Mikania glomerata Sprengel (Asteraceae) influences the mutagenicity induced by doxorubicin without altering liver lipid peroxidation or antioxidant levels

As shown in numerous studies, natural compounds may exert adverse effects, mainly when associated with some drugs. The hydroalcoholic extract of Mikania glomerata is the pharmaceutical form present in commercially available syrup used for the treatment of respiratory diseases in popular Brazilian medicine. The objective of the present investigation was (1) to evaluate the preventive effects of standardized hydroalcoholic extract of M. glomerata (MEx) against antitumoral drug doxorubicin (DXR)-induced micronucleated polychromatic erythrocytes (MNPCE) in a subchronic assay in mice, and (2) to determine the liver content of malondialdehyde (MDA) and the antioxidants glutathione (GSH) and vitamin E (VE). Male Swiss mice were treated for 30 d with MEx added to drinking water, combined or not with DXR (90 mg/kg body weight) injected intraperitoneally (ip) 24 h before analysis. The results demonstrated that MEx produced no genotoxic damage, but significantly increased the frequency of MNPCE induced by DXR, indicating a drug-drug interaction. This rise was not accompanied by lipid peroxidation or antioxidants level reduction, as measured by MDA, GSH, and VE. Despite the presence of coumarin (a known antioxidant), MEx may exert adverse effects probably in association with mutagenic compounds, although this effect on DNA damage did not involve oxidative stress.

THE POTENTIAL OF INDUSTRIAL WASTE AND AGRICULTURAL FEEDSTOCK TOWARDS SUSTAINABLE BIOFUELS PRODUCTION: TECHNO-ECONOMIC AND ENVIRONMENTAL IMPACT PERSPECTIVES

This Ph.D. research is comprised of three major components; (i) Characterization study to analyze the composition of defatted corn syrup (DCS) from a dry corn mill facility (ii) Hydrolysis experiments to optimize the production of fermentable sugars and amino acid platform using DCS and (iii) Sustainability analyses. Analyses of DCS included total solids, ash content, total protein, amino acids, inorganic elements, starch, total carbohydrates, lignin, organic acids, glycerol, and presence of functional groups. Total solids content was 37.4% (± 0.4%) by weight, and the mass balance closure was 101%. Total carbohydrates [27% (± 5%) wt.] comprised of starch (5.6%), soluble monomer carbohydrates (12%) and non-starch carbohydrates (10%). Hemicellulose components (structural and non-structural) were; xylan (6%), xylose (1%), mannan (1%), mannose (0.4%), arabinan (1%), arabinose (0.4%), galatactan (3%) and galactose (0.4%). Based on the measured physical and chemical components, bio-chemical conversion route and subsequent fermentation to value added products was identified as promising. DCS has potential to serve as an important fermentation feedstock for bio-based chemicals production. In the sugar hydrolysis experiments, reaction parameters such as acid concentration and retention time were analyzed to determine the optimal conditions to maximize monomer sugar yields while keeping the inhibitors at minimum. Total fermentable sugars produced can reach approximately 86% of theoretical yield when subjected to dilute acid pretreatment (DAP). DAP followed by subsequent enzymatic hydrolysis was most effective for 0 wt% acid hydrolysate samples and least efficient towards 1 and 2 wt% acid hydrolysate samples. The best hydrolysis scheme DCS from an industry's point of view is standalone 60 minutes dilute acid hydrolysis at 2 wt% acid concentration. The combined effect of hydrolysis reaction time, temperature and ratio of enzyme to substrate ratio to develop hydrolysis process that optimizes the production of amino acids in DCS were studied. Four key hydrolysis pathways were investigated for the production of amino acids using DCS. The first hydrolysis pathway is the amino acid analysis using DAP. The second pathway is DAP of DCS followed by protein hydrolysis using proteases [Trypsin, Pronase E (Streptomyces griseus) and Protex 6L]. The third hydrolysis pathway investigated a standalone experiment using proteases (Trypsin, Pronase E, Protex 6L, and Alcalase) on the DCS without any pretreatment. The final pathway investigated the use of Accellerase 1500® and Protex 6L to simultaneously produce fermentable sugars and amino acids over a 24 hour hydrolysis reaction time. The 3 key objectives of the techno-economic analysis component of this PhD research included; (i) Development of a process design for the production of both the sugar and amino acid platforms with DAP using DCS (ii) A preliminary cost analysis to estimate the initial capital cost and operating cost of this facility (iii) A greenhouse gas analysis to understand the environmental impact of this facility. Using Aspen Plus®, a conceptual process design has been constructed. Finally, both Aspen Plus Economic Analyzer® and Simapro® sofware were employed to conduct the cost analysis as well as the carbon footprint emissions of this process facility respectively. Another section of my PhD research work focused on the life cycle assessment (LCA) of commonly used dairy feeds in the U.S. Greenhouse gas (GHG) emissions analysis was conducted for cultivation, harvesting, and production of common dairy feeds used for the production of dairy milk in the U.S. The goal was to determine the carbon footprint [grams CO2 equivalents (gCO2e)/kg of dry feed] in the U.S. on a regional basis, identify key inputs, and make recommendations for emissions reduction. The final section of my Ph.D. research work was an LCA of a single dairy feed mill located in Michigan, USA. The primary goal was to conduct a preliminary assessment of dairy feed mill operations and ultimately determine the GHG emissions for 1 kilogram of milled dairy feed.

