Economic analysis of drought risks: an application to irrigated agriculture in Spain

Abstract This paper describes a two-part methodology for managing the risk posed by water supply variability to irrigated agriculture. First, an econometric model is used to explain the variation in the production value of irrigated agriculture. The explanatory variables include an index of irrigation water availability (surface storage levels), a price index representative of the crops grown in each geographical unit, and a time variable. The model corrects for autocorrelation and it is applied to 16 representative Spanish provinces in terms of irrigated agriculture. In the second part, the fitted models are used for the economic evaluation of drought risk. In flow variability in the hydrological system servicing each province is used to perform ex-ante evaluations of economic output for the upcoming irrigation season. The model?s error and the probability distribution functions (PDFs) of the reservoirs? storage variations are used to generate Monte Carlo (Latin Hypercube) simulations of agricultural output 7 and 3 months prior to the irrigation season. The results of these simulations illustrate the different risk profiles of each management unit, which depend on farm productivity and on the probability distribution function of water in flow to reservoirs. The potential for ex-ante drought impact assessments is demonstrated. By complementing hydrological models, this method can assist water managers and decisionmakers in managing reservoirs.

Economic analysis of the renewable energy policies in the European Union

The European energy sector is undergoing a major transformation and is facing a series of difficult challenges. These include a high and increasing dependence on external energy resources; dramatically reduce the need for the emissions of greenhouse gases to meet environmental objectives and the difficulties related to the promotion of energy market effectively integrated and competitive. Some of the policies associated with the various objectives are sometimes in conflict with each other, while in other cases are mutually reinforcing.The aim of this paper is to do a scienti?c analysis of the developments so far and the expectations for the coming period focusing on the pillars of energy policy in the EU in terms of security of supply, environment, climate change and promoting a competitive and integrated market. The use of renewable energy sources is seen as a key element of European energy policy and should help to: reduce dependence on fuel from non-member countries; reduce emissions from carbon-based energy sources, and; decouple energy costs from oil prices.

Analysis of advanced European nuclear fuel cycle scenarios including transmutation and economic estimates

Four European fuel cycle scenarios involving transmutation options (in coherence with PATEROS and CPESFR EU projects) have been addressed from a point of view of resources utilization and economic estimates. Scenarios include: (i) the current fleet using Light Water Reactor (LWR) technology and open fuel cycle, (ii) full replacement of the initial fleet with Fast Reactors (FR) burning U?Pu MOX fuel, (iii) closed fuel cycle with Minor Actinide (MA) transmutation in a fraction of the FR fleet, and (iv) closed fuel cycle with MA transmutation in dedicated Accelerator Driven Systems (ADS). All scenarios consider an intermediate period of GEN-III+ LWR deployment and they extend for 200 years, looking for long term equilibrium mass flow achievement. The simulations were made using the TR_EVOL code, capable to assess the management of the nuclear mass streams in the scenario as well as economics for the estimation of the levelized cost of electricity (LCOE) and other costs. Results reveal that all scenarios are feasible according to nuclear resources demand (natural and depleted U, and Pu). Additionally, we have found as expected that the FR scenario reduces considerably the Pu inventory in repositories compared to the reference scenario. The elimination of the LWR MA legacy requires a maximum of 55% fraction (i.e., a peak value of 44 FR units) of the FR fleet dedicated to transmutation (MA in MOX fuel, homogeneous transmutation) or an average of 28 units of ADS plants (i.e., a peak value of 51 ADS units). Regarding the economic analysis, the main usefulness of the provided economic results is for relative comparison of scenarios and breakdown of LCOE contributors rather than provision of absolute values, as technological readiness levels are low for most of the advanced fuel cycle stages. The obtained estimations show an increase of LCOE ? averaged over the whole period ? with respect to the reference open cycle scenario of 20% for Pu management scenario and around 35% for both transmutation scenarios. The main contribution to LCOE is the capital costs of new facilities, quantified between 60% and 69% depending on the scenario. An uncertainty analysis is provided around assumed low and high values of processes and technologies.

