bacterias estudiadas (P≤0.048), sobre todo para Campylobacter spp., Clostridium perfringens y Propionibacterium spp. (P≤0.048), observándose un efecto mayor a nivel ileal que cecal, lo que se asoció a la bajada significativa (P<0.001) de la mortalidad. En conclusión, los resultados de este experimento indican que la fuente de almidón afecta a la microbiota intestinal pero no influiye sobre la salud del animal. En relación al procesado, el uso de trigo cocido junto con arroz cocido no mejora los resultados obtenidos con trigo duro, si bienserían necesarios más experimentos que confirmaran este punto. El último de los experimentos se centró en un aspecto metodológico. Dado que, los conejos destetados presentan un patrón digestivo diferente al de un animal adulto resultado de su inmadurez digestiva, el objetivo buscado era tratar de determinar el mejor procedimiento para la determinación de la digestibilidad fecal en los gazapos en la fase post-destete. Para tal fin se utilizaron 15 animales/tratamiento de tres camadas diferentes que se destetaron con 25 días, suministrándoles un pienso comercial de crecimiento-cebo. Se registró el consumo medio diario y la excreción diaria de heces desde el día 25 hasta el día 40 de edad para la determinación de la digestibilidad de la MS. La camada afectó al consumo medio diario y la excreción de heces (P=0.013 y 0.014, respectivamente), observándose una tendencia (P=0.061) en la digestibilidad. La edad afectó (P<0.001) a todos estos factores, incrementándose de manera más evidente la excreción que la ingestión de materia seca en la primera semana de vida, para aumentar de forma paralela a partir de la segunda. La correlación entre el consumo medio diario fue mayor con la excreción de heces del mismo día que con la del día siguiente, por lo que se utilizó el primero para la determinación de la digestibilidad de la MS (MSd). La MSd disminuyó de manera lineal hasta los 32 días de edad (2.17±0.25 unidades porcentuales por día), mientras que permaneció constante desde los 32 a los 40 días (69.4±0.47%). Por otro lado, la desviación estándar de la MSd se redujo cuando se incrementó el período de recogida de 2 a 6 días en un 54%. Conforme a los resultados obtenidos, se puede concluir que no es aconsejable comenzar las pruebas de digestibilidad antes de los 32 días de edad y que el número de animales necesario para detectar diferencias significativas entre tratamientos dependerá del período de recogida de heces. ABSTRACT The global aim of this thesis has been to study the effect of dietary carbohydrates on growth, performance, digestion and intestinal barrier in 25-d weaned rabbits. In addition there has also been studied which is the best period to determine the fecal digestibility after weaning. The first experiment focused on the effect of Neutral Detergent Soluble Fibre (NDSF) on gut barrier function, digestion, intestinal microbiota and growth performance n rabbits in the post-weaning period. Three isonutritive diets which only varied in the levels of soluble fiber were formulated such as it described as follows: a control diet (AH) containing 103 g of neutral detergent soluble fiber, including alfalfa as main source of fiber, was replaced by a mixture of beet and apple pulp (75-25) in the B-AP diet and, by a mix of oat hulls and soybean protein concentrate (88:12) in the OH diet, resulting 131 and 79 g of NDFS/kg of dry matter, respectively. Rabbits, weaned at 25 days of age, were fed the experimental diets up to 35 days of age, moment in which they were slaughtered for apparent ileal digestibility (AID) of dry matter (DM), crude protein (CP) and starch, mucosa morphology, sucrose activity, characterization of lamina propria lymphocytes and intestinal microbiota. To assess mucosal morphology, 19 suckling 35-d-old rabbits were also used. For mortality study, besides these animals, 118 additional rabbits per treatment were fed the experimental diets for two weeks period and thereafter received a commercial diet until 60 days of age. Rabbits were water medicated during the whole experimental period (100 ppm de apramicine sulphate and 120 ppm of tylosine tartrate). Level of soluble fiber improved all the parameters used for the characterization of the intestinal barrier condition. Villous height of the jejunal mucosa increased with dietary soluble fiber (P=0.001). Villous height of jejunal mucosa increased with dietary soluble fiber (P = 0.001). Rabbits fed the highest level of soluble fiber (BA-P diet) showed the highest villous height/crypth depth ratio (8.14; P = 0.001), sucrase specific activity (8671 μmol glucose/ g protein; P = 0.019), and the greatest ileal starch digestibility (96.8%; P = 0.002). The opposite effects were observed in rabbits fed decreased levels of soluble fiber (AH and OH diets; 4.70, 5,848 μmol of glucose/g of protein, as average, respectively). The lowest ileal starch digestibility was detected for animal fed OH diet (93.2%). Suckling rabbits of the same age showed a lower villous height/crypt depth ratio (6.70) compared with the B-AP diet group, but this ration was higher that the AH or OH diet groups. Lower levels of soluble fiber tended (P = 0.074) to increase the cellular immune response (CD8+ lymphocytes). Diet affected IL-2 production (CD25+, P = 0.029; CD5+CD25+, P = 0.057), with no clear relationship between soluble fiber and IL-2. The intestinal microbiota biodiversity was not affected by diets (P ≥ 0.38). Animals fed B-AP and AH diets had a reduced cecal frequency of detection compatible with Campylobacter spp. (20.3 vs. 37.8, P = 0.074), and Clostridium perfringens (4.3 vs. 17.6%, P = 0.047), compared with the OH diet group. Moreover, the mortality rates decreased from 14.4 (OH diet) to 5.1% (B-AP diet) with the increased presence of soluble fiber in the diet. Between 32 and 35 days of age, faecal apparent digestibility of dry matter (DM), gross energy (GE), crude protein (CP), neutral detergent fiber (NDF), acid detergent fiber (ADF) and starch was determined (14/diet). This group, plus another nine rabbits/diet were used to determine weight of stomach and caecum and their contents, cecal fermentation traits and similarity rate (SR) of intestinal microbiota. Besides, growth performance parameters (35 rabbits/diet) were studied during the whole fattening period, in animals consuming the experimental feed after the weaning up to 35 days of age and later on a commercial diet up animals reached 60 days of age. Increasing levels of Neutral Detergent Soluble Fiber improved faecal dry matter and energy digestibility (P<0.001). NDSF inclusion improved linearly weight of the caecal content (P=0.001) and the total gastrointestinal tract (P=0.008), and in the previous days to slaughter a linear decrease of daily feed intake in diet with highest level of soluble fiber was also observed. Stomach pH decreased linearly with increasing levels of NDFS (P≤0.041). No relation between NDSF level on pH, concentration and molar proportion of VFA was found. Treatments appeared to influence the similarity rate of microbiota, even higher to mother effect. These effects were higher in ileum than in caecum. A linear positive effect of feed efficiency was observed, which increased around 12% in the two weeks post-weaning (25-39d) and 3% in the whole fattening period between extreme diets with highest levels of soluble fiber. Average daily feed intake during the two weeks after weaning and in the whole fattening period, tended (P≤0.079) to increase with highest levels of NDSF; although there were no effect on daily weight gain (≥0.15). In conclusion, an increase of soluble fiber in the feed seems to be beneficial for animal health, due to improve mucose integrity and reduce detection frequency of those poten tial pathogens like C. perfringens and Campylobacter spp. According to these results, level of soluble fiber should be taking care in feed rabbit formulation in the post-weaning period. The objective of the second experiment was to determine the effect of source of starch on digestion, intestinal microbiota and growth performance in twenty-five-day old weaned rabbits. To accomplish with this aim three iso-nutritive diets were formulated with different source of starch: raw wheat, boiled wheat and a combination of boiled wheat and boiled rice. Two groups of 99 and 193 rabbits were weaned at 25 days of age. The first group was used for growth performance determination following the same protocol than in previous experiment. The second group was used to determine faecal digestibility from 32 to 35 d, apparent ileal digestibility (AID) at 35 d, jejunal mucosa morphology, caecal fermentation traits and characterization of intestinal microbiota. For mortality, two additional groups of 384 (medicated) and 177 (not medicated) were used in order to study the effect of antibiotic