Efeito residual de quatro aplicações anuais de lodo de esgoto e vinhaça na qualidade tecnológica da cana-de-açúcar

O principal objetivo deste trabalho foi avaliar os efeitos residuais, por quatro anos seguidos, de diferentes tipos de resíduos, aplicados de formas e em doses distintas, sobre a qualidade tecnológica da cana-de-açúcar de quinto corte (cultivar SP 81-3250). Os tratamentos testados são combinações de dois tipos de resíduos (lodo de esgoto; vinhaça; lodo de esgoto + vinhaça) com dois modos de aplicação (ao lado da linha de cultivo e em área total) e com duas doses (100 e 200%), e um tratamento-testemunha. O delineamento experimental foi em blocos casualizados, com três repetições, totalizando 39 parcelas. As variáveis analisadas foram: percentagem de sólidos solúveis no caldo extraído (Brix % C.E.), percentagem aparente de sacarose no caldo extraído (Pol % C.E.), percentagem da fibra na cana (Fibra % cana), pureza (%), percentagem aparente de sacarose na cana (Pol % cana), percentagem de açúcares redutores na cana (AR % cana), percentagem de açúcares redutores totais na cana (ART % cana) e açúcares totais recuperáveis (ATR). Os fatores de variação testados (tipo de resíduo, modo de aplicação e doses) não promoveram alterações na qualidade e não comprometeram a valorização da cana-de-açúcar.

Efeitos do glyphosate e sulfometuron-methyl no crescimento e na qualidade tecnológica da cana-de-açúcar

Os herbicidas, mesmo quando usados em doses reduzidas ou utilizados como maturadores, podem alterar a morfofisiologia da planta, o que pode levar a modificações qualitativas e quantitativas na produção. O presente estudo objetivou avaliar a eficiência agronômica e os efeitos, durante o crescimento da cana-soca, da aplicação de glyphosate e sulfometuron-methyl em baixas doses. O delineamento experimental utilizado foi o de blocos casualizados, com quatro repetições. Os tratamentos foram constituídos pelos herbicidas sulfometuron-methyl e glyphosate em diferentes doses e misturas e por uma testemunha (sem aplicação dos produtos). Uma linha de plantas de cana-de-açúcar foi destinada à aferição da qualidade tecnológica, sendo estabelecido 1 m aleatório a cada época de amostragem. Os colmos coletados foram submetidos ao desponte na altura da gema apical e à desfolha; em seguida, foram encaminhados para processamento segundo a metodologia do Sistema de Pagamento de Cana pelo Teor de Sacarose (SPCTS), sendo considerados os parâmetros tecnológicos: pol cana (PCC), pureza do caldo (PUI), açúcar total recuperável (ATR) e Brix. Nas soqueiras de cana-de-açúcar, realizaram-se análises de crescimento (altura e perfilhos). As avaliações foram realizadas na pré-colheita (30 dias após aplicação dos maturadores) e 30, 60, 90, 120, 150 e 180 dias após a colheita. Os herbicidas glyphosate e sulfometuron-methyl propiciaram melhoria da qualidade tecnológica da matéria-prima,com incrementos significativos na pureza do caldo e no Brix. A aplicação dos produtos não interferiu na produtividade e no teor de açúcar. Houve efeito estimulante no perfilhamento quando se usou glyphosate na dose de 400 mL ha-1 e redução em crescimento (altura) no início do desenvolvimento da cana, porém, com o tempo, o efeito não se manteve.

Characterization of the Genetic Variability of a Sugarcane Commercial Cross Through Yield Components and Quality Parameters

The phenotypic characterization as well as the knowledge of the correlation among traits, is the first step to quantify the potential of a cross for further QTL (quantitative trait loci) detection. The present work aimed to evaluate the yield components and quality parameters variability of a mapping population derived from a bi-parental cross between IACSP95-3018 and IACSP93-3046 at plant cane and ratoon cane as well as to estimate the heritabilities and pair-wise correlation among the traits evaluated. The progeny clones differed significantly for the traits measures indicating the existence of significant amount of variability among them as also as the presence of transgressive clones. Broad-sense heritabilities values were generally high for stalk diameter, stalk weight, stalk height, Brix and Pol%Cane in plant cane and ratoon cane. Tones of sugarcane per hectare (TCH) were significantly correlated with stalk weight and stalk number in both years. Regarding to all the yield components, stalk number together with stalk weight were the most important components in the determination of TCH. While fiber and Pol%Cane were negative correlated showing that they are inversely correlated traits. © 2012 Society for Sugar Research & Promotion.

