Agile Construction and Evolution of Product-Line Architectures

Software Product Line Engineering (SPLE) has proved to have significant advantages in family-based software development, but also implies the up¬front design of a product-line architecture (PLA) from which individual product applications can be engineered. The big upfront design associated with PLAs is in conflict with the current need of "being open to change". However, the turbulence of the current business climate makes change inevitable in order to stay competitive, and requires PLAs to be open to change even late in the development. The trend of "being open to change" is manifested in the Agile Software Development (ASD) paradigm, but it is spreading to the domain of SPLE. To reduce the big upfront design of PLAs as currently practiced in SPLE, new paradigms are being created, one being Agile Product Line Engineering (APLE). APLE aims to make the development of product-lines more flexible and adaptable to changes as promoted in ASD. To put APLE into practice it is necessary to make mechanisms available to assist and guide the agile construction and evolution of PLAs while complying with the "be open to change" agile principle. This thesis defines a process for "the agile construction and evolution of product-line architectures", which we refer to as Agile Product-Line Archi-tecting (APLA). The APLA process provides agile architects with a set of models for describing, documenting and tracing PLAs, as well as an algorithm to analyze change impact. Both the models and the change impact analysis offer the following capabilities: Flexibility & adaptability at the time of defining software architectures, enabling change during the incremental and iterative design of PLAs (anticipated or planned changes) and their evolution (unanticipated or unforeseen changes). Assistance in checking architectural integrity through change impact analysis in terms of architectural concerns, such as dependencies on earlier design decisions, rationale, constraints, and risks, etc.Guidance in the change decision-making process through change im¬pact analysis in terms of architectural components and connections. Therefore, APLA provides the mechanisms required to construct and evolve PLAs that can easily be refined iteration after iteration during the APLE development process. These mechanisms are provided in a modeling frame¬work called FPLA. The contributions of this thesis have been validated through the conduction of a project regarding a metering management system in electrical power networks. This case study took place in an i-smart software factory and was in collaboration with the Technical University of Madrid and Indra Software Labs. La Ingeniería de Líneas de Producto Software (Software Product Line Engi¬neering, SPLE) ha demostrado tener ventajas significativas en el desarrollo de software basado en familias de productos. SPLE es un paradigma que se basa en la reutilización sistemática de un conjunto de características comunes que comparten los productos de un mismo dominio o familia, y la personalización masiva a través de una variabilidad bien definida que diferencia unos productos de otros. Este tipo de desarrollo requiere el diseño inicial de una arquitectura de línea de productos (Product-Line Architecture, PLA) a partir de la cual los productos individuales de la familia son diseñados e implementados. La inversión inicial que hay que realizar en el diseño de PLAs entra en conflicto con la necesidad actual de estar continuamente "abierto al cam¬bio", siendo este cambio cada vez más frecuente y radical en la industria software. Para ser competitivos es inevitable adaptarse al cambio, incluso en las últimas etapas del desarrollo de productos software. Esta tendencia se manifiesta de forma especial en el paradigma de Desarrollo Ágil de Software (Agile Software Development, ASD) y se está extendiendo también al ámbito de SPLE. Con el objetivo de reducir la inversión inicial en el diseño de PLAs en la manera en que se plantea en SPLE, en los último años han surgido nuevos enfoques como la Ingeniera de Líneas de Producto Software Ágiles (Agile Product Line Engineering, APLE). APLE propone el desarrollo de líneas de producto de forma más flexible y adaptable a los cambios, iterativa e incremental. Para ello, es necesario disponer de mecanismos que ayuden y guíen a los arquitectos de líneas de producto en el diseño y evolución ágil de PLAs, mientras se cumple con el principio ágil de estar abierto al cambio. Esta tesis define un proceso para la "construcción y evolución ágil de las arquitecturas de lineas de producto software". A este proceso se le ha denominado Agile Product-Line Architecting (APLA). El proceso APLA proporciona a los arquitectos software un conjunto de modelos para de¬scribir, documentar y trazar PLAs, así como un algoritmo para analizar vel impacto del cambio. Los modelos y el análisis del impacto del cambio ofrecen: Flexibilidad y adaptabilidad a la hora de definir las arquitecturas software, facilitando el cambio durante el diseño incremental e iterativo de PLAs (cambios esperados o previstos) y su evolución (cambios no previstos). Asistencia en la verificación de la integridad arquitectónica mediante el análisis de impacto de los cambios en términos de dependencias entre decisiones de diseño, justificación de las decisiones de diseño, limitaciones, riesgos, etc. Orientación en la toma de decisiones derivadas del cambio mediante el análisis de impacto de los cambios en términos de componentes y conexiones. De esta manera, APLA se presenta como una solución para la construcción y evolución de PLAs de forma que puedan ser fácilmente refinadas iteración tras iteración de un ciclo de vida de líneas de producto ágiles. Dicha solución se ha implementado en una herramienta llamada FPLA (Flexible Product-Line Architecture) y ha sido validada mediante su aplicación en un proyecto de desarrollo de un sistema de gestión de medición en redes de energía eléctrica. Dicho proyecto ha sido desarrollado en una fábrica de software global en colaboración con la Universidad Politécnica de Madrid e Indra Software Labs.

