Reduction of truncation errors in planar, cylindrical and partial spherical near-field antenna measurements

A method to reduce truncation errors in near-field antenna measurements is presented. The method is based on the Gerchberg-Papoulis iterative algorithm used to extrapolate band-limited functions and it is able to extend the valid region of the calculated far-field pattern up to the whole forward hemisphere. The extension of the valid region is achieved by the iterative application of a transformation between two different domains. After each transformation, a filtering process that is based on known information at each domain is applied. The first domain is the spectral domain in which the plane wave spectrum (PWS) is reliable only within a known region. The second domain is the field distribution over the antenna under test (AUT) plane in which the desired field is assumed to be concentrated on the antenna aperture. The method can be applied to any scanning geometry, but in this paper, only the planar, cylindrical, and partial spherical near-field measurements are considered. Several simulation and measurement examples are presented to verify the effectiveness of the method.

Correction of systematic errors in Wide Area Multilateration

This work presents a method to estimate and correct slow time-dependent position errors due to non perfect ground station synchronization and tropospheric propagation. It uses opportunity traffic emissions, i.e. signals transmitted from the aircrafts within the coverage zone. This method is used to overcome the difficulty of installing reference beacons simultaneously visible by all the base stations in a given Wide Area Multilateration (WAM) system.

A New Method to Reduce Truncation Errors in Partial Spherical Near-Field Measurements

A new and effective method for reduction of truncation errors in partial spherical near-field (SNF) measurements is proposed. The method is useful when measuring electrically large antennas, where the measurement time with the classical SNF technique is prohibitively long and an acquisition over the whole spherical surface is not practical. Therefore, to reduce the data acquisition time, partial sphere measurement is usually made, taking samples over a portion of the spherical surface in the direction of the main beam. But in this case, the radiation pattern is not known outside the measured angular sector as well as a truncation error is present in the calculated far-field pattern within this sector. The method is based on the Gerchberg-Papoulis algorithm used to extrapolate functions and it is able to extend the valid region of the calculated far-field pattern up to the whole forward hemisphere. To verify the effectiveness of the method, several examples are presented using both simulated and measured truncated near-field data.

New methods to reduce leakage errors in planar near-field measurements

This paper describes two methods to cancel the effect of two kinds of leakage signals which may be presented when an antenna is measured in a planar near-field range. One method tries to reduce leakage bias errors from the receiver¿s quadrature detector and it is based on estimating the bias constant added to every near-field data sample. Then, that constant is subtracted from the data, removing its undesired effect on the far-field pattern. The estimation is performed by back-propagating the field from the scan plane to the antenna under test plane (AUT) and averaging all the data located outside the AUT aperture. The second method is able to cancel the effect of the leakage from faulty transmission lines, connectors or rotary joints. The basis of this method is also a reconstruction process to determine the field distribution on the AUT plane. Once this distribution is known, a spatial filtering is applied to cancel the contribution due to those faulty elements. After that, a near-field-to-far-field transformation is applied, obtaining a new radiation pattern where the leakage effects have disappeared. To verify the effectiveness of both methods, several examples are presented.

Subjective Evaluation of Transmission Errors in IPTV and 3DTV

The increase of multimedia services delivered over packet-based networks has entailed greater quality expectations of the end-users. This has led to an intensive research on techniques for evaluating the quality of experience perceived by the viewers of audiovisual content, considering the different degradations that it could suffer along the broadcasting system. In this paper, a comprehensive study of the impact of transmission errors affecting video and audio in IPTV is presented. With this aim, subjective assessment tests were carried out proposing a novel methodology trying to keep as close as possible home environment viewing conditions. Also 3DTV content in side-by-side format has been used in the experiments to compare the impact of the degradations. The results provide a better understanding of the effects of transmission errors, and show that the QoE related to the first approach of 3DTV is acceptable, but the visual discomfort that it causes should be reduced.

Subjective assessment of the impact of transmission errors in 3DTV compared to HDTV

Recently, broadcasted 3D video content has reached households with the first generation of 3DTV. However, few studies have been done to analyze the Quality of Experience (QoE) perceived by the end-users in this scenario. This paper studies the impact of trans- mission errors in 3DTV, considering that the video is delivered in side-by-side format over a conventional packet-based network. For this purpose, a novel evaluation methodology based on standard sin- gle stimulus methods and with the aim of keeping as close as pos- sible the home environment viewing conditions has been proposed. The effects of packet losses in monoscopic and stereoscopic videos are compared from the results of subjective assessment tests. Other aspects were also measured concerning 3D content as naturalness, sense of presence and visual fatigue. The results show that although the final perceived QoE is acceptable, some errors cause important binocular rivalry, and therefore, substantial visual discomfort.

