Determination of acrylamide levels in selected commercial and traditional foods in Syria

Purpose: To determine acrylamide (AA) levels in different brands of commercial and traditional foodstuffs available in Syria by ultra-performance liquid chromatography-mass spectrometery (UPLCMS). Methods: A total of 63 samples were analyzed. Food samples were defatted by hexane and then extracted with methanol 98 % in a vortex mixer. Thereafter, Carrez I and Carrez II were added to precipitate proteins from the co-extractives and then centrifuged to obtain a clear aqueous extract that was evaporated to dryness. The extract was dissolved in 1 mL of water, eluted through a preconditioned Oasis HLB cartridge and then filtered. The filtrate was analyzed by UPLC-MS/MS to determine AA content. Results: Among the commercial foods tested, the highest acrylamide quantity was found in potato products (396 ± 3.59 – 1844 ± 5.29 μg kg−1) and the lowest in corn products (183 ± 2.64 – 366 ± 4.58 μg kg−1). This was followed by biscuits (57 ± 2.64 – 1433 ± 2.51 μg kg−1), breakfast cereals (121 ± 8.73 – 245 ± 3.60 μg kg−1), bread (119 ± 1.73 – 263 ± 3.60 μg kg−1) and then coffee (113 ± 2.64 - 64 ± 3.05 μg kg−1). Regarding traditional foods, the highest level of AA was found in AL- Mshabak (481 ± 2.08 μg kg−1) and AL-Awamat (421 ± 2.64 μg kg−1) followed by AL-Namora (282 ± 4.35 μg kg−1) and AL-Kenafa (242 ± 2.64 μg kg−1). It was also observed that the lowest amount of AA was in fried bread (230 μg kg−1), AL-Fatayer (192 ± 3.51 μg kg−1) and AL-Baqlawa (172 ± 4.35 μg kg−1) while Eid Aqras (130 ± 4.58 μg kg−1) and AL-Brazeq (167 ± 3.78 μg kg−1) contained the least amount of AA. Conclusion: The results indicate that the highest levels of AA are found in the most commonly consumed foods. There was significant difference (p < 0.05) in AA levels among different food items and within different brands of the same product.

The importance of taste on dietary choice, behaviour and intake in a group of young adults

The 'taste of food' plays an important role in food choice. Furthermore, foods high in fat, sugar and salt are highly palatable and associated with increased food consumption. Research exploring taste importance on dietary choice, behaviour and intake is limited, particularly in young adults. Therefore, in this study a total of 1306 Australian university students completed questionnaires assessing dietary behaviors (such as how important taste was on food choice) and frequency of food consumption over the prior month. Diet quality was also assessed using a dietary guideline index. Participants had a mean age of 20 ± 5 years, Body Mass Index (BMI) of 22 ± 3 kg/m(2), 79% were female and 84% Australian. Taste was rated as being a very or extremely important factor for food choice by 82% of participants. Participants who rated taste as highly important, had a poorer diet quality (p = 0.001) and were more likely to consume less fruit (p = 0.03) and vegetables (p = 0.05). Furthermore, they were significantly more likely to consume foods high in fat, sugar and salt, including chocolate and confectionary, cakes and puddings, sweet pastries, biscuits, meat pies, pizza, hot chips, potato chips, takeaway meals, soft drink, cordial and fruit juice (p = 0.001-0.02). They were also more likely to consider avoiding adding salt to cooking (p = 0.02) and adding sugar to tea or coffee (p = 0.01) as less important for health. These findings suggest that the importance individuals place on taste plays an important role in influencing food choice, dietary behaviors and intake.

Root-depth profiles of important agricultural crops

Based on a literature review we describe root density profiles in terms of a logistic dose-response function for important global agricultural crops (wheat, maize, rice, barley, soybean, pulses, cotton, potato, sunflower, rye, rapeseed, and sugarbeet). These root density profiles can be used in 1-D macroscopic root water uptake models. For use in 1-D microscopic root water uptake models, we analyze root density data in terms of the half mean distance between roots. Based on the database there is little support for a predictive relationship between parameters of the root density distribution of agricultural crops and climate or management factors. Constancy of the shape of the root density distribution with time is shown not to hold in some experiments, but evidence is anecdotical. At present the basis to describe rooting profiles with depth only seems to allow profiles which are constant in time and with depth. The correlation between half mean distance and drought sensitivity is investigated and conclusions will be presented.

