Grain-size distribution and frictional behaviour of sediment cores from the Nice Slope


Autoria(s): Stegmann, Sylvia; Kopf, Achim J
Cobertura

MEDIAN LATITUDE: 43.645088 * MEDIAN LONGITUDE: 7.218824 * SOUTH-BOUND LATITUDE: 43.641330 * WEST-BOUND LONGITUDE: 7.211000 * NORTH-BOUND LATITUDE: 43.648350 * EAST-BOUND LONGITUDE: 7.225680 * DATE/TIME START: 2009-06-27T09:15:22 * DATE/TIME END: 2012-04-05T10:56:00

Data(s)

17/07/2015

Resumo

The upper shelf of the landslide-prone Ligurian Margin (Western Mediterranean Sea) off Nice well-known for the 1979 Airport Landslide is a natural laboratory to study preconditioning factors and trigger mechanisms for submarine landslides. For this study low-stress ring shear experiments have been carried out on a variety of sediments from >50 gravity cores to characterise the velocity-dependent frictional behaviour. Mean values of the peak coefficient of friction vary from 0.46 for clay-dominated samples (53 % clay, 46 % silt, 1 %) sand up to 0.76 for coarse-grained sediments (26 % clay, 57 % silt, 17 % sand). The majority of the sediments tested show velocity strengthening regardless of the grain size distribution. For clayey sediments the peak and residual cohesive strength increases with increasing normal stress, with values from 1.3 to 10.6 kPa and up to 25 % of all strength supported by cohesive forces in the shallowmost samples. A pseudo-static slope stability analysis reveals that the different lithologies (even clay-rich material with clay content >=50 %) tested are stable up to slope angles <26° under quasi-drained conditions.

Formato

application/zip, 2 datasets

Identificador

https://doi.pangaea.de/10.1594/PANGAEA.848222

Idioma(s)

en

Publicador

PANGAEA

Direitos

Access constraints: access rights needed

Fonte

Supplement to: Stegmann, Sylvia; Kopf, Achim J (2014): How stable is the Nice slope? An analysis based on strength and cohesion from ring shear experiments. In: Krastel S et al. (eds.) Submarine Mass Movements and Their Consequences. Springer, Heidelberg, 189-200, doi:10.1007/978-3-319-00972-8_17

Palavras-Chave #<2 µm, >9 phi; >6 µm; µ; µpeak; 0,06 - 0,6, Rate-depending; 0,6 - 6,0, Rate-depending; 100, Coeff. of Peak Friction related to various normal stress states given in [kPa]; 100, Coeff. of Residual Friction related to various normal stress states given in [kPa]; 100, of residual strength; 100, Peak shear strength 0.06 mm/min; 100, related to various normal stress states; 100, Residual shear strength 0.06 mm/min; 125-63 µm; 198, Coeff. of Peak Friction related to various normal stress states given in [kPa]; 198, Coeff. of Residual Friction related to various normal stress states given in [kPa]; 198, of residual strength; 198, Peak shear strength 0.06 mm/min; 198, related to various normal stress states; 198, Residual shear strength 0.06 mm/min; 2000-630 µm gS; 2-1 mm; 250-125 µm; 27, Coeff. of Peak Friction related to various normal stress states given in [kPa]; 27, Coeff. of Residual Friction related to various normal stress states given in [kPa]; 27, of residual strength; 27, Peak shear strength 0.06 mm/min; 27, related to various normal stress states; 27, Residual shear strength 0.06 mm/min; 500-250 µm; 51, Coeff. of Peak Friction related to various normal stress states given in [kPa]; 51, Coeff. of Residual Friction related to various normal stress states given in [kPa]; 51, of residual strength; 51, Peak shear strength 0.06 mm/min; 51, related to various normal stress states; 51, Residual shear strength 0.06 mm/min; 6,0 - 0,03, Rate-depending; C; Center for Marine Environmental Sciences; Cohesion; Cohesive friction; Comment; DBD; Density, dry bulk; Depth; DEPTH, sediment/rock; Event; fine-grained sand fraction; Friction coefficient; Friction coh; Indicators for progressive deformation; Lithology; Lithology/composition/facies; Location; MARUM; overburden stress; Sand; Shear beh; Shear behaviour; Shear strength; SigmaV; Size fraction < 0.002 mm, > 9 phi, clay; Size fraction > 0.006 mm, silt; Size fraction 0.125-0.063 mm, 3.0-4.0 phi, very fine sand; Size fraction 0.250-0.125 mm, 2.0-3.0 phi, fine sand; Size fraction 0.500-0.250 mm, 1.0-2.0 phi, medium sand; Size fraction 2.000-0.630 mm, coarse sand; Size fraction 2.000-1.000 mm, (-1.0)-0.0 phi, very coarse sand; Vertical stress
Tipo

Dataset