Hot-pressing of electrolytic, dehydrided, and calcium-reduced thorium powders /

"Contract AT-30-1 GEN-366."

Evaluation of Horizons, Inc. Th metal powder : progress report no. 1 for February 18, 1954-March 4, 1954 /

Three samples of thorium powder as supplied by Horizons, Inc. of Cleveland, Ohio were compared. The powder was processed entirely without the use of protective atmospheres with the exception of the sintering which was performed in a tank argon atmosphere with a dew point of approximately -80°C and the hot-pressing which was carried out in vacuum. The equipment and procedures used for cold-pressing and sintering were identical to those used in the evaluation of Sylvania produced thorium powders. The hot-pressing was done with standard uranium hot-pressing equipment.

A continuous electrolytic process for the production of beryllium metal /

The continuous production of beryllium metal by low-temperature fused salt electrolysis into a continuously circulating mercury cathode has been demonstrated. The product is amenable to direct hot pressing or to powder preparation by distilling off the mercury. The production of pure beryllium chloride in good yield by direct chlorination of beryllium oxide has also been demonstrated.

Ceramic fuel elements made by hot isostatic pressing /

Work performed at the Sylvania-Corning Nuclear Corporation under contract AT-30-1 GEN-366 with the Division of Reactor Development.

Hot isostatic compaction of graphite /

"October 5, 1965."

Isostatic pressing of UO₂ in high temperature metals /

The hot isostatic pressing process has been applied at temperatures up to 1500°C for the fabrication of high temperature fuel rods composed of UO₂ clad in columbium and UO₂ in iron-aluminum type alloy. The fused UO₂ powder apparently becomes quite plastic at temperatures above 1200°C and can be isostatically compacted at 1500°C to 98% of its theoretical density. Columbian tubes particularly lend themselves to the fabrication of fuel rods by simultaneously compacting and cladding UO₂ powders in the tubes, but the cast iron-aluminum type alloy that was used was unsatisfactory because of its brittleness.