Normalizar la utopía: Un proyecto de sistematización de la normativa en vivienda social = Normalizing Utopia: A Project of Systematization of Regulations on Social Housing

La presente tesis doctoral aborda el estudio del proyecto de vivienda colectiva social desde la noción de norma, entendida desde la sistematización o normalización de los instrumentos del proyecto arquitectónico de vivienda protegida. Esto es, desde una idea de tipificación taxonómica en cuanto ajuste a un conjunto de reglas comunes productoras de sistemas normativos. La hipótesis de partida se basa en la consideración de la vivienda pública como un laboratorio de estudio histórico de los ideales de confort y calidad de vida. Este campo de pruebas ha constituido una sólida base que ha servido como punto de encuentro muy particular entre proyecto y normativa desde las primeras vanguardias europeas hasta la actualidad. El principal objetivo de la investigación es la revalorización de una normativa de vivienda que ha producido ejemplos de innegable calidad en el contexto nacional e internacional, así como un intento de actualización de su codificación. La investigación se sirve de los instrumentos específicos de la disciplina arquitectónica para explicar una disociación detectada desde la segunda mitad del siglo pasado entre la utopía del proyecto social de vivienda y el pragmatismo de la norma que lo regula, más allá de los aspectos sociales y culturales asociados a las nuevas composiciones familiares, las tecnologías cambiantes, los ritos domésticos contemporáneos o el valor creciente del tiempo libre. La propuesta de una nueva terminología que aborde nuevas relaciones en el acercamiento al proyecto de vivienda desde la normativa española deriva en un conjunto de estrategias de proyecto desde las que proponer sistemas normativos. Dichas estrategias se basan principalmente en mecanismos de cualificación espacial que permitan un nuevo acercamiento entre dichas normas y las formas de habitar actuales. ABSTRACT This doctoral thesis deals with the study of the project of social collective housing from the notion of rule, understanding it from the systematization or standardization of the instruments of architectural project for social housing. Thus, it deals with an idea of taxonomic typification as an adjustment to a set of common rules which produce regulation systems. The initial hypothesis is based on the consideration of public housing as a laboratory for studying the historical ideals of comfort and quality of life. This testing ground has been a solid base that has served as a very specific meeting point between project and regulations from the first European avant‐garde to nowadays. The main objective of this research is the revaluation of housing regulations, which have produced examples of undeniable quality in the national and international stage, as well as an attempt to update their codification. The research assumes the specific tools of the discipline of architecture for explaining a dissociation detected between the utopia of the project for social housing and the pragmatism of the regulations from the second half of last century, beyond social and cultural aspects associated to the new family arrangements, the changing technologies, the contemporary domestic rituals or the rising value of leisure time. The proposal of a new terminology that tackles new relations in the approach to housing project from the Spanish legislation results in a set of strategies to propose regulation systems. Those strategies are mainly based on mechanisms for spatial qualification which allow a new approach between these rules and the current ways of living.

Application of user-centered design in the development of an atomated/assisted testing system for self-service devices

Automated Teller Machines (ATMs) are sensitive self-service systems that require important investments in security and testing. ATM certifications are testing processes for machines that integrate software components from different vendors and are performed before their deployment for public use. This project was originated from the need of optimization of the certification process in an ATM manufacturing company. The process identifies compatibility problems between software components through testing. It is composed by a huge number of manual user tasks that makes the process very expensive and error-prone. Moreover, it is not possible to fully automate the process as it requires human intervention for manipulating ATM peripherals. This project presented important challenges for the development team. First, this is a critical process, as all the ATM operations rely on the software under test. Second, the context of use of ATMs applications is vastly different from ordinary software. Third, ATMs’ useful lifetime is beyond 15 years and both new and old models need to be supported. Fourth, the know-how for efficient testing depends on each specialist and it is not explicitly documented. Fifth, the huge number of tests and their importance implies the need for user efficiency and accuracy. All these factors led us conclude that besides the technical challenges, the usability of the intended software solution was critical for the project success. This business context is the motivation of this Master Thesis project. Our proposal focused in the development process applied. By combining user-centered design (UCD) with agile development we ensured both the high priority of usability and the early mitigation of software development risks caused by all the technology constraints. We performed 23 development iterations and finally we were able to provide a working solution on time according to users’ expectations. The evaluation of the project was carried out through usability tests, where 4 real users participated in different tests in the real context of use. The results were positive, according to different metrics: error rate, efficiency, effectiveness, and user satisfaction. We discuss the problems found, the benefits and the lessons learned in the process. Finally, we measured the expected project benefits by comparing the effort required by the current and the new process (once the new software tool is adopted). The savings corresponded to 40% less effort (man-hours) per certification. Future work includes additional evaluation of product usability in a real scenario (with customers) and the measuring of benefits in terms of quality improvement.

The water footprint of olives and olive oil in Spain

This paper evaluates the water footprint of Spanish olives and olive oil over the period 1997-2008. In particular, it analyses the three colour components of the water footprint: green (rainwater stored in the soil), blue (surface and groundwater) and grey (freshwater required to assimilate load of pollutants). Apparent water productivity and virtual water embedded in olive oil exports have also been studied. Results show more than 99.5% of the water footprint of one liter of bottled olive oil is related to the olive production, whereas less than 0.5% is due to the other components such as bottle, cap and label. Over the studied period, the green water footprint in absolute terms of Spanish olive oil production represents about 72% in rainfed systems and just 12% in irrigated olive orchards. Blue and grey water footprints represent 6% and 10% of the national water footprint, respectively. It is shown that olive production is concentrated in regions with the smallest water footprint per unit of product. However, the increase of groundwater consumption in the main olive producing region (Andalusia), from 98 to 378 Mm3 between 1997 and 2008, has added significant pressure in the upstream Guadalquivir basin. This raises questions about the sustainability of irrigated olive orchards for export from the region. Finally, the virtual water related to olive oil exports illustrate the importance of green water footprint of rainfed olives amounting to about 77% of the total virtual water exports.

Assessment of transferable competences in computing

The European Credit Transfer and Accumulation System (ECTS) is the credit system for higher education used in the European Higher Education Area (EHEA), which involves all the countries engaged in the Bologna Process. This paper describes a study which is part of the project of the Bologna Experts Team-Spain and was carried out with the following aims: 1) designing some procedures for the assessment of transferable competences; and 2) testing some basic psychometric features that an assessment device with some consequences for the subjects being evaluated needs to prove. We will focus on the degrees of Computing. The sample of students (20) includes first year students from the Technical University of Madrid. In this paper, we will report some results of data analyses carried out to this moment on reliability and validity of the task designed to measure problem solving.

