Virtual sensing technology applied to a swarm of autonomous robots.

This thesis proposes a novel technology in the field of swarm robotics that allows a swarm of robots to sense a virtual environment through virtual sensors. Virtual sensing is a desirable and helpful technology in swarm robotics research activity, because it allows the researchers to efficiently and quickly perform experiments otherwise more expensive and time consuming, or even impossible. In particular, we envision two useful applications for virtual sensing technology. On the one hand, it is possible to prototype and foresee the effects of a new sensor on a robot swarm, before producing it. On the other hand, thanks to this technology it is possible to study the behaviour of robots operating in environments that are not easily reproducible inside a lab for safety reasons or just because physically infeasible. The use of virtual sensing technology for sensor prototyping aims to foresee the behaviour of the swarm enhanced with new or more powerful sensors, without producing the hardware. Sensor prototyping can be used to tune a new sensor or perform performance comparison tests between alternative types of sensors. This kind of prototyping experiments can be performed through the presented tool, that allows to rapidly develop and test software virtual sensors of different typologies and quality, emulating the behaviour of several hardware real sensors. By investigating on which sensors is better to invest, a researcher can minimize the sensors’ production cost while achieving a given swarm performance. Through augmented reality, it is possible to test the performance of the swarm in a desired virtual environment that cannot be set into the lab for physical, logistic or economical reasons. The virtual environment is sensed by the robots through properly designed virtual sensors. Virtual sensing technology allows a researcher to quickly carry out real robots experiment in challenging scenarios without all the required hardware and environment.

Low-cost flight control system for a small autonomous helicopter

In this paper we describe a low-cost flight control system for a small (60 class) helicopter which is part of a larger project to develop an autonomous flying vehicle. Our approach differs from that of others in not using an expensive inertial/GPS sensing system. The primary sensors for vehicle stabilization are a low-cost inertial sensor and a pair of CMOS cameras. We describe the architecture of our flight control system, the inertial and visual sensing subsystems and present some flight control results.

The Sensing Enterprise: Towards the Next Generation Dynamic Virtual Organisations

Part 6: Engineering and Implementation of Collaborative Networks

Ocean Virtual Laboratory: A new way to explore multi-sensor synergy demonstrated over the Agulhas region

Ocean Virtual Laboratory is an ESA-funded project to prototype the concept of a single point of access for all satellite remote-sensing data with ancillary model output and in situ measurements for a given region. The idea is to provide easy access for the non-specialist to both data and state-of-the-art processing techniques and enable their easy analysis and display. The project, led by OceanDataLab, is being trialled in the region of the Agulhas Current, as it contains signals of strong contrast (due to very energetic upper ocean dynamics) and special SAR data acquisitions have been recorded there. The project also encourages the take up of Earth Observation data by developing training material to help those not in large scientific or governmental organizations make the best use of what data are available. The website for access is: http://ovl-project.oceandatalab.com/

Rotating Brains / Beating Heart:International collaborative performance with Stelarc, the virtual reality ensemble Avatar Orchestra Metaverse, Pauline Oliveros, Martin Parker and saxophonist Franziska Schroeder.

The work ROTATING BRAINS / BEATING HEART was specifically developed for the opening performance of the 2010 DRHA conference. The conference’s theme ‘Sensual Technologies: Collaborative Practices of Interdisciplinarity explored collaborative relationships between the body and sensual/sensing technologies across various disciplines, looking to new approaches offered by various emerging fields and practices that incorporate new and existing technologies. The conference had a specific focus on SecondLife with roundtable events and discussions, led by performance artist Stelarc, as well as international participation via SecondLife.
The collaboration between Stelarc, the Avatar Orchestra Metaverse (AOM) and myself as the DRHA2010 conference program chair was a unique occurrence for this conference.

A Methodological Approach to User Evaluation and Assessment of a Virtual Environment Hangout

Innovation in virtual reality and motion sensing devices is pushing the development of virtual communication platforms towards completely immersive scenarios, which require full user interaction and create complex sensory experiences. This evolution influences user experiences and creates new paradigms for interaction, leading to an increased importance of user evaluation and assessment on new systems interfaces and usability, to validate platform design and development from the users’ point of view. The REVERIE research project aims to develop a virtual environment service for realistic inter-personal interaction. This paper describes the design challenges faced during the development process of user interfaces and the adopted methodological approach to user evaluation and assessment.

