Balancing groundwater conservation and rural livelihoods under water and climate uncertainties: An integrated hydro-economic modeling framework

In arid countries worldwide, social conflicts between irrigation-based human development and the conservation of aquatic ecosystems are widespread and attract many public debates. This research focuses on the analysis of water and agricultural policies aimed at conserving groundwater resources and maintaining rurallivelihoods in a basin in Spain's central arid region. Intensive groundwater mining for irrigation has caused overexploitation of the basin's large aquifer, the degradation of reputed wetlands and has given rise to notable social conflicts over the years. With the aim of tackling the multifaceted socio-ecological interactions of complex water systems, the methodology used in this study consists in a novel integration into a common platform of an economic optimization model and a hydrology model WEAP (Water Evaluation And Planning system). This robust tool is used to analyze the spatial and temporal effects of different water and agricultural policies under different climate scenarios. It permits the prediction of different climate and policy outcomes across farm types (water stress impacts and adaptation), at basin's level (aquifer recovery), and along the policies’ implementation horizon (short and long run). Results show that the region's current quota-based water policies may contribute to reduce water consumption in the farms but will not be able to recover the aquifer and will inflict income losses to the rural communities. This situation would worsen in case of drought. Economies of scale and technology are evidenced as larger farms with cropping diversification and those equipped with modern irrigation will better adapt to water stress conditions. However, the long-term sustainability of the aquifer and the maintenance of rurallivelihoods will be attained only if additional policy measures are put in place such as the control of illegal abstractions and the establishing of a water bank. Within the policy domain, the research contributes to the new sustainable development strategy of the EU by concluding that, in water-scarce regions, effective integration of water and agricultural policies is essential for achieving the water protection objectives of the EU policies. Therefore, the design and enforcement of well-balanced region-specific polices is a major task faced by policy makers for achieving successful water management that will ensure nature protection and human development at tolerable social costs. From a methodological perspective, this research initiative contributes to better address hydrological questions as well as economic and social issues in complex water and human systems. Its integrated vision provides a valuable illustration to inform water policy and management decisions within contexts of water-related conflicts worldwide.

Study and Restoration Proposal for the Maison en Bord de Mer: E.1027 by Eileen Gray and Jean Badovici

This study constitutes an establishment of the main guidelines for the restoration of modern architecture, considering the E.1027 Maison en Bord de Meras a prototype for theortical and technical features. E.1027 Maison en Bord de Mer is a small villa built by Eileen Gray and Jean Badovici between 1926 and 1929 in Roquebrune Cap-Martin, France. Later on, the original project was modified because of successive interventions, altering the spatial qualities until being eventually abandoned in 2008. As a consequence of these variations, a meticulous documentation of the building turns essential in order to undertake its restoration. For that purpose, a description of the house and its historical evolution has been made, comparing plans of its different transformations and ending with a detailed survey of the current state. After presenting the particular pathologies of Cray's villa, the research concludes with the restoration proposal for E.1027 itself

Availability and uptake of trace elements in a forage rotation under conservation and plough tillage

After 14 years under conventional plough tillage (CT) or conservation minimum tillage (MT), the soil available Al, Fe, Mn, Cu and Zn (0-5, 5-15 and 15-30 cm layers) and their plant uptake were evaluated during two years in a ryegrass-maize forage rotation in NW Spain (t emperate-humid region). The three-way ANOVA showed that trace element concentrations in soil were mainly influenced by sampling date, followed by soil depth and tillage system (35-73 %, 7-58 % and 3- 11 % of variance explained, respectively). Excepting for Fe (CT) and Al (CT and MT), the elemental concentrations decreased with depth, the stratification being stronger under MT. For soil available Al, Fe, Mn and Cu, the concentrations were higher in CT than in MT (5-15 and 15-30 cm layers) or were not affected by tillage system (0-5 cm). In contrast, the available Zn contents were higher in MT than CT at the soil surface and did not differ in deeper layers. The concentration of Al, Fe and Cu in crops were not influenced by tillage system, which explain 22 % of Mn variance in maize (CT > MT in the more humid year) and 18 % of Zn variance in ryegrass (MT > CT in both years). However, in the summer crop (maize) the concentrations of Fe, Mn and Zn tended to be higher in MT than in CT under drought conditions, while the opposite was true in the year without water limitation. Therefore, under the studied conditions of climate, soil, tillage and crop rotation, little influence of tillage system on crop nutritive value would be expected. To minimize the potential deficiency of Zn (maize) and Cu (maize and ryegrass) on crop yields the inclusion of these micro-nutrients in fertilization schedule is reco mmended, as well as liming to alleviate Al toxicity on maize crops.