El análisis de la dirección integrada de proyectos (project & construction management) en el marco europeo: propuesta de regulación en España y su inclusión en la ley de la ordenación de la edificación

El presente trabajo de Tesis Doctoral surge de la Figura de la Dirección Integrada de Proyecto en Edificación (“Project & Construction Management”) y su analisis de la situación regulatoria en la legislación española. El primer planteamiento fue pensar en la situación actual de esta figura en el contexto internacional, para analizar su repercusión en el sector de la edificación, lo cual me llevo a cabo las siguientes preguntas que he reuelto en esta investigación. ¿ Como surge el ¨Project & Construction Management”? ¿ Cuales son sus actividades, funciones y cometidos? ¿ Existe el ¨Project & Construction Management” en otros países? ¿Hay regulación del ¨Project & Construction Management” en esos paises? ¿Cómo es la regulación del ¨Project & Construction Management”? ¿Existe demanda del ¨Project & Construction Management” en España? ¿Cómo es esa demanda en España, y como se puede cuantificar? ¿Existe regulación del ¨Project & Construction Management” en España? ¿ Como debería ser la regulación del ¨Project & Construction Management” en España? Todas las preguntas anteriores las he ido respondiendo con el presente trabajo, llegando a una serie de respuestas, que están reflejadas en el desarrollo del presente trabajo y que resumo: - EL ¨Project & Construction Management” surge a principios del siglo XX en USA, desarrollándose como una disciplina con metodología propia y extendiéndose por otros países. - EL ¨Project & Construction Management” es una disciplina, basada en una metodología propia con herramientas y técnicas para organizar cualquier 14 proyecto de cualquier tipo, pero en este caso un proyecto de edificación, para lo cual he definido con todo detalle esta figura. - El origen del ¨Project & Construction Management” es anglosajón, concretamente en USA, extendiendose luego al Reino Unido, a Europa (Francia y Alemania), a Asia, a América del Sur y a Oceanía. - En todos los paises estudiados (Estados Unidos, Reino Unido, Francia y Alemania) existe una regulación sobre el ¨Project & Construction Management” que me ha servido de base comparativa para introducirla en España. - Hay muchas empresas en España (Nacionales e Internacionales) que ejercen su actividad dentro de este sector, por lo que para realizar un estudio más profundo, hice una muestra de las 30 empresas más significativas, prepare un cuestionario, dividido en 5 apartados: Organizativo, Sectorial, Cualitativo, Cuantitativo y Profesional para obtener una radiogradía de la situación real del sector, y así valorar cual es la importancia de este agente. - Estudié las posibles regulaciones del ¨Project & Construction Management” en España y no encontré ninguna. - El lugar idóneo para que se regule al ¨Project & Construction Management” es la Ley de Ordenación de la Edificación (LOE), ya que la jurisprudencia (sentencias de los tribunales de justicia españoles) le ha asimilado con los agentes de la LOE y se ha basado para absolver o condenar en la Ley de Ordenación de la Edificación. Por lo que el Objetivo fundamental de esta tesis ha sido regular la figura del ¨Project & Construction Management”, traducirla al Castellano, definirla y realizar una estructura de Agente de la Edificación, según la LOE, para poder introducirla dentro de la Legislación Española, con el objeto de mejorar la calidad de la edificación, proteger al usuario, estableciendo responsabilidades y garantías y proteger al ¨Project & Construction Management” de las responsabilidades solidarias. ABSTRACT This Doctoral Thesis figure emerges from the Integrated Building Project ("Project & Construction Management") and his analysis of the regulatory situation in the Spanish legislation. The first approach was to think of the current situation of this figure in the international context, to analyze its impact on the building sector, which I conducted the following questions that I have met in this research. - How did the “Project & Construction Management "? - What are your activities, functions and duties? - Is there a “Project & Construction Management "in other countries? - Is there regulation “Project & Construction Management "in these countries? - How is regulation of ¨ Project & Construction Management "? - Is there demand “Project & Construction Management "in Spain? - How is that demand in Spain, and as you can quantify? - Is there regulation “Project & Construction Management "in Spain? - How should regulation ¨Project & Construction Management "in Spain? All the above questions have been answered with this study, leading to a series of responses, which are reflected in the development of this study and are summarized: - The ¨ Project & Construction Management "comes early twentieth century in the USA, developed as a discipline with its own methodology and extending other countries. - The ¨ Project & Construction Management "is a discipline based on a metodology own tools and techniques to organize any project of any kind, but in this case a building project, for which I have defined in detail this figure. - The origin of ¨Project & Construction Management "is Anglo-Saxon, particularly in USA, then spreading to the UK, Europe (France and Germany), Asia, South America and Oceania. - In all countries studied (USA, UK, France and Germany) there is a regulation on ¨Project & Construction Management "has helped me to introduce comparative base in Spain. - There are many companies in Spain (National and International) who perform work within this sector, so for further study, I made a sample of the 30 most important companies, prepare a questionnaire, divided into five sections: Organizational , Sector, Qualitative, Quantitative and Professional radiography for a real situation of the sector, and thus assess which is the importance of this agent. - Study the possible regulations ¨Project & Construction Management "in Spain and found none. - The place to be regulated to ¨Project & Construction Management "is the Law of Construction Planning (LOE), as the case law (judgments of the courts Spanish) has assimilated LOE agents and has been based to absolve or condemn Law Construction Planning. So the objective of this thesis has been regular figure ¨ Project & Construction Management ", translated to spanish, define and perform an Agent structure of the Building, as the LOE, to enter into Spanish law, in order to improve the quality of the building, protecting the user, establishing responsibilities and guarantees and protect the ¨ Project & Construction Management "solidarity responsibilities.