water supply supplementation. Heat processing of starch slightly improved ileal digestibility of starch (P=0.020) but did not modify the flow of starch to the caecum. An increase in frequency of detection of Campylobacter spp. y Ruminococcus spp. was observed in the caecum (P≤0.023), with no changes at ileal level. Heat processing of wheat did not modify growth performance, mortality, ileal or faecal digestibility and mucosa morphology. Partial substitution of boiled wheat for boiled rice in the diet impaired ileal starch digestibility (P=0.020) and increased the ileal flow of this nutrient to the caecum (P=0.007). However, it did not affect mortality rate, although changes in the ileal and caecal intestinal microbiota were detected, decreasing the frequency of detection of Campylobacter spp. (both ileum and caecum), Helicobacter spp. (at ileum) and Ruminococcus spp (at caecum) and increasing the Bacteroides spp. (at caecum) (P≤0.046). The effect of boiled rice supplementation did not alter growth performance, mortality, ileal or faecal digestibility of other nutrients than starch, and mucosa morphology. Medication of rabbits reduced the ileal frequency of detection of most bacteria studied (P≤0.048), especially for Campylobacter spp., Clostridium perfringens y Propionibacterium spp. (P≤0.048), resulting the effect higher at ileal than caecal level and relating it with a strong reduction of mortality rate (P<0.001). In conclusion, the results of this experiment make think that the source of starch affects the intestinal microbiota but they do not seem to influence animal health. In relation to the effect of heat processed the use of cooked wheat or cooked rice it does not seem to im prove the results obtained with hard wheat, but there would be necessary more experiments that were confirming this point. The last experiment focused on a methodological aspect. Considering that, weaned rabbits have a different digestive pattern than older animals due to their digestive immaturity; the fixed objective was to determine the best procedure for faecal digestibility determination in young rabbits in the post-weaning period. Fifteen rabbits from 5 different litters were weaned at 25 days of age and fed with a commercial feed. Feed intake and faeces excretion were recorded daily from 25 to 40 days of age for dry matter digestibility (DMd) determination. Litter affected daily DM intake and excretion (P=0.013 y 0.014, respectively) and tended to affect DMd (P=0.061). Age affected all these factors (P<0.001), but ingestion increased slowly than dry matter excretion during the first week buth they evolved similarly in the second week. The correlation between daily feed intakes was higher with the faeces excretion of the day than with faeces excretion of the next day, and the first values were used to determine daily DMd. The DMd decreased linearly from weaning to 32 d of age (2.17±0.25 percentage units per day), whereas from 32 to 40 d remained constant (69.4±0.47%). On the other hand, average standard deviation of DMd decreased by 54% when the length of collection period increased from 2 to 6d. Consequently to the obtained results, it could be concluded that it would not be advisable to start digestibility trials before the 32 days of age and that the number of animals required to detect a significant difference among means would depend on the collection period.

Multiscale Modeling of Composites: Toward Virtual Testing ... and Beyond

Recent developments in the area of multiscale modeling of fiber-reinforced polymers are presented. The overall strategy takes advantage of the separa-tion of length scales between different entities (ply, laminate, and component) found in composite structures. This allows us to carry out multiscale modeling by computing the properties of one entity (e.g., individual plies) at the relevant length scale, homogenizing the results into a constitutive model, and passing this information to the next length scale to determine the mechanical behavior of the larger entity (e.g., laminate). As a result, high-fidelity numerical sim-ulations of the mechanical behavior of composite coupons and small compo-nents are nowadays feasible starting from the matrix, fiber, and interface properties and spatial distribution. Finally, the roadmap is outlined for extending the current strategy to include functional properties and processing into the simulation scheme.