Pinus uncinata Ramond ex DC.: Conservation and proposal of management at its southwestern limit of distribution (Castillo de Vinuesa, Soria, Spain)

Pinus uncinata forms forests in the centre and southwest of the Alps and in the subalpine Pyrenees (at around 1700 – 2600 m) (Costa Tenorio et al., 1997). The species reaches the southwestern limit of its distribution at the top of Mount Castillo de Vinuesa (Soria, Spain). The small population on this mountain occupies just 66 ha, but is very important from a geobotanical viewpoint since it is just one of two populations (the other being in the Sierra de Gúdar range in Teruel, Spain) isolated from the main area where the species is found in the Iberian Peninsula (The Pyrenees)

Forest Hydrology, Soil Conservation and Green Barriers in Canary Islands

In volcanic islands, the rainfall regime and its torrential nature, together with the steep slopes and the soil types present are considered to be some of the main factors affecting forest hydrology and soil conservation. In such environments, rain regime is generally irregular and characterized by short and intense rainfalls, which could cause destructive flows at times, followed by long periods of rain absence. The volcanic nature of these islands have as a direct resultant steep slopes which influences the runoff volume and speed, as well as the amount of topsoil susceptible to be detached and transported downstream. The soil type also affects the susceptibility to erosion processes. Andisols are the most typical soil on volcanic islands. Their particularities derive their mineral constituents, called short-range-order products, which provide these soils with an increased structural stability, which in turn reduces their susceptibility to erosion. However, the land use changes and the environmental factors such as rain regime and steep slopes may be determinant factor in destabilizing these soils and ultimately a cause for soil erosion and runoffs, which become a threat to the population downstream. Green barriers have been traditionally used to prevent or reduce these processes, also to enhance the dew effect and the fog water collection, and as a firebreak which acts as a barrier to slow or stop the progress of a wildfire. Wooded species present and subsequently their performance have a major influence on their effectiveness. The use of this natural erosion and fire control methods on volcanic islands is discussed in this paper.

An abstract machine based execution model for computer architecture design and efficient implementation of logic programs in parallel.

The term "Logic Programming" refers to a variety of computer languages and execution models which are based on the traditional concept of Symbolic Logic. The expressive power of these languages offers promise to be of great assistance in facing the programming challenges of present and future symbolic processing applications in Artificial Intelligence, Knowledge-based systems, and many other areas of computing. The sequential execution speed of logic programs has been greatly improved since the advent of the first interpreters. However, higher inference speeds are still required in order to meet the demands of applications such as those contemplated for next generation computer systems. The execution of logic programs in parallel is currently considered a promising strategy for attaining such inference speeds. Logic Programming in turn appears as a suitable programming paradigm for parallel architectures because of the many opportunities for parallel execution present in the implementation of logic programs. This dissertation presents an efficient parallel execution model for logic programs. The model is described from the source language level down to an "Abstract Machine" level suitable for direct implementation on existing parallel systems or for the design of special purpose parallel architectures. Few assumptions are made at the source language level and therefore the techniques developed and the general Abstract Machine design are applicable to a variety of logic (and also functional) languages. These techniques offer efficient solutions to several areas of parallel Logic Programming implementation previously considered problematic or a source of considerable overhead, such as the detection and handling of variable binding conflicts in AND-Parallelism, the specification of control and management of the execution tree, the treatment of distributed backtracking, and goal scheduling and memory management issues, etc. A parallel Abstract Machine design is offered, specifying data areas, operation, and a suitable instruction set. This design is based on extending to a parallel environment the techniques introduced by the Warren Abstract Machine, which have already made very fast and space efficient sequential systems a reality. Therefore, the model herein presented is capable of retaining sequential execution speed similar to that of high performance sequential systems, while extracting additional gains in speed by efficiently implementing parallel execution. These claims are supported by simulations of the Abstract Machine on sample programs.

TEACHING STRATEGIES IN THE MSc PROGRAME IN CLIMATE CHANGE AND RESTORATION ON DEGRADED LAND

UPM is a leader on landslide assessment and environmental restoration, as well as in waste management. The study of climate change and degraded land requires innovative techniques in teaching that will be analyzed and discussed in the following paper.

3-Phase Rectifier System with very demanding dynamic load: Architecture analysis and control strategy

A distributed power architecture for aerospace application with very restrictive specifications is analyzed. Parameters as volume, weight and losses are analyzed for the considered power architectures. In order to protect the 3 phase generator against high load steps, an intermediate bus (based in a high capacitance) to provide energy to the loads during the high load steps is included. Prototypes of the selected architecture for the rectifier and EMI filter are built and the energy control is validated.

Climate Change and Restoration of Degraded Land

The United Nations Climate Change Conference, Durban 2011, delivered a breakthrough on the international community's response to climate change. In the second largest meeting of its kind, the negotiations advanced, in a balanced fashion, the implementation of the Convention and the Kyoto Protocol, the Bali Action Plan, and the Cancun Agreements. The outcomes included a decision by Parties to adopt a universal legal agreement on climate change as soon as possible, and no later than 2015. One of the decisions adopted by COP 17 and CMP 7 regard to the land use, land-use change and forestry, and invites the Intergovernmental Panel on Climate Change to review and, if necessary, update supplementary methodologies for estimating anthropogenic greenhouse gas emissions by sources and removals by sinks resulting from land use, land-use change and forestry activities under Article 3, paragraphs 3 and 4, of the Kyoto Protocol. Land degradation is a human-induced or natural process which negatively affects the productivity of land within an ecosystem. The direct causes of land degradation are geographically specific. Climate change, including changes in short-term variation, as well as long-term gradual changes in temperature and precipitation, is expected to be an additional stress on rates of land degradation. Book Topics: • Introduction to Climate Change and Land Degradation • Change Mitigation • Climate Change and Waste Land Restoration • Water Management and Planning • Erosion and Hydrological Restoration • Forest Fire Land Restoration • Polluted Soils Restoration • Combating Climate Change by Restoration of Degraded Land • Research Matters – Climate Change Governance • Advanced Statistics Climate Change and Restoration of Degraded Land is of interests to academics, engineers, consultans, designers and professionals involved in restoration of degraded lands projects.