Concentración de benciladenina, tipo y dosis de carbohidratos en el medio de cultivo para proliferación de brotes de Agave americana

Para evaluar la proliferación in vitro de brotes de Agave americana var. oaxacensis, piezas de callo con dos a tres brotes adventicios se establecieron en diversos medios de cultivo con pH 5,8 y consistencia de gel, con sales minerales MS, 100 mg L-1 myo-inositol, diversas concentraciones de benciladenina (BA) (0, 2, 4, 6, 8 y 10 mg L-1), tipo de carbohidrato (sacarosa o jarabe fructosado) y concentración de carbohidrato (20, 30, 40 g). Los cultivos se incubaron 60 días bajo luz fluorescente blanca en 16 h luz/8 h oscuridad, temperatura 20- 28°C. El experimento se estableció según un diseño completamente al azar con arreglo factorial 6x2x3. La sacarosa resultó mejor fuente de carbohidrato que el jarabe fructosado. Los explantos en el medio de cultivo sin BA y 20 g L-1 de sacarosa formaron cuatro brotes de 10,8 cm, con raíces adventicias. Al aumentar la concentración de BA y sacarosa los explantos formaron más brotes, pero en el medio con 6 mg L-1 BA y 40 g L-1 sacarosa los explantos formaron hasta 21 brotes de 6,5 cm de tamaño. La citocinina inhibió la formación de raíces.

Myanmar Sugar SMEs: History, Technology, Location and Government Policy

Small and medium enterprises (SMEs) engaged in sugar processing in Myanmar appeared in the last decade of the socialist era. An acute sugar deficit, restricted trade in white sugar, and high demand from the conventional dairy business led to the growth of sugar SMEs by appropriate blending of semi-finished products (syrup) in the fields, which were then processed in vacuum pans and centrifugals to obtain white sugar. This became a tradable commodity and sugar SMEs grew in clusters in big cities. They are family-owned businesses. However, they lack the bagasse-based power generation. In recent years, large modern sugar factories operated by private and military companies have emerged as key players. The current shortage of fuel feedstock and competition for raw materials have become driving forces that shift sugar SMEs from market-oriented to raw material-oriented locations. Internal competition among key players made sugar price highly volatile, too. Being placed on a level playing field, the whole industry should be upgraded in terms of price and quality to become export-oriented.

