Explanation of Big "P" as of March 20, 1959

ERROR is a routine to provide a common location for all routines. Its celling sequence is: SXD SERROR,4 TSX SERROR+1,4 The above is normally followed immediately by up to 20 registers of BCD remarks terminated by a word of 1's. This may be left out, however. ERROR prints out the remark, if any, the location of the TSX that entered error, restores the console except for the AC overflow, and transfers to the user's error routine specified by the calling sequence of SETUP.

Micro-layered-photolithography for Micro-Fabrication and Micro-Molding

A novel process based on the principle of layered photolithography has been proposed and tested for making real three-dimensional micro-structures. An experimental setup was designed and built for doing experiments on this micro-fabrication process. An ultraviolet (UV) excimer laser at the wavelength of 248 nm was used as the light source and a single piece of photo-mask carrying a series of two dimensional (2D) patterns sliced from a three dimensional (3D) micro-part was employed for the photolithography process. The experiments were conducted on the solidification of liquid photopolymer from single layer to multiple layers. The single-layer photolithography experiments showed that certain photopolymers could be applied for the 3D micro-fabrication, and solid layers with sharp shapes could be formed from the liquid polymer identified. By using a unique alignment technique, multiple layers of photolithography was successfully realized for a micro-gear with features at 60 microns. Electroforming was also conducted for converting the photopolymer master to a metal cavity of the micro-gear, which proved that the process is feasible for micro-molding.