Experimental and numerical study of cw green laser crystallization of a-Si:H thin films

Crystallization and grain growth technique of thin film silicon are among the most promising methods for improving efficiency and lowering cost of solar cells. A major advantage of laser crystallization and annealing over conventional heating methods is its ability to limit rapid heating and cooling to thin surface layers. Laser energy is used to heat the amorphous silicon thin film, melting it and changing the microstructure to polycrystalline silicon (poly-Si) as it cools. Depending on the laser density, the vaporization temperature can be reached at the center of the irradiated area. In these cases ablation effects are expected and the annealing process becomes ineffective. The heating process in the a-Si thin film is governed by the general heat transfer equation. The two dimensional non-linear heat transfer equation with a moving heat source is solve numerically using the finite element method (FEM), particularly COMSOL Multiphysics. The numerical model help to establish the density and the process speed range needed to assure the melting and crystallization without damage or ablation of the silicon surface. The samples of a-Si obtained by physical vapour deposition were irradiated with a cw-green laser source (Millennia Prime from Newport-Spectra) that delivers up to 15 W of average power. The morphology of the irradiated area was characterized by confocal laser scanning microscopy (Leica DCM3D) and Scanning Electron Microscopy (SEM Hitachi 3000N). The structural properties were studied by micro-Raman spectroscopy (Renishaw, inVia Raman microscope).

New concepts and techniques for the development of high-efficiency concentrating photovoltaic modules

El interés por los sistemas fotovoltaicos de concentración (CPV) ha resurgido en los últimos años amparado por el desarrollo de células multiunión de muy alta eficiencia basadas en semiconductores de los grupos III-V. Estas células han permitido obtener módulos de concentración con eficiencias que prácticamente duplican las del panel plano y que llegan al 35% en los módulos récord. Esta tesis está dedicada al diseño y la implementación experimental de nuevos conceptos que permitan obtener módulos CPV que no sólo alcancen una eficiencia alta en condiciones estándar sino que, además, sean lo suficientemente tolerantes a errores de montaje, seguimiento, temperatura y variaciones espectrales para que la energía que producen a lo largo del año sea máxima. Una de las primeras cuestiones que se abordan es el diseño de elementos ópticos secundarios para sistemas cuyo primario es una lente de Fresnel y que permiten, para una concentración fija, aumentar el ángulo de aceptancia y la tolerancia del sistema. Varios secundarios reflexivos y refractivos han sido diseñados y analizados mediante trazado de rayos. En particular, utilizando óptica anidólica y basándose en el diseño de una sola etapa conocido como ‘concentrador dieléctrico que funciona por reflexión total interna‘, se ha diseñado, fabricado y caracterizado un secundario con salida cuadrada que, usado junto con una lente de Fresnel, permite alcanzar simultáneamente una elevada eficiencia, concentración y aceptancia. Además, se ha propuesto y prototipado un método alternativo de fabricación para otro de los secundarios, denominado domo, consistente en el sobremoldeo de silicona sobre células solares. Una de las características que impregna todo el trabajo realizado en esta tesis es la aproximación holística en el diseño de módulos CPV, es decir, se ha prestado especial atención al diseño conjunto de la célula y la óptica para garantizar que el sistema total alcance la mayor eficiencia posible. En este sentido muchos sistemas ópticos desarrollados en esta tesis han sido diseñados, caracterizados y optimizados teniendo en cuenta que el ajuste de corriente entre las distintas subcélulas que comprenden la célula multiunión bajo el concentrador sea muy próximo a uno. La capa antirreflectante sobre la célula funciona, en cierto modo, como interfaz entre la óptica y la célula, por lo que se ha diseñado un método de optimización de capas antirreflectantes que considera no sólo el amplio rango de longitudes de onda para el que las células multiunión son sensibles sino también la distribución angular de intensidad sobre la célula creada por la óptica de concentración. Además, la cuestión de la falta de uniformidad también se ha abordado mediante la comparación de las distribuciones espectrales y espaciales de irradiancia que crean diferentes ópticas (simuladas mediante trazado de rayos y fotografiadas) y las pérdidas de eficiencia que experimentan las células iluminadas por dichas ópticas de concentración medidas experimentalmente. El efecto de la temperatura en la óptica de concentración también ha sido objeto de estudio de esta tesis. En particular, mediante simulaciones de elementos finitos se han dado los primeros pasos para el análisis de las deformaciones