Effect of Na-chloride on the bioleaching of a chalcopyrite concentrate in shake flasks and stirred tank bioreactors


Autoria(s): Bevilaqua, Denise; Lahti, Heidi; Suegama, Patrícia H.; Garcia Júnior, Oswaldo[UNESP]; Benedetti, Assis Vicente; Puhakka, Jaakko A.; Tuovinen, Olli H.
Contribuinte(s)

Universidade Estadual Paulista (UNESP)

Data(s)

27/05/2014

27/05/2014

18/07/2013

Resumo

Oxidative dissolution of chalcopyrite at ambient temperatures is generally slow and subject to passivation, posing a major challenge for developing bioleaching applications for this recalcitrant mineral. Chloride is known to enhance the chemical leaching of chalcopyrite, but much of this effect has been demonstrated at elevated temperatures. This study was undertaken to test whether 100-200 mM Na-chloride enhances the chemical and bacterial leaching of chalcopyrite in shake flasks and stirred tank bioreactor conditions at mesophilic temperatures. Acidithiobacillus ferrooxidans, Acidithiobacillus thiooxidans and abiotic controls were employed for the leaching experiments. Addition of Na-chloride to the bioleaching suspension inhibited the formation of secondary phases from chalcopyrite and decreased the Fe(III) precipitation. Neither elemental S nor secondary Cu-sulfides were detected in solid residues by X-ray diffraction. Chalcopyrite leaching was enhanced when the solution contained bacteria, ferrous iron and Na-chloride under low redox potential (< 450 mV) conditions. Scanning electron micrographs and energy-dispersive analysis of X-rays revealed the presence of precipitates that were identified as brushite and jarosites in solid residues. Minor amounts of gypsum may also have been present. Electrochemical analysis of solid residues was in concurrence of the differential effects between chemical controls, chloride ions, and bacteria. Electrochemical impedance spectroscopy was used to characterize interfacial changes on chalcopyrite surface caused by different bioleaching conditions. In abiotic controls, the impedance signal stabilized after 28 days, indicating the lack of changes on mineral surface thereafter, but with more resistive behavior than chalcopyrite itself. For bioleached samples, the signal suggested some capacitive response with time owing to the formation of less conductive precipitates. At Bode-phase angle plots (middle frequency), a new time constant was observed that was associated with the formation of jarosite, possibly also with minor amount or elemental S, although this intermediate could not be verified by XRD. Real impedance vs. frequency plots indicated that the bioleaching continued to modify the chalcopyrite/solution interface even after 42 days. © 2013 The Authors.

Formato

1-13

Identificador

http://dx.doi.org/10.1016/j.hydromet.2013.06.008

Hydrometallurgy, v. 138, p. 1-13.

0304-386X

http://hdl.handle.net/11449/75999

10.1016/j.hydromet.2013.06.008

WOS:000324013800001

2-s2.0-84880108362

2-s2.0-84880108362.pdf

Idioma(s)

eng

Relação

Hydrometallurgy

Direitos

openAccess

Palavras-Chave #Acidithiobacillus #Bioleaching #Chalcopyrite #Chloride #Electrochemical analysis #Acidithiobacillus ferrooxidans #Acidithiobacillus thiooxidans #Energy dispersive analysis #Scanning electron micrographs #Bacteria #Bottles #Concurrency control #Electrochemical impedance spectroscopy #Electrochemistry #Redox reactions #Scanning electron microscopy #X ray diffraction #Chlorine compounds
Tipo

info:eu-repo/semantics/article