Approach to integrate product conceptual design information into a computer-aided design system

Commercial computer-aided design systems support the geometric definition of product, but they lack utilities to support initial design stages. Typical tasks such as customer need capture, functional requirement formalization, or design parameter definition are conducted in applications that, for instance, support ?quality function deployment? and ?failure modes and effects analysis? techniques. Such applications are noninteroperable with the computer-aided design systems, leading to discontinuous design information flows. This study addresses this issue and proposes a method to enhance the integration of design information generated in the early design stages into a commercial computer-aided design system. To demonstrate the feasibility of the approach adopted, a prototype application was developed and two case studies were executed.

News in engineering education in Spain effective from 2010 in presence of external changes and mixed crisis, looking mostly to agro and civil engineers.

The engineering careers models were diverse in Europe, and are adopting now in Spain the Bolonia process for European Universities. Separated from older Universities, that are in part technically active, Civil Engineering (Caminos, Canales y Puertos) started at end of 18th century in Spain adopting the French models of Upper Schools for state civil servants with exam at entry. After 1800 intense wars, to conserve forest regions Ingenieros de Montes appeared as Upper School, and in 1855 also the Ingenieros Agrónomos to push up related techniques and practices. Other Engineers appeared as Upper Schools but more towards private factories. These ES got all adapted Lower Schools of Ingeniero Tecnico. Recently both grew much in number and evolved, linked also to recognized Professions. Spanish society, into European Community, evolved across year 2000, in part highly well, but with severe discordances, that caused severe youth unemployment with 2008-2011 crisis. With Bolonia process high formal changes step in from 2010-11, accepted with intense adaptation. The Lower Schools are changing towards the Upper Schools, and both that have shifted since 2010-11 various 4-years careers (Grado), some included into the precedent Professions, and diverse Masters. Acceptation of them to get students has started relatively well, and will evolve, and acceptation of new grades for employment in Spain, Europe or outside will be essential. Each Grado has now quite rigid curricula and programs, MOODLE was introduced to connect pupils, some specific uses of Personal Computers are taught in each subject. Escuela de Agronomos centre, reorganized with its old name in its precedent buildings at entrance of Campus Moncloa, offers Grados of Agronomic Engineering and Science for various public and private activities for agriculture, Alimentary Engineering for alimentary activities and control, Agro-Environmental Engineering more related to environment activities, and in part Biotechnology also in laboratories in Campus Monte-Gancedo for Biotechnology of Plants and Computational Biotechnology. Curricula include Basics, Engineering, Practices, Visits, English, ?project of end of career?, Stays. Some masters will conduce to specific professional diploma, list includes now Agro-Engineering, Agro-Forestal Biotechnology, Agro and Natural Resources Economy, Complex Physical Systems, Gardening and Landscaping, Rural Genie, Phytogenetic Resources, Plant Genetic Resources, Environmental Technology for Sustainable Agriculture, Technology for Human Development and Cooperation.

Simulation of academic performance rates, estimation of indicators of subjects and of a complete degree

The purpose of this paper is to present a program written in Matlab-Octave for the simulation of the time evolution of student curricula, i.e, how students pass their subjects along time until graduation. The program computes, from the simulations, the academic performance rates for the subjects of the study plan for each semester as well as the overall rates, which are a) the efficiency rate defined as the ratio of the number of students passing the exam to the number of students who registered for it and b) the success rate, defined as the ratio of the number of students passing the exam to the number of students who not only registered for it but also actually took it. Additionally, we compute the rates for the bachelor academic degree which are established for Spain by the National Quality Evaluation and Accreditation Agency (ANECA) and which are the graduation rate (measured as the percentage of students who finish as scheduled in the plan or taking an extra year) and the efficiency rate (measured as the percentage of credits which a student who graduated has really taken). The simulation is done in terms of the probabilities of passing all the subjects in their study plan. The application of the simulator to Polytech students in Madrid, where requirements for passing are specially stiff in first and second year subjects, is particularly relevant to analyze student cohorts and the probabilities of students finishing in the minimum of four years, or taking and extra year or two extra years, and so forth. It is a very useful tool when designing new study plans. The calculation of the probability distribution of the random variable "number of semesters a student has taken to complete the curricula and graduate" is difficult or even unfeasible to obtain analytically, and this is even truer when we incorporate uncertainty in parameter estimation. This is why we apply Monte Carlo simulation which not only provides illustration of the stochastic process but also a method for computation. The stochastic simulator is proving to be a useful tool for identification of the subjects most critical in the distribution of the number of semesters for curriculum vitae (CV) completion and subsequently for a decision making process in terms of CV planning and passing standards in the University. Simulations are performed through a graphical interface where also the results are presented in appropriate figures. The Project has been funded by the Call for Innovation in Education Projects of Universidad Politécnica de Madrid (UPM) through a Project of its school Escuela Técnica Superior de Ingenieros Industriales ETSII during the period September 2010-September 2011.