Gräs från våtmark som additiv i bränslepellets : Effekter på pelletskvalitet och energiförbrukning

Because of global warming the energy production development has progressed towards more renewable energy sources. Biomass has great potential in this matter and pellet is already a big market that has increased seven times the past decade. A periodically strained woodchip resource market and statements of short supply in the future has got actors exploring opportunities with other commodities. Grasses such as Canary grass has shown great potential in this matter and in this study a wetland grass is tested as an additive, 0,5, 1,0, 1,5, and 1,9%, with spruce woodchips. The test production series was performed at a production unit located at the department of environmental and energy system at Karlstad University, Karlstad. Quality was controlled accordingly to the European standard and parameters such as energy consumption, moisture content, mechanical durability and bulk density was tested. For comparison, a sample with only spruce wood chips was produced, and a sample containing 1% of a commonly used additive, potato starch. The results showed that a decrease in energy consumption with 14% when 2% wetland grass was added, part of the decline may be due to the increased production flow compared with the reference sample. The positive effects on decrease in energy consumption, that 1% potato starch results in, is equal to reults from 1% wetlandgrass. This indicates lubricating properties in wetlandgrass. This is attributed to that herbaceous plants have a high content of extracts such as waxes and that they cause less friction in the press. Tests also showed that pellet with wetland grass did not qualify the European standard in terms of mechanical durability. Extracts can form a weak boundary layer in the pellet and cause this. A possible trend shows a better mechanical durability with more grass in pellets. The presence of different size of particles can be a reason. Moisture content qualifies according to the European standard but is below optimum 8%. This despite to relatively high moisture content in the mixer. Higher moisture content in the press would certainly result in a generally higher quality. Suggestions for future studies are to produce pellets with greater distribution on the wetland grass added, to easier interpret a connection. Also examine the extracts behavior with different moisture content. For a sustainable development accordingly renewable energy it is important to ensure the future commodity market for pellets. Further studies should be performed to help the development of alternative raw materials in conjunction with pellet production.

Experimental and modeling studies of forced convection storage and drying systems for sweet potatoes

Sweet potato is an important strategic agricultural crop grown in many countries around the world. The roots and aerial vine components of the crop are used for both human consumption and, to some extent as a cheap source of animal feed. In spite of its economic value and growing contribution to health and nutrition, harvested sweet potato roots and aerial vine components has limited shelf-life and is easily susceptible to post-harvest losses. Although post-harvest losses of both sweet potato roots and aerial vine components is significant, there is no information available that will support the design and development of appropriate storage and preservation systems. In this context, the present study was initiated to improve scientific knowledge about sweet potato post-harvest handling. Additionally, the study also seeks to develop a PV ventilated mud storehouse for storage of sweet potato roots under tropical conditions. In study one, airflow resistance of sweet potato aerial vine components was investigated. The influence of different operating parameters such as airflow rate, moisture content and bulk depth at different levels on airflow resistance was analyzed. All the operating parameters were observed to have significant (P < 0.01) effect on airflow resistance. Prediction models were developed and were found to adequately describe the experimental pressure drop data. In study two, the resistance of airflow through unwashed and clean sweet potato roots was investigated. The effect of sweet potato roots shape factor, surface roughness, orientation to airflow, and presence of soil fraction on airflow resistance was also assessed. The pressure drop through unwashed and clean sweet potato roots was observed to increase with higher airflow, bed depth, root grade composition, and presence of soil fraction. The physical properties of the roots were incorporated into a modified Ergun model and compared with a modified Shedd’s model. The modified Ergun model provided the best fit to the experimental data when compared with the modified Shedd’s model. In study three, the effect of sweet potato root size (medium and large), different air velocity and temperature on the cooling/or heating rate and time of individual sweet potato roots were investigated. Also, a simulation model which is based on the fundamental solution of the transient equations was proposed for estimating the cooling and heating time at the centre of sweet potato roots. The results showed that increasing air velocity during cooling and heating significantly (P < 0.05) affects the cooling and heating times. Furthermore, the cooling and heating times were significantly different (P < 0.05) among medium and large size sweet potato roots. Comparison of the simulation results with experimental data confirmed that the transient simulation model can be used to accurately estimate the cooling and heating times of whole sweet potato roots under forced convection conditions. In study four, the performance of charcoal evaporative cooling pad configurations for integration into sweet potato roots storage systems was investigated. The experiments were carried out at different levels of air velocity, water flow rates, and three pad configurations: single layer pad (SLP), double layers pad (DLP) and triple layers pad (TLP) made out of small and large size charcoal particles. The results showed that higher air velocity has tremendous effect on pressure drop. Increasing the water flow rate above the range tested had no practical benefits in terms of cooling. It was observed that DLP and TLD configurations with larger wet surface area for both types of pads provided high cooling efficiencies. In study five, CFD technique in the ANSYS Fluent software was used to simulate airflow distribution in a low-cost mud storehouse. By theoretically investigating different geometries of air inlet, plenum chamber, and outlet as well as its placement using ANSYS Fluent software, an acceptable geometry with uniform air distribution was selected and constructed. Experimental measurements validated the selected design. In study six, the performance of the developed PV ventilated system was investigated. Field measurements showed satisfactory results of the directly coupled PV ventilated system. Furthermore, the option of integrating a low-cost evaporative cooling system into the mud storage structure was also investigated. The results showed a reduction of ambient temperature inside the mud storehouse while relative humidity was enhanced. The ability of the developed storage system to provide and maintain airflow, temperature and relative humidity which are the key parameters for shelf-life extension of sweet potato roots highlight its ability to reduce post-harvest losses at the farmer level, particularly under tropical climate conditions.

