Influences of initial buffer layer deposition on electrical and optical properties in cubic GaN grown on GaAs(100) by metalorganic chemical vapor deposition


Autoria(s): Xu DP; Yang H; Li JB; Li SF; Zhao DG; Wang YT; Sun XL; Wu RH
Data(s)

2000

Resumo

We present some results on the effect of initial buffer layer on the crystalline quality of Cubic GaN epitaxial layers grown on GaAs(100) substrates by metalorganic chemical vapor deposition. Photoluminescence and Hall measurements were performed to characterize the electrical and optical properties of cubic GaN. The crystalline quality subsequently grown high-temperature (HT) cubic GaN layers strongly depended on thermal effects during the temperature ramping process after low temperature (LT) growth of the buffer layers. Atomic force microscope (AFM) and reflection high-energy electron diffraction (RHEED) were employed to investigate this temperature ramping process. Furthermore, the role of thermal treatment during the temperature ramping process was identified. Using the optimum buffer layer, the full width at half maxim (FWHM) at room temperature photoluminescence 5.6 nm was achieved. To our knowledge, this is the best FWHM value for cubic GaN to date. The background carrier concentration was as low as 3 x 10(13) cm(-3). (C) 2000 Published by Elsevier Science S.A. All rights reserved.

We present some results on the effect of initial buffer layer on the crystalline quality of Cubic GaN epitaxial layers grown on GaAs(100) substrates by metalorganic chemical vapor deposition. Photoluminescence and Hall measurements were performed to characterize the electrical and optical properties of cubic GaN. The crystalline quality subsequently grown high-temperature (HT) cubic GaN layers strongly depended on thermal effects during the temperature ramping process after low temperature (LT) growth of the buffer layers. Atomic force microscope (AFM) and reflection high-energy electron diffraction (RHEED) were employed to investigate this temperature ramping process. Furthermore, the role of thermal treatment during the temperature ramping process was identified. Using the optimum buffer layer, the full width at half maxim (FWHM) at room temperature photoluminescence 5.6 nm was achieved. To our knowledge, this is the best FWHM value for cubic GaN to date. The background carrier concentration was as low as 3 x 10(13) cm(-3). (C) 2000 Published by Elsevier Science S.A. All rights reserved.

于2010-11-15批量导入

zhangdi于2010-11-15 17:02:24导入数据到SEMI-IR的IR

Made available in DSpace on 2010-11-15T09:02:24Z (GMT). No. of bitstreams: 1 2951.pdf: 198965 bytes, checksum: ba0ff3b8a6bbdba17327857d8d49b0f8 (MD5) Previous issue date: 2000

Chinese Vacuum Soc, Thin Films Comm.; Chinese Electr Soc, Thin Films Comm.; Nat Sci Fdn.

Chinese Acad Sci, Natl Res Ctr Optoelect Technol, Inst Semicond, Beijing 100864, Peoples R China

Chinese Vacuum Soc, Thin Films Comm.; Chinese Electr Soc, Thin Films Comm.; Nat Sci Fdn.

Identificador

http://ir.semi.ac.cn/handle/172111/14981

http://www.irgrid.ac.cn/handle/1471x/105208

Idioma(s)

英语

Publicador

ELSEVIER SCIENCE SA

PO BOX 564, 1001 LAUSANNE, SWITZERLAND

Fonte

Xu DP; Yang H; Li JB; Li SF; Zhao DG; Wang YT; Sun XL; Wu RH .Influences of initial buffer layer deposition on electrical and optical properties in cubic GaN grown on GaAs(100) by metalorganic chemical vapor deposition .见:ELSEVIER SCIENCE SA .THIN SOLID FILMS, 368 (2),PO BOX 564, 1001 LAUSANNE, SWITZERLAND ,2000,279-282

Palavras-Chave #光电子学 #cubic GaN #buffer layer #atomic force microscopy #reflection high-energy electron diffraction #MOVPE
Tipo

会议论文