Microstructural segmentation of 3D images of alsphalt specimen using Matlab engine

En este proyecto se ha desarrollado un código de MATLAB para el procesamiento de imágenes tomográficas 3D, de muestras de asfalto de carreteras en Polonia. Estas imágenes en 3D han sido tomadas por un equipo de investigación de la Universidad Tecnológica de Lodz (LUT). El objetivo de este proyecto es crear una herramienta que se pueda utilizar para estudiar las diferentes muestras de asfalto 3D y pueda servir para estudiar las pruebas de estrés que experimentan las muestras en el laboratorio. Con el objetivo final de encontrar soluciones a la degradación sufrida en las carreteras de Polonia, debido a diferentes causas, como son las condiciones meteorológicas. La degradación de las carreteras es un tema que se ha investigado desde hace muchos años, debido a la fuerte degradación causada por diferentes factores como son climáticos, la falta de mantenimiento o el tráfico excesivo en algunos casos. Es en Polonia, donde estos tres factores hacen que la composición de muchas carreteras se degrade rápidamente, sobre todo debido a las condiciones meteorológicas sufridas a lo largo del año, con temperaturas que van desde 30° C en verano a -20° C en invierno. Esto hace que la composición de las carreteras sufra mucho y el asfalto se levante, lo que aumenta los costos de mantenimiento y los accidentes de carretera. Este proyecto parte de la base de investigación que se lleva a cabo en la LUT, tratando de mejorar el análisis de las muestras de asfalto, por lo que se realizarán las pruebas de estrés y encontrar soluciones para mejorar el asfalto en las carreteras polacas. Esto disminuiría notablemente el costo de mantenimiento. A pesar de no entrar en aspectos muy técnicos sobre el asfalto y su composición, se ha necesitado realizar un estudio profundo sobre todas sus características, para crear un código capaz de obtener los mejores resultados. Por estas razones, se ha desarrollado en Matlab, los algoritmos que permiten el estudio de los especímenes 3D de asfalto. Se ha utilizado este software, ya que Matlab es una poderosa herramienta matemática que permite operar con matrices para realización de operaciones rápidamente, permitiendo desarrollar un código específico para el tratamiento y procesamiento de imágenes en 3D. Gracias a esta herramienta, estos algoritmos realizan procesos tales como, la segmentación de la imagen 3D, pre y post procesamiento de la imagen, filtrado o todo tipo de análisis microestructural de las muestras de asfalto que se están estudiando. El código presentado para la segmentación de las muestras de asfalto 3D es menos complejo en su diseño y desarrollo, debido a las herramientas de procesamiento de imágenes que incluye Matlab, que facilitan significativamente la tarea de programación, así como el método de segmentación utilizado. Respecto al código, este ha sido diseñado teniendo en cuenta el objetivo de facilitar el trabajo de análisis y estudio de las imágenes en 3D de las muestras de asfalto. Por lo tanto, el principal objetivo es el de crear una herramienta para el estudio de este código, por ello fue desarrollado para que pueda ser integrado en un entorno visual, de manera que sea más fácil y simple su utilización. Ese es el motivo por el cual todos estos algoritmos y funciones, que ha sido desarrolladas, se integrarán en una herramienta visual que se ha desarrollado con el GUIDE de Matlab. Esta herramienta ha sido creada en colaboración con Jorge Vega, y fue desarrollada en su proyecto final de carrera, cuyo título es: Segmentación microestructural de Imágenes en 3D de la muestra de asfalto utilizando Matlab. En esta herramienta se ha utilizado todo las funciones programadas en este proyecto, y tiene el objetivo de desarrollar una herramienta que permita crear un entorno gráfico intuitivo y de fácil uso para el estudio de las muestras de 3D de asfalto. Este proyecto se ha dividido en 4 capítulos, en un primer lugar estará la introducción, donde se presentarán los aspectos más importante que se va a componer el proyecto. En el segundo capítulo se presentarán todos los datos técnicos que se han tenido que estudiar para desarrollar la herramienta, entre los que cabe los tres temas más importantes que se han estudiado en este proyecto: materiales asfálticos, los principios de la tomografías 3D y el procesamiento de imágenes. Esta será la base para el tercer capítulo, que expondrá la metodología utilizada en la elaboración del código, con la explicación del entorno de trabajo utilizado en Matlab y todas las funciones de procesamiento de imágenes utilizadas. Además, se muestra todo el código desarrollado, así como una descripción teórica de los métodos utilizados para el pre-procesamiento y segmentación de las imagenes en 3D. En el capítulo 4, se mostrarán los resultados obtenidos en el estudio de una de las muestras de asfalto, y, finalmente, el último capítulo se basa en las conclusiones sobre el desarrollo de este proyecto. En este proyecto se ha llevado han realizado todos los puntos que se establecieron como punto de partida en el anteproyecto para crear la herramienta, a pesar de que se ha dejado para futuros proyectos nuevas posibilidades de este codigo, como por ejemplo, la detección automática de las diferentes regiones de una muestra de asfalto debido a su composición. Como se muestra en este proyecto, las técnicas de procesamiento de imágenes se utilizan cada vez más en multitud áreas, como pueden ser industriales o médicas. En consecuencia, este tipo de proyecto tiene multitud de posibilidades, y pudiendo ser la base para muchas nuevas aplicaciones que se puedan desarrollar en un futuro. Por último, se concluye que este proyecto ha contribuido a fortalecer las habilidades de programación, ampliando el conocimiento de Matlab y de la teoría de procesamiento de imágenes. Del mismo modo, este trabajo proporciona una base para el desarrollo de un proyecto más amplio cuyo alcance será una herramienta que puedas ser utilizada por el equipo de investigación de la Universidad Tecnológica de Lodz y en futuros proyectos. ABSTRACT In this project has been developed one code in MATLAB to process X-ray tomographic 3D images of asphalt specimens. These images 3D has been taken by a research team of the Lodz University of Technology (LUT). The aim of this project is to create a tool that can be used to study differents asphalt specimen and can be used to study them after stress tests undergoing the samples. With the final goal to find solutions to the degradation suffered roads in Poland due to differents causes, like weather conditions. The degradation of the roads is an issue that has been investigated many years ago, due to strong degradation suffered caused by various factors such as climate, poor maintenance or excessive traffic in some cases. It is in Poland where these three factors make the composition of many roads degrade rapidly, especially due to the weather conditions suffered along the year, with temperatures ranging from 30 o C in summer to -20 ° C in winter. This causes the roads suffers a lot and asphalt rises shortly after putting, increasing maintenance costs and road accident. This project part of the base that research is taking place at the LUT, in order to better analyze the asphalt specimens, they are tested for stress and find solutions to improve the asphalt on Polish roads. This would decrease remarkable maintenance cost. Although this project will not go into the technical aspect as asphalt and composition, but it has been required a deep study about all of its features, to create a code able to obtain the best results. For these reasons, there have been developed in Matlab, algorithms that allow the study of 3D specimens of asphalt. Matlab is a powerful mathematical tool, which allows arrays operate fastly, allowing to develop specific code for the treatment and processing of 3D images. Thus, these algorithms perform processes such as the multidimensional matrix sgementation, pre and post processing with the same filtering algorithms or microstructural analysis of asphalt specimen which being studied. All these algorithms and function that has been developed to be integrated into a visual tool which it be developed with the GUIDE of Matlab. This tool has been created in the project of Jorge Vega which name is: Microstructural segmentation of 3D images of asphalt specimen using Matlab engine. In this tool it has been used all the functions programmed in this project, and it has the aim to develop an easy and intuitive graphical environment for the study of 3D samples of asphalt. This project has been divided into 4 chapters plus the introduction, the second chapter introduces the state-of-the-art of the three of the most important topics that have been studied in this project: asphalt materials, principle of X-ray tomography and image processing. This will be the base for the third chapter, which will outline the methodology used in developing the code, explaining the working environment of Matlab and all the functions of processing images used. In addition, it will be shown all the developed code created, as well as a theoretical description of the methods used for preprocessing and 3D image segmentation. In Chapter 4 is shown the results obtained from the study of one of the specimens of asphalt, and finally the last chapter draws the conclusions regarding the development of this project.