Land use change from rainforests to oil palm plantations and food gardens in Papua New Guinea: Effects on soil properties and S fractions

Changes in soil sulfur (S) fractions were assessed in oil palm and food garden land use systems developed on forest vegetation in humid tropical areas of Popondetta in northern Province. The study tested a hypothesis that S in food gardens are limiting nutrient factor and are significantly lower than in plantations and forests. Subsistence food gardens are under long-term slash and burn practice of cropping and such practice is expected to accelerate loss of biomass S from the ecosystem. From each land use, surface soil (0–15 cm) samples were characterised and further pseudocomplete fractionated for S. Conversion of forest to oil palm production decreased (p<0.001) soil pH and electrical conductivity values. The reserve S fraction in soil increased significantly (p<0.05) due to oil palm production ( 28 %) and food gardening activity (∼ 54 %). However, plant available SO42--S was below 15 mg kg^(−1) in the food garden soils and foliar samples of sweet potato crop indicating deficiency of plant available S. Soil organic carbon content (OC) was positively and significantly correlated to total S content (r=0.533; p<0.001) among the land use systems. Thus, crop management practices that affect OC status of the soils would potentially affect the S availability in soils. The possible changes in the chemical nature of mineralisable organic S compounds leading to enhanced mineralisation and leaching losses could be the reasons for the deficiency of S in the food garden soils. The results of this study conclude that long-term subsistence food gardening activity enriched top soils with reserve S or total S content at the expense of soluble S fraction. The subsistence cropping practices such as biomass burning in food gardens and reduced fallow periods are apparently threatening food security of oil palm households. Improved soil OC management strategies such as avoiding burning of fallow vegetation, improved fallows, mulching with fallow biomass, use of manures and S containing fertilisers must be promoted to sustain food security in smallholder oil palm system.

Gastrodiplomacia como herramienta de política exterior. estudio de caso: Perú

El presente trabajo tiene como objetivo analizar la manera mediante la cual Perú ha incor- porado la gastrodiplomacia a su estrategia de diplomacia cultural como componente de su política exterior. Con el fin de cumplir este propósito, se va a defender que desde el 2008 el país Inca ha incorporado la gastrodiplomacia a su estrategia de diplomacia cultural em- pleando dos herramientas. Primero, a través de su Plan de Política Exterior Cultural, en donde se señalan objetivos claros en temas de gastronomía. En segundo lugar, con el uso de su marca país mediante la cual se promociona al Perú como un país atractivo gracias a su amplia oferta gastronómica. El trabajo es de carácter analítico y descriptivo ya que pretende entender la manera en la que Perú incorporó la gastrodiplomacia en su política exterior y describir esos objetivos y características de su Plan de Política Exterior Cultural y de su estrategia de marca país.