An example of integration between en economic and an hydrologic model in the framework of water resource management problems

Growing scarcity, increasing demand and bad management of water resources are causing weighty competition for water and consequently managers are facing more and more pressure in an attempt to satisfy users? requirement. In many regions agriculture is one of the most important users at river basin scale since it concentrates high volumes of water consumption during relatively short periods (irrigation season), with a significant economic, social and environmental impact. The interdisciplinary characteristics of related water resources problems require, as established in the Water Framework Directive 2000/60/EC, an integrated and participative approach to water management and assigns an essential role to economic analysis as a decision support tool. For this reason, a methodology is developed to analyse the economic and environmental implications of water resource management under different scenarios, with a focus on the agricultural sector. This research integrates both economic and hydrologic components in modelling, defining scenarios of water resource management with the goal of preventing critical situations, such as droughts. The model follows the Positive Mathematical Programming (PMP) approach, an innovative methodology successfully used for agricultural policy analysis in the last decade and also applied in several analyses regarding water use in agriculture. This approach has, among others, the very important capability of perfectly calibrating the baseline scenario using a very limited database. However one important disadvantage is its limited capacity to simulate activities non-observed during the reference period but which could be adopted if the scenario changed. To overcome this problem the classical methodology is extended in order to simulate a more realistic farmers? response to new agricultural policies or modified water availability. In this way an economic model has been developed to reproduce the farmers? behaviour within two irrigation districts in the Tiber High Valley. This economic model is then integrated with SIMBAT, an hydrologic model developed for the Tiber basin which allows to simulate the balance between the water volumes available at the Montedoglio dam and the water volumes required by the various irrigation users.

Providing 30Mbit/s to Spain’s final third. -A techno-economic assessment.

Since the Digital Agenda for Europe released the Europe2020 flagship, Member States are looking for ways of fulfilling their agreed commitments to fast and ultrafast internet deployment. However, Europe is not a homogenous reality. The economic, geographic, social and demographic features of each country make it a highly diverse region to develop best practices over Next Generation Access Networks (NGAN) deployments. There are special concerns about NGAN deployments for “the final third”, as referred to the last 25% of the country’s population who, usually, live in rural areas. This paper assesses, through a techno-economic analysis, the access cost of providing over 30 Mbps broadband for the final third of Spain`s population in municipalities, which are classified into area types, referred to as geotypes. Fixed and mobile technologies are compared in order to determine which is the most cost-effective technology for each geotype. The demographic limit for fixed networks (cable, fibre and copper) is also discussed. The assessment focuses on the supply side and the results show the access network cost only. The research completes a previous published assessment (Techno-economic analysis of next generation access networks roll-out. The case of platform competition, regulation and public policy in Spain) by including the LTE scenario. The LTE scenario is dimensioned to provide 30 Mbps (best effort) broadband, considering a network take-up of 25%. The Rocket techno-economic model is used to assess a ten-year study period deployment. Nevertheless, the deployment must start in 2014 and be completed by 2020, in order to fulfil the Digital Agenda’s goals. The feasibility of the deployment is defined as the ability to recoup the investment at the end of the study period. This ability is highly related to network take-up and, therefore, to service adoption. Network deployment in each geotype is compared with the cost of the deployment in the Urban geotype and broadband expected penetration rates for clarity and simplicity. Debating the cost-effective deployments for each geotype, while addressing the Digital Agenda’s goals regarding fast and ultrafast internet, is the main purpose of this paper. At the end of the last year, the independent Spanish regulation agency released the Spain broadband coverage report at the first half of 2013. This document claimed that 59% and 52% of Spain’s population was already covered by NGAN capable of providing 30 Mbps and 100 Mbps broadband respectively. HFC, with 47% of population coverage, and FTTH, with 14%, were considered as a 100 Mbps capable NGAN. Meanwhile VDSL, with 12% of the population covered, was the only NGAN network considered for the 30 Mbps segment. Despite not being an NGAN, the 99% population coverage of HSPA networks was also noted in the report. Since mobile operators are also required to provide 30 Mbps broadband to 90% of the population in rural areas by the end of 2020, mobile networks will play a significant role on the achievement of the 30 Mbps goal in Spain’s final third. The assessment indicates the cost of the deployment per cumulative households coverage with 4 different NGANs: FTTH, HFC, VDSL and LTE. Research shows that an investment ranging from €2,700 (VDSL) to €5,400 (HFC) million will be needed to cover the first half of the population with any fixed technology assessed. The results state that at least €3,000 million will be required to cover these areas with the least expensive technology (LTE). However, if we consider the throughput that fixed networks could provide and achievement of the Digital Agenda’s objectives, fixed network deployments are recommended for up to 90% of the population. Fibre and cable deployments could cover up to a maximum of 88% of the Spanish population cost efficiently. As there are some concerns about the service adoption, we recommend VDSL and mobile network deployments for the final third of the population. Despite LTE being able to provide the most economical roll-out, VDSL could also provide 50 Mbps from 75% to 90% of the Spanish population cost efficiently. For this population gap, facility based competition between VDSL providers and LTE providers must be encouraged. Regarding 90% to 98.5% of the Spanish population, LTE deployment is the most appropriate. Since costumers in less populated the municipalities are more sensitive to the cost of the service, we consider that a single network deployment could be most appropriate. Finally, it has become clear that it is not possible to deliver 30Mbps to the final 1.5% of the population cost-efficiently and adoption predictions are not optimistic either. As there are other broadband alternatives able to deliver up to 20 Mbps, in the authors’ opinion, it is not necessary to cover the extreme rural areas, where public financing would be required.