que sufren los dientes de las lentes de Fresnel híbridas (vidrio-silicona), así como el cambio de índice de refracción con la temperatura y la influencia de ambos efectos sobre el funcionamiento de los sistemas. Se ha implementado un modelo que tiene por objeto considerar las variaciones ambientales, principalmente temperatura y contenido espectral de la radiación directa, así como las sensibilidades térmica y espectral de los sistemas CPV, con el fin de maximizar la energía producida por un módulo de concentración a lo largo de un año en un emplazamiento determinado. Los capítulos 5 y 6 de este libro están dedicados al diseño, fabricación y caracterización de un nuevo concepto de módulo fotovoltaico denominado FluidReflex y basado en una única etapa reflexiva con dieléctrico fluido. En este nuevo concepto la presencia del fluido aporta algunas ventajas significativas como son: un aumento del producto concentración por aceptancia (CAP, en sus siglas en inglés) alcanzable al rodear la célula con un medio cuyo índice de refracción es mayor que uno, una mejora de la eficiencia óptica al disminuir las pérdidas por reflexión de Fresnel en varias interfaces, una mejora de la disipación térmica ya que el calor que se concentra junto a la célula se trasmite por convección natural y conducción en el fluido y un aislamiento eléctrico mejorado. Mediante la construcción y medida de varios prototipos de unidad elemental se ha demostrado que no existe ninguna razón fundamental que impida la implementación práctica del concepto teórico alcanzando una elevada eficiencia. Se ha realizado un análisis de fluidos candidatos probando la existencia de al menos dos de ellos que cumplen todos los requisitos (en particular el de estabilidad bajo condiciones de luz concentrada) para formar parte del sistema de concentración FluidReflex. Por ´ultimo, se han diseñado, fabricado y caracterizado varios prototipos preindustriales de módulos FluidReflex para lo cual ha sido necesario optimizar el proceso de fabricación de la óptica multicavidad a fin de mantener el buen comportamiento óptico obtenido en la fabricación de la unidad elemental. Los distintos prototipos han sido medidos, tanto en el laboratorio como bajo el sol real, analizando el ajuste de corriente de la célula iluminada por el concentrador FluidReflex bajo diferentes distribuciones espectrales de la radiación incidente así como el excelente comportamiento térmico del módulo. ABSTRACT A renewed interest in concentrating photovoltaic (CPV) systems has emerged in recent years encouraged by the development of high-efficiency multijunction solar cells based in IIIV semiconductors that have led to CPV module efficiencies which practically double that of flat panel PV and which reach 35% for record modules. This thesis is devoted to the design and experimental implementation of new concepts for obtaining CPV modules that not only achieve high efficiency under standard conditions but also have such a wide tolerance to assembly errors, tracking, temperature and spectral variations, that the energy generated by them throughout the year is maximized. One of the first addressed issues is the design of secondary optical elements whose primary optics is a Fresnel lens and which, for a fixed concentration, allow an increased acceptance angle and tolerance of the system. Several reflective and refractive secondaries have been designed and analyzed using ray tracing. In particular, using nonimaging optics and based on the single-stage design known as ‘dielectric totally internally reflecting concentrator’, a secondary with square output has been designed, fabricated and characterized. Used together with a Fresnel lens, the secondary can simultaneously achieve high efficiency, concentration and acceptance. Furthermore, an alternative method has been proposed and prototyped for the fabrication of the secondary named dome. The optics is manufactured by direct overmolding of silicone over the solar cells. One characteristic that permeates all the work done in this thesis is the holistic approach in the design of CPV modules, meaning that special attention has been paid to the joint design of the solar cell and the optics to ensure that the total system achieves the highest attainable efficiency. In this regard, many optical systems developed in the thesis have been designed, characterized and optimized considering that the current matching among the subcells within the multijunction solar cell beneath the optics must be close to one. Antireflective coating over the cell acts, somehow, as an interface between the optics and the cell. Consequently, a method has been designed to optimize antireflective coatings that takes into account not only the broad wavelength range that multijunction solar cells are sensitive to but also the angular intensity distribution created by the concentrating optics. In addition, the issue of non-uniformity has also been addressed by comparing the spectral and spatial distributions of irradiance