First report on Meloidogyne chitwoodi hatching inhibition activity of essential oils and essential oils fractions

The Columbia root-knot nematode (CRKN), Meloidogyne chitwoodi, is an EPPO A2 type quarantine pest since 1998. This nematode causes severe damage in economically important crops such as potato and tomato, making agricultural products unacceptable for the fresh market and food processing. Commonly used nematicidal synthetic chemicals are often environmentally unsafe. Essential oils (EOs) may constitute safer alternatives against RKN. EOs, isolated from 56 plant samples, were tested against CRKN hatching, in direct contact bioassays. Some of the most successful EOs were fractionated and the hydrocarbon molecules (HM) and oxygen-containing molecules (OCM) fractions tested separately. 24 EOs displayed very strong hatching inhibitions (≥90 %) at 2 µL mL−1 and were further tested at lower concentrations. Dysphaniaambrosioides, Filipendula ulmaria, Ruta graveolens, Satureja montana and Thymbra capitata EOs revealed the lowest EC50 values (<0.15 µL mL−1). The main compounds of these EOs, namely 2-undecanone, ascaridol, carvacrol, isoascaridol, methyl salicylate, p-cymene and/or γ-terpinene, were putatively considered responsible for CRKN hatching inhibition. S. montana and T. capitata OCM fractions showed hatching inhibitions higher than HM fractions. The comparison of EO and corresponding fractions EC50 values suggests interactions between OCM and HM fractions against CRKN hatching. These species EOs showed to be potential environmentally friendly CRKN hatching inhibitors; nonetheless, bioactivity should be considered globally, since its HM and OCM fractions may contribute, diversely, to the full anti-hatching activity.

Biotechnology and crop protection in Brazil.

The process of modernization of Brazilian agriculture aimed at increasing the productivity in response to the high demand for agricultural products in the world market and it was based on the intensive use of inputs such as agrochemicals, intense mechanisation and breeding of new varieties. Among these, pesticides were incorporated in almost all production systems. Over reliance on pesticide use has produced many negative effects on both biotic and abiotic components of the environment, generating chemical contamination of soil and water, decrease in biological diversity of agroecosystems, disruption of natural cycles, pest resistance, intoxication of growers, among others. The consumption of pesticides in Brazil was 151.8 thousand tonnes in 1989, and today the country is the fifth world market of these products. The use of pesticides increased from 16 thousand tonnes (a.i.) in 1964 to 60.2 thousand tonnes in 1991, while the area planted to crops grew from 28.4 to 50.0 million ha in the same period. This means an increase of 276.2% in consumption of pesticides compared to an increase of 76% in planted area. Even with this large increase in the use of pesticides, the losses caused by pests have not been significantly reduced, and the net gain in crop productivity has been low. On the other hand, problems with food contamination, environmental degradation of growers have considerably mounted. It is possible to define two classes of crops regarding intense use of pesticides. One is represented by those crops that occupy large areas, and therefore contribute to a large amont of pesticides used for pest control in a country basis. The other class comprises crops that require large amounts of pesticides per unit of area, but not necessarily represent large amounts of pesticides used coutry-wide. Based on the classes proposed, citrus, soybean and sugarcane stand as crops with a nationally great consumption of pesticides, while tomato, potato and citrus are important as intensive users of pesticides. In this paper the biotechnologies in use, the biotechnologies in advanced stages of development, the main constraints to the development and use of biotechnlology and the impact of pesticed on the environment are discussed.

Modelagem da bioconcetração de pesticidas em batatas.

Apresentamos um modelo que estima o fator de bioconcentracão (BCF) de pesticidas em batatas supondo que o pesticida na solução do solo é absorvido pela batata por difusão passiva,seguindo a segunda lei de Fick.Os pesticidas do modelo são compostos orgânicos não-iônicos, tradicionalmente utilizados no cultivo de batatas que degradam no solo de acordo com uma equação cinética de primeira ordem. Este trabalho apresenta uma expressão que relaciona o BCF com a taxa de eliminação do pesticida pela batata, com a taxa de acumulação do pesticida na batata, com a taxa de crescimento da batata, e com a taxa de degradação do pesticida no solo. O BCF foi estimado supondo-se estado de equilíbrio estacionário do quociente entre a concentração do pesticida na batata e a concentração do pesticida na solução do solo. O modelo foi construído baseado no trabalho de Trapp et al. (2007), [Diffusion of PAH in Potato and Carrrot Slices and Applications for a Potato Model] no qual é apresentada uma expressão para calcular a difusividade de substâncias orgânicas persistentes em batatas. A modelagem consistiu em adicionar ao modelo de Trapp et al. (2007) a hipótese de que o pesticida degrada no solo. O valor do BCF sugere um conjunto de pesticidas que devem ser prioritariamente monitorados em cultivos de batatas. Foi estimado o BCF dos pesticidas methamidophos, cymoxanil, carbofuran, aldicarb, metalaxyl, fenamiphos, carbaryl, triazophos, tebuconazole, propiconazole, chlorothalonil e cypermethrin.

Notas sobre mandioca e outras plantas tuberosas no Pará.

1974