Oxygen-isotope composition, temperature and depth of formation of chert at DSDP Leg 62 Holes


Autoria(s): Hein, James R; Yeh, Hsueh-Wen
Cobertura

MEDIAN LATITUDE: 33.574236 * MEDIAN LONGITUDE: 175.766232 * SOUTH-BOUND LATITUDE: 21.350200 * WEST-BOUND LONGITUDE: 173.888800 * NORTH-BOUND LATITUDE: 39.860700 * EAST-BOUND LONGITUDE: 179.255700 * DATE/TIME START: 1978-08-02T00:00:00 * DATE/TIME END: 1978-08-28T00:00:00

Data(s)

25/09/1981

Resumo

We measured oxygen-isotope compositions of 16 siliceous rocks from Deep Sea Drilling Project Sites 463, 464, 465, and 466 (Leg 62). Samples are from deposits that range in age from about 40 to 103 m.y. and that occur at sub-bottom depths of 9 to 461 meters. Mean d18O values range from 28.4 to 36.8 per mil and 36.0 ± 0.3 per mil for quartz-rich and opal-CTrich rocks, respectively. d18O values in chert decrease with increasing sub-bottom depth; the slope of the d18O/depth curve is less steep for Site 464 than for the other sites which indicates that chert at Site 464 formed at higher temperatures than chert at Sites 463, 465, and 466. Temperatures of formation of cherts were 7 to 42°C, using the silica-water fractionation factor of Knauth and Epstein (1976), or 19 to 56°C, using the equation of Clayton et al. (1972). Temperatures in the sediment where the cherts now occur are lower than their isotopically determined temperatures of formation, which means that the cherts record an earlier history when temperatures in the sediment section were greater. Estimated sediment temperatures when the cherts formed are comparable to, but generally slightly lower than, those calculated from Knauth and Epstein's equation. The isotopic composition of cherts is more closely related to environment of formation (diagenetic environment) or paleogeothermal gradients, than to paleoclimates (bottom-water temperatures). Opal-CT-rich rocks may better record paleo-bottom-water temperature. In Leg 62 cherts, better crystallinity of quartz corresponds to lower d18O values; this implies progressively higher temperatures of equilibration between quartz and water during maturation of quartz. The interrelationship of d18O and crystallinity is noted also in continental-margin deposits such as the Monterey Formation - but for higher temperatures. The apparent temperature difference between open-ocean and continental-margin deposits can be explained by the dominant control of temperature on silica transformation in the rapidly deposited continental-margin deposits, whereas time, as well as temperature, has a strong influence on the transformations in open-ocean deposits. Comparisons between the chemistry and d18O values of cherts reveal two apparent trends: both boron and SiO2 increase as d18O increases. However, the correspondence between SiO2 and d18O is only apparent, because the two cherts lowest in SiO2 are also the most deeply buried, so the trend actually reflects depth of burial. The correspondence between boron and d18O supports the conclusion that boron is incorporated in the quartz crystal structure during precipitation

Formato

application/zip, 2 datasets

Identificador

https://doi.pangaea.de/10.1594/PANGAEA.819722

doi:10.1594/PANGAEA.819722

Idioma(s)

en

Publicador

PANGAEA

Direitos

CC-BY: Creative Commons Attribution 3.0 Unported

Access constraints: unrestricted

Fonte

Supplement to: Hein, James R; Yeh, Hsueh-Wen (1981): Oxygen-isotope composition of chert from the Mid-Pacific Mountains and Hess Rise, Deep Sea Drilling Project Leg 62. In: Thiede, J; Vallier, TL; et al. (eds.), Initial Reports of the Deep Sea Drilling Project (U.S. Govt. Printing Office), 62, 749-758, doi:10.2973/dsdp.proc.62.130.1981

Palavras-Chave ## = In situ measurement; #1, 40 m.y. after deposition, using bottom paleotemperatures from Douglas and Savin (1973); #1, Based on geothermal gradients in fourth column and bottom-water temperatures of 1.5°C; #1, chert, SMOW; #1, Site 463 based on average of 8 nearby measurements from Jessop et al. (1976); Site 464 first value is average of 2 nearby measurements, second value is from shipboard measurements during Leg 62, as is the value for Site 465; the measured value at Site 465 is also used for Site 466. Original unit mcal/cm-sec-°C = 1/2.39 W/m*K; #2, 40 m.y. after deposition, using bottom paleotemperatures from Douglas and Savin (1973); #2, Based on geothermal gradients in fourth column and bottom-water temperatures of 1.5°C; #2, chert, SMOW; #2, Site 463 based on average of 8 nearby measurements from Jessop et al. (1976); Site 464 first value is average of 2 nearby measurements, second value is from shipboard measurements during Leg 62, as is the value for Site 465; the measured value at Site 465 is also used for Site 466. Original unit mcal/cm-sec-°C = 1/2.39 W/m*K; #3, chert, SMOW; 62-463; 62-464; 62-465; 62-465A; 62-466; Age; AGE; Calculated; Calculated from stable oxygen isotopes; Chert, SMOW; Conductivity, thermal; d18O; d18O std dev; Deep Sea Drilling Project; delta 18O; delta 18O, standard deviation; Depth; DEPTH, sediment/rock; DRILL; Drilling/drill rig; DSDP; Event; Glomar Challenger; Heat Flow; HF; ID; Identification; k; Leg62; Lithology; Lithology/composition/facies; Major; Mass spectrometry; Mean, chert, SMOW; Min assembl; Mineral assemblage; Minor; Moderate; North Pacific/CONT RISE; North Pacific/SEAMOUNT; ODP sample designation; Sample code/label; see reference(s); Site 463 based on average of 7 nearby heat-flow stations; Site 464 on 1 nearby station from Jessop et al. (1976); Site 465 calculated from a geothermal gradient measured in situ; the Site 465 value is also used for Site 466; t; T1, Calculated from Clayton et al. (1972); T2, Calculated from Knauth and Epstein (1975); T cal; Temperature, calculated; Temperature, in rock/sediment; Temperature gradient; T grad; Trace
Tipo

Dataset