created by different optics (simulated by ray tracing and photographed) and the efficiency losses experienced by cells illuminated by those concentrating optics experimentally determined. The effect of temperature on the concentrating optics has also been studied in this thesis. In particular, finite element simulations have been use to analyze the deformations experienced by the facets of hybrid (silicon-glass) Fresnel lenses, the change of refractive index with temperature and the influence of both effects on the system performance. A model has been implemented which take into consideration atmospheric variations, mainly temperature and spectral content of the direct normal irradiance, as well as thermal and spectral sensitivities of systems, with the aim of maximizing the energy harvested by a CPV module throughout the year in a particular location. Chapters 5 and 6 of this book are devoted to the design, fabrication, and characterization of a new concentrator concept named FluidReflex and based on a single-stage reflective optics with fluid dielectric. In this new concept, the presence of the fluid provides some significant advantages such as: an increased concentration acceptance angle product (CAP) achievable by surrounding the cell with a medium whose refractive index is greater than one, an improvement of the optical efficiency by reducing losses due to Fresnel reflection at several interfaces, an improvement in heat dissipation as the heat concentrated near the cell is transmitted by natural convection and conduction in the fluid, and an improved electrical insulation. By fabricating and characterizing several elementary-unit prototypes it was shown that there is no fundamental reason that prevents the practical implementation of this theoretical concept reaching high efficiency. Several fluid candidates were investigated proving the existence of at least to fluids that meet all the requirements (including the stability under concentrated light) to become part of the FluidReflex concentrator. Finally, several pre-industrial FluidReflex module prototypes have been designed and fabricated. An optimization process for the manufacturing of the multicavity optics was necessary to attain such an optics quality as the one achieved by the single unit. The module prototypes have been measured, both indoors and outdoors, analyzing the current matching of the solar cells beneath the concentrator for different spectral distribution of the incident irradiance. Additionally, the module showed an excellent thermal performance.

Plaster reinforcement with fibers by mineral wool obtained from the recycle of construction and demolition waste

The use of mineral wool is becoming more widespread due to increased acoustic and thermal demands of Spanish Technical Building Code. This increase affects both in rehabilitation and new construction projects. Therefore, waste generation of this type of insulating material is having more importance. The main objective of this research is to study the possibility of recycling fiber obtained from mineral wool of the C&DW as an alternative material to chopped glass fibers that are currently used as reinforcing elements in the prefabricated plaster. To achieve this objective, series are made of plaster E-35 additived with rock wool residue and glass wool residue at different rates of addition. These series are repeated by changing the additive by E fiberglass (length of 25mm) to make a comparative analysis with respect to the series additived with mineral wool waste. All the series are subjected to the test to determine Shore C surface hardness and mechanical testing to determine the compressive and flexural strength. From the results it can be concluded that: with rock wool residue, increases Shore C hardness up to 15% with respect to the glass fiber and 9% with respect to the glass wool, with a percentage of addition 2%. With rock wool residue, weight is decreased by 5% with respect to the glass fiber and 4% with respect to the glass wool waste, with an addition percentage of 4%. For an addition rate of 4%, results in the flexural strength test with fiberglass are 85% higher than those obtained with glass wool residue. However, for a percentage of 1% addition, the results obtained with glass wool residue are 35% higher than those obtained with fiberglass. For an addition rate of 3% results in the compressive strength test with fiberglass are 54% lower than those obtained with rock wool waste and 70% lower than those obtained with glass wool waste. Comparing the two mineral wools, it can be concluded that up to 3% of the addition, the glass wool series results obtained are 10% higher than those additived with rock wool. However, higher percentages of addition show that the results obtained with rock wool are 35% higher than those obtained with glass wool. The general conclusion is that the series additived with mineral wool from C&DW show better results in tests than the ones used nowadays as plaster reinforcement.

