Virulence attributes and genetic variability of oral Candida albicans and Candida tropicalis isolates

The wide spectrum of candidiasis and its clinical importance encourage the research with the purpose of clarifying the mechanisms of pathogenicity and identification of virulence factors of Candida sp. Therefore, the aim of this study was to verify the adhesion capacity, protease activity and genotypic diversity of oral C. albicans and C. tropicalis isolates. The adhesion ability to the extracellular matrix glycoproteins laminin and fibronectin was evaluated using the ELISA technique. The research of proteases was carried out in agar plate containing bovine albumin and through a quantitative method in buffer solution containing haemoglobin. Intra and interspecies polymorphisms was verified through random amplified polymorphic DNA (RAPD) technique. All C. albicans and C. tropicalis isolates binded to immobilised laminin and fibronectin. Ca33 and Ct13 isolates had relative adhesion index significantly higher than the other isolates for both glycoproteins (P < 0.001). Protease activity was observed in all isolates of C. albicans using either the semi-quantitative or quantitative assay. The protease activity of C. tropicalis was better detected through the quantitative assay. The genotypic diversity by RAPD revealed a heterogeneous population in both species. Nevertheless, C. tropicalis presented higher genetic variability than C. albicans strains.

Effect of NaF and TiF4 varnish and solution on bovine dentin erosion plus abrasion in vitro

Objectives. This in vitro study aimed to analyze the effect of TiF4 compared to NaF varnishes and solutions, to protect against dentin erosion associated with abrasion. Materials and methods. Bovine dentin specimens were pre-treated with NaF-Duraphat (2.26% F), NaF/CaF2-Duofluorid (5.63% F), experimental-NaF (2.45% F), experimental-TiF4 (2.45% F) and placebo varnishes; NaF (2.26% F) and TiF4 (2.45% F) solutions. Controls remained untreated. The erosive pH cycling was performed using a soft drink (pH 2.6) 4 x 90 s/day and the toothbrushing-abrasion 2 x 10 s/day, in vitro for 5 days. Between the challenges, the specimens were exposed to artificial saliva. Dentin tissue loss was measured profilometrically (mu m). Results. ANOVA/Tukey's test showed that all fluoridated varnishes (Duraphat, 7.5 +/- 1.1; Duofluorid, 6.8 +/- 1.1; NaF, 7.2 +/- 1.9; TiF4, 6.5 +/- 1.0) were able to significantly reduce dentin tissue loss (40.7% reduction compared to control) when compared to placebo varnish (11.2 +/- 1.3), control (11.8 +/- 1.7) and fluoridated (NaF, 9.9 +/- 1.8; TiF4, 10.3 +/- 2.1) solutions (p < 0.0001), which in turn did not significantly differ from each other. Conclusion. All fluoridated varnishes, but not the solutions, had a similar performance and a good potential to reduce dentin tissue loss under mild erosive and abrasive conditions in vitro. Risk patients for erosion and abrasion, especially those with exposed dentin, should benefit from this clinical preventive measure. Further research has to confirm this promising result in the clinical situation.

N-Acetylcysteine protects the peritoneum from the injury induced by hypertonic dialysis solution

Background: Oxidative stress has been implicated in the development of peritoneal damage. The aim of this study was to evaluate the effects of N-acetylcysteine (NAC) in a rat peritoneal infusion model. Methods: Eighteen male Wistar rats were divided in 3 groups: (i) control group; (ii) HDS group, receiving peritoneal dialysis solution (PDS); and (iii) HDS+NAC group, receiving PDS and oral NAC. Six weeks later they were evaluated for dialysate to plasma urea ratio (D/P), ratio of glucose concentration in peritoneal fluid (G1/G0), thiobarbituric acid reactive substances in plasma and urine and histology of peritoneal membrane. Results: The HDS+NAC group presented a lower increase in solute transport (D/P 0.51 +/- 0.1, and G1/GO 0.35 +/- 0.06) in comparison with the HDS group (D/P 0.67 +/- 0.1; p=0.03, and G1/G0 0.27 +/- 0.07; p=0.01). The HDS+NAC group showed lower thiobarbituric acid reactive substance concentrations compared with the HDS group. In the treated group, the peritoneal membrane presented lower thickness. Conclusions: Functional and histological peritoneal changes were significantly reduced by the treatment with NAC.