Mobile phone sensing systems : a survey

Mobile phone sensing is an emerging area of interest for researchers as smart phones are becoming the core communication device in people's everyday lives. Sensor enabled mobile phones or smart phones are hovering to be at the center of a next revolution in social networks, green applications, global environmental monitoring, personal and community healthcare, sensor augmented gaming, virtual reality and smart transportation systems. More and more organizations and people are discovering how mobile phones can be used for social impact, including how to use mobile technology for environmental protection, sensing, and to leverage just-in-time information to make our movements and actions more environmentally friendly. In this paper we have described comprehensively all those systems which are using smart phones and mobile phone sensors for humans good will and better human phone interaction.

Training courses for teachers through the distance learning: practice reports used virtual environment TELEDUC

This paper describes the experiences of long-distance courses, it focused on the continuing education of basic education teachers in all Brazilian territory. Such courses were offered by CECEMCA (Center for Continuing Education in Mathematics Education, Science and Environment), linked to the Universidade Estadual Paulista Julio de Mesquita Filho - Campus de Rio Claro during 15/01/2009 to 30/11/2009. The subjects report to the theme of Education, Geography and Environment, it was organized in four courses: "Introduction to Cartography," Environment and climate change - thinking a new paradigm of sustainable green planet "," Remote Sensing in environmental studies Environment "and" Methodological Alternatives for Inclusive Classroom: Experimenting with visual and hearing impairments". So, we show here, the feasibility and importance of distance learning tools for education, specifically teacher training, based on the results obtained in these courses.

Generating virtual images from oblique frames

Image acquisition systems based on multi-head arrangement of digital camerasare attractive alternatives enabling a larger imaging area when compared to a single framecamera. The calibration of this kind of system can be performed in several steps or byusing simultaneous bundle adjustment with relative orientation stability constraints. Thepaper will address the details of the steps of the proposed approach for system calibration,image rectification, registration and fusion. Experiments with terrestrial and aerial imagesacquired with two Fuji FinePix S3Pro cameras were performed. The experiments focusedon the assessment of the results of self-calibrating bundle adjustment with and withoutrelative orientation constraints and the effects to the registration and fusion when generatingvirtual images. The experiments have shown that the images can be accurately rectified andregistered with the proposed approach, achieving residuals smaller than one pixel. © 2013 by the authors; licensee MDPI, Basel, Switzerland.

Virtual Cilicia Project. How to use Google Earth as a visualization environment in an archaeological context

Over the past few years, archaeology has experienced a rapid development in geophysical prospection and remote sensing techniques. At the same time, the focus of archaeological research has shifted to landscape evelopment and human interaction. To impart the results, new methods and techniques are necessary. Virtual globes such as Google Earth offer fascinating methods of giving interested amateurs the possibility to interactively explore ancient cities and landscapes. Thanks to the increasing usage of GIS in cultural heritage, the implementation of interactive three dimensional learning opportunities becomes less and less tedious, but the non-linear narrative story telling medium demands for a special adaption of the content. This paper summarizes the experience gained during the realization of the “Virtual Cilicia Project” and outlines the future potential of virtual globes in the field of cultural heritage.

Análisis genómico y funcional de los sistemas de Quorum Sensing en Rhizobium leguminosarum

