Distributed System for Cognitive Stimulation Over Interactive TV.

Descripción y evaluación de sistema de estimulación cognitiva a través de la TDT orientada a personas con enfermedad de Parkinson, con supervisión por parte de sus terapeutas de forma remota. Abstract: This paper details the full design, implementation, and validation of an e-health service in order to improve the community health care services for patients with cognitive disorders. Specifically, the new service allows Parkinson’s disease patients benefit from the possibility of doing cognitive stimulation therapy (CST) at home by using a familiar device such as a TV set. Its use instead of a PC could be a major advantage for some patients whose lack of familiarity with the use of a PC means that they can do therapy only in the presence of a therapist. For these patients this solution could bring about a great improvement in their autonomy. At the same time, this service provides therapists with the ability to conduct follow-up of therapy sessions via the web,benefiting from greater and easier control of the therapy exercises performed by patients and allowing them to customize new exercises in accordance with the particular needs of each patient. As a result, this kind of CST is considered to be a complement of other therapies oriented to the Parkinson patients. Furthermore, with small changes, the system could be useful for patients with a different cognitive disease such as Alzheimer’s or mild cognitive impairment.

Stability and Transient Performance Assessment in a COTS-Module-Based Distributed DC/DC System

This paper introduces a method to analyze and predict stability and transient performance of a distributed system where COTS (Commercial-off-the-shelf) modules share an input filter. The presented procedure is based on the measured data from the input and output terminals of the power modules. The required information for the analysis is obtained by performing frequency response measurements for each converter. This attained data is utilized to compute special transfer functions, which partly determine the source and load interactions within the converters. The system level dynamic description is constructed based on the measured and computed transfer functions introducing cross-coupling mechanisms within the system. System stability can be studied based on the well-known impedance- related minor-loop gain at an arbitrary interface within the system.

Implementing distributed concurrent constraint execution in the CIAO system

This paper describes the current prototype of the distributed CIAO system. It introduces the concepts of "teams" and "active modules" (or active objects), which conveniently encapsulate different types of functionalities desirable from a distributed system, from parallelism for achieving speedup to client-server applications. The user primitives available are presented and their implementation described. This implementation uses attributed variables and, as an example of a communication abstraction, a blackboard that follows the Linda model. Finally, the CIAO WWW interface is also briefly described. The unctionalities of the system are illustrated through examples, using the implemented primitives.

Distributed concurrent constraint execution in the CIAO system

This paper describes the current prototype of the distributed CIAO system. It introduces the concepts of "teams" and "active modules" (or active objects), which conveniently encapsulate different types of functionalities desirable from a distributed system, from parallelism for achieving speedup to client-server applications. It presents the user primitives available and describes their implementation. This implementation uses attributed variables and, as an example of a communication abstraction, a blackboard that follows the Linda model. The functionalities of the system are illustrated through examples, using the implemented primitives. The implementation of most of the primitives is also described in detail.

Development of the infrastructure for a multi-agent traffic management system simulation

This document contains detailed description of the design and the implementation of a multi-agent application controlling traffic lights in a city together with a system for simulating traffic and testing. The goal of this thesis is to design and build a simplified intelligent and distributed solution to the problem with the traffic in the big cities following different good practices in order to allow future refining of the model of the real world. The problem of the traffic in the big cities is still a problem that cannot be solved. Not only is the increasing number of cars a reason for the traffic jams, but also the way the traffic is organized. Usually, the intersections with traffic lights are replaced by roundabouts or interchanges to increase the number of cars that can cross the intersection in certain time. But still there are places where the infrastructure cannot be changed and the traffic light semaphores are the only way to control the car flows. In real life, the traffic lights have a predefined plan for change or they receive information from a centralized system when and how they have to change. But what if the traffic lights can cooperate and decide on their own when and how to change? Using this problem, the purpose of the thesis is to explore different agent-based software engineering approaches to design and build a non-conventional distributed system. From the software engineering point of view, the goal of the thesis is to apply the knowledge and use the skills, acquired during the various courses of the master program in Software Engineering, while solving a practical and complex problem such as the traffic in the cities.