Exploring the economic value of personal information from firms' financial statements

Currently personal data gathering in online markets is done on a far larger scale and much cheaper and faster than ever before. Within this scenario, a number of highly relevant companies for whom personal data is the key factor of production have emerged. However, up to now, the corresponding economic analysis has been restricted primarily to a qualitative perspective linked to privacy issues. Precisely, this paper seeks to shed light on the quantitative perspective, approximating the value of personal information for those companies that base their business model on this new type of asset. In the absence of any systematic research or methodology on the subject, an ad hoc procedure is developed in this paper. It starts with the examination of the accounts of a number of key players in online markets. This inspection first aims to determine whether the value of personal information databases is somehow reflected in the firms’ books, and second to define performance measures able to capture this value. After discussing the strengths and weaknesses of possible approaches, the method that performs best under several criteria (revenue per data record) is selected. From here, an estimation of the net present value of personal data is derived, as well as a slight digression into regional differences in the economic value of personal information.

Propuesta metodológica para la identificación de medidas de adaptación al cambio climático en sistemas de recursos hídricos

Esta tesis realiza una contribución metodológica en el estudio de medidas de adaptación potencialmente adecuadas a largo plazo, donde los sistemas de recursos hídricos experimentan fuertes presiones debido a los efectos del cambio climático. Esta metodología integra el análisis físico del sistema, basándose en el uso de indicadores que valoran el comportamiento de éste, y el análisis económico mediante el uso del valor del agua. El procedimiento metodológico inicia con la construcción de un conjunto de escenarios futuros, que capturan por un lado las características de variabilidad de las aportaciones de diversos modelos climáticos y, por otro, las características hidrológicas de la zona de estudio. Las zonas de estudio seleccionadas fueron las cuencas del Guadalquivir, Duero y Ebro y se utilizaron como datos observados las series de escorrentía en régimen natural estimadas por el modelo SIMPA que está calibrado en la totalidad del territorio español. Estas series observadas corresponden al periodo 1961-1990. Los escenarios futuros construidos representan el periodo 2071-2100. La identificación de medidas de adaptación se apoyó en el uso de indicadores que sean capaces de caracterizar el comportamiento de un sistema de recursos hídricos frente a los efectos del cambio climático. Para ello se seleccionaron los indicadores de calidad de servicio (I1) y de confiabilidad de la demanda (I2) propuestos por Martin-Carrasco et al. (2012). Estos indicadores valoran el comportamiento de un sistema mediante la identificación de los problemas de escasez de agua que presente, y requieren para su cuantificación el uso de un modelo de optimización. Para este estudio se ha trabajado con el modelo de optimización OPTIGES. La determinación de estos indicadores fue realizada para análisis a corto plazo donde los efectos del cambio climático no son de relevancia, por lo que fue necesario analizar su capacidad para ser usados en sistemas afectados por dichos efectos. Para este análisis se seleccionaron tres cuencas españolas: Guadalquivir, Duero y Ebro, determinándose que I2 no es adecuado para este tipo de escenarios. Por ello se propuso un nuevo indicador “Indicador de calidad de servicio bajo cambio climático” (I2p) que mantiene los mismos criterios de valoración que I2 pero que responde mejor bajo fuertes reducciones de aportaciones producto del cambio climático. La metodología propuesta para la identificación de medidas de adaptación se basa en un proceso iterativo en el cual se van afectando diversos elementos que conforman el esquema del sistema bajo acciones de gestión previamente identificadas, hasta llegar a un comportamiento óptimo dado por el gestor. Las mejoras de estas afectaciones son cuantificadas mediante los indicadores I1 e I2p, y de este conjunto de valores se selecciona la que se acerca más al comportamiento óptimo. Debido a la extensa cantidad de información manejada en este análisis, se desarrolló una herramienta de cálculo automatizada en Matlab. El proceso seguido por esta herramienta es: (i) Ejecución del modelo OPTIGES para las diferentes modificaciones por acciones de gestión; (ii) Cálculo de los valores de I1 e I2p para cada una de estas afectaciones; y (iii) Selección de la mejor opción. Este proceso se repite hasta llegar al comportamiento óptimo buscado, permitiendo la identificación de las medidas de adaptación mas adecuadas. La aplicación de la metodología para la identificación de medidas de adaptación se realizó en la cuenca del Guadalquivir, por ser de las tres cuencas analizadas bajo los indicadores I1 e I2p la que presenta los problemas más serios de escasez de agua. Para la identificación de medidas de adaptación se analizaron dos acciones de gestión: 1) incremento de los volúmenes de regulación y 2) reducción de las demandas de riego, primero bajo la valoración del comportamiento físico del sistema (análisis de sensibilidad) permitiendo