Evaluation of experimental cleanser solution of Ricinus communis: effect on soft denture liner properties

Objective: This study evaluated colour stability, hardness and roughness of soft denture liners after immersion in various cleansers. Materials and methods: Thirty specimens (14 mm x 4 mm) of Elite Soft Relining (ES) and Mucopren Soft (MS) were randomly immersed in distilled water at 37 degrees C, sodium hypochlorite 1%, and an experimental Ricinus communis solution (RC) for 7, 15 and 183 continuous days. Results: ANOVA (p < 0.05) and Tukey's test indicated that after T7 (mu =8.79 +/- 7.36); T15 (mu = 4.23 +/- 2.62) and T183 (mu = 8.78 +/- 3.16), MS presented a higher increase in hardness than ES. After T7, MS underwent an increase in roughness (mu = 0.09 +/- 0.80); ES underwent a decrease (mu = -0.08 +/- 0.16). RC caused the smallest variation in roughness. After T15, both materials presented an increase in roughness. After T183, ES (mu = -0.30 +/- 0.48) presented a higher roughness variation than MS (mu = -0.07 +/- 0.32). Hypochlorite caused an increase in roughness (mu = 0.02 +/- 0.19). Conclusion: After all periods ES presented higher colour alteration than MS; highest colour alteration was caused by hypochlorite. Both materials were more stable after immersion in RC.

Keratocystic odontogenic tumors and Carnoy's solution: results and complications assessment

Oral Diseases (2012) 18, 548557 Objective: Keratocystic odontogenic tumors (KOTs) can be treated with Carnoys solution, although this treatment modality is not free from complications. It is important to verify the incidence of complications after the use of Carnoys solution and compare these with the literature. Materials and methods: This study verified the effects of a complementary treatment for KOTs and assessed the incidence of such complications as recurrence, infection, sequestrum formation, mandibular fracture, dehiscence, and neuropathy. Results: Twenty-two KOTs treated with Carnoys solution combined with peripheral ostectomy were included, and the follow-up period varied from 12 to 78 months with a mean of 42.9 months. Complications included recurrence (4.5%), dehiscence (22.7%), infection (4.5%), and paresthesia (18.2%). No difference was found among lesions associated (9.1%) or not (0%) with nevoid basal cell carcinoma syndrome (P > 0.05). Dehiscence was influenced by marsupialization (P < 0.05), and paresthesia was observed exclusively in cases of mandibular canal fenestration (P < 0.01). Conclusions: Complementary treatment with Carnoys solution and peripheral ostectomy appear to provide efficient treatment for KOTs. Complications originating from the use of the solution are less frequent and less serious than complications associated with cryotherapy. Neuropathy seems to be related to direct contact between the solution and the epineurium.

In situ effect of sodium fluoride or titanium tetrafluoride varnish and solution on carious demineralization of enamel

This study evaluated the effect of titanium tetrafluoride (TiF4) formulations on enamel carious demineralization in situ. Thirteen subjects took part in this cross-over, split-mouth, double-blind study performed in three phases of 14 d each. In each subject, two sound and two predemineralized specimens of bovine enamel were worn intra-orally and plaque accumulation was allowed. One sound and one predemineralized specimen in each subject was treated once with sodium fluoride (NaF) varnish or solution (Treatment A); TiF4 varnish or solution (Treatment B); or placebo varnish or no treatment (Treatment C). The initially sound enamel specimens were exposed to severe cariogenic challenge (20% sucrose, eight times daily for 5 min each time), whereas the predemineralized specimens were not. Eleven subjects were able to finish all experimental phases. The enamel alterations were quantified by surface hardness and transversal microradiography. Demineralization of previously sound enamel was reduced by all test formulations except for the NaF solution, while both TiF4 formulations were as effective as NaF varnish. For the predemineralized specimens, enamel surface hardness was increased only by TiF4 formulations, while subsurface mineral remineralization could not be seen in any group. Within the experimental protocol, TiF4 was able to decrease enamel demineralization to a similar degree as NaF varnish under severe cariogenic challenges, while only TiF4 formulations remineralized the enamel surface.