System failure prediction through rare-events elastic-net logistic regression

Predicting failures in a distributed system based on previous events through logistic regression is a standard approach in literature. This technique is not reliable, though, in two situations: in the prediction of rare events, which do not appear in enough proportion for the algorithm to capture, and in environments where there are too many variables, as logistic regression tends to overfit on this situations; while manually selecting a subset of variables to create the model is error- prone. On this paper, we solve an industrial research case that presented this situation with a combination of elastic net logistic regression, a method that allows us to automatically select useful variables, a process of cross-validation on top of it and the application of a rare events prediction technique to reduce computation time. This process provides two layers of cross- validation that automatically obtain the optimal model complexity and the optimal mode l parameters values, while ensuring even rare events will be correctly predicted with a low amount of training instances. We tested this method against real industrial data, obtaining a total of 60 out of 80 possible models with a 90% average model accuracy.

Riding out of the storm: How to deal with the complexity of grid and cloud management

Over the last decade, Grid computing paved the way for a new level of large scale distributed systems. This infrastructure made it possible to securely and reliably take advantage of widely separated computational resources that are part of several different organizations. Resources can be incorporated to the Grid, building a theoretical virtual supercomputer. In time, cloud computing emerged as a new type of large scale distributed system, inheriting and expanding the expertise and knowledge that have been obtained so far. Some of the main characteristics of Grids naturally evolved into clouds, others were modified and adapted and others were simply discarded or postponed. Regardless of these technical specifics, both Grids and clouds together can be considered as one of the most important advances in large scale distributed computing of the past ten years; however, this step in distributed computing has came along with a completely new level of complexity. Grid and cloud management mechanisms play a key role, and correct analysis and understanding of the system behavior are needed. Large scale distributed systems must be able to self-manage, incorporating autonomic features capable of controlling and optimizing all resources and services. Traditional distributed computing management mechanisms analyze each resource separately and adjust specific parameters of each one of them. When trying to adapt the same procedures to Grid and cloud computing, the vast complexity of these systems can make this task extremely complicated. But large scale distributed systems complexity could only be a matter of perspective. It could be possible to understand the Grid or cloud behavior as a single entity, instead of a set of resources. This abstraction could provide a different understanding of the system, describing large scale behavior and global events that probably would not be detected analyzing each resource separately. In this work we define a theoretical framework that combines both ideas, multiple resources and single entity, to develop large scale distributed systems management techniques aimed at system performance optimization, increased dependability and Quality of Service (QoS). The resulting synergy could be the key 350 J. Montes et al. to address the most important difficulties of Grid and cloud management.