identificar que la primera acción de gestión no genera cambios importantes en el comportamiento del sistema, que si se presentan bajo la segunda acción. Posteriormente, con la acción que genera cambios importantes en el comportamiento del sistema (segunda acción) se identificaron las medidas de adaptación más adecuadas, mediante el análisis físico y económico del sistema. Se concluyó que en la cuenca del Guadalquivir, la acción de reducción de las demandas de riego permite minimizar e incluso eliminar los problemas de escasez de agua que se presentarían a futuro bajo diferentes proyecciones hidrológicas, aunque estas mejoras implicarían fuertes reducciones en dichas demandas. Siendo las demandas más afectadas aquellas ubicadas en cabecera de cuenca. Los criterios para la reducción de las demandas se encuentran en función de las productividades y garantías con las que son atendidas dichas demandas. This thesis makes a methodological contribution to the study of potentially suitable adaptation measures in the long term, where water resource systems undergo strong pressure due to the effects of climate change. This methodology integrates the physical analysis of the system, by the use of indicators which assess its behavior, and the economic analysis by the use of the value of water. The methodological procedure begins with the building of a set of future scenarios that capture, by one hand, the characteristics and variability of the streamflow of various climate models and, on the other hand, the hydrological characteristics of the study area. The study areas chosen were the Guadalquivir, Ebro and Duero basins, and as observed data where used runoff series in natural regimen estimated by the SIMPA model, which is calibrated in the whole Spanish territory. The observed series are for the 1961-1990 period. The future scenarios built represent the 2071-2100 periods. The identification of adaptation measures relied on the use of indicators that were able of characterize the behavior of one water resource system facing the effects of climate change. Because of that, the Demand Satisfaction Index (I1) and the Demand Reliability Index (I2) proposed by Martin-Carrasco et al. (2012) were selected. These indicators assess the behavior of a system by identifying the water scarcity problems that it presents, and require in order to be quantified the use of one optimization model. For this study the OPTIGES optimization model has been used. The determination of the indicators was made for the short-term analysis where the climates change effect are not relevant, so it was necessary to analyze their capability to be used in systems affected by those these. For this analysis three Spanish basins were selected: Guadalquivir, Duero and Ebro. It was determined that the indicator I2 is not suitable for this type of scenario. It was proposed a new indicator called “Demand Reliability Index under climate change” (I2p), which keeps the same assessment criteria than I2, but responsive under heavy reductions of streamflow due to climate change. The proposed methodology for identifying adaptation measures is based on an iterative process, in which the different elements of the system´s schema are affected by previously defined management actions, until reach an optimal behavior given by the manager. The improvements of affectations are measured by indicators I1 e I2p, and from this set of values it is selected the affectation that is closer to the optimal behavior. Due to the large amount of information managed in this analysis, it was developed an automatic calculation tool in Matlab. The process followed by this tool is: Firstly, it executes the OPTIGES model for the different modifications by management actions; secondly, it calculates the values of I1 e I2p for each of these affectations; and finally it chooses the best option. This process is performed for the different iterations that are required until reach the optimal behavior, allowing to identify the most appropriate adaptation measured. The application of the methodology for the identification of adaptation measures was conducted in the Guadalquivir basin, due to this was from the three basins analyzed under the indicators I1 e I2p, which presents the most serious problems of water scarcity. For the identification of adaptation measures there were analyzed two management actions: 1) To increase the regulation volumes, and 2) to reduce the irrigation demands, first under the assessment of the physical behavior of the system (sensibility analysis), allowing to identify that the first management action does not generate significant changes in the system´s behavior, which there are present under the second management action. Afterwards, with the management action that generates significant changes in the system´s behavior (second management action), there were identified the most adequate adaptation measures, through the physical and economic analysis of the system. It was concluded that in the Guadalquivir basin, the action of reduction of irrigation demands allows to minimize or even eliminate the water scarcity problems that could exist in the future under different hydrologic projections, although this improvements should involve strong reductions of the irrigation demands. Being the most affected demands those located in basins head. The criteria for reducing the demands are based on the productivities and reliabilities with which such demands are meet.