Indicators of sustainability of agriculture and livestock in Spain - Indicadores de sostenibilidad de la agricultura y ganadería española

Sustainability is an adjective used to characterize agriculture according to the degree of fulfillment of goals. Those goals are related to agro-ecological, environmental and socio-economic dimensions. Sustainability is a dynamic and temporal character. In absolute terms there is not an ending value because it changes as its dimensions make it. Spain is one of the main agricultural countries of the European Union both in terms of crop land and value of productions. The object of this study is to present a methodology of sustainability account to be incorporated into national statistical and to assess their performance in the course of the years. For that reason the data sources used have been the statistics of the Department of Agriculture and from others database. We presented a set of indicators of sustainability and its evaluation in a time series of at least 30 years. The trend analysis offers the evolution of the numerical values of the indicators in terms of efficiency, physical units used for a unit of product or its value in euros. The analyzed crops have been: wheat, barley, maize, sunflower, sugar beet, wine grape, olive oil, citrus, melon and tomato. Physical indicators were: land, water, energy, erosion, soil organic matter, and carbon balance; socio-economic indicators were: agricultural final production, prices, income, employment and use of fertilizers. In general, all crops increased their productive efficiency, higher in irrigated than on dry land. Spanish agricultural carbon sequestration capacity has multiplied by five in the last seventy years, as a result of the increase in the productivity of crops, in terms of total biomass and the modification of the soil management techniques. Livestock sector presents data of pork, broilers and laying hen. Those showed an improvement in efficiency and economic indicators. Overall we can say that Spanish agriculture and livestock subsector have a tendency towards sustainability, being its main threats extreme meteorological factors and the instability of todays markets.

Decision-Making Mechanism to Organize the Agenda of a Guide-Robot

One of the major challenges in evolutionary robotics is constituted by the need of the robot being able to make decisions on its own, in accordance with the multiple tasks programmed, optimizing its timings and power. In this paper, we present a new automatic decision making mechanism for a robot guide that allows the robot to make the best choice in order to reach its aims, performing its tasks in an optimal way. The election of which is the best alternative is based on a series of criteria and restrictions of the tasks to perform. The software developed in the project has been verified on the tour-guide robot Urbano. The most important aspect of this proposal is that the design uses learning as the means to optimize the quality in the decision making. The modeling of the quality index of the best choice to perform is made using fuzzy logic and it represents the beliefs of the robot, which continue to evolve in order to match the "external reality”. This fuzzy system is used to select the most appropriate set of tasks to perform during the day. With this tool, the tour guide-robot prepares its agenda daily, which satisfies the objectives and restrictions, and it identifies the best task to perform at each moment. This work is part of the ARABOT project of the Intelligent Control Research Group at the Universidad Politécnica de Madrid to create "awareness" in a robot guide.

Proposal for the Conceptual Design of Aeronautical Final Assembly Lines Based on the Industrial Digital Mock-Up Concept

The design of a Final Assembly Line (FAL) is carry out in the product industrialization activity. The phase dealing with the definition of conceptual solutions is characterized by depending heavily on the personnel experience and being time-consuming. To enhance such process, it is proposed a development of a knowledge based software application to assist designers in the definition of scenarios and to generate conceptual FAL alternatives. Both the scenario and the generated FAL solution are part of the industrialization digital mock-up (IDMU). A commercial software application used in the aircraft programmes and supporting the IDMU concepts of: Product, Process and Resource; was selected to implement a software prototype. This communication presents the adopted methodological approach and the architecture of the developed application.

Sampling strategies using the "accumulation chamber" for monitoring geological storage of CO2

Fundación Ciudad de la Energía (CIUDEN) is carrying out a project of geological storage of CO2, where CO2 injection tests are planned in saline aquifers at a depth of 1500 m for scientific objectives and project demonstration. Before any CO2 is stored, it is necessary to determine the baseline flux of CO2 in order to detect potential leakage during injection and post-injection monitoring. In November 2009 diffuse flux measurements of CO2 using an accumulation chamber were made in the area selected by CIUDEN for geological storage, located in Hontomin province of Burgos (Spain). This paper presents the tests carried out in order to establish the optimum sampling methodology and the geostatistical analyses performed to determine the range, with which future field campaigns will be planned.