Bóvedas de crucería rebajadas hispanas: geometría, estructura y construcción

La arquitectura histórica constituye un ámbito de notable singularidad dentro del patrimonio cultural, ya que representa uno de los máximos exponentes de la cultura material de las sociedades precedentes. Su adecuada conservación y preservación debe ir necesariamente precedida de un riguroso y profundo conocimiento de sus valores culturales, de ahí la importancia de las investigaciones en este campo. Entre todos los elementos que configuran las edificaciones históricas, son probablemente las bóvedas los elementos más singulares, dada su relevancia desde un punto de vista tanto estético como estructural y constructivo. Hasta la fecha, los estudios centrados en los abovedamientos medievales góticos han aportado visiones generales del conjunto de obras, estableciendo las pertinentes clasificaciones y poniendo de manifiesto la notable variedad de tipos de bóvedas de crucería. La presente investigación tiene su origen en la necesidad de profundizar en el conocimiento de este sistema constructivo mediante el estudio específico y sistemático de un tipo concreto de abovedamiento: las bóvedas de crucería rebajadas que sustentan los coros altos de los templos. En concreto, el análisis se ha centrado en aquellos abovedamientos construidos en la Corona de Castilla durante los reinados de los Reyes Católicos y Carlos I, puesto que es en este momento de transición entre el mundo medieval y la Edad Moderna con una coexistencia de la tradición medieval y las nuevas ideas renacentistas cuando se crean las más singulares obras. Por lo tanto, el trabajo desarrollado se ha centrado en el estudio e interpretación de los procesos de diseño, trazado y construcción específicos de cada una de las bóvedas. Más allá de un enfoque descriptivo o basado en una visión actual, se ha tratado de profundizar en los métodos, sistemas y recursos que los maestros canteros emplearon, lo que ha obligado a adoptar en la medida de lo posible la mentalidad y conocimiento bajomedievales. Con estas premisas se ha desarrollado una investigación que necesariamente se ha apoyado en la contextualización histórica de cada una de las bóvedas, generándose un catálogo completo de las obras. Posteriormente, se ha desarrollado una toma de datos y un análisis individualizado de cada una de ellas, para poder obtener una interpretación de su proceso de diseño y construcción. Finalmente, se ha abordado un estudio comparativo del conjunto de las obras, poniendo en relación sus características históricas, geométricas, constructivas y estructurales. Ello ha permitido obtener unos resultados novedosos respecto a las principales cuestiones sobre el diseño y construcción de las bóvedas de crucería rebajadas, poniendo de relieve su singularidad y el profundo conocimiento de los maestros canteros que las crearon. De este modo, se ha pretendido avanzar en la investigación y sentar las bases para posteriores trabajos en el ámbito de los abovedamientos de crucería. Historical architecture is a quite singular field when considering cultural heritage, because it is one of the most important exponents of the material culture previous societies. Its proper conservation and restoration must be preceded of a rigorous and deep knowledge of the cultural values, and that is why researches in this fi eld are very important. The study of historical architecture has been developed traditionally from the viewpoint of History of Art and Architecture. Thanks to such discipline, it has been possible to establish and systematize several architectonical types and styles. However, there has been a lack in relationship with the analyses focused on the structural and constructive historical systems, which has been recently compensated by the gradual development of the discipline of Construction History. Among the several elements which form the historical buildings, the vaults are probably the most singular elements, thanks to their aesthetic, constructive and structural relevance. To date, the studies focused on the medieval gothic vaults have provided general visions of the whole group of works, which has allowed defi ning the proper classifi cations and underlining the great variety of kinds of ribbed vaults. The present research has its origin in the need of a deeper knowledge of this specific constructive system. For that reason, a specifi c and systematic analysis of a particular kind of vaults has been developed. It is focused on the surbased ribbed vaults which support the elevated choirs of some churches. In particular, it includes the works built in the Crown of Castille during the kingdoms of Catholic Kings and Carlos I, because at this precise moment of transition from the medieval world into de Modern Age with a coexistence of the medieval tradition and the new classicistic ideas the most singular and relevant surbased vaults were built. In this way, the analysis has been focused in the study and interpretation of the design, tracing and construction methods of each vault. More than a descriptive approach or an analysis based on our contemporary point of view and knowledge, this research has studied the methods, systems and resources of master masons in depth. Then, it has been necessary to adopt as much as possible their mentality, as well as the late medieval knowledge. With the above mentioned premises, the research has been developed including the historical contextualization of each vault, providing also a complete catalogue of such works. After obtaining the proper survey, measurements and other complementary data, each one has been analyzed in order to develop a hypothesis of the design and construction process. Finally, a comparative study has been carried out, which has allowed putting in relationship the historical, geometrical, constructive and structural features of the whole group of vaults. This research has provided novel results about de design and construction of surbased ribbed vaults, underlining their singularity as well as the deep knowledge of master masons who created them. In this way, we have tried to go further in this scientific field and to set the basis for latter researches focused on ribbed vaults.

Mapping Genetic Diversity of Cherimoya (Annona cherimola Mill.): Application of Spatial Analysis for Conservation and Use of Plant Genetic Resources.

