Characterization of soluble and bound EPS obtained from 2 submerged membrane bioreactors by 3D-EEM and HPSEC


Autoria(s): Domínguez Chabaliná, Liuba; Rodríguez Pastor, Manuel; Prats, Daniel
Contribuinte(s)

Universidad de Alicante. Departamento de Ingeniería Química

Universidad de Alicante. Instituto Universitario del Agua y de las Ciencias Ambientales

Recursos Hídricos y Desarrollo Sostenible

Data(s)

11/09/2014

11/09/2014

15/10/2013

Resumo

This research study deals with the quantification and characterization of the EPS obtained from two 25 L bench scale membrane bioreactors (MBRs) with micro-(MF-MBR) and ultrafiltration (UF-MBR) submerged membranes. Both reactors were fed with synthetic water and operated for 168 days without sludge extraction, increasing their mixed liquor suspended solid (MLSS) concentration during the experimentation time. The characterization of soluble EPS (EPSs) was achieved by the centrifugation of mixed liquor and bound EPS (EPSb) by extraction using a cationic resin exchange (CER). EPS characterization was carried out by applying the 3-dimensional excitation–emission matrix fluorescence spectroscopy (3D-EEM) and high-performance size exclusion chromatography (HPSEC) with the aim of obtaining structural and functional information thereof. With regard to the 3D-EEM analysis, fluorescence spectra of EPSb and EPSs showed 2 peaks in both MBRs at all the MLSS concentrations studied. The peaks obtained for EPSb were associated to soluble microbial by-product-like (predominantly protein-derived compounds) and to aromatic protein. For EPSs, the peaks were associated with humic and fulvic acids. In both MBRs, the fluorescence intensity (FI) of the peaks increased as MLSS and protein concentrations increased. The FI of the EPSs peaks was much lower than for EPSb. It was verified that the evolution of the FI clearly depends on the concentration of protein and humic acids for EPSb and EPSs, respectively. Chromatographic analysis showed that the intensity of the EPSb peak increased while the concentrations of MLSS did. Additionally, the mean MW calculated was always higher the higher the MLSS concentrations in the reactors. MW was higher for the MF-MBR than for the UF-MBR for the same MLSS concentrations demonstrating that the filtration carried out with a UF membrane lead to retentions of lower MW particles.

This study was partially financed by the Ministry of Education via the projects, “Water resources generation by means of membrane processes” (NF MBR/NF)CTQ200766780, “Treatment of superficial water and wastewater to obtain high quality effluents” (CTM2012-15348) and “Treatment and wastewater reuse for a sustainable management” (CONSOLIDER) (CSD200644), and by the Ministry of Environment via the project “Removal of organic micropollutants by MBR technology associated to nanofiltration” (124/SGTB/2007/3.1).

Identificador

Talanta. 2013, 115: 706-712. doi:10.1016/j.talanta.2013.05.062

0039-9140 (Print)

1873-3573 (Online)

http://hdl.handle.net/10045/40217

10.1016/j.talanta.2013.05.062

Idioma(s)

eng

Publicador

Elsevier

Relação

http://dx.doi.org/10.1016/j.talanta.2013.05.062

Direitos

info:eu-repo/semantics/restrictedAccess

Palavras-Chave #Extracellular polymeric substances #Fluorescence spectroscopy #Membrane bioreactor #Size exclusion chromatography #Ingeniería Química
Tipo

info:eu-repo/semantics/article