Color uniformity in spotligths - visual perception and system design

La iluminación con diodos emisores de luz (LED) está reemplazando cada vez en mayor medida a las fuentes de luz tradicionales. La iluminación LED ofrece ventajas en eficiencia, consumo de energía, diseño, tamaño y calidad de la luz. Durante más de 50 años, los investigadores han estado trabajando en mejoras LED. Su principal relevancia para la iluminación está aumentando rápidamente. Esta tesis se centra en un campo de aplicación importante, como son los focos. Se utilizan para enfocar la luz en áreas definidas, en objetos sobresalientes en condiciones profesionales. Esta iluminación de alto rendimiento requiere una calidad de luz definida, que incluya temperaturas ajustables de color correlacionadas (CCT), de alto índice de reproducción cromática (CRI), altas eficiencias, y colores vivos y brillantes. En el paquete LED varios chips de diferentes colores (rojo, azul, fósforo convertido) se combinan para cumplir con la distribución de energía espectral con alto CRI. Para colimar la luz en los puntos concretos deseados con un ángulo de emisión determinado, se utilizan blancos sintonizables y diversos colores de luz y ópticas secundarias. La combinación de una fuente LED de varios colores con elementos ópticos puede causar falta de homogeneidad cromática en la distribución espacial y angular de la luz, que debe resolverse en el diseño óptico. Sin embargo, no hay necesidad de uniformidad perfecta en el punto de luz debido al umbral en la percepción visual del ojo humano. Por lo tanto, se requiere una descripción matemática del nivel de uniformidad del color con respecto a la percepción visual. Esta tesis está organizada en siete capítulos. Después de un capítulo inicial que presenta la motivación que ha guiado la investigación de esta tesis, en el capítulo 2 se presentan los fundamentos científicos de la uniformidad del color en luces concentradas, como son: el espacio de color aplicado CIELAB, la percepción visual del color, los fundamentos de diseño de focos respecto a los motores de luz y ópticas no formadoras de imágenes, y los últimos avances en la evaluación de la uniformidad del color en el campo de los focos. El capítulo 3 desarrolla diferentes métodos para la descripción matemática de la distribución espacial del color en un área definida, como son la diferencia de color máxima, la desviación media del color, el gradiente de la distribución espacial de color, así como la suavidad radial y axial. Cada función se refiere a los diferentes factores que influyen en la visión, los cuales necesitan un tratamiento distinto que el de los datos que se tendrán en cuenta, además de funciones de ponderación que pre- y post-procesan los datos simulados o medidos para la reducción del ruido, la luminancia de corte, la aplicación de la ponderación de luminancia, la función de sensibilidad de contraste, y la función de distribución acumulativa. En el capítulo 4, se obtiene la función de mérito Usl para la estimación de la uniformidad del color percibida en focos. Se basó en los resultados de dos conjuntos de experimentos con factor humano realizados para evaluar la percepción visual de los sujetos de los patrones de focos típicos. El primer experimento con factor humano dio lugar al orden de importancia percibida de los focos. El orden de rango percibido se utilizó para correlacionar las descripciones matemáticas de las funciones básicas y la función ponderada sobre la distribución espacial del color, que condujo a la función Usl. El segundo experimento con factor humano probó la percepción de los focos bajo condiciones ambientales diversas, con el objetivo de proporcionar una escala absoluta para Usl, para poder así sustituir la opinión subjetiva personal de los individuos por una función de mérito estandarizada. La validación de la función Usl se presenta en relación con el alcance de la aplicación y condiciones, así como las limitaciones y restricciones que se realizan en el capítulo 5. Se compararon los datos medidos y simulados de varios sistemas ópticos. Se discuten los campos de aplicación , así como validaciones y restricciones de la función. El capítulo 6 presenta el diseño del sistema de focos y su optimización. Una evaluación muestra el análisis de sistemas basados en el reflector y la lente TIR. Los sistemas ópticos simulados se comparan en la uniformidad del color Usl, sensibilidad a las sombras coloreadas, eficiencia e intensidad luminosa máxima. Se ha comprobado que no hay un sistema único