There is a growing call for inventories that evaluate geographic patterns in diversity of plant genetic resources maintained on farm and in species' natural populations in order to enhance their use and conservation. Such evaluations are relevant for useful tropical and subtropical tree species, as many of these species are still undomesticated, or in incipient stages of domestication and local populations can offer yet-unknown traits of high value to further domestication. For many outcrossing species, such as most trees, inbreeding depression can be an issue, and genetic diversity is important to sustain local production. Diversity is also crucial for species to adapt to environmental changes. This paper explores the possibilities of incorporating molecular marker data into Geographic Information Systems (GIS) to allow visualization and better understanding of spatial patterns of genetic diversity as a key input to optimize conservation and use of plant genetic resources, based on a case study of cherimoya (Annona cherimola Mill.), a Neotropical fruit tree species. We present spatial analyses to (1) improve the understanding of spatial distribution of genetic diversity of cherimoya natural stands and cultivated trees in Ecuador, Bolivia and Peru based on microsatellite molecular markers (SSRs); and (2) formulate optimal conservation strategies by revealing priority areas for in situ conservation, and identifying existing diversity gaps in ex situ collections. We found high levels of allelic richness, locally common alleles and expected heterozygosity in cherimoya's putative centre of origin, southern Ecuador and northern Peru, whereas levels of diversity in southern Peru and especially in Bolivia were significantly lower. The application of GIS on a large microsatellite dataset allows a more detailed prioritization of areas for in situ conservation and targeted collection across the Andean distribution range of cherimoya than previous studies could do, i.e. at province and department level in Ecuador and Peru, respectively.

Naturaleza, ética, y arquitectura: Autenticidad y criterios éticos que integran el desarrollo de una arquitectura más sostenible = Nature, ethics and architecture: Authenticity and ethics criteria that integrate the development of a more sustainable architecture

La ecología no solamente ha puesto de manifiesto problemas ambientales, sino que ha confirmado la necesidad de una nueva armonía entre los propios seres humanos y de éstos con la naturaleza y con todos los seres que la habitan. Es necesario un nuevo contrato que determine nuestras relaciones con la Naturaleza (Serrs1), y una nueva Ética para nuestras vidas (Guattari2). La ética medioambiental nos ha dado una visión universal y supra-generacional de la gestión de la naturaleza y como consecuencia, una nueva forma de construir nuestra ‘segunda’ Naturaleza, que es la arquitectura. ¿Qué es lo esencial que esta nueva ética exige para la arquitectura? Este es un momento crucial para reconsiderar los objetivos de la arquitectura, porque lo ‘eco’ está produciendo grandes cambios. ¿Implica esta era post-ecológica una particular ética, es decir, referida a sus fines y medios? ¿Porqué, para qué, para quién, cómo debemos hacer la arquitectura de nuestro tiempo? Es momento de afrontar críticamente el discurso de la eco-arquitectura, e incluso de repensar los propios límites de la arquitectura. El desarrollo actual del conocimiento medioambiental es esencialmente técnico y utilitario, pero ¿es el reto solamente técnico?¿Es suficiente la suma de lo medioambiental-social-económico-cultural para definirla? ¿Hay claves que nos puedan dar la dimensión ética de esta aproximación técnica-empírica? ¿Sabemos lo que estamos haciendo cuando aplicamos este conocimiento? Y, sobre todo, ¿cuál es el sentido de lo que estamos haciendo? La tesis que se propone puede resumirse: De acuerdo con el actual conocimiento que tenemos de la Naturaleza, la Arquitectura de nuestro tiempo deber reconsiderar sus fines y medios, puesto que la ética medioambiental está definiendo nuevos objetivos. Para fundamentar y profundizar en esta afirmación la tesis analiza cómo son hoy día las relaciones entre Ética-Naturaleza-Arquitectura (Fig.1), lo que facilitará las claves de cuáles son los criterios éticos (en cuanto a fines y medios) que deben definir la arquitectura del tiempo de la ecología. ABSTRACT Ecology shows us not only environmental problems; it shows that we need a new balance and harmony between individuals, beings, communities and Nature. We need a new contract with Nature according to Serres576, and a new Ethics for our lives according to Guattari577. Environmental ethics have given us a universal and supra-generational vision of the management of our Nature and, as a consequence, a new way to construct our ‘second’ nature, which is architecture. What is essential for this new architecture that the new ethics demand? This is a critical moment to reconsider the object of architecture, because the ‘eco’ is making significant changes in it. Are there any specifically ethical concerns (ends and means) in the post-ecological era? Why, for what, for whom, how should we make architecture in our times? This is the time to approach the eco-architectural discourse critically and to question the current boundaries of architecture itself: Where is eco-architecture going? The current development of environmental knowledge is essentially technical and utilitarian, but it is its technical aspect the only challenge? Is the sum of environmental-social-economic aspects enough to define it? Are there any clues which can give an ethical sense to this technical-empirical approach? Do we know what we are doing when we apply this knowledge? And overall, what is the meaning of what we are doing? Exploring this subject, this thesis makes a statement: In accordance with the actual knowledge of Nature, Architecture of our time must reconsider its ends and means, since the environmental ethics is defining new objectives. To support that, the thesis analyzes what the relationships between Ethics –Nature- Architecture (Fig. 53) are like nowadays, this will provide the clues of which ethical criteria (ends and means) must architecture of an ecological era define.