Procedimiento de diseño acústico y eletroacústico de sistemas tipo

El presente proyecto propone la creación de un procedimiento y metodología para el diseño de salas y sistemas electroacústicos basados en el software EASE. La sala tipo elegida para el diseño será una sala de cine bajo las premisas de DOLBY Digital. Los sistemas electroacústicos modelo serán: • Sistema distribuido tanto en malla cuadrada como hexagonal • Sistemas centralizados basados en agrupaciones, tanto lineales como circulares. Se establecerán los pasos básicos imprescindibles para el diseño de los sistemas descritos de forma que, con la ayuda de este tutorial y los medios didácticos adjuntos al mismo, se puedan acometer paso a paso las distintas fases de diseño, cálculo y análisis de los mismos. Como metodología de trabajo se acometerá el proceso de diseño de un ejemplo de cada tipo sobre el que se describirán todos los pasos, posibilidades de diseño y cálculo de los mismos. Los puntos de estudio serán: • Diseño de una sala de Cine ◦Importación de los Ficheros Autocad del cine a EASE ◦Dibujo del recinto en EASE ◦Inserción de materiales ◦Cálculo del tiempo de reverberación en función del volumen de la sala ◦Ajuste del tiempo de reverberación ◦Elección de altavoces para la sonorización ◦Comprobación de la uniformidad de campo sonoro en todos los canales ◦Comprobación de los niveles de pico y total por canal ◦Ecualización de la sala según la curva X (ISO-2969) ◦Inclusión de la Pantalla en la curva de ecualización ◦Estudios psicoacústico de la sala. Retardos ◦Inteligibilidad ◦Diagrama de bloques • Diseño de un sistema distribuido ◦Estudio de los diferentes tipos de solapamientos ▪Borde con Borde ▪Solapamiento mínimo ▪Centro con Centro ◦Estudio de los diferente tipos de mallas ▪Cuadrada ▪Hexagonal • Diseño de un sistema Centralizado ◦Sistemas centralizados tipo Linear Array ◦Sistemas centralizados tipo Circular Array Así mismo se estudiarán las diferentes posibilidades dentro de la suite EASE, incluyendo las versiones gratuitas del mismo EASE ADDRESS (sistemas distribuidos) y FOCUS II (sistemas centralizados), comparando sus posibilidades con los módulos comerciales equivalentes de EASE y las herramientas añadidas del mismo EARS (software para la auralización biaural) y AURA (utilidad de análisis extendido). ABSTRACT This project proposes the creation of a procedure and methodology for the design of rooms and electroacoustic systems based on EASE software. The room chosen as example design is a cinema under DOLBY Digital premises. Electroacoustic systems chosen as example are: • Distributed both square and hexagonal mesh • Centralized systems based on clusters, both linear and circular. It will be established the basic essential steps for the design of the systems described so, with this tutorial and attached teaching aids, could be undertaken the various stages of design, calculation and analysis. As a working methodology, the process design of an example will be described of each system on which all the steps described, design possibilities and calculation will be shown. The main points are: • Design of a cinema • Importing Autocad Files in EASE • Drawing with EASE • Materials insertion • Reverberation time based on the room volume • Adjusting reverberation time • Choosing speakers • Checking sound field uniformity in all channels • Checking peak levels and total level per each channel • Room equalization using X curve (ISO-2969) • Adding screen in the EQ • Psychoacoustic. Delays • Intelligibility • Block diagram • Design of a distributed system • Study of the different types of overlap o Edge to Edge o Minimum Overlap o Center to Center • Study of different types of mesh • Square • Hex • Centralized System Design • Centralized systems. Linear Array • Centralized systems. Circular Array It also will explore the different possibilities within the EASE suite, including the free versions of the same EASE ADDRESS (distributed systems) and FOCUS II (centralized), comparing its potential with commercial equivalents EASE modules and added tools EARS (software for biaural auralization) and AURA (utility extended analysis).