Evaluation of Chemical Treatment on Zirconia Surface with Two Primer Agents and an Alkaline Solution on Bond Strength

Objectives: This study evaluated the effect of an alkaline solution and two 10-methacryloyloxydecyl dihydrogen phosphate (MDP)-based primer agents on bond strength to zirconia (yttria-stabilized tetragonal zirconium polycrystal [Y-TZP]) through the shear bond strength (SBS) test. Materials and Methods: Sixty square-shaped Y-TZP samples were embedded in an acrylic resin mold, polished, and randomly assigned to one of six groups (n=10) according to treatment surface: group CR, no treatment (control); group NaOH, 0.5 M NaOH; group AP, Alloy Primer; group ZP, Z-Primer Plus; group NaOH-AP, 0.5 M NaOH + Alloy Primer; and group NaOH-ZP, 0.5 M NaOH + Z-Primer Plus. The resin cement (Rely X U100) was applied inside a matrix directly onto the Y-TZP surface, and it was light-cured for 40 seconds. The samples were stored in distilled water at 37 C for 24 hours prior to the test, which was performed in a universal machine at a crosshead-speed of 0.5 mm/min. The data were analyzed by one-way analysis of variance and Tukey tests (p<0.05). Light stereomicroscopy and scanning electron microscopy were used to assess the surface topography and failure mode. Results: The SBS was significantly affected by the chemical treatment (p<0.0001). The AP group displayed the best results, and the use of NaOH did not improve SBS results relative to either AP or ZP. The samples treated with Alloy Primer displayed mainly mixed failures, whereas those conditioned with Z-Primer Plus or with 0.5 M NaOH presented a balanced distribution of adhesive and mixed failure modes. Conclusions: The use of a NaOH solution may have modified the reactivity of the Y-TZP surface, whereas the employment of a MDP/6-4-vinylbenzyl-n-propyl amino-1,3,5-triazine2,4-dithione-based primer enhanced the Y-TZP bond strength.

Detorque evaluation of dental abutment screws after immersion in a fluoridated artificial saliva solution

Purpose: Implant-abutment connections still present failures in the oral cavity due to the loosening of mechanical integrity by detorque and corrosion of the abutment screws. The objective of this study was to evaluate the detorque of dental abutment screws before and after immersion in fluoridated solutions. Materials and Methods: Five commercial implant-abutment assemblies were assessed in this investigation: (C) Conex˜aoR , (E) EmfilsR , (I) INPR , (S) SINR , and (T) Titanium FixR . The implants were embedded in an acrylic resin and then placed in a holding device. The abutments were first connected to the implants and torqued to 20Ncmusing a handheld torque meter. The detorque values of the abutments were evaluated after 10 minutes. After applying a second torque of 20 Ncm, implant-abutment assemblies were withdrawn every 3 hours for 12 hours in a fluoridated solution over a period of 90 days. After that period, detorque of the abutments was examined. Scanning electronicmicroscopy (SEM) associated to energy dispersive spectroscopy (EDS) was applied to inspect the surfaces of abutments. Results: Detorque values of systems C, E, and I immersed in the fluoridated solution were significantly higher than those of the initial detorque. ANOVA demonstrated no significant differences in detorque values between designs S and T. Signs of localized corrosion could not be detected by SEM although chemical analysis by EDS showed the presence of elements involved in corrosive processes. Conclusion: An increase of detorque values recorded on abutments after immersion in fluoridated artificial saliva solutions was noticed in this study. Regarding chemical analysis, such an increase of detorque can result from a corrosion layer formed between metallic surfaces at static contact in the implant-abutment joint during immersion in the fluoridated solutions.

Pain and swelling after periapical surgery related to the hemostatic agent used: anesthetic solution with vasoconstrictor or aluminum chloride

To assess pain and swelling in the first 7 days after periapical surgery and their relationship with the agent used for bleeding control.

Effects of Carnoy's solution on blood vessels of the axillary fossa of rats

Carnoy's solution is applied to reduce the recurrence of odontogenic keratocysts and unicystic ameloblastomas. The deleterious action of this fixative on nerves has been studied but no attention has been paid to its effects on nearby vessels. The aim of this study was to investigate the effects of Carnoy's solution on blood vessels. The rat axillary artery and vein were surgically exposed, soaked with Carnoy's solution and kept in place for 2, 5 or 10 min, depending on the treatment group. The 5-min group was followed for 1, 2 and 3 weeks postoperatively. The vessels in the 2-min and 5-min exposure groups showed histological changes to the vessels, represented by focal loss of the endothelium and hyalinization of the wall. These alterations increased in the 10-min group. The vessels in the 3-week observation period revealed signs of recovery. It is concluded that Carnoy's solution can damage blood vessels but the process is reversible for exposure times less than 5 min.

Surgical treatment of canine nasal aspergillosis by rhinotomy combined with enilconazole infusion and oral itraconazole.