Rhizobium leguminosarum (Rl) es una alfa-proteobacteria capaz de establecer una simbiosis diazotrófica con distintas leguminosas. A pesar de la importancia de esta simbiosis en el balance global del ciclo del nitrógeno, muy pocos genomas de rhizobios han sido secuenciados, que aporten nuevos conocimientos relacionados con las características genéticas que contribuyen a importantes procesos simbióticos. Únicamente tres secuencias completas de Rl han sido publicadas: Rl bv. viciae 3841 y dos genomas de Rl bv. trifolii (WSM1325 y WSM2304), ambos simbiontes de trébol. La secuencia genómica de Rlv UPM791 se ha determinado por medio de secuenciación 454. Este genoma tiene un tamaño aproximado de 7.8 Mb, organizado en un cromosoma y 5 replicones extracromosómicos, que incluyen un plásmido simbiótico de 405 kb. Este nuevo genoma se ha analizado en relación a las funciones simbióticas y adaptativas en comparación con los genomas completos de Rlv 3841 y Rl bv. trifolii WSM1325 y WSM2304. Mientras que los plásmidos pUPM791a y b se encuentran conservados, el plásmido simbiótico pUPM791c exhibe un grado de conservación muy bajo comparado con aquellos descritos en las otras cepas de Rl. Uno de los factores implicados en el establecimiento de la simbiosis es el sistema de comunicación intercelular conocido como Quorum Sensing (QS). El análisis del genoma de Rlv UPM791 ha permitido la identificación de dos sistemas tipo LuxRI mediados por señales de tipo N-acyl-homoserina lactonas (AHLs). El análisis mediante HPLC-MS ha permitido asociar las señales C6-HSL, C7-HSL y C8-HSL al sistema rhiRI, codificado en el plásmido simbiótico; mientras que el sistema cinRI, localizado en el cromosoma, produce 3OH-C14:1-HSL. Se ha identificado una tercera sintasa (TraI) codificada en el plásmido simbiótico, pero su regulador correspondiente se encuentra truncado debido a un salto de fase. Adicionalmente, se han encontrado tres reguladores de tipo LuxR-orphan que no presentan una sintasa LuxI asociada. El efecto potencial de las señales tipo AHL se ha estudiado mediante una estrategia de quorum quenching, la cual interfiere con los sistemas de QS de la bacteria. Esta estrategia está basada en la introducción del gen aiiA de Bacillus subtilis, que expresa constitutivamente una enzima lactonasa degradadora de AHLs. Para llevar a cabo el análisis en condiciones simbióticas, se ha desarrollado un sistema de doble marcaje que permite la identificación basado en los marcadores gusA y celB, que codifican para una enzima β–glucuronidasa y una β–galactosidasa termoestable, respectivamente. Los resultados obtenidos indican que Rlv UPM791 predomina sobre la cepa Rlv 3841 para la formación de nódulos en plantas de guisante. La baja estabilidad del plásmido que codifica para aiiA, no ha permitido obtener una conclusión definitiva sobre el efecto de la lactonasa AiiA en competitividad. Con el fin de analizar el significado y la regulación de la producción de moléculas señal tipo AHL, se han generado mutantes defectivos en cada uno de los dos sistemas de QS. Se ha llevado a cabo un análisis detallado sobre la producción de AHLs, formación de biofilm y simbiosis con plantas de guisante, veza y lenteja. El efecto de las deleciones de los genes rhiI y rhiR en Rlv UPM791 es más drástico en ausencia del plásmido pUPM791d. Mutaciones en cinI o cinRIS muestran tanto ausencia de señales, como producción exclusivamente de las de bajo peso molecular, respectivamente, producidas por el sistema rhiRI. Estas mutaciones mostraron un efecto importante en simbiosis. El sistema rhiRI se necesita para un comportamiento simbiótico normal. Además, mutantes cinRIS generaron nódulos blancos e ineficientes, mientras que el mutante cinI fue incapaz de producir nódulos en ninguna de las leguminosas utilizadas. Dicha mutación resultó en la inestabilización del plasmido simbiótico por un mecanismo dependiente de cinI que no ha sido aclarado. En general, los resultados obtenidos indican la existencia de un modelo de regulación dependiente de QS significativamente distinto a los que se han descrito previamente en otras cepas de R. leguminosarum, en las cuales no se había observado ningún fenotipo relevante en simbiosis. La regulación de la producción de AHLs Rlv UPM791 es un proceso complejo que implica genes situados en los plásmidos UPM791c y UPM791d, además de la señal 3-OH-C14:1-HSL. Finalmente, se ha identificado un transportador de tipo RND, homologo a mexAB-oprM de P. aeruginosa e implicado en la extrusión de AHLs de cadena larga. La mutación he dicho transportador no tuvo efectos apreciables sobre la simbiosis. ABSTRACT Rhizobium leguminosarum (Rl) is a soil alpha-proteobacterium that establishes a diazotrophic symbiosis with different legumes. Despite the importance of this symbiosis to the global nitrogen cycling balance, very few rhizobial genomes have been sequenced so far which provide new insights into the genetic features contributing to symbiotically relevant processes. Only three complete sequences of Rl strains have been published: Rl bv. viciae 3841, harboring six plasmids (7.75 Mb) and two Rl bv. trifolii (WSM1325 and WSM2304), both clover symbionts, harboring 5 and 4 plasmids, respectively (7.41 and 6.87 Mb). The genomic sequence of Rlv UPM791 was undertaken by means of 454 sequencing. Illumina and Sanger reads were used