CloudRoom: una plataforma universitaria social, semántica y ubicua

Estamos viviendo la era de la Internetificación. A día de hoy, las conexiones a Internet se asumen presentes en nuestro entorno como una necesidad más. La Web, se ha convertido en un lugar de generación de contenido por los usuarios. Una información generada, que sobrepasa la idea con la que surgió esta, ya que en la mayoría de casos, su contenido no se ha diseñado más que para ser consumido por humanos, y no por máquinas. Esto supone un cambio de mentalidad en la forma en que diseñamos sistemas capaces de soportar una carga computacional y de almacenamiento que crece sin un fin aparente. Al mismo tiempo, vivimos un momento de crisis de la educación superior: los altos costes de una educación de calidad suponen una amenaza para el mundo académico. Mediante el uso de la tecnología, se puede lograr un incremento de la productividad, y una reducción en dichos costes en un campo, en el que apenas se ha avanzado desde el Renacimiento. En CloudRoom se ha diseñado una plataforma MOOC con una arquitectura ajustada a las últimas convenciones en Cloud Computing, que implica el uso de Servicios REST, bases de datos NoSQL, y que hace uso de las últimas recomendaciones del W3C en materia de desarrollo web y Linked Data. Para su construcción, se ha hecho uso de métodos ágiles de Ingeniería del Software, técnicas de Interacción Persona-Ordenador, y tecnologías de última generación como Neo4j, Redis, Node.js, AngularJS, Bootstrap, HTML5, CSS3 o Amazon Web Services. Se ha realizado un trabajo integral de Ingeniería Informática, combinando prácticamente la totalidad de aquellas áreas de conocimiento fundamentales en Informática. En definitiva se han ideado las bases de un sistema distribuido robusto, mantenible, con características sociales y semánticas, que puede ser ejecutado en múltiples dispositivos, y que es capaz de responder ante millones de usuarios. We are living through an age of Internetification. Nowadays, Internet connections are a utility whose presence one can simply assume. The web has become a place of generation of content by users. The information generated surpasses the notion with which the World Wide Web emerged because, in most cases, this content has been designed to be consumed by humans and not by machines. This fact implies a change of mindset in the way that we design systems; these systems should be able to support a computational and storage capacity that apparently grows endlessly. At the same time, our education system is in a state of crisis: the high costs of high-quality education threaten the academic world. With the use of technology, we could achieve an increase of productivity and quality, and a reduction of these costs in this field, which has remained largely unchanged since the Renaissance. In CloudRoom, a MOOC platform has been designed with an architecture that satisfies the last conventions on Cloud Computing; which involves the use of REST services, NoSQL databases, and uses the last recommendations from W3C in terms of web development and Linked Data. For its building process, agile methods of Software Engineering, Human-Computer Interaction techniques, and state of the art technologies such as Neo4j, Redis, Node.js, AngularJS, Bootstrap, HTML5, CSS3 or Amazon Web Services have been used. Furthermore, a comprehensive Informatics Engineering work has been performed, by combining virtually all of the areas of knowledge in Computer Science. Summarizing, the pillars of a robust, maintainable, and distributed system have been devised; a system with social and semantic capabilities, which runs in multiple devices, and scales to millions of users.

A scalable approach for content based image retrieval in cloud datacenter

The emergence of cloud datacenters enhances the capability of online data storage. Since massive data is stored in datacenters, it is necessary to effectively locate and access interest data in such a distributed system. However, traditional search techniques only allow users to search images over exact-match keywords through a centralized index. These techniques cannot satisfy the requirements of content based image retrieval (CBIR). In this paper, we propose a scalable image retrieval framework which can efficiently support content similarity search and semantic search in the distributed environment. Its key idea is to integrate image feature vectors into distributed hash tables (DHTs) by exploiting the property of locality sensitive hashing (LSH). Thus, images with similar content are most likely gathered into the same node without the knowledge of any global information. For searching semantically close images, the relevance feedback is adopted in our system to overcome the gap between low-level features and high-level features. We show that our approach yields high recall rate with good load balance and only requires a few number of hops.

Impedance-based stability and transient-performance assessment applying maximum peak criteria

The impedance-based stability-assessment method has turned out to be a very effective tool and its usage is rapidly growing in different applications ranging from the conventional interconnected dc/dc systems to the grid-connected renewable energy systems. The results are sometime given as a certain forbidden region in the complex plane out of which the impedance ratio--known as minor-loop gain--shall stay for ensuring robust stability. This letter discusses the circle-like forbidden region occupying minimum area in the complex plane, defined by applying maximum peak criteria, which is well-known theory in control engineering. The investigation shows that the circle-like forbidden region will ensure robust stability only if the impedance-based minor-loop gain is determined at the very input or output of each subsystem within the interconnected system. Experimental evidence is provided based on a small-scale dc/dc distributed system.