Commonplace book of Moses Appleton, 1791-1815 (inclusive)

Volume containing medicinal recipes, medical notes, poetry, and obituaries written by Dr. Moses Appleton (1773-1849). Many of the recipes were copied from medical texts or other publications. His "cure for the dropsy," taken from the New York Herald, contained stale cider, parsley, horseradish, oxymel squills (sea onion in honey), and juniper berries. For diarrhea, he prescribed a blackberry syrup. Several entries indicate Appleton practiced Thomsonian medicine, an alternative system based on use of botanicals. The medical notes include an account of his treatment of a man with smallpox in 1815, and entries on patients he inoculated with cowpox matter. Another entry dated in 1796 provides instructions from the Massachusetts Humane Society for "treatment to be used with persons apparently dead from drowning," which included blowing tobacco smoke in the victim's lungs and applying warm blankets for several hours. Appleton adds a note questioning whether or not the lungs also should be "often artificially inflated." There is additionally a history of prominent physicians dating from ancient Greece.

Life among the Shakers.

"Location of the Societies": p. 6-7.

Shaker almanac, 1886 : the mystery explained.

Almanac features biographies and portraits of American millionaires.

How the Shakers cook and the noted cooks of the country.

Imprint from Richmond, M.L.H. Shaker lit.

Building Resonance

Thesis (Master's)--University of Washington, 2016-06

The Effect of Fructose vs. Glucose Beverages on Low-Grade Systemic Inflammation

Thesis (Ph.D.)--University of Washington, 2016-04

Gelatinization of starch in mixed sugar systems

Sugars affect the gelatinization of starch, with the effect varying significantly between sugars. Since many food products contain a mixture of sugar sources, it is important to understand how their mixtures affect starch gelatinization. In a Rapid Visco Analyser study of maize starch gelatinization, changing proportions in binary mixtures of refined sugars saw a largely proportionate change in starch gelatinization properties. However, binary mixture of pure sugars and honey, or a model honey system (the main sugars in honey) and honey responded differently. Generally, replacing 25% or 50% of the refined sugar or model honey system with honey gave a large change in starch gelatinization properties, while further increases in honey level had little further effect. Differences between honey and buffered model honey system (either gluconic acid, or a mixture of citric acid and di-sodium phosphate) showed the sensitivity of starch gelatinization to the composition of the nonsaccharide component. (c) 2004 Swiss Society of Food Science and Technology. Published by Elsevier Ltd. All rights reserved.

The chromatographic separation of carbohydrate mixtures

The separation performance of a semicontinuous counter-current chromatographic refiner (SCCR7), consisting of twelve 5.4 cm id x 75cm long columns packed with calcium charged cross-linked polysytrene resin (KORELA VO7C), was optimised. An industrial barley syrup was used containing 42% fructose, 52% glucose and 6% maltose and oligosaccharides. The effects of temperature, flow rates and concentration on the distribution coefficients were evaluated and quantified by deriving general relationships. The effects of flow rates, feed composition and concentration on the separation performance of the SCCR7 were identified and general relationships between them and the switch time, which was found to be the controlling parameter, were developed. Fructose rich (FRP) and glucose rich (GRP) product purities of 99.9% were obtained at 18.6% w/v feed concentrations. When a 66% w/v feed concentration was used and product splitting technique was employed, the throughput was 32.1 kg sugar solids/m3 resin/hr. The GRP contained less than 4.5% fructose, the FRP was over 95% pure, and the respective concentrations were 22.56 and 11.29% w/v. Over 94% of the glucose and 95.78% of the fructose in the feed were recovered in the GRP and FRP respectively. By recycling the dilute product split fractions, the GRP and FRP concentrations were increased to 25.4 and 12.96% w/v; the FRP was 90.2% pure and the GRP contained 6.69% w/v fructose. A theoretical link between batch and semicontinuous chromatographic equipments has been determined. A computer simulation was developed predicting successfully the purging concentration profiles at `pseudo-equilibrium', and also certain system design parameters. An important further aspect of the work has been to study the behaviour of chromatographic bioreactor-separators. Such batch systems of 5.4cm id and lengths varying between 30 and 230cm, were used to investigate the effect of scaling up on the conversion of sucrose into dextran and fructose in the presence of the dextransucrase enzyme. Conversions of over 80% were achieved at 4 hr sucrose residence times. The crude dextransucrase was purified using centrifugation, ultrafiltration and cross-flow microfiltration techniques. Better enzyme stability was obtained by first separating the non-solid impurities using cross-flow microfiltration, and then removing the cells from the enzyme immediately before use by continuous centrifugation.