to improve the assembly, leading to 17 final contigs. This genome has an estimated size of 7.8 Mb organized in one chromosome and five extrachromosomal replicons, including a 405 kb symbiotic plasmid. Four of these plasmids are already closed, whereas there are still gaps in the smallest one (pUPM791d) due to the presence of insertion elements and repeated sequences, which difficult the assembly. The annotation has been carried out thanks to the Manatee pipeline. This new genome has been analyzed as regarding symbiotic and adaptive functions in comparison to the Rlv 3841 complete genome, and to those from Rl bv. trifolii strains WSM1325 and WSM2304. While plasmids pUPM791a and b are conserved, the symbiotic plasmid pUPM791c exhibited the lowest degree of conservation as compared to those from the other Rl strains. One of the factors involved in the symbiotic process is the intercellular communication system known as Quorum Sensing (QS). This mechanism allows bacteria to carry out diverse biological processes in a coordinate way through the production and detection of extracellular signals that regulate the transcription of different target genes. Analysis of the Rlv UPM791 genome allowed the identification of two LuxRI-like systems mediated by N-acyl-homoserine lactones (AHLs). HPLC-MS analysis allowed the adscription of C6-HSL, C7-HSL and C8-HSL signals to the rhiRI system, encoded in the symbiotic plasmid, whereas the cinRI system, located in the chromosome, produces 3OH-C14:1-HSL, previously described as “bacteriocin small”. A third synthase (TraI) is encoded also in the symbiotic plasmid, but its cognate regulator TraR is not functional due to a fameshift mutation. Three additional LuxR orphans were also found which no associated LuxI-type synthase. The potential effect of AHLs has been studied by means of a quorum quenching approach to interfere with the QS systems of the bacteria. This approach is based upon the introduction into the strains Rl UPM791 and Rl 3841 of the Bacillus subtilis gene aiiA expressing constitutively an AHL-degrading lactonase enzyme which led to virtual absence of AHL even when AiiA-expressing cells were a fraction of the total population. No significant effect of AiiA-mediated AHL removal on competitiveness for growth in solid surface was observed. For analysis under symbiotic conditions we have set up a two-label system to identify nodules produced by two different strains in pea roots, based on the markers gusA and celB, encoding a β–glucuronidase and a thermostable β–galactosidase enzymes, respectively. The results obtained show that Rlv UPM791 outcompetes Rlv 3841 for nodule formation in pea plants, and that the presence of the AiiA plasmid does not significantly affect the relative competitiveness of the two Rlv strains. However, the low stability of the pME6863 plasmid, encoding aiiA, did not lead to a clear conclusion about the AiiA lactonase effect on competitiveness. In order to further analyze the significance and regulation of the production of AHL signal molecules, mutants deficient in each of the two QS systems were constructed. A detailed analysis of the effect of these mutations on AHL production, biofilm formation and symbiosis with pea, vetch and lentil plants has been carried out. The effect of deletions on Rlv UPM791 rhiI and rhiR genes is more pronounced in the absence of plasmid pUPM791d, as no signal is detected in UPM791.1, lacking this plasmid. Mutations in cinI or cinRIS show either no signals, or only the small ones produced by the rhiRI system, suggesting that cinR might be regulating the rhiRI system. These mutations had a strong effect on symbiosis. Analysis of rhi mutants revealed that rhiRI system is required for normal symbiotic performance, as a drastic reduction of symbiotic fitness is observed when rhiI is deleted, and rhiR is essential for nitrogen fixation in the absence of plasmid pUPM791d. Furthermore, cinRIS mutants resulted in white and inefficient nodules, whereas cinI mutant was unable to form nodules on any legume tested. The latter mutation is associated to the instabilization of the symbiotic plasmid through a mechanism still uncovered. Overall, the results obtained indicate the existence of a model of QS-dependent regulation significantly different to that previously described in other R. leguminosarum strains, where no relevant symbiotic phenotype had been observed. The regulation of AHL production in Rlv UPM791 is a complex process involving the symbiotic plasmid (pUPM791c) and the smallest plasmid (pUPM791d), with a key role for the 3-OH-C14:1-HSL signal. Finally, we made a search for potential AHL transporters in Rlv UPM791 genome. These signals diffuse freely across membranes, but in the case of the long-chain AHLs an active efflux system might be required, as it has been described for C12-HSL in the case of Pseudomonas aeruginosa. We have identified a putative AHL transporter of the RND family homologous to P. aeruginosa mexAB-oprM. A mutant strain deficient in this transporter has been generated, and TLC analysis shows absence of 3OH-C14:1-HSL in its supernatant. This deficiency was complemented by the reintroduction of an intact copy of the genes via plasmid transfer. The mutation in mexAB genes had no significant effects on the symbiotic performance of R. leguminosarum bv. viciae.