Diseño de una arquitectura escalable y de alta disponibilidad para un sistema middleware

El objetivo de este proyecto es el estudio de soluciones de escalabilidad y alta disponibilidad en sistemas distribuidos, así como su implantación en aquel de los sistemas analizados por Telefónica Digital, PopBox y Rush, que se consideré más adecuado. Actualmente, muchos servicios y aplicaciones están alojados directamente en laWeb, permitiendo abaratar el uso de ciertos servicios y mejorando la productividad y la competitividad de las empresas que los usan. Este crecimiento de las tecnologías en cloud experimentado en los últimos años plantea la necesidad de realizar sistemas que sean escalables, fiables y estén disponibles la mayor parte del tiempo posible. Un fallo en el servicio no afecta a una sola empresa, sino a todas las que están haciendo uso de dicho servicio. A lo largo de este proyecto se estudiarán las soluciones de alta disponibilidad y escalabilidad implementadas en varios sistemas distribuidos y se realizará una evaluación crítica de cada una de ellas. También se analizará la idoneidad de estas soluciones para los sistemas en los que posteriormente se aplicarán: PopBox y Rush. Se han diseñado diferentes soluciones para las plataformas implicadas, siguiendo varias aproximaciones y realizando un análisis exhaustivo de cada una de ellas, teniendo en cuenta el rendimiento y fiabilidad de cada aproximación. Una vez se ha determinado cuál es la estrategia más adecuada, se ha realizado una implementación fiable del sistema. Para cada uno de los módulos implementados se ha llevado a cabo una fase de testing unitario y de integración para asegurar el buen comportamiento del sistema y la integridad de éste cuando se realicen cambios. Específicamente, los objetivos que se alcanzarán son los siguientes: 1. Análisis exhaustivo de los sistemas de escalabilidad y alta escalabilidad que existen actualmente. 2. Diseño de una solución general HA1 y escalable teniendo en cuenta el objetivo anterior. 3. Análisis de la idoneidad de los sistemas PopBox y Rush para el diseño de un entorno distribuido escalable. 4. Diseño e implantación de una solución ad-hoc en el sistema elegido. ---ABSTRACT---The aim of this project is the study of solutions in scalability and high availability in distributed systems, and also its implementation in one of the systems developed y Telefónica I+D, PopBox and Rush, deemed more suitable. Nowadays, a lot of services and applications are stored directly in the Web, allowing companies to reduce the costs of using certain services and improving the productivity and competitiveness of those who use these services. This increase of the use of cloud tecnologies experimented in the last few years has led to the need of developing high available, scalable, and reliable systems. A failure in the service does not affect a single company but all the companies using this service. Throughout this project, I will study several solutions in High Availability and Scalability developed in some distributed systems and I will make a critic analysis of each one. Also I will analize the suitability of these solutions in the systems in which they will be applied: PopBox and Rush. I have designed different solutions for the platforms involved, following several approaches and making an exhaustive analysis of each one, taking into account their performance and reliability of each approach. Once I had determined which is the best strategy, I have developed a reliable implementation of the system. For each module implemented, I have carried out a set of unitary and integration tests to ensure the good behaviour of the system and the integrity of it when it changes. Specifically, the objectives to be achieved are as follows: 1. Exhaustive analysis of the systems in scalability and high availability that currently exist. 2. Design of a general solution taking into account the previous point. 3. Analysis of the suitability of the sistems PopBox and Rush for the design of a scalable distributed system. 4. Design and implementation of an ad-hoc solution in the chosen system.