Cadena de valor de papas nativas (Solanum andigenum sp.) en la provincia de Jauja, Perú

La Asamblea General de la ONU, a solicitud del gobierno peruano, declara en el año 2008 el Año Internacional de la Papa, (AIP). Desde el año 2005, el gobierno peruano ha puesto en marcha estrategias en torno a la importancia de la papa, como la declaración del 30 de Mayo como el Día Nacional de la Papa. El año 2014 es declarado por la FAO, (Food and Agriculture Organization of the United Nations), Año Internacional de la Agricultura Familiar, con un enfoque compartido por esta Tesis Doctoral en el apoyo a la familia campesina peruana. El gobierno peruano utiliza las cadenas de valor como una estrategia de promoción de desarrollo sostenible, que ha permitido contribuir a la inclusión social y económica de productores pobres de zonas alto andinas, como las localizadas en la mancomunidad municipal del Yacus, (MMY), provincia de Jauja, departamento de Junín. Esta estrategia, en la que el mercado incorpora a los pequeños agricultores de las zonas altas de los Andes, (que disponen de recursos económicos muy bajos), en procesos productivos rentables, implica una serie de cambios a realizar, como la transformación de los patrones de producción tradicional hacia aquellos productos o servicios que tienen demanda en el mercado, o la variación de la mentalidad del agricultor pequeño hacia una concepción empresarial de su producción. (Fabián, 2013). Por otra parte, la sostenibilidad de las cadenas de valor depende del eslabón más débil, lo que obliga a conocer la situación de todos los eslabones para poder integrar y reforzar la cadena. Se requiere un sistema de transparencia adecuado que facilite el flujo de la información entre los distintos eslabones. (Briz et al., 2012). Además, el establecimiento de la cadena de valor debe hacerse con cuidado, ya que la eficacia y supervivencia de las empresas están cada vez más ligadas a la cadena de valor a la que pertenece y a la coordinación de la misma. (Briz, 2011). En esta situación, adquiere importancia el estudio de la cadena de valor de la papa nativa, para una vez establecidas sus características, poder determinar la viabilidad o no de una cadena de valor de este producto que repercuta parte de la riqueza generada en los pequeños agricultores alto andinos, e incluso, de su extensión hasta España. Existen estudios sobre las papas nativas, realizadas por diferentes universidades de distintos países, e incluso, de diferentes continentes. Sin embargo, la mayoría de los estudios se centran en la mejora de la producción de la papa nativa. La novedad de la investigación realizada en la presente Tesis Doctoral radica en el estudio de la viabilidad de la comercialización de la papa nativa, mediante el establecimiento de una cadena de valor que se inicie en la provincia de Jauja, Perú, y finalice tanto en los mercados peruanos de las regiones de Junín y Lima, como en España. El objetivo planteado en esta investigación es la mejora de las condiciones económicas y sociales de las comunidades agrícolas de la provincia de Jauja en el Perú, así como fomentar su desarrollo tecnológico e industrial, mediante el fomento de la cadena de valor de la papa nativa y sus derivados. Se establecen como objetivos específicos la caracterización de los eslabones de la cadena de valor de la papa nativa y sus derivados en la provincia de Jauja del Perú y en España, de manera que se determine el valor agregado en los mismos; el fortalecimiento de las organizaciones de productores de papas nativas para la comercialización de sus producciones y para el fomento de la cultura empresarial; y el desarrollo de una cadena de comercialización papas nativas y sus derivados con origen en la Provincia de Jauja, Perú, y que finalice en España, con la venta al consumidor español. Para alcanzar estos objetivos la metodología utilizada es la cadena de valor agroalimentaria, utilizando como herramientas de análisis el análisis DAFO de la cadena de valor de la papa nativa. Las fuentes de información primarias utilizadas proceden en parte del proyecto de cooperación de UPM, “Mejora de la cadena de valor de la patata andina como impulso al desarrollo rural. Caso de tres Comunidades Campesinas en la Provincia de Jauja del Perú”, en el que participó el doctorando, y en parte proceden de la batería de encuestas específicamente diseñadas para los diferentes eslabones de la cadena de valor de la papa nativa. Las fuentes de información secundarias proceden de artículos académicos publicados, de artículos publicados por revistas especializadas del sector y de informes realizados por diferentes instituciones gubernamentales, tanto españolas como peruanas. Las conclusiones de la investigación son las siguientes. La creación de la mancomunidad del Yacus ha beneficiado a los pequeños agricultores. Estos consiguen mejores condiciones de venta y mejores precios para sus productos, lo que repercute en la mejora de sus condiciones de vida. Estas mejoras en las condiciones de venta de los productos se deben a su pertenencia a una cadena de valor de papa nativa que está funcionando de forma eficaz. Las empresas consideradas para constituir la cadena de valor han mostrado interés por formar parte de ella: los campesinos para obtener mejores precios por sus productos y unas mejores condiciones de venta; los distribuidores para asegurarse una calidad determinada de unas variedades fijas de papa nativa; la industria transformadora por disponer de un suministro de producto adecuado al derivado de papa nativa correspondiente, (hojuelas, tunta, etc.); las empresas exportadoras para tener suministro garantizado de los productos que ellos requieren en los volúmenes adecuados. Es una situación ventajosa para todas las empresas participantes. A pesar de trabajar con un producto tradicional, la cadena de valor de la papa nativa presenta innovación en los productos comercializados, tanto en la papa nativa fresca como en sus derivados, en los formatos de los productos, en la red de distribución, en las instituciones peruanas y en el consumidor final. Se percibe una demanda de papa nativa y de sus productos derivados en aquellos países donde existen comunidades de latinoamericanos que han emigrado de sus países de origen. España está entre los países que han acogido a un importante número de personas de origen latinoamericano. A pesar de la fuerte crisis económica sufrida por España, que ha llevado consigo la vuelta a sus países de origen de parte de su comunidad latinoamericana, el tamaño de esta población sigue siendo importante. Esta población demanda productos originarios de sus propios países, y los consumirían de forma frecuente si los precios son adecuados a su capacidad de consumo. El precio de venta de la papa nativa y sus derivados en España es de gran importancia. La importación de estos productos desde Perú hace que este eleve a niveles que le resta competitividad, en especial en la papa fresca. Se aconseja la búsqueda de empresas que puedan adaptar la producción de la papa fresca de forma local, y mantener para los derivados la exportación directa a