Dimensionamiento del proceso de licuación de una planta de gas natural Offshore

Este proyecto consiste en el dimensionamiento del proceso de licuación de una planta offshore para la producción de gas natural licuado, usando únicamente N2 como refrigerante, evitando de este modo riesgos potenciales que podrían surgir con el uso de refrigerantes mixtos compuestos de hidrocarburos. El proceso ha sido diseñado para acomodar 35,23 kg/s (aproximadamente un millón de toneladas por año) de gas natural seco, sin separación de gases licuados de petróleo (GLP) y ajustarlo dentro de los parámetros requeridos en las especificaciones del proceso. Para proceder al dimensionamiento del proceso de licuación de gas natural de la planta se ha empleado el programa Aspen Plus. Los sistemas floating production, storage and offloading para licuar el gas natural (LNG-FPSO), es una nueva unidad conceptual y un modo realista y efectivo para la explotación, recuperación, almacenamiento, transporte y agotamiento de los campos marginales de gas y las fuentes de gas asociadas offshore. En el proyecto se detalla el proceso, equipos necesarios y costes estimados, potencia aproximada requerida y un breve análisis económico. ABSTRACT This project consist of the dimensioning of a liquefaction process in an offshore plant to produce liquefied natural, using only N2 as refrigerant in the cooling cycles to avoid potential hazards of mixed hydrocarbon refrigerants. The process was designed to accommodate 35.23 kg/s (roughly 1 MTPA) of raw natural gas feed without separation of LPG, and fits within all parameters required in the process specifications. The plant has been designed with the computer tool Aspen Plus. The floating production, storage and offloading system for liquefied natural gas (LNGFPSO), is a new conceptual unit and an effective and realistic way for exploitation, recovery, storage, transportation and end-use applications of marginal gas fields and offshore associated-gas resources. The following report details the process, equipment needs and estimated costs, approximated power requirements, and a brief economic analysis.

Información personal: la nueva moneda de la economía digital

Technological progress has profoundly changed the way personal data are collected, accessed and used. Those data make possible unprecedented customization of advertising which, in turn, is the business model adopted by many of the most successful Internet companies. Yet measuring the value being generated is still a complex task. This paper presents a review of the literature on this subject. It has been found that the economic analysis of personal information has been conducted up to now from a qualitative perspective mainly linked to privacy issues. A better understanding of a quantitative approach to this topic is urgently needed.