Qualidade tecnológica e produtividade agroindustrial de cana-deaçúcar submetida a adubação com zinco

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Identificação de marcadores microssatélites genômicos e funcionais associados a parâmetros agroindustriais em cana-de-açúcar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aspectos agrotecnológicos, florescimento, impurezas vegetais e produção de bagaço de cultivares de cana-de-açúcar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Manejo da soqueira de cana-de-açúcar submetida à queima acidental da palhada remanescente da colheita mecanizada

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Adaptabilidade e estabilidade de clones de cana-de-açúcar no Estado de São Paulo

Pós-graduação em Agronomia - FEIS

Potencial produtivo da cana-de-açúcar sob irrigação por gotejamento em função de variedades e ciclos

This study aimed to evaluate the yield potential of different varieties of sugarcane under drip irrigation in two growth cycles. A trial was set up in October 2006 at Jaú region (São Paulo state, Brazil), in an experimental field with a eutrophic Ultisol. The experiment was conducted in randomized complete blocks with factorial treatment structure 8 x 2, constituted by eight sugarcane varieties and two crop cycles, with six replicates. Stalk productivity (TCH), sugar productivity (TPH), juice quality traits and water use efficiency in relation to stalk productivity were evaluated in each crop cycle. It was observed that varieties of sugarcane respond differently to full irrigation, and this response is influenced by climatic conditions of the agricultural year. In this study, only the first evaluation cycle (plant cane) was decisive to differentiate the performance among the varieties. The varieties IAC91-1099, IACSP96-3060, RB855536, RB867515 and SP85-1115 showed higher agro-industrial yield potential and less consumption of water and can be recommended for the management of production under drip irrigation.

Comportamento da cana-de-açúcar em duas safras e atributos físicos do solo, sob diferentes tipos de preparo

The tillage comprises on average 25% of the cost of deploying a reed, so this cost reduction measures are desirable since they do not compromise the quality of the operation and longevity of sugarcane. The objective was to evaluate the effect of different tillage systems in Acrustox, correlating soil physical properties and characteristics of sugarcane agroindustrial plant cane and ratoon cane. We used five types of soil tillage, over experimental design in blocks with five replications. The particle size was measured every 0.1 m to 0.4 m depth, through deformed soil samples collected at the end of the first growth cycle of the culture. For other soil physical properties: bulk density, total porosity and water content, assessments were performed at the end of each cycle, collecting soil samples in layers of 0-0.20 to 0.21-0.40 m, in addition to performing the penetration resistance, using a penetrometer impact. The response of sugarcane depending on the types of tillage was determined from the evaluation of productivity per hectare of stem (TCH), sugar (TPH), the values of pol % cane (AP), sugar total recoverable (ATR) and fiber samples collected at harvest stalk of sugarcane plant and ratoon cane. In the tillage studied, there was a change of the physical attributes of the soil, causing reduced productivity in 2009/2010 crop, compared with the 2008/2009 season. In tillage system of furrowing direct lowest result was observed for TCH, especially in 2009/2010 crop, when the difference with conventional tillage was 20.53 Mg ha(-1).

Estimativas de parâmetros genéticos e fenotípicos em uma população de cana-de-açúcar e estratégias de seleção

A seleção fenotípica é o método de seleção tradicional utilizado nos estágios iniciais de seleção na maioria dos programas de melhoramento genético de cana-de-açúcar após o desenvolvimento de uma população segregante. A maioria das variedades comerciais utilizadas atualmente deriva deste método. Recentemente tem sido propostas estratégias de seleção baseada na avaliação de famílias em gerações precoces em diversos programas de melhoramento de cana-de-açúcar ao redor do mundo, como o objetivo de melhora a resposta à seleção, bem como reduzir o tempo e custo necessários para o desenvolvimento de novas variedades. No presente estudo foram avaliadas 110 famílias de cana-de-açúcar em um delineamento em blocos ao acaso com duas repetições, no ano agrícola de 2012/2013, na Estação Experimentas da empresa CanaVialis, localizada em Conchal, SP. As parcelas consistiram de um sulco de 50 m, contendo 96 plantas (\"seedlings\"). Os seguintes caracteres foram avaliados no estágio de cana planta: diâmetro do colmo (DIA), altura do colmo (ALT) número de colmos por touceira (NCP), número de colmos por touceira na parcela total (NCT); teor de sólidos solúveis (BRIX), teor de açúcar no laboratório (POL) toneladas de cana por hectare (TCH) e toneladas de açúcar por hectare (TPH). Os resultados indicaram que a população tem grande variabilidade genética entre médias de famílias bem como dentro de famílias. Foram detectadas correlações genotípicas positivas entre TCH e os outros caracteres, bem como entre TPH e os outros caracteres. Com base nestes resultados discute-se uma estratégia de seleção com base na seleção para TPH aplicada nas médias de famílias, seguido da seleção fenotípica para ALT, DIA e NCP dentro das famílias selecionadas, priorizando NCP.