Implementación de sistema domótico con servidor Raspberry

Este proyecto consiste en el diseño e implementación un sistema domótico que puede ser instalado en una vivienda para controlar distintas variables ambientales y conseguir así la máxima comodidad de los habitantes de manera automática o manual según los gustos y necesidades de los usuarios. La característica principal de este sistema, es que cuenta con un funcionamiento distribuido donde entran en juego un servidor, encargado de tomar las decisiones generales para el comportamiento de la casa, y una serie de controladores esclavo cuya función es mantener constantes las variables ambientales con los valores fijados por el servidor. Así se consigue mantener la vivienda en una situación de bienestar constante para cualquier persona que se encuentre dentro. El sistema ha sido pensado de manera que se intenta reducir al máximo el cableado para facilitar su instalación por lo que la comunicación entre los distintos dispositivos se hace de manera inalámbrica por medio de un protocolo descrito en la norma IEEE 802.15.4 llamado ZigBee. Para ello se ha utilizado un módulo de comunicación wireless llamado Xbee, el cual permite la comunicación entre dos dispositivos. Para el control de dicho sistema distribuido se cuenta con una aplicación web, que mediante una interfaz gráfica permite al usuario controlar los distintos dispositivos dentro de la vivienda consiguiendo así controlar las variables ambientales a gusto del usuario. Dicha interfaz gráfica no depende de un software específico, sino que sólo es necesario un cliente http como podría ser Internet Explorer, Mozilla Firefox, Google Chrome, etc. Para integrar dicho sistema se ha usado un mini ordenador de bajo coste llamado RaspBerryPi, en el que se encuentra alojado un servidor Apache con el fin de gestionar y automatizar las variables ambientales. El control de los dipositivos encargados de modificar y estabilizar las variables ambientales se realiza mediante unos controladores genéricos implementados mediante mcontroladores 80C51F410, pertenecientes a la familia 80C51, y una serie de componentes y circuitería que permiten el correcto funcionamiento de éstos. Existen dos tipos de controladores distintos, los cuales son: Controlador Sensor: Encargados de las tomas de valores ambientales como puede ser la luz y la temperatura. Controladores Actuadores: Encargados de actuar sobre los dispositivos que modifican y estabilizan las variables ambientales como pueden ser la calefacción, tiras de leds de iluminación, persianas, alarmas, etc. El conjunto de la RaspBerryPi y los diferentes controladores forman el prototipo diseñado para este proyecto fin de carrera, el cual puede ser ampliado sencillamente para abarcar una amplia gama de posibilidades y funcionalidades dentro de la comodidad de una vivienda. ABSTRACT. The project described in this report consisted designing and implementing a home automation system that could be installed in a house in order to control environmental variables and thus get the maximum comfort of the inhabitant automatically or manually according to their tastes and needs. The main feature of this system consists in a distributed system, formed by a server which is responsible for making the main decisions of the actions performed inside the house. In addition, there are a series of slave controlers whose function consists in keeping the environmental variables within the values established by the server. Thus gets to keep the home in a situation of constant wellbeing to anyone who is inside. The system has been designed in order to reduce the amount of wire needed for the inter-connection of the devices, by means of wireless communication. The devices chosen for the solution are Xbee modules, which use the Zigbee protocol in order to comunicate one between each other. The Zigbee protocol is fully described in the IEEE 802.15.4 standard. A web application has been used to control the distributed system. This application allows users to control various devices inside the house and subsequently the different environmental variables. This implementation allows obtaining the maximum comfort by means of a very simple graphical interface. In addition, the Graphical User Interface (GUI) does not depend on any specific software. This means that it would only be necessary a http client (such as Internet Explorer, Mozilla Firefox, Google Chrome, etc.) for handling the application. The system has been integrated using a low-cost mini computer called RaspBerryPi.This computer has an Apache server allocated which allows to manage and to automatize the different environmental variables. Furthermore, for changing and stabilizing those variables, some generic controllers have been developed, based on mcontrollers 80C51F410. There have been developed mainly two different types of controllers: Sensor Controllers, responsible for measuring the different environmental values, such as light and temperature; and Actuator Controllers, which purpose is to modify and stabilize those environmental variables by actuating on the heating, the led lamps, the blinders, the alarm, etc. The combination of the RaspBerryPi and the different controllers conform the prototype designed during this project. Additionally, this solution could be easily expanded in order to intake further functionalities adapted to new needs that could arise in the future.