Pre-diseño de una instalación mixta fotovoltaica-térmica para una vivienda

El objetivo del presente proyecto es realizar el pre-diseño de una instalación solar mixta fotovoltaica-térmica para satisfacer la demanda eléctrica para iluminación y para parte de las necesidades de energía térmica para agua caliente de una vivienda. El proyecto define las condiciones técnicas de la instalación a partir de la radiación solar registrada en la localización elegida. Además de incluir el estudio económico y los planos correspondientes que indican la viabilidad del mismo. Como puntos a destacar en el proyecto, se puede tomar los datos obtenidos de generación eléctrica y térmica, la viabilidad técnica y económica y el análisis de la incipiente tecnología de paneles híbridos fotovoltaicos-térmicos. La incorporación de las energías renovables es ya una realidad para las viviendas de nueva construcción, en cambio son pocas las nuevas instalaciones en edificios o viviendas ya construidas. Es importante promover este tipo de tecnologías con objetivo de reducir la dependencia actual de los combustibles fósiles y evitar así sus efectos nocivos al medio ambiente. ABSTRACT The purpose of this project is to carry out the draft design of a solar mixed photovoltaic-thermal installation to satisfy the electrical and thermal demand in a building, for lighting as well as for some of the energy required for water heating. The project defines the technical conditions of the system, given the solar radiation registered in the chosen location. It also includes the economic analysis and the respective plans that indicates the viability of the project. The highlights of the project are the following: electricity and thermal energy generation data, the technical and financial viability and the analysis of the new technology of the Photovoltaic-Thermal hybrid solar collectors. The inclusion of renewable energies is already a living reality for newly constructed buildings. By contrast, they are rarely implemented in old buildings. In order to be able to reduce the fossil fuels dependency, and in doing so, avoid its damaging effects on the environment, it is very important to promote the use of these cleaner technologies.

Distributed control strategies for photovoltaic systems in urban environments

Este trabajo es una contribución a los sistemas fotovoltaicos (FV) con seguimiento distribuido del punto de máxima potencia (DMPPT), una topología que se caracteriza porque lleva a cabo el MPPT a nivel de módulo, al contrario de las topologías más tradicionales que llevan a cabo el MPPT para un número más elevado de módulos, pudiendo ser hasta cientos de módulos. Las dos tecnologías DMPPT que existen en el mercado son conocidos como microinversores y optimizadores de potencia, y ofrecen ciertas ventajas sobre sistemas de MPPT central como: mayor producción en situaciones de mismatch, monitorización individual de cada módulo, flexibilidad de diseño, mayor seguridad del sistema, etc. Aunque los sistemas DMPPT no están limitados a los entornos urbanos, se ha enfatizado en el título ya que es su mercado natural, siendo difícil una justificación de su sobrecoste en grandes huertas solares en suelo. Desde el año 2010 el mercado de estos sistemas ha incrementado notablemente y sigue creciendo de una forma continuada. Sin embargo, todavía falta un conocimiento profundo de cómo funcionan estos sistemas, especialmente en el caso de los optimizadores de potencia, de las ganancias energéticas esperables en condiciones de mismatch y de las posibilidades avanzadas de diagnóstico de fallos. El principal objetivo de esta tesis es presentar un estudio completo de cómo funcionan los sistemas DMPPT, sus límites y sus ventajas, así como experimentos varios que verifican la teoría y el desarrollo de herramientas para valorar las ventajas de utilizar DMPPT en cada instalación. Las ecuaciones que modelan el funcionamiento de los sistemas FVs con optimizadores de potencia se han desarrollado y utilizado para resaltar los límites de los mismos a la hora de resolver ciertas situaciones de mismatch. Se presenta un estudio profundo sobre el efecto de las sombras en los sistemas FVs: en la curva I-V y en los algoritmos MPPT. Se han llevado a cabo experimentos sobre el funcionamiento de los algoritmos MPPT en situaciones de sombreado, señalando su ineficiencia en estas situaciones. Un análisis de la ventaja del uso de DMPPT frente a los puntos calientes es presentado y verificado. También se presenta un análisis sobre las posibles ganancias en potencia y energía con el uso de DMPPT en condiciones de sombreado y este también es verificado experimentalmente, así como un breve estudio de su viabilidad económica. Para ayudar a llevar a cabo todos los análisis y experimentos descritos previamente se han desarrollado una serie de herramientas software. Una siendo un programa en LabView para controlar un simulador solar y almacenar las medidas. También se ha desarrollado un programa que simula curvas I-V de módulos y generador FVs afectados por sombras y este se ha verificado experimentalmente. Este mismo programa se ha utilizado para desarrollar un programa todavía más completo que estima las pérdidas anuales y las ganancias obtenidas con DMPPT en instalaciones FVs afectadas por sombras. Finalmente, se han desarrollado y verificado unos algoritmos para diagnosticar fallos en sistemas FVs con DMPPT. Esta herramienta puede diagnosticar los siguientes fallos: sombras debido a objetos fijos (con estimación de la distancia al objeto), suciedad localizada, suciedad general, posible punto caliente, degradación de módulos y pérdidas en el cableado de DC. Además, alerta al usuario de las pérdidas producidas por cada fallo y no requiere del uso de sensores de irradiancia y temperatura. ABSTRACT This work is a contribution to photovoltaic (PV) systems with distributed maximum power point tracking (DMPPT), a system topology characterized by performing the MPPT at module level, instead of the more traditional topologies which perform MPPT for a larger number of modules. The two DMPPT technologies available at the moment are known as microinverters and power optimizers, also known as module level power electronics (MLPE), and they provide certain advantages over central MPPT systems like: higher energy production in mismatch situations, monitoring of each individual module, system design flexibility, higher system safety, etc. Although DMPPT is not limited to urban environments, it has been emphasized in the title as it is their natural market, since in large ground-mounted PV plants the extra cost is difficult to justify. Since 2010 MLPE have increased their market share steadily and continuing to grow steadily. However, there still lacks a profound understanding of how they work, especially in the case of power optimizers, the achievable energy gains with their use and the possibilities in failure diagnosis. The main objective of this thesis is to provide a complete understanding of DMPPT technologies: how they function, their limitations and their advantages. A series of equations used to model PV arrays with power optimizers have been derived and used to point out limitations in solving certain mismatch situation. Because one of the most emphasized benefits of DMPPT is their ability to mitigate shading losses, an extensive study on the effects of shadows on PV systems is presented; both on the I-V curve and on MPPT algorithms. Experimental tests have been performed on the MPPT algorithms of central inverters and MLPE, highlighting their inefficiency in I-V curves with local maxima. An analysis of the possible mitigation of hot-spots with DMPPT is discussed and experimentally verified. And a theoretical analysis of the possible power and energy gains is presented as well as experiments in real PV systems. A short economic analysis of the benefits of DMPPT has also been performed. In order to aide in the previous task, a program which simulates I-V curves under shaded conditions has been developed and experimentally verified. This same program has been used to develop a software tool especially designed for PV systems affected by shading, which estimates the losses due to shading and the energy gains obtained with DMPPT. Finally, a set of algorithms for diagnosing system faults in PV systems with DMPPT has been developed and experimentally verified. The tool can diagnose the following failures: fixed object shading (with distance estimation), localized dirt, generalized dirt, possible hot-spots, module degradation and excessive losses in DC cables. In addition, it alerts the user of the power losses produced by each failure and classifies the failures by their severity and it does not require the use of irradiance or temperature sensors.

