Tension-tension fatigue failure behaviour of poly(phenylene ether ketone) (PEK-C)


Autoria(s): Zhou J; DAmore A; Zhuang GQ; He TB; Li BY; Nicolais L
Data(s)

1996

Resumo

Tension-tension fatigue tests were conducted on unnotched injection moulded poly(phenylene ether ketone) (PEK-C) specimens with two stress ratios, R. The fatigue behaviour of this material is described. The S-N curves (S = alternating stress, N = number of cycles to failure) for different R values have the same general shape, but the curve for bigger R is shifted to long cycles. A fatigue lifetime inversion is observed from constructed S-N curves. Examinations of failure surfaces and analyses of the fatigue data reveal that the fatigue failure mechanism of the material studied is crack growth dominated. But the manner of the fatigue crack initiation and propagation depends on the maximum cyclic stress applied. At higher stresses, the fatigue crack originates at the corner of the specimen and propagates inward; at lower stresses, the fatigue crack nucleates at an internal flaw of the specimen and propagates outward. The fatigue lifetime inversion corresponds to the transition of crack initiation and propagation from one mode to the other. Copyright (C) 1996 Elsevier Science Ltd.

Identificador

http://ir.ciac.jl.cn/handle/322003/25433

http://www.irgrid.ac.cn/handle/1471x/157444

Idioma(s)

英语

Fonte

Zhou J;DAmore A;Zhuang GQ;He TB;Li BY;Nicolais L.Tension-tension fatigue failure behaviour of poly(phenylene ether ketone) (PEK-C),POLYMER,1996,37(11):2103-2111

Palavras-Chave #FRACTURE-BEHAVIOR #BPA POLYCARBONATE #POLYMERS #PEEK
Tipo

期刊论文