Taxonomía de la evolución arquitectónica 'Architecture 2000 and beyond'

Architecture 2000, publicado por Charles Jencks originalmente en el año 1971, es un libro cuyo objetivo explícito es predecir el futuro de la arquitectura hasta el fi nal del siglo XX y este hecho ha favorecido que se haya editado por segunda vez precisamente ese emblemático año 2000, manteniendo fundamentalmente el contenido original, aunque añadiendo una introducción y un capítulo final en los que se ofrece una evaluación de lo dicho treinta años antes. En este nuevo Architecture 2000, Jencks añade al texto principal sus comentarios sobre lo acertado o erróneo de sus predicciones anteriores, juzgadas ahora a la luz de los hechos acontecidos y actualiza su mapa evolutivo con una nueva versión de su anterior Evolutionary Tree to the year 2000, que ahora pasará a denominarse Evolutionary Tree of the 20th century architecture. No hay duda de que lo más infl uyente y duradero de la obra de Jencks ha sido la representación gráfica de la evolución de la arquitectura a través de sus evolutionary trees. Pero, aunque Architecture 2000 debe ser valorada sobre todo como una aportación imprescindible para entender la arquitectura de la segunda mitad del siglo XX, tanto por su identifi cación de las tendencias a través de los que se han conducido las experiencias de los profesionales como por su concepción dinámica de la arquitectura plasmada gráfi camente a través de sus evolutionary trees, sería un error considerarla como mera historia y dar por amortizados los métodos prospectivos o los juicios y expectativas del autor sobre lo acontecido en la arquitectura a lo largo de las últimas décadas.

Juan Bautista Lázaro y la restauración monumental: su intervención en la Catedral de León (1892-1909)