que obtenga los mejores resultados en todas las categorías, y que una excelente uniformidad de color se pudo alcanzar por la conjunción de dos sistemas diferentes. Finalmente, el capítulo 7 presenta el resumen de esta tesis y la perspectiva para investigar otros aspectos. ABSTRACT Illumination with light-emitting diodes (LED) is more and more replacing traditional light sources. They provide advantages in efficiency, energy consumption, design, size and light quality. For more than 50 years, researchers have been working on LED improvements. Their main relevance for illumination is rapidly increasing. This thesis is focused on one important field of application which are spotlights. They are used to focus light on defined areas, outstanding objects in professional conditions. This high performance illumination required a defined light quality including tunable correlated color temperatures (CCT), high color rendering index (CRI), high efficiencies and bright, vivid colors. Several differently colored chips (red, blue, phosphor converted) in the LED package are combined to meet spectral power distribution with high CRI, tunable white and several light colors and secondary optics are used to collimate the light into the desired narrow spots with defined angle of emission. The combination of multi-color LED source and optical elements may cause chromatic inhomogeneities in spatial and angular light distribution which needs to solved at the optical design. However, there is no need for perfect uniformity in the spot light due to threshold in visual perception of human eye. Therefore, a mathematical description of color uniformity level with regard to visual perception is required. This thesis is organized seven seven chapters. After an initial one presenting the motivation that has guided the research of this thesis, Chapter 2 introduces the scientific basics of color uniformity in spot lights including: the applied color space CIELAB, the visual color perception, the spotlight design fundamentals with regards to light engines and nonimaging optics, and the state of the art for the evaluation of color uniformity in the far field of spotlights. Chapter 3 develops different methods for mathematical description of spatial color distribution in a defined area, which are the maximum color difference, the average color deviation, the gradient of spatial color distribution as well as the radial and axial smoothness. Each function refers to different visual influencing factors, and they need different handling of data be taken into account, along with weighting functions which pre- and post-process the simulated or measured data for noise reduction, luminance cutoff, the implementation of luminance weighting, contrast sensitivity function, and cumulative distribution function. In chapter 4, the merit function Usl for the estimation of the perceived color uniformity in spotlights is derived. It was based on the results of two sets of human factor experiments performed to evaluate the visual perception of typical spotlight patterns by subjects. The first human factor experiment resulted in the perceived rank order of the spotlights. The perceived rank order was used to correlate the mathematical descriptions of basic functions and weighted function concerning the spatial color distribution, which lead to the Usl function. The second human factor experiment tested the perception of spotlights under varied environmental conditions, with to objective to provide an absolute scale for Usl, so the subjective personal opinion of individuals could be replaced by a standardized merit function. The validation of the Usl function is presented concerning the application range and conditions as well as limitations and restrictions in carried out in chapter 5. Measured and simulated data of various optical several systems were compared. Fields of applications are discussed as well as validations and restrictions of the function. Chapter 6 presents spotlight system design and their optimization. An evaluation shows the analysis of reflector-based and TIR lens systems. The simulated optical systems are compared in color uniformity Usl , sensitivity to colored shadows, efficiency, and peak luminous intensity. It has been found that no single system which performed best in all categories, and that excellent color uniformity could be reached by two different system assemblies. Finally, chapter 7 summarizes the conclusions of the present thesis and an outlook for further investigation topics.