OBJECTIVES To evaluate the effectiveness of rhinotomy and surgical debridement associated with topical administration of 2 per cent enilconazole and oral itraconazole in dogs with severe or recurrent sinonasal aspergillosis. METHODS A standard rhinotomy was performed on seven dogs. In the initial study, the bone flap was left attached cranially and replaced at the end of the procedure. In the main study group, the bone flap was discarded. Nasal passages were debrided and irrigated with enilconazole solution for one hour. Oral itraconazole was administered to four dogs for one month postoperatively. Follow-up rhinoscopy was performed in all dogs. RESULTS All three dogs in the initial study had recurrence of the disease and two dogs had a second surgery to remove the flap. The main study group included four dogs in which the flap was initially removed, and the two dogs from the initial study that required a second surgery. At follow-up rhinoscopy, five dogs were free of aspergillus but had bacterial or inflammatory rhinitis and one dog had a small aspergilloma but was subsequently asymptomatic. Telephone follow-up revealed that four dogs were asymptomatic, one dog had intermittent sneezing and serous nasal discharge, and one dog had intermittent epistaxis. CLINICAL SIGNIFICANCE Rhinotomy with removal of the flap combined with one-hour infusion of 2 per cent enilconazole and oral itraconazole resulted in satisfactory outcome in dogs with severe or recurrent aspergillosis.

Safety and tolerability of slow-release oral morphine versus methadone in the treatment of opioid dependence

Opioid substitution treatment (OST) for opioid dependence may be limited by adverse events (AEs). Increasing the range of therapeutic options optimizes outcomes and facilitates patient management. An international, multi-center, two-phase study investigated the efficacy and safety of slow-release oral morphine (SROM) versus methadone in patients receiving methadone therapy for opioid dependence. In phase 1 (two way cross-over, 11 weeks each period) patients were randomized to SROM or methadone oral solution. In phase 2 (25 weeks), patients continued treatment with SROM (group A) or switched from methadone to SROM (group B). In total, 211 out of 276 completed phase 1 and 198 entered phase 2 (n = 95 group A, n = 103 group B). Treatment with both SROM and methadone was well tolerated. However, the mean QTc-interval associated with methadone was significantly longer than that under SROM. Higher treatment satisfaction, fewer cravings for heroin, and lower mental stress were reported with SROM. This study adds a significant further weight of evidence that SROM is an effective and well tolerated long-term maintenance treatment for opioid dependence with a beneficial risk profile compared to methadone regarding cardiac effects and supports its clinical utility.

El año de la primera campaña de vacunación oral contra la poliomielitis según la prensa de Santander (1963)

La poliomielitis emergió como una devastadora epidemia en los países desarrollados durante la primera mitad del siglo XX. Los hallazgos de una vacuna inactivada por Salk (1955) y otra atenuada por Sabin (1957) ofrecieron una solución para eliminarla, coincidiendo con el periodo de mayor incidencia de la enfermedad en España (1950-1963). La respuesta de las autoridades sanitarias españolas no se concretó hasta el año de 1963, cuando el Ministerio de Fomento organizó una campaña nacional de inmunización con vacuna inactivada. Estudios epidemiológicos realizados por investigadores de la Escuela Nacional de Sanidad llevaron al convencimiento de utilizar la vacuna atenuada y a un cambio de estrategia que originó en otoño del mismo año una nueva campaña nacional a cargo del Ministerio de la Gobernación. Este estudio de caso analiza la difusión mediática de ambas campañas en Santander, mediante una revisión de las noticias de prensa publicadas en 2 diarios de ámbito provincial.

A D-optimal designed population pharmacokinetic study of itraconazole capsules and solution in adults with cystic fibrosis