Analyzing Query Success and User Context

This paper describes the participation of DAEDALUS at the LogCLEF lab in CLEF 2011. This year, the objectives of our participation are twofold. The first topic is to analyze if there is any measurable effect on the success of the search queries if the native language and the interface language chosen by the user are different. The idea is to determine if this difference may condition the way in which the user interacts with the search application. The second topic is to analyze the user context and his/her interaction with the system in the case of successful queries, to discover out any relation among the user native language, the language of the resource involved and the interaction strategy adopted by the user to find out such resource. Only 6.89% of queries are successful out of the 628,607 queries in the 320,001 sessions with at least one search query in the log. The main conclusion that can be drawn is that, in general for all languages, whether the native language matches the interface language or not does not seem to affect the success rate of the search queries. On the other hand, the analysis of the strategy adopted by users when looking for a particular resource shows that people tend to use the simple search tool, frequently first running short queries build up of just one specific term and then browsing through the results to locate the expected resource

Tomas Lopez's Geographic Atlas of Spain in the Peninsular War: A methodology for determining errors

During the Peninsular War, Napoleon's and Wellington's armies were aware of the lack of precision in the maps of Spain and its provinces that appeared in Tomas Lopez \s Geographical Atlas of Spain. The errors were due to the non-topographical surveying method he used which he had learned from his teacher Jean Baptiste Bourguignon D 'Anville. To map all of the Spanish provinces, Tomas Lopez divided them into circles of three leagues in diameter (16,718 m), taking a particular town as the centre. He asked the town's priest to draw a map of the territory and to complete a questionnaire that Tomas Lopez sent to him. The priest was to return the two documents after he had completed them. Subsequently, at his desk, Tomas Lopez used the maps and reports as well as other graphic and written sources from various locations to make an outline of each map. Next, he made a mosaic that served as a pattern for drawing the final provincial map. We will see the way that this method was applied in two concrete cases: the villages ofChavaler and Monteagudo, situated in the Spanish province of Soria, and verify their degree of accuracy. We will use the maps drawn by the priests in 1767, the final map of the province which was published in 1804 by Tomás López, and a current map of the province showing the angular and linear errors in Lopez \s map.

Ecient Inference-aware RDB2RDF Query Rewriting

RDB2RDF systems generate RDF from relational databases, operating in two dierent manners: materializing the database content into RDF or acting as virtual RDF datastores that transform SPARQL queries into SQL. In the former, inferences on the RDF data (taking into account the ontologies that they are related to) are normally done by the RDF triple store where the RDF data is materialised and hence the results of the query answering process depend on the store. In the latter, existing RDB2RDF systems do not normally perform such inferences at query time. This paper shows how the algorithm used in the REQUIEM system, focused on handling run-time inferences for query answering, can be adapted to handle such inferences for query answering in combination with RDB2RDF systems.

Ecient Inference-aware RDB2RDF Query Rewriting

RDB2RDF systems generate RDF from relational databases, operating in two di�erent manners: materializing the database content into RDF or acting as virtual RDF datastores that transform SPARQL queries into SQL. In the former, inferences on the RDF data (taking into account the ontologies that they are related to) are normally done by the RDF triple store where the RDF data is materialised and hence the results of the query answering process depend on the store. In the latter, existing RDB2RDF systems do not normally perform such inferences at query time. This paper shows how the algorithm used in the REQUIEM system, focused on handling run-time inferences for query answering, can be adapted to handle such inferences for query answering in combination with RDB2RDF systems.

Enabling query technologies for the semantic sensor web

Sensor networks are increasingly being deployed in the environment for many different purposes. The observations that they produce are made available with heterogeneous schemas, vocabularies and data formats, making it difficult to share and reuse this data, for other purposes than those for which they were originally set up. The authors propose an ontology-based approach for providing data access and query capabilities to streaming data sources, allowing users to express their needs at a conceptual level, independent of implementation and language-specific details. In this article, the authors describe the theoretical foundations and technologies that enable exposing semantically enriched sensor metadata, and querying sensor observations through SPARQL extensions, using query rewriting and data translation techniques according to mapping languages, and managing both pull and push delivery modes.