The release of nicotine from chewing gum formulations

The first clinically proven nicotine replacement product to obtain regulatory approval was Nicorette® gum. It provides a convenient way of delivering nicotine directly to the buccal cavity, thus, circumventing 'first-pass' elimination following gastrointestinal absorption. Since launch, Nicorette® gum has been investigated in numerous studies (clinical) which are often difficult to compare due to large variations in study design and degree of sophistication. In order to standardise testing, in 2000 the European Pharmacopoeia introduced an apparatus to investigate the in vitro release of drug substances from medical chewing gum. With use of the chewing machine, the main aims of this project were to determine factors that could affect release from Nicorette® gum, to develop an in vitro in vivo correlation and to investigate formulation variables on release of nicotine from gums. A standard in vitro test method was developed. The gum was placed in the chewing chamber with 40 mL of artificial saliva at 37'C and chewed at 60 chews per minute. The chew rate, the type of dissolution medium used, pH, volume, temperature and the ionic strength of the dissolution medium were altered to investigate the effects on release in vitro. It was found that increasing the temperature of the dissolution media and the rate at which the gums were chewed resulted in a greater release of nicotine, whilst increasing the ionic strength of the dissolution medium to 80 mM resulted in a lower release. The addition of 0.1 % sodium Jauryl sulphate to the artificial saliva was found to double the release of nicotine compared to the use of artificial saliva and water alone. Although altering the dissolution volume and the starting pH did not affect the release. The increase in pH may be insufficient to provide optimal conditions for nicotine absorption (since the rate at which nicotine is transported through the buccal membrane was found to be higher at pH values greater than 8.6 where nicotine is predominately unionised). Using a time mapping function, it was also possible to establish a level A in vitro in vivo correlation. 4 mg Nicorette® gum was chewed at various chew rates in vitro and correlated to an in vivo chew-out study. All chew rates used in vitro could be successfully used for IVIVC purposes, however statistically, chew rates of 10 and 20 chews per minute performed better than all other chew rates. Finally a series of nicotine gums was made to investigate the effect of formulation variables on release of nicotine from the gum. Using a directly compressible gum base, in comparison to Nicorette® the gums crumbled when chewed in vitro, resulting in a faster release of nicotine. To investigate the effect of altering the gum base, the concentration of sodium salts, sugar syrup, the form of the active drug, the addition sequence and the incorporation of surfactant into the gum, the traditional manufacturing method was used to make a series of gum formulations. Results showed that the time of addition of the active drug, the incorporation of surfactants and using different gum base all increased the release of nicotine from the gum. In contrast, reducing the concentration of sodium carbonate resulted in a lower release. Using a stronger nicotine ion-exchange resin delayed the release of nicotine from the gum, whilst altering the concentration of sugar syrup had little effect on the release but altered the texture of the gum.