España. Las preferencias de los consumidores peruanos y españoles en cuanto a formatos y marcas se refieren no son coincidentes. De las encuestas realizadas, se concluye que no puede seguirse la misma estrategia de marketing en ambos países, debiéndose diferenciar los formatos de los paquetes de la papa nativa y de sus derivados en España y en Perú, para así lograr llegar a los consumidores potenciales de ambos países. ABSTRACT At the request of the Peruvian government, the UN General Assembly declared the International Year of the Potato in 2008. Since 2005, the Peruvian government has implemented strategies around the importance of the potato, as the declaration of the 30th of May as the National Day of the Potato. FAO (Food and Agriculture Organization of the United Nations) has declared 2014 as the International Year of Family Farming, with an approach shared by this Ph.D. dissertation about the Peruvian peasant family. The Peruvian government uses value chains as a strategy to promote sustainable development, which has allowed to contribute to the social and economic inclusion of poor farmers in the high Andean regions as those located in the municipal commonwealth of Yacus (MMY) province of Jauja, department of Junín. This strategy, which incorporates small farmers in the high Andean regions, (who have very low income), to the market with profitable production processes, implies a number of changes that should take place, such as changing patterns of traditional production to those products or services that are in demand in the market, or changes in the mentality of the small farmer into a concept of production business. (Fabián, 2013). Moreover, the sustainability of value chains depends on the weakest link, which demands a knowledge of the status of all the links, in order to integrate and strengthen the chain. It is required an adequate transparency to facilitate the flow of information between the various actors. (Briz et al., 2012). Furthermore, the establishment of the value chain should be done carefully, since the effectiveness and the survival of the businesses are increasingly linked to the value chain where the firm is included and to its coordination. (Briz, 2011). In this situation, it becomes important to study the value chain of the native potato, once we establish its features, to be able to determine the feasibility or not of a value chain of this product, which has an impact of the generated wealth in small farms of the high Andean regions, and even the extension of this value chain to Spain. There are studies on native potatoes, made by different universities in several countries and even in more than one continent. However, most studies focus on improving the production of native potato. The originality of the research conducted in this Ph.D. dissertation is the study of the feasibility of commercialization of native potato, by the creation of a value chain that starts in the province of Jauja, Perú, and ends both in Peruvian markets in the region of Lima, and in Spain. The main goal of this research is to improve the economic and social conditions of farming communities in the province of Jauja in Perú, while promoting its technological and industrial development, by the establishment of a value chain of the native potato and derivatives. The specific objectives of the research are the characterization of the links in the value chain of the native potato and its derivatives in the province of Jauja, (Perú) and in Spain, in order to determine the added value; the strengthening of organizations of native potato producers, to commercialize their products and the promotion of enterprise culture; and the development of a chain to market native potato and its derivatives, with its origin in the province of Jauja, (Perú), and its end in Spain, with the sale to the Spanish consumer. In order to achieve these objectives, the used methodology is the agrifood value chain, using as a tool to analysis it the SWOT analysis of the value chain of the native potato. The primary sources of information used in the research come partly from UPM cooperation project, "Improving the value chain of Andean potato as a boost to rural development. Case Three Rural Communities in the Province of Jauja, (Perú)", in which the Ph.D. student was involved, and partly from the surveys, which were specifically designed for the different links of the value chain of the native potato. The secondary sources of information come from academic articles, from articles published by magazines of the industry, and from reports of several government institutions, both Spanish and Peruvian. The conclusions of the research are as follows. The creation of the commonwealth of Yacus has benefited small farmers. They get better sales conditions and better prices for their products, which results in the improvement of their living conditions. These improvements are due to a value chain of native potato which is working effectively. All the firms invited to constitute the value chain have shown interest in being part of it: the farmers to get better prices for their products and better sale conditions; the distributors to ensure a certain quality of fixed varieties of native potato, the processing industry in order to have an adequate supply of product to the corresponding derivative of native potato (chips, “tunta”, etc.); exporting firms to have a guaranteed supply of the products that they require with the right volumes. It's a win-win situation for all participating companies. Despite being a traditional product, the value chain of the native potato presents innovation in marketed products, (both fresh native potato and its derivatives), in the formats of products, in the distribution network, in Peruvian institutions and in relation with the consumer. There is a perceived demand of native potato and its products in countries where communities of Latin Americans have settled down. Spain is among the countries that have received a significant number of people from Latin America. Despite the strong economic crisis suffered by Spain, which has lead to a return to their home countries of part of the Latin American community, the size of this population is still considerable. This population demands products from their own countries, and they frequently consume them if the prices are suitable to their standard of living. The selling price of the native potato and its derivatives in Spain is of great importance. The import of these products from Perú makes the prices rise to levels that reduce competitiveness, especially in fresh native potatoes. It is advised to look for companies which can adapt the fresh potato production in our country, and keep direct export to Spain for the derivatives products. The preferences of Peruvian and Spanish consumers in terms of formats and brands are not the same. The surveys concluded that the same marketing strategy cannot be followed in both countries. Packet formats of native potato and its derivatives should be differentiated in Spain and Perú, in order to reach the potential consumers of both countries.