A sensorless virtual slave control scheme for kinematically dissimilar master-slave teleoperation

The use of telerobotic systems is essential for remote handling (RH) operations in radioactive areas of scientific facilities that generate high doses of radiation. Recent developments in remote handling technology has seen a great deal of effort being directed towards the design of modular remote handling control rooms equipped with a standard master arm which will be used to separately control a range of different slave devices. This application thus requires a kinematically dissimilar master-slave control scheme. In order to avoid drag and other effects such as friction or other non-linear and unmodelled slave arm effects of the common position-position architecture in nonbackdrivable slaves, this research has implemented a force-position control scheme. End-effector force is derived from motor torque values which, to avoid the use of radiation intolerant and costly sensing devices, are inferred from motor current measurement. This has been demonstrated on a 1-DOF test-rig with a permanent magnet synchronous motor teleoperated by a Sensable Phantom Omni® haptic master. This has been shown to allow accurate control while realistically conveying dynamic force information back to the operator.

WDM sensor network approach:bridging the gap towards POF-based photonic sensing

In this work a self-referenced technique for fiberoptic intensity sensors using virtual lock-in amplifiers is proposed and discussed. The topology is compatible with WDM networks so multiple remote sensors can simultaneously be interrogated. A hybrid approach combining both silica fiber Bragg gratings and polymer optical fiber Bragg gratings is analyzed. The feasibility of the proposed solution for potential medical environments and biomedical applications is shown and tested using a selfreferenced configuration based on a power ratio parameter.

Open-source virtual bronchoscopy for image guided navigation

This thesis describes the development of an open-source system for virtual bronchoscopy used in combination with electromagnetic instrument tracking. The end application is virtual navigation of the lung for biopsy of early stage cancer nodules. The open-source platform 3D Slicer was used for creating freely available algorithms for virtual bronchscopy. Firstly, the development of an open-source semi-automatic algorithm for prediction of solitary pulmonary nodule malignancy is presented. This approach may help the physician decide whether to proceed with biopsy of the nodule. The user-selected nodule is segmented in order to extract radiological characteristics (i.e., size, location, edge smoothness, calcification presence, cavity wall thickness) which are combined with patient information to calculate likelihood of malignancy. The overall accuracy of the algorithm is shown to be high compared to independent experts' assessment of malignancy. The algorithm is also compared with two different predictors, and our approach is shown to provide the best overall prediction accuracy. The development of an airway segmentation algorithm which extracts the airway tree from surrounding structures on chest Computed Tomography (CT) images is then described. This represents the first fundamental step toward the creation of a virtual bronchoscopy system. Clinical and ex-vivo images are used to evaluate performance of the algorithm. Different CT scan parameters are investigated and parameters for successful airway segmentation are optimized. Slice thickness is the most affecting parameter, while variation of reconstruction kernel and radiation dose is shown to be less critical. Airway segmentation is used to create a 3D rendered model of the airway tree for virtual navigation. Finally, the first open-source virtual bronchoscopy system was combined with electromagnetic tracking of the bronchoscope for the development of a GPS-like system for navigating within the lungs. Tools for pre-procedural planning and for helping with navigation are provided. Registration between the lungs of the patient and the virtually reconstructed airway tree is achieved using a landmark-based approach. In an attempt to reduce difficulties with registration errors, we also implemented a landmark-free registration method based on a balanced airway survey. In-vitro and in-vivo testing showed good accuracy for this registration approach. The centreline of the 3D airway model is extracted and used to compensate for possible registration errors. Tools are provided to select a target for biopsy on the patient CT image, and pathways from the trachea towards the selected targets are automatically created. The pathways guide the physician during navigation, while distance to target information is updated in real-time and presented to the user. During navigation, video from the bronchoscope is streamed and presented to the physician next to the 3D rendered image. The electromagnetic tracking is implemented with 5 DOF sensing that does not provide roll rotation information. An intensity-based image registration approach is implemented to rotate the virtual image according to the bronchoscope's rotations. The virtual bronchoscopy system is shown to be easy to use and accurate in replicating the clinical setting, as demonstrated in the pre-clinical environment of a breathing lung method. Animal studies were performed to evaluate the overall system performance.

Designing a S2-Enterprise (Smart x Sensing) Reference Model

Part 11: Reference and Conceptual Models