Fiber-optic vibration sensing of cantilevers immersed in fluids

An all fiber-optical method to monitor densities and viscosities of liquids utilizing a steel cantilever (4 x 0.3 x 0.08 cm3) is presented. The actuation is performed by photothermally heating the cantilever at its base with an intensity-modulated 808 nm diode laser. The cantilever vibrations are picked up by an in-fiber Fabry Perot cavity sensor attached along the length of the cantilever. The fluid properties can be related to the resonance characteristics of the cantilever, e.g. a shift in the resonance frequency corresponds to a change in fluid density, and the width of the resonance peak gives information on the dynamic viscosity after calibration of the system. Aqueous glycerol, sucrose and ethanol samples in the range of 0.79–1.32 gcm−3 (density) and 0.89–702 mPas (viscosity) were used to investigate the limits of the sensor. A good agreement with literature values could be found with an average deviation of around 10 % for the dynamic viscosities, and 5–16 % for the mass densities. A variety of clear and opaque commercial spirits and an unknown viscous sample, e.g. home-made maple syrup, were analyzed and compared to literature values. The unique detection mechanism allows for the characterization of opaque samples and is superior to conventional microcantilever sensors. The method is expected to be beneficial in various industrial sectors such as quality control of food samples.

Dietary supplements based on borututu: wich is the most suitable choice for bioactive purposes?

Borututu ( Cochlospermum angolensis Welw.) is a widespread tree in Angola used since antiquity by traditional healers for the prevention and treatment of hepatic diseases and for the prophylaxis of malaria [1]. This plant is mostly consumed as infusions but is also available as dietary supplements, such as piiis, capsules, and syrups, among others. In the present study, the aim was to evaluate the proximate composition and energetic contribution of borututu as weii as its composition in hydrophilic (sugars and organic acids) and lipophilic (fatty acids and tocopherols) compounds, given the fact that this plant is directly introduced in some dietary supplements. Furthermore, the bioactivity (antioxidant, hepatoprotective and antimicrobial activities) of three different formulations of borututu (infusion, pills, and syrup) was assessed and compared, and since plant beneficial properties are often ascribed to phenolic compounds [2], the phenolic profile of the formulations was also analysed. Carbohydrates (88 g/100 g) and fat (2.5 g/100 g) were the major and tl1e minor components of the studied borututu dry barks, respectively, with an energetic contribution of 384 kcal/100 g. Fructose was the most abundant sugar (1.3 g/100 g), foilowed by sucrose, trehalose and glucose (1.1, 0.98 and 0.79 g/100 g, respectively). Oxalic (0.70 g/100 g), malic (0.63 g/100 g) and citric (0.57 g/100 g) acids were present in higher amounts but shikimic and fumaric acids were also detected. Among the fatty acids found in borututu, a prevalence of saturated fatty acids (SF A; 48.2%) was observed, whereas polyunsaturated (PUFA) and monounsaturated (MUFA) fatty acids were detected in relative percentages of 30.9% and 20.8%, respectively. P-tocopherol was the most abundant of the four isoforms found in the sample, foiiowed by o-, a- and y-tocopherol, present in concentrations of 597,43, 3.7 and 2.0 g/100 g, respectively. Borututu infusion revealed the highest antioxidant activity, with EC50 values ranging from 20 to 600 J.lg/mL and was the only formulation inhibiting the growth of an HepG2 ceii line, with a Gl5o value of 146 J.lg/mL. This formulation.also revealed the best antimicrobial capacity and proved to be able to inhibit the growth of Escherichia coli, E. coli ESBL, Staphylococcus aureus and Pseudomonas aeruginosa, with MIC values of 50, 6.2, 1.6 and 25 mg!mL, respectively. Pills revealed activity against some of the studied bacterial strains and the syrup did not reveal antimicrobial activity at the studied concentration. Eilagic acids, methyl ellagic acids, eucaglobulinlglobulusin B and (epi)gaiiocatechin-0-gallate were the compounds present in all the different formulations. The highest concentration of phenolic compounds was found in the infusion extract. Protocatechuic acid was the most abundant phenolic compound in the infusions, the only preparation where it was detected, whereas ( epi)gaiiocatechin- 0-gallate was the main phenolic in the pills and eucaglobulinlglobulusin in the syrup. In a general way, borututu proved to be a good source of phytochemicals such as phenolic compounds, with the infusions revealing the best bioactive properties.