La catedral de León, debido al estado de ruina que presentaba a mediados del siglo XIX, se vio sometida a partir de entonces a una serie de intervenciones de conservación, restauración y reconstrucción que la transforma-ron significativamente. A pesar de encontrarnos con gran cantidad de documentación escrita sobre este monumento y de existir varios estudios sobre los arquitectos restauradores que intervinieron en este a finales del siglo XIX, resulta sorprendente que todavía existan períodos de este lapso de tiempo en el que su análisis y profundización haya sido menor. Este es el caso del período de Juan Bautista Lázaro como arquitecto director de las obras de la catedral leonesa, existiendo únicamente sobre toda su obra un estudio general que fue realizado por el director de este trabajo de investigación, por lo que nos llevó a considerar que era oportuno profundizar sobre la figura y obra de uno de los arquitectos más importante de la restauración en España de este período, no solo por su obra en sí, sino también por sus pos-turas significativas respecto a la intervención en el patrimonio arquitectónico: su respeto por los añadidos históricos, su preferencia por no aislar los monumentos, sus interés por los sistemas constructivos y su deseo de recuperar los oficios tradicionales que estaban completamente perdidos en la España decimonónica. El objetivo principal de la tesis es, por tanto, el análisis descriptivo y arquitectónico de los proyectos e intervenciones que Lázaro desarrolló y ejecutó para la catedral de Santa María de Regla de León, para deducir los principios e ideas que guiaron su quehacer en este templo, y poder, tras estudiar sus diversas publicaciones escritas y los proyectos e intervenciones de restauración acometidas en otros edificios de carácter monumental, llegar a establecer sus criterios de intervención en el patrimonio histórico y artístico. De acuerdo con esto, la tesis se estructura en tres partes: una primera parte en la que se contempla el pensamiento arquitectónico de Lázaro en su intervención en el patrimonio histórico; una segunda, en la que se abordan directamente los proyectos e intervenciones de Lázaro en la pulchra leonina, previa aproximación del citado arquitecto al proceso de restauración que se acometía en dicho templo; y una tercera, en la que se realiza el estudio de las principales intervenciones de restauración que ejecutó en otros edificios del patrimonio arquitectónico español. El presente trabajo de investigación se ha servido de la documentación escrita, gráfica, planimétrica y fotográfica que sobre los temas tratados existe desperdigada en diversos archivos dependientes de distintos organismos oficiales civiles y eclesiásticos. Además, el hecho de haber podido acceder a los trabajos de conservación y restauración que en estos momentos se están llevando a cabo en las zonas en las que intervino Lázaro (vidrieras, rejas, puertas, fábricas, cubiertas, etc.), y el poder intercambiar opiniones y criterios con la persona que actualmente es responsable de las obras de la catedral de León, ha facilitado y complementado el desarrollo de la presente tesis al haber podido contrastar y tomar datos directamente en el monumento objeto de estudio. También se ha llevado a cabo la consulta de las distintas revistas de arquitectura publicadas en aquellos años y de los múltiples libros que versaban sobre los edificios objeto de este trabajo o que guardaban relación con ellos. Asimismo hemos logrado conocer el testimonio de algunos de los herederos de Lázaro y de varios de los descendientes de los operarios que trabajaron bajo sus órdenes. Como conclusiones generales, la tesis define por primera vez los criterios generales que guiaron su quehacer profesional en el patrimonio. Además, en este trabajo se analizan pormenorizadamente los proyectos y actuaciones de Lázaro en la catedral de León, abordándose también en profundidad el trabajo del mencionado arquitecto en el ámbito de la restauración arquitectónica. Para lograr este objetivo, esta tesis no se ha limitado únicamente a analizar la información existente en los proyectos y en los in-formes de supervisión de los mismos, como tradicionalmente se había hecho, sino que también se ha tratado de verificar si los datos contenidos en los diferentes documentos de un mismo proyecto y en los borradores de los mismos tenían relación y coherencia entre sí. Además, se ha procurado realizar el análisis comparativo de la realidad construida con el contenido de los proyectos, liquidaciones y documentos de la fase de ejecución de las obras. Este análisis comparativo no había sido realizado hasta la fecha, siendo este, por tanto, una de las aportaciones del trabajo. Por último, la tesis abre tres vías de investigación futuras (que ya se han tratado y avanzado en parte, pero que escapan a los límites de este trabajo). Estas se refieren al estudio de la evolución de la representación gráfica de los planos de la catedral leonesa catalogados en este trabajo, de la actividad pública de Lázaro y su preocupación por la defensa del patrimonio como diputado en las Cortes, arquitecto municipal de Ávila y arquitecto diocesano de Ávila y Toledo, y de cómo sus actuaciones de restauración en el patrimonio arquitectónico influyeron en los proyectos de obra nueva que construyó. ABSTRACT Due to the state of ruin in mid-nineteenth century, the Cathedral of Santa Maria de Regla of León was subjected to a series of interventions on conservation, restoration and reconstruction that transformed it significantly. There have been several studies on the architects who took part in the restoration during the mentioned century and despite abundant documentation and research on this monument, it is surprising to note the lack of deep analysis in some of the periods. In particular, the interventions accomplished by Juan Bautista Lázaro, as chief architect of the works of the Cathedral of León, have not been documented and analysed in adequate depth, despite the outstanding recognition of his work nationally and internationally. Furthermore, up to date, only the director of this research had conducted a general research of all his architectural work. For these reasons, we felt it was appropriate to elaborate on the life and work of one of the most important architects of the restoration in Spain during that period, not only for his work itself, but also for his significant contribution to the debate on architectural interventions on heritage. He is notable for his respect to historical additions, his preference for not isolating the monuments, his interest in building systems and his continuous desire to re-cover the traditional crafts that were completely lost in the nineteenth century in Spain. The main aim of this thesis is therefore the descriptive and architectural analysis of Lázaro’s projects and interventions developed and executed for the Cathedral of León. The thesis identifies the principles and ideas that guided his work in this temple and establish the criteria for intervention in the historical and artistic heritage architecture he applied after studying its various print publications, projects and restoration works undertaken in other buildings. Accordingly, the thesis is structured in three parts: the first part where it deals Lázaro’s architectural thinking in his interventions on heritage constructions; the second one, in which analyses the projects and interventions carried out by Lazaro in the “pulchra leonina”, but this analysis is preceded by the description of Lázaro’s relationship with the Cathedral of León before taking charge of its restoration in 1892; and the third and final section, in which the study of major restoration interventions implemented by Lázaro in other buildings of Spanish architectural heritage is made. This research has used available documentation (in written or graphic form, plans or photographs) scattered in a diverse range of archives de-pendent on various civil and ecclesiastical institutions. Moreover, we could access the conservation and restoration works, currently being carried out in areas where Lázaro intervened (stained glass windows, forged iron en-closures, gates, doors, masonry, covers, etc.). It has been possible to ex-change views and opinions with the person currently in charge of the referred restoration works which has facilitated and complemented the development of this thesis. It further, it has allowed contrasting and obtaining data directly from the monument under study. Consultation of various architectural journals published in those years has also been taken into account, as well as a diversity of books and articles which concerned the buildings assessed in this work, or related to them. Also, although not with the results expected, it has been obtained the testimony of some of Lázaro’s descendants as well as descendants of the workers who operated under him. As a general conclusion, the thesis defines the general criteria that guided his professional work in the heritage for the first time. Furthermore, Juan Bautista Lázaro’s projects and interventions in the Cathedral of León are analysed in detail. Also, it has been studying in detail the Lazaro’s work in the architectural heritage. To achieve this goal, the thesis has studied not only the information from the official projects and technical reports of them, but also it has been tried to verify if the information contained in the different documents of the same project and in the drafts were related and consistent with each other. In addition, it has been attempted to per-form a comparative analysis of the execution of Lázaro’s projects and the entire projected content. This comparative study had not been done to date and this will be, therefore, one of the main contributions of this re-search. Finally, this thesis opens up three lines of investigation (that have already been discussed and partially advanced, but which fall beyond the scope of this research). These refer to the study of the evolution of the graphical representation of the plans of Leon Cathedral catalogued in this thesis, public activity of Lazaro and his concern for the defence of heritage as deputy in Parliament, municipal architect of Avila, and as diocesan architect Ávila and Toledo, and even more how its restoration actions in architectural heritage influenced his projects of new construction.