Compilador de consultas tipo SQL para sistema de procesamiento masivo de eventos CEP

El paradigma de procesamiento de eventos CEP plantea la solución al reto del análisis de grandes cantidades de datos en tiempo real, como por ejemplo, monitorización de los valores de bolsa o el estado del tráfico de carreteras. En este paradigma los eventos recibidos deben procesarse sin almacenarse debido a que el volumen de datos es demasiado elevado y a las necesidades de baja latencia. Para ello se utilizan sistemas distribuidos con una alta escalabilidad, elevado throughput y baja latencia. Este tipo de sistemas son usualmente complejos y el tiempo de aprendizaje requerido para su uso es elevado. Sin embargo, muchos de estos sistemas carecen de un lenguaje declarativo de consultas en el que expresar la computación que se desea realizar sobre los eventos recibidos. En este trabajo se ha desarrollado un lenguaje declarativo de consultas similar a SQL y un compilador que realiza la traducción de este lenguaje al lenguaje nativo del sistema de procesamiento masivo de eventos. El lenguaje desarrollado en este trabajo es similar a SQL, con el que se encuentran familiarizados un gran número de desarrolladores y por tanto aprender este lenguaje no supondría un gran esfuerzo. Así el uso de este lenguaje logra reducir los errores en ejecución de la consulta desplegada sobre el sistema distribuido al tiempo que se abstrae al programador de los detalles de este sistema.---ABSTRACT---The complex event processing paradigm CEP has become the solution for high volume data analytics which demand scalability, high throughput, and low latency. Examples of applications which use this paradigm are financial processing or traffic monitoring. A distributed system is used to achieve the performance requisites. These same requisites force the distributed system not to store the events but to process them on the fly as they are received. These distributed systems are complex systems which require a considerably long time to learn and use. The majority of such distributed systems lack a declarative language in which to express the computation to perform over incoming events. In this work, a new SQL-like declarative language and a compiler have been developed. This compiler translates this new language to the distributed system native language. Due to its similarity with SQL a vast amount of developers who are already familiar with SQL will need little time to learn this language. Thus, this language reduces the execution failures at the time the programmer no longer needs to know every single detail of the underlying distributed system to submit a query.

Supervisión de un sistema de tiempo real distribuido

En el presente proyecto se propone la definición e implementación de un subsistema de monitorización para un sistema de tiempo real distribuido. Este monitor supervisará el estado de todos los componentes software y hardware del sistema original, y permitirá el arranque y parada de cada componente individualmente o del subsistema completo. Constará de dos componentes básicos: un supervisor local para cada subsistema, y un supervisor central con interfaz gráfica. El supervisor local es un componente software asociado a cada subsistema que realizará las funciones de monitorización, arranque/parada de los componentes y envío de informes al supervisor central. Atenderá además a los comandos de arranque y parada provenientes del supervisor central. El supervisor central recibirá los informes de estado de cada uno de los supervisores locales y permitirá el arranque y parada de los subsistemas. Contará con un interfaz gráfico a modo de posición de control. El sistema será desarrollado íntegramente (salvo la posición gráfica) en ADA95, y podrá ejecutarse en cualquiera de las distribuciones Linux más extendidas. En el contexto de Ingeniería de Software, se seguirá un desarrollo en cascada, aportándose los requisitos, el diseño, la codificación y un plan de pruebas. Abstract In this project, the definition and implementation of a monitoring system is proposed for a previously defined real-time distributed system. This supervisory system will monitor the status of each subsystem and its software and hardware components. This new system will also be able to start and stop each individual component and start or stop the entire system. It will consist of two basic components: a local supervisor for each subsystem, and a central supervisor with a graphical unit interface (GUI). The local supervisor will be a software component attached to each original subsystem, which will perform functions such as components monitoring, start and stop the associated subsystem, and sending reports to the central supervisor. It also will attend the start and stop commands from the central supervisor. The central supervisor will receive status reports from each of the local supervisors and will allow starting and stopping the subsystems. It will offer a graphical interface to be used as a main control panel. The system will be developed in ADA 95 (except the graphical position), and should work on any of the most common Linux distributions. In the context of Software Engineering, the project will be developed following a waterfall life cycle. Reports on the stages of requirements, design, coding and testing plan shall be provided.