A 1.1GHz LC VCO with Automatic Amplitude Control for Tuner Applications

This paper presents an LC VCO with auto-amplitude control （AAC）, in which pMOS FETs are used,and the varactors are directly connected to ground to widen the linear range of Kvco. The AAC circuitry adds little noise to the VCO but provides it with robust performance over a wide temperature and carrier frequency range.The VCO is fabricated in a chartered 50GHz 0.35μm SiGe BiCMOS process. The measurements show that it has - 127. 27dBc/Hz phase noise at 1MHz offset and a linear gain of 32.4MHz/V between 990MHz and 1.14GHz.The whole circuit draws 6. 6mA current from 5V supply.

This paper presents an LC VCO with auto-amplitude control （AAC）, in which pMOS FETs are used,and the varactors are directly connected to ground to widen the linear range of Kvco. The AAC circuitry adds little noise to the VCO but provides it with robust performance over a wide temperature and carrier frequency range.The VCO is fabricated in a chartered 50GHz 0.35μm SiGe BiCMOS process. The measurements show that it has - 127. 27dBc/Hz phase noise at 1MHz offset and a linear gain of 32.4MHz/V between 990MHz and 1.14GHz.The whole circuit draws 6. 6mA current from 5V supply.

于2010-11-23批量导入

zhangdi于2010-11-23 13:02:40导入数据到SEMI-IR的IR

Made available in DSpace on 2010-11-23T05:02:40Z (GMT). No. of bitstreams: 1 4190.pdf: 534459 bytes, checksum: 08b44f6863cef80a16bc44ddad936a4d (MD5) Previous issue date: 2006

国家自然科学基金资助项目

Mixed Signal and High Speed Circuit Laboratory, Institute of Semiconductors, Chinese Academy of Science;Department of Electrical Computer Engineering, Auburn University

国家自然科学基金资助项目