Aplicación de la celulosa bacteriana a la restauración del patrimonio bibliográfico y documental en papel

La preservación del patrimonio bibliográfico y documental en papel es uno de los mayores retos a los que se enfrentan bibliotecas y archivos de todo el mundo. La búsqueda de soluciones al problema del papel degradado ha sido abordada históricamente desde dos líneas de trabajo predominantes: la conservación de estos documentos mediante la neutralización de los ácidos presentes en ellos con agentes alcalinos, y su restauración mediante el método de laminación fundamentalmente con papel de origen vegetal. Sin embargo, no se ha explorado con éxito la posibilidad de reforzar la celulosa dañada, y el problema sigue sin encontrar una solución satisfactoria. Hasta el día de hoy, el desarrollo de tratamientos basados en biotecnología en la conservación del patrimonio documental ha sido muy escaso, aunque la capacidad de ciertas bacterias de producir celulosa lleva a plantear su uso en el campo de la conservación y restauración del papel. La celulosa bacteriana (CB) es químicamente idéntica a la celulosa vegetal, pero su organización macroscópica es diferente. Sus propiedades únicas (alto grado de cristalinidad, durabilidad, resistencia y biocompatibilidad) han hecho de este material un excelente recurso en diferentes campos. En el desarrollo de esta tesis se ha estudiado el uso de la celulosa bacteriana, de alta calidad, generada por Gluconacetobacter sucrofermentans CECT 7291, para restaurar documentos deteriorados y consolidar los que puedan estar en peligro de degradación, evitando así su destrucción y proporcionando al papel que se restaura unas buenas propiedades mecánicas, ópticas y estructurales. Se desarrollan asimismo protocolos de trabajo que permitan la aplicación de dicha celulosa. En primer lugar se seleccionó el medio de cultivo que proporcionó una celulosa adecuada para su uso en restauración. Para ello se evaluó el efecto que tienen sobre la celulosa generada las fuentes de carbono y nitrógeno del medio de cultivo, manteniendo como parámetros fijos la temperatura y el pH inicial del medio, y efectuando los ensayos en condiciones estáticas. Se evaluó, también, el efecto que tiene en la CB la adición de un 1% de etanol al medio de cultivo. Las capas de celulosa se recolectaron a cuatro tiempos distintos, caracterizando en cada uno de ellos el medio de cultivo (pH y consumo de fuente de carbono), y las capas de CB (pH, peso seco y propiedades ópticas y mecánicas). La mejor combinación de fuentes de carbono y nitrógeno resultó ser fructosa más extracto de levadura y extracto de maíz, con o sin etanol, que proporcionaban una buena relación entre la producción de celulosa y el consumo de fuente de carbono, y que generaban una capa de celulosa resistente y homogénea. La adición de etanol al medio de cultivo, si bien aumentaba la productividad, causaba un descenso apreciable de pH. Las capas de CB obtenidas con los medios de cultivo optimizados se caracterizaron en términos de sus índices de desgarro y estallido, propiedades ópticas, microscopía electrónica de barrido (SEM), difracción de rayos-X, espectroscopía infrarroja con transformada de Fourier (FTIR), grado de polimerización, ángulos de contacto estáticos y dinámicos, y porosimetría de intrusión de mercurio. Por otro lado hay que tener en cuenta que el material restaurado debe ser estable con el tiempo. Por ello esta misma caracterización se efectuó tras someter a las capas de CB a un proceso de envejecimiento acelerado. Los resultados mostraron que la CB resultante tiene un elevado índice de cristalinidad, baja porosidad interna, buenas propiedades mecánicas, y alta estabilidad en el tiempo. Para desarrollar los protocolos de trabajo que permitan la restauración con esta celulosa optimizada, se comienzó con un proceso de selección de los papeles que van a ser restaurados. Se eligieron tres tipos de papeles modelo, hechos con pasta mecánica, química y filtro (antes y después de ser sometidos a un proceso de envejecimiento acelerado), y tres libros viejos adquiridos en el mercado de segunda mano. Estos ejemplares a restaurar se caracterizaron también en términos de sus propiedades mecánicas y fisicoquímicas. El primer protocolo de restauración con CB que se evaluó fue el denominado laminación. Consiste en aplicar un material de refuerzo al documento mediante el uso de un adhesivo. Se seleccionó para ello la CB producida en el medio de cultivo optimizado con un 1% de etanol. Se aplicó un método de purificación alcalino (1 hora a 90 °C en NaOH al 1%) y como adhesivo se seleccionó almidón de trigo. El proceso de laminación se efectuó también con papel japonés (PJ), un material habitualmente utilizado en conservación, para comparar ambos materiales. Se concluyó que no hay diferencias significativas en las características estudiadas entre los dos tipos de materiales de refuerzo. Se caracterizó el material reforzado y, también, después de sufrir un proceso de envejecimiento acelerado. Los papeles laminados con CB mostraban diferencias más marcadas en las propiedades ópticas que los restaurados con PJ, con respecto a los originales. Sin embargo, el texto era más legible cuando el material de restauración era la CB. La mojabilidad disminuía con ambos tipos de refuerzo, aunque en los papeles laminados con CB de manera más marcada e independiente del material a restaurar. Esto se debe a la estructura cerrada de la CB, que también conduce a una disminución en la permeabilidad al aire. Este estudio sugiere que la CB mejora la calidad del papel deteriorado, sin alterar la información que contiene, y que esta mejora se mantiene a lo largo del tiempo. Por tanto, la CB puede ser utilizada como material de refuerzo para laminar, pudiendo ser más adecuada que el PJ para ciertos tipos de papeles. El otro método de restauración que se estudió fue la generación in situ de la CB sobre el papel a restaurar. Para ello se seleccionó el medio de cultivo sin etanol, ya que el descenso de pH que causaba su presencia podría dañar el documento a restaurar. El método de purificación elegido fue un tratamiento térmico (24 horas a 65 °C), menos agresivo para el material a restaurar que el tratamiento alcalino. Se seleccionó la aplicación del medio de cultivo con la bacteria mediante pincel sobre el material a restaurar. Una vez caracterizado el material restaurado, y éste mismo tras sufrir un proceso de envejecimiento acelerado, se concluyó que no hay modificación apreciable en ninguna característica, salvo en la permeabilidad al aire, que disminuye de manera muy evidente con la generación de CB, dando lugar a un material prácticamente impermeable al aire. En general se puede