Modelización de una central térmica supercrítica de 700 MW con captura de CO₂

El objetivo de este proyecto es realizar la simulación de una central térmica supercrítica de 700 MW con captura de CO₂ para producir electricidad y verterla a la red. El proyecto describe los equipos e instalaciones de la central y define los balances técnicos de la misma, probando que es viable técnicamente la incorporación de una planta de captura de CO₂ a una central térmica, a pesar del bajo rendimiento de la central. Además incluye el estudio económico que indica la viabilidad económica del proyecto, aunque con una rentabilidad baja. Este proyecto mira hacia el futuro debido a la necesidad de reducir las emisiones contaminantes, ya de casi la misma importancia que generar electricidad, y demuestra que es posible generar una energía limpia en centrales de carbón. ABSTRACT The purpose of this project is to carry out the simulation of a 700 MW supercritical coal thermal power plant with CO₂ capture to produce electricity and send it to the grid. The project describes the equipment, the installations and defines technical balances of the power plant. It shows that a CO₂ capture plant in a coal power plant is technically possible, in spite of the low power plant efficiency. In addition, it includes the economic analysis that shows the economic viability of the project, with a low profitability. This project looks into the future due to the need of reducing the pollutant emissions, which are almost as important as the generation of electricity, and demonstrates that a green energy in coal power plants is possible.

Proyecto de mejora de instalaciones de calefacción, ACS y envolvente térmica de un edificio existente

En este escrito se pretende llevar a cabo la realización de un proyecto técnico sobre eficiencia energética en edificios. El proyecto comienza con el estudio de la demanda térmica de un edificio, es decir, de sus necesidades de calefacción, refrigeración y agua caliente sanitaria (ACS). Una vez realizado este análisis, se procede al estudio de distintas alternativas para la disminución del coste asociado al consumo energético del edificio, las cuales son: mejora del aislamiento de la envolvente térmica del edificio, instalación de colectores solares para la producción de ACS y el cambio de los quemadores de las calderas. De estas medidas se han presupuestado aquellas que poseen un bajo periodo de retorno de la inversión, y se ha desarrollado su planificación, programación temporal y análisis económico. ABSTRACT In this document is pretended to be carry out the performance of a technical project about energy efficiency in buildings. The project begins with the study of the thermal demand of the building, that is to say, the heating, cooling and domestic hot water (DHW) needs. Once the analysis has been done, is proceeded the study of different alternatives for diminishing the cost associate to the building energy consumption, which are: improvement of the insulation of the building, solar collector installation to produce DHW and change of the burner of the boilers. Among this measures, has been budgeted the ones that possess a low invest pay-back, and it is been developed their planning, their temporal programming and their economic analysis.