Modelling the flow of cane constituents through the milling process of a raw sugar factory

This thesis reports on an investigation to develop an advanced and comprehensive milling process model of the raw sugar factory. Although the new model can be applied to both, the four-roller and six-roller milling units, it is primarily developed for the six-roller mills which are widely used in the Australian sugar industry. The approach taken was to gain an understanding of the previous milling process simulation model "MILSIM" developed at the University of Queensland nearly four decades ago. Although the MILSIM model was widely adopted in the Australian sugar industry for simulating the milling process it did have some incorrect assumptions. The study aimed to eliminate all the incorrect assumptions of the previous model and develop an advanced model that represents the milling process correctly and tracks the flow of other cane components in the milling process which have not been considered in the previous models. The development of the milling process model was done is three stages. Firstly, an enhanced milling unit extraction model (MILEX) was developed to access the mill performance parameters and predict the extraction performance of the milling process. New definitions for the milling performance parameters were developed and a complete milling train along with the juice screen was modelled. The MILEX model was validated with factory data and the variation in the mill performance parameters was observed and studied. Some case studies were undertaken to study the effect of fibre in juice streams, juice in cush return and imbibition% fibre on extraction performance of the milling process. It was concluded from the study that the empirical relations developed for the mill performance parameters in the MILSIM model were not applicable to the new model. New empirical relations have to be developed before the model is applied with confidence. Secondly, a soluble and insoluble solids model was developed using modelling theory and experimental data to track the flow of sucrose (pol), reducing sugars (glucose and fructose), soluble ash, true fibre and mud solids entering the milling train through the cane supply and their distribution in juice and bagasse streams.. The soluble impurities and mud solids in cane affect the performance of the milling train and further processing of juice and bagasse. New mill performance parameters were developed in the model to track the flow of cane components. The developed model is the first of its kind and provides some additional insight regarding the flow of soluble and insoluble cane components and the factors affecting their distribution in juice and bagasse. The model proved to be a good extension to the MILEX model to study the overall performance of the milling train. Thirdly, the developed models were incorporated in a proprietary software package "SysCAD’ for advanced operational efficiency and for availability in the ‘whole of factory’ model. The MILEX model was developed in SysCAD software to represent a single milling unit. Eventually the entire milling train and the juice screen were developed in SysCAD using series of different controllers and features of the software. The models developed in SysCAD can be run from macro enabled excel file and reports can be generated in excel sheets. The flexibility of the software, ease of use and other advantages are described broadly in the relevant chapter. The MILEX model is developed in static mode and dynamic mode. The application of the dynamic mode of the model is still under progress.

Influence of Mahanarva fimbriolata (Stål) (Hemiptera: Cercopidae) injury on the quality of cane juice

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Direct Determination of Sugar Cane Quality Parameters by X-ray Spectrometry and Multivariate Analysis

Current methods for quality control of sugar cane are performed in extracted juice using several methodologies, often requiring appreciable time and chemicals (eventually toxic), making the methods not green and expensive. The present study proposes the use of X-ray spectrometry together with chemometric methods as an innovative and alternative technique for determining sugar cane quality parameters, specifically sucrose concentration, POL, and fiber content. Measurements in stem, leaf, and juice were performed, and those applied directly in stem provided the best results. Prediction models for sugar cane stem determinations with a single 60 s irradiation using portable X-ray fluorescence equipment allows estimating the % sucrose, % fiber, and POL simultaneously. Average relative deviations in the prediction step of around 8% are acceptable if considering that field measurements were done. These results may indicate the best period to cut a particular crop as well as for evaluating the quality of sugar cane for the sugar and alcohol industries.