concluir que ha quedado demostrada la capacidad que tiene la celulosa generada por la bacteria Gluconacetobacter sucrofermentans CECT 7291 para ser utilizada como material de refuerzo en la restauración del patrimonio documental en papel. Asimismo se han desarrollado dos métodos de aplicación, uno ex situ y otro in situ, para efectuar esta tarea de restauración. ABSTRACT The preservation of bibliographic and documentary heritage is one of the biggest challenges that libraries and archives around the world have to face. The search for solutions to the problem of degraded paper has historically been focused from two predominants lines of work: the conservation of these documents by the neutralization of acids in them with alkaline agents, and their restoration by lining them with, basically, cellulose from vegetal sources. However, the possibility of strengthening the damaged cellulose has not been successfully explored, and the problem still persists. Until today, the development of biotechnology-based treatments in documentary heritage conservation has been scarce, although the ability of certain bacteria to produce cellulose takes to propose its use in the field of conservation and restoration of paper. The bacterial cellulose (BC) is chemically identical to the plant cellulose, but its macroscopic organization is different. Its unique properties (high degree of crystallinity, durability, strength and biocompatibility), makes it an excellent resource in different fields. The use of high-quality BC generated by Gluconacetobacter sucrofermentans CECT 7291 to restore damaged documents and to consolidate those that may be at risk of degradation, has been studied in this thesis, trying to prevent the document destruction, and to get reinforced papers with good mechanical, optical and structural properties. Protocols that allow the implementation of the BC as a reinforcing material were also developed. First of all, in order to select the culture medium that provides a cellulose suitable for its use in restoration, it has been evaluated the effect that the carbon and nitrogen sources from the culture medium have on the generated BC, keeping the temperature and the initial pH of the medium as fixed parameters, and performing the culture without shaking. The effect of the addition of 1% ethanol to the culture medium on BC properties was also evaluated. The cellulose layers were collected at four different times, characterizing in all of them the culture medium (pH and carbon source consumption), and the BC sheets (pH, dry weight and optical and mechanical properties). The best combination of carbon and nitrogen sources proved to be fructose plus yeast extract and corn steep liquor, with or without ethanol, which provided a good balance between the cellulose production and the consumption of carbon source, and generating BC sheets homogeneous and resistant. The addition of ethanol to the culture medium increased productivity but caused a noticeable decrement in pH. The BC layers generated with these optimized culture media, have been characterized in terms of tear and burst index, optical properties, scanning electron microscopy (SEM), X-ray diffraction, infrared Fourier transform spectroscopy (FTIR), polymerization degree, static and dynamic contact angles, and mercury intrusion porosimetry. Moreover it must be kept in mind that the restored materials should be stable over time. Therefore, the same characterization was performed after subjecting the layers of BC to an accelerated aging process. The results showed that the BC sheets obtained have a high crystallinity index, low internal porosity, good mechanical properties, and high stability over time. To develop working protocols to use this optimized BC in paper restoration, the first step was to select the samples to restore. Three types of model papers, made from mechanical pulp, chemical pulp and filter paper (before and after an accelerated aging process), and three old books purchased in the second hand market, were chosen. These specimens to be restored were also characterized in terms of its mechanical and physicochemical properties. The first protocol of restoration with BC to be evaluated is called linning. It consists on applying a reinforcing material to the document using an adhesive. The BC produced in the optimized culture medium with 1% ethanol was selected. An alkali purification method (1 hour at 90 °C in 1% NaOH) was applied, and wheat starch was selected as adhesive. The linning process was also carried out with Japanese paper (JP), a material commonly used in conservation, in order to compare both materials. It was concluded that there are no significant differences in the characteristics studied of the two types of reinforcing materials. The reinforced materials were characterized before and after undergoing to an accelerated aging. Papers lined with BC showed more marked differences in the optical properties that papers restored with JP. However, the text was more readable when BC was the reinforcing material. Wettability decreased with both types of reinforcement, although in the papers linned with BC it happened more marked and independently of the sample to restore. This is due to the closed structure of BC, which also leads to a decrement in air permeance. This study suggests that BC improves the deteriorated paper quality, without altering the information on it, and that this improvement is maintained over time. Therefore, the BC may be used as reinforcing material for linning, being more suitable than the JP to restore certain types of papers. The other restoration method to be evaluated was the in situ generation of BC over the paper to restore. For this purpose the culture medium without ethanol was selected, as the pH decrement caused by his presence would damage the document to restore. As purification method a heat treatment (24 hours at 65 °C) was chosen, less aggressive to the material to restore than the alkaline treatment. It was decided to apply the culture medium with the bacteria onto the material to restore with a brush. The reinforced material was characterized before and after an accelerated aging process. It was concluded that there was no substantial change in any characteristic, except for air permeance, which decreases very sharply after the generation of BC, getting a substantially air impermeable material. In general, it can be concluded that the ability of BC produced by Gluconacetobacter sucrofermentans CECT 7291 for its use as a reinforcing material in the restoration of paper documentary heritage, has been demonstrated. Also, two restoration methods, one ex situ and another in situ have been developed.