Diseño de sistema de pitch pasivo para aerogeneradores en entornos urbanos

El presente proyecto desarrolla el diseño de un sistema de pitch pasivo para aerogeneradores en entornos urbanos en el marco del proyecto SWIP (Soluciones, componentes y herramientas novedosos e innovadores para la integración de la energía eólica en áreas urbanas y suburbanas) En primer lugar se describe el marco de trabajo así como una introducción teórica de energía eólica y de sistemas de pitch o de control de paso de pala. Aquí son presentados los fundamentos del accionamiento del pitch pasivo diseñado. A continuación se presenta el mecanismo diseñado y los cálculos sobre él efectuados para el ajuste de sus parámetros de funcionamiento. Posteriormente se plantea el análisis estructural de los distintos casos de carga a los que estará sometido y el estudio de su respuesta dinámica a perturbaciones reales con las que trabajará durante su funcionamiento normal. Por último, se aclaran otra serie de factores como la seguridad y el sobredimensionamiento del generador y se hace un análisis económico del diseño junto con una comparativa con las tecnologías alternativas existentes. ABSTRACT The present project develops the design of a passive pitch system for wind turbines for urban and sub-urban areas for the SWIP European Project (New innovative solutions, components and tools for the integration of wind energy in urban and peri-urban áreas) Firstly, the framework is described, as well as a theoretical introduction to wind energy and pitch systems. Here, the principles of the designed passive pitch mechanism are presented. Subsequently, the designed mechanism is presented together with the calculations on it for the adjustment of its working parameters. After that, the structural analyses for the different load cases that will affect the design are studied. Afterwards, the dynamic response of the system to real perturbations during its operation is studied. Finally, some concepts concerning security issues or oversizing of the electric generator are considered and an economic analysis is performed for the design and also to compare it with the alternative existing technologies.

Extracción de energía del agua mediante generadores piezoeléctricos

El desarrollo del Proyecto consiste, por una parte, en el estudio sobre la respuesta de los materiales piezoeléctricos como generadores de energía en un entorno acuoso que está sometido a variaciones de potencial y, por otra, en el estudio técnico y económico de un equipo basado en la utilización esta fuente de energía y su comercialización en el mercado energético. Esta energía es la que se obtiene de la fuerza de arrastre del agua al desplazarse a causa del movimiento ondulatorio de las olas y que el elemento al flexionar es capaz de transformar. El proyecto contempla a partir de modelos, el funcionamiento eléctrico y mecánico de un generador piezoeléctrico, el sistema de electrónica necesaria para su inserción optimizada en la red eléctrica. A partir de esto se desarrolla una instalación que puede adaptarse a los requerimientos del estudio previo. Empleando un modelo de relación técnica y económica se establece una conexión entre estas dos secciones para hacerse una idea de la rentabilidad económica de un equipo de este estilo a día de hoy. El propósito final, es el de estudiar un nuevo tipo de energía, y comenzar una línea que puede llevar a un lugar muy interesante del sector energético. ABSTRACT This Project presents an analysis on the performance of piezoelectric materials as energy producer in an aquatic environment subject to potential variations. Additionally, the Project contains a technical and an economic analysis on the equipment based on the use of this energy source, as well as its commercialization. Energy is obtained by the water drag force when it is moved by the wave’s movement and by its transformation by the piezoelectric material. The Project studies the electric and mechanic functioning of a piezoelectric generator and the necessary electronic system for its optimized insertion on the electricity distribution network. Based on this, it is developed a system that can be adapted to the previous study requirements. The use of a technical and economic relation model allows the establishment of a connection among them in order to estimate the economic profitability of such equipment nowadays. The final objective of this Project is analyzing a new source of energy, which could start a new investigation line that may lead the energetic sector to a very interesting future.