Background: Oral itraconazole (ITRA) is used for the treatment of allergic bronchopulmonary aspergillosis in patients with cystic fibrosis (CF) because of its antifungal activity against Aspergillus species. ITRA has an active hydroxy-metabolite (OH-ITRA) which has similar antifungal activity. ITRA is a highly lipophilic drug which is available in two different oral formulations, a capsule and an oral solution. It is reported that the oral solution has a 60% higher relative bioavailability. The influence of altered gastric physiology associated with CF on the pharmacokinetics (PK) of ITRA and its metabolite has not been previously evaluated. Objectives: 1) To estimate the population (pop) PK parameters for ITRA and its active metabolite OH-ITRA including relative bioavailability of the parent after administration of the parent by both capsule and solution and 2) to assess the performance of the optimal design. Methods: The study was a cross-over design in which 30 patients received the capsule on the first occasion and 3 days later the solution formulation. The design was constrained to have a maximum of 4 blood samples per occasion for estimation of the popPK of both ITRA and OH-ITRA. The sampling times for the population model were optimized previously using POPT v.2.0.[1] POPT is a series of applications that run under MATLAB and provide an evaluation of the information matrix for a nonlinear mixed effects model given a particular design. In addition it can be used to optimize the design based on evaluation of the determinant of the information matrix. The model details for the design were based on prior information obtained from the literature, which suggested that ITRA may have either linear or non-linear elimination. The optimal sampling times were evaluated to provide information for both competing models for the parent and metabolite and for both capsule and solution simultaneously. Blood samples were assayed by validated HPLC.[2] PopPK modelling was performed using FOCE with interaction under NONMEM, version 5 (level 1.1; GloboMax LLC, Hanover, MD, USA). The PK of ITRA and OH‑ITRA was modelled simultaneously using ADVAN 5. Subsequently three methods were assessed for modelling concentrations less than the LOD (limit of detection). These methods (corresponding to methods 5, 6 & 4 from Beal[3], respectively) were (a) where all values less than LOD were assigned to half of LOD, (b) where the closest missing value that is less than LOD was assigned to half the LOD and all previous (if during absorption) or subsequent (if during elimination) missing samples were deleted, and (c) where the contribution of the expectation of each missing concentration to the likelihood is estimated. The LOD was 0.04 mg/L. The final model evaluation was performed via bootstrap with re-sampling and a visual predictive check. The optimal design and the sampling windows of the study were evaluated for execution errors and for agreement between the observed and predicted standard errors. Dosing regimens were simulated for the capsules and the oral solution to assess their ability to achieve ITRA target trough concentration (Cmin,ss of 0.5-2 mg/L) or a combined Cmin,ss for ITRA and OH-ITRA above 1.5mg/L. Results and Discussion: A total of 241 blood samples were collected and analysed, 94% of them were taken within the defined optimal sampling windows, of which 31% where taken within 5 min of the exact optimal times. Forty six per cent of the ITRA values and 28% of the OH-ITRA values were below LOD. The entire profile after administration of the capsule for five patients was below LOD and therefore the data from this occasion was omitted from estimation. A 2-compartment model with 1st order absorption and elimination best described ITRA PK, with 1st order metabolism of the parent to OH-ITRA. For ITRA the clearance (ClItra/F) was 31.5 L/h; apparent volumes of central and peripheral compartments were 56.7 L and 2090 L, respectively. Absorption rate constants for capsule (kacap) and solution (kasol) were 0.0315 h-1 and 0.125 h-1, respectively. Comparative bioavailability of the capsule was 0.82. There was no evidence of nonlinearity in the popPK of ITRA. No screened covariate significantly improved the fit to the data. The results of the parameter estimates from the final model were comparable between the different methods for accounting for missing data, (M4,5,6)[3] and provided similar parameter estimates. The prospective application of an optimal design was found to be successful. Due to the sampling windows, most of the samples could be collected within the daily hospital routine, but still at times that were near optimal for estimating the popPK parameters. The final model was one of the potential competing models considered in the original design. The asymptotic standard errors provided by NONMEM for the final model and empirical values from bootstrap were similar in magnitude to those predicted from the Fisher Information matrix associated with the D-optimal design. Simulations from the final model showed that the current dosing regimen of 200 mg twice daily (bd) would provide a target Cmin,ss (0.5-2 mg/L) for only 35% of patients when administered as the solution and 31% when administered as capsules. The optimal dosing schedule was 500mg bd for both formulations. The target success for this dosing regimen was 87% for the solution with an NNT=4 compared to capsules. This means, for every 4 patients treated with the solution one additional patient will achieve a target success compared to capsule but at an additional cost of AUD $220 per day. The therapeutic target however is still doubtful and potential risks of these dosing schedules need to be assessed on an individual basis. Conclusion: A model was developed which described the popPK of ITRA and its main active metabolite OH-ITRA in adult CF after administration of both capsule and solution. The relative bioavailability of ITRA from the capsule was 82% that of the solution, but considerably more variable. To incorporate missing data, using the simple Beal method 5 (using half LOD for all samples below LOD) provided comparable results to the more complex but theoretically better Beal method 4 (integration method). The optimal sparse design performed well for estimation of model parameters and provided a good fit to the data.