Benchmarking federated SPARQL query engines: Are existing testbeds enough?

Testbeds proposed so far to evaluate, compare, and eventually improve SPARQL query federation systems have still some limitations. Some variables and con�gurations that may have an impact on the behavior of these systems (e.g., network latency, data partitioning and query properties) are not su�ciently de�ned; this a�ects the results and repeatability of independent evaluation studies, and hence the insights that can be obtained from them. In this paper we evaluate FedBench, the most comprehensive testbed up to now, and empirically probe the need of considering additional dimensions and variables. The evaluation has been conducted on three SPARQL query federation systems, and the analysis of these results has allowed to uncover properties of these systems that would normally be hidden with the original testbeds.

Towards a systematic benchmarking of ontology-based query rewriting systems

Query rewriting is one of the fundamental steps in ontologybased data access (OBDA) approaches. It takes as inputs an ontology and a query written according to that ontology, and produces as an output a set of queries that should be evaluated to account for the inferences that should be considered for that query and ontology. Different query rewriting systems give support to different ontology languages with varying expressiveness, and the rewritten queries obtained as an output do also vary in expressiveness. This heterogeneity has traditionally made it difficult to compare different approaches, and the area lacks in general commonly agreed benchmarks that could be used not only for such comparisons but also for improving OBDA support. In this paper we compile data, dimensions and measurements that have been used to evaluate some of the most recent systems, we analyse and characterise these assets, and provide a unified set of them that could be used as a starting point towards a more systematic benchmarking process for such systems. Finally, we apply this initial benchmark with some of the most relevant OBDA approaches in the state of the art.

On the errors involved in the estimate of glacier ice volume from ice thickness data

The assessment of the glacier thickness is one of the most widespread applications of radioglaciology, and is the basis for estimating the glacier volume. The accuracy of the measurement of ice thickness, the distribution of profiles over the glacier and the accuracy of the boundary delineation of the glacier are the most important factors determining the error in the evaluation of the glacier volume. The aim of this study is to get an accurate estimate of the error incurred in the estimate of glacier volume from GPR-retrieved ice-thickness data.

Desarrollo de un gestor de plantillas de mensajes HL7 para la carga de datos clínicos

El trabajo presentado a lo largo de este documento es el resultado del TFG1 realizado por Israel Suárez Santiago, alumno de la Escuela Técnica Superior de Ingenieros Informáticos (ETSIINF) de la Universidad Politécnica de Madrid (UPM). Dicho trabajo tiene como finalidad proporcionar una herramienta que, basada en estándares previamente estudiados, permita la fácil creación y gestión de plantillas de mensajes HL7v32 a las que posteriormente se le añadirán datos clínicos que serán insertados en una base de datos para su fácil acceso y consulta. La herramienta desarrollada únicamente facilita una serie de opciones para la creación de la plantilla en sí, que servirá como base para la creación de mensajes HL7v3, es decir, no permite la inclusión de datos específicos en las plantillas generadas, que deberá hacerse con alguna herramienta externa o bien manualmente. Las plantillas generadas por la herramienta se basan principalmente en el estándar CDA3, que proporciona una amplia guía para la correcta generación de mensajes HL7v3. La herramienta garantiza que las plantillas resultantes estarán correctamente formadas, siendo acordes al estándar anteriormente citado y siendo, además, sintácticamente correctas, es decir, el documento .xml generado no contendrá errores. ---ABSTRACT---This document is the result of the TFG developed by Israel Suárez Santiago, student of Escuela Técnica Superior de Ingenieros Informáticos (ETSIINF) of the Universidad Politécnica de Madrid (UPM). This work aims to offer a tool based on standards that can facilitate and manage the creation of HL7v3 templates. Clinical data will be added to those templates in order to load them into a database and query them fast and easily. The tool only facilitates several options to create the template, that will be used to generate the HL7v3 messages, but it does not permit the inclusion of data on them. The inclusion of data will be done manually or using an external tool. The generated templates are based mainly on the CDA1 standard, that provides a widely guide to create HL7v32 messages. The tool guarantees that the resulting templates have been correctly generated, following the previous standard and with no errors in the .xml document generated.