Substrate temperature dependence of ZnTe epilayers grown on GaAs(001) by molecular beam epitaxy

ZnTe thin films have been grown on GaAs(0 0 1) substrates at different temperatures with constant Zn and Te beam equivalent pressures (BEPs) by molecular beam epitaxy (MBE). In situ reflection high-energy electron diffraction (RHEED) observation indicates that two-dimensional (2D) growth mode can be established after around one-minute three-dimensional (3D) nucleation by increasing the substrate temperature to 340 degrees C. We found that Zn desorption from the ZnTe surface is much greater than that of Te at higher temperatures, and estimated the Zn sticking coefficient by the evolution of growth rate. The Zn sticking coefficient decreases from 0.93 to 0.58 as the temperature is elevated from 320 to 400 degrees C. The ZnTe epilayer grown at 360 degrees C displays the narrowest full-width at half-maximum (FWHM) of 660 arcsec from (0 0 4) reflection in double-crystal X-ray rocking curve (DCXRC) measurements. The surface morphology of ZnTe epilayers is strongly dependent on the substrate temperature, and the root-mean-square (RMS) roughness diminishes drastically with the increase in temperature.

Submitted by 阎军 (yanj@red.semi.ac.cn) on 2010-06-04T14:16:46Z No. of bitstreams: 1 Substrate temperature dependence of ZnTe epilayers grown on GaAs(001) by molecular beam epitaxy.pdf: 539506 bytes, checksum: 8ce95217050f95d51e8966edc0fdb0cb (MD5)

Approved for entry into archive by 阎军(yanj@red.semi.ac.cn) on 2010-06-04T14:36:43Z (GMT) No. of bitstreams: 1 Substrate temperature dependence of ZnTe epilayers grown on GaAs(001) by molecular beam epitaxy.pdf: 539506 bytes, checksum: 8ce95217050f95d51e8966edc0fdb0cb (MD5)

Made available in DSpace on 2010-06-04T14:36:43Z (GMT). No. of bitstreams: 1 Substrate temperature dependence of ZnTe epilayers grown on GaAs(001) by molecular beam epitaxy.pdf: 539506 bytes, checksum: 8ce95217050f95d51e8966edc0fdb0cb (MD5) Previous issue date: 2010

其它