Effects of litter manipulation in a tropical Eucalyptus plantation on leaching of mineral nutrients, dissolved organic nitrogen and dissolved organic carbon

Although many studies have shown that soil solution chemistry can be a reliable indicator of biogeochemical cycling in forest ecosystems, the effects of litter manipulations on the fluxes of dissolved elements in gravitational soil solutions have rarely been investigated. We estimated the fluxes of NH4-N, NO3-N, K, Ca, Mg, Na, Cl, dissolved organic nitrogen (DON) and dissolved organic carbon (DOC) over the first two years after re-planting Eucalyptus trees in the coastal area of Congo. Two treatments were replicated in two blocks after clear-cutting 7-year-old stands: in treatment R, all the litter above the mineral soil was removed before planting, and in a double slash (DS) treatment, the amount of harvest residues was doubled. The soil solutions were sampled down to a depth of 4 m and the water fluxes were estimated using the Hydrus 1D model parameterized from soil moisture measurements in 4 plots. Isotopic and spectroscopic analytical techniques were used to assess the changes in dissolved organic matter (DOM) properties throughout the transfer in the soil. The first year after planting, the fluxes of NH4-N, K, Ca, Mg, Na, Cl and DOC in the topsoil of the DS treatment were 2-5 times higher than in R, which showed that litter was a major source of dissolved nutrients. Nutrient fluxes in gravitational solutions decreased sharply in the second year after planting, irrespective of the soil depth, as a result of intense nutrient uptake by Eucalyptus trees. Losses of dissolved nutrients were noticeably low in these Eucalyptus plantations despite a low cation exchange capacity, a coarse soil texture and large amounts of harvest residues left on-site at the clear cut in the DS treatment. All together, these results clarified the strong effect of litter manipulation observed on eucalypt growth in Congolese sandy soils. DOM fluxes, as well as changes in delta C-13, C:N and aromaticity of DOM throughout the soil profile showed that the organic compounds produced in the litter layer were mainly consumed by microorganisms or retained in the topsoil. Below a depth of 15 cm, most of the DOC and the DON originated from the first 2 cm of the soil and the exchanges between soil solutions and soil organic matter were low. (C) 2014 Elsevier B.V. All rights reserved.

Fibrolytic enzyme production of Myceliophthora thermophila M.7.7. using inexpensive carbon sources and mineral nutrients

This study investigated the effect of inexpensive carbon and nitrogen sources on enzyme production by Myceliophthora thermophila M.7.7 in solid-state fermentation. Three kinds of lignocellulosic waste (corn straw, sugarcane bagasse and sugarcane straw) and six nitrogen sources (urea, calcium nitrate, analytical ammonium sulphate, yeast extract, agricultural fertilizer NPK 20-05-20 and fertilizing grade ammonium sulphate) were tested. Some physical-chermical parameters of the fermentation, such as temperature, initial pH and moisture content of the substrate on enzyme production, were evoluated. The maximum activities of xylanase (446.9 U/ml) endoglucanase (94.7 U/ml) and beta-glucosidase (2.8 U/ml) were observed in a mixture of corn straw and wheat bran (1:1 w/w) as the carbon source using fertilizer grade ammonium sulphate as the nitrogen source. This production occurred for an incubation period of 96 h, at 40°C, with initial moisture content of 70% and pH 5.0. These results have significant interest since they could be used for the future production of enzymes in a low-cost industrial process.

Phylogenetic variation in the shoot mineral concentration of angiosperms

The calcium (Ca) concentration of plant shoot tissues varies systematically between angiosperm orders. The phylogenetic variation in the shoot concentration of other mineral nutrients has not yet been described at an ordinal level. The aims of this study were (1) to quantify the shoot mineral concentration of different angiosperm orders, (2) to partition the phylogenetic variation in shoot mineral concentration between and within orders, (3) to determine if the shoot concentration of different minerals are correlated across angiosperm species, and (4) to compare experimental data with published ecological survey data on 81 species sampled from their natural habitats. Species, selected pro rata from different angiosperm orders, were grown in a hydroponic system under a constant external nutrient regime. Shoots of 117 species were sampled during vegetative growth. Significant variation in shoot carbon (C), calcium (Ca), potassium (K), and magnesium (Mg) concentration occurred between angiosperm orders. There was no evidence for systematic differences in shoot phosphorus (P) or organic-nitrogen (N) concentration between orders. At a species level, there were strong positive correlations between shoot Ca and Mg concentration, between shoot P and organic-N concentration, and between shoot K concentration and shoot fresh weight:dry weight ratio. Shoot C and cation concentration correlated negatively at a species level. Species within the Poales and the Caryophyllales had distinct shoot mineralogies in both the designed experiment and in the ecological survey.

Effect of liming on the mineral nutrition and yield of growing guava trees in a typic hapludox soil

High soil acidity influences the availability of mineral nutrients and increases that of toxic aluminium (Al), which has a jeopardizing effect on plant growth. The objective of this research was to evaluate the effects of soil liming on the development of guava (Psidium guajava L.) plants, on soil chemical characteristics, and on fruit yield. The experiment was carried out at the Bebedouro Citrus Experimental Station, state of São Paulo, Brazil, in a Typic Hapludox soil, from August 1999 to March 2003. The treatments consisted of limestone dose: D0 = zero; D1 = half dose; D2 = total dose; D3 = 1.5 times the dose, and D4 = 2 times the dose to raise the V value to 70%. The doses corresponded to zero, 1.85, 3.71, 5.56, and 7.41tha(-1) applied to the upper soil layer (0-30cm deep) before planting. The results showed that liming caused an improvement in the evaluated soil chemical characteristics up to a depth of 60cm in soil samples both in the line and between lines. The highest fruit yields were obtained when the base saturation reached a value of 55% in the line and 62% between the lines. Foliar levels of calcium (Ca) and magnesium (Mg) were 8.8 and 2.5gkg-1, respectively. The highest limestone dose maintained the soil base saturation (at the layer of 0-20cm) in the line close to 55% during at least 40 months after the incorporation of limestone.

Nutrients distribution in diseased coffee leaf tissue

Knowing the structure and distribution of nutrients in plant tissues can clarify some mechanisms of pathogen attack in plants and plant defense against infection, thus helping management strategies. The aim of this study was verify differences in distribution of mineral nutrients in coffee leaf tissues around foliar lesions of bacterial blight of coffee, blister spot, cercospora leaf, phoma leaf spot and coffee leaf rust. Fragments of leaf tissue surrounding the lesions were dehydrated in silica gel, carbon covered and subjected to X-ray microanalysis (MAX). Thirty-three chemical elements were detected in leaf tissue; however, there was variation in potassium and calcium contents surrounding the lesions. The highest potassium content was found in asymptomatic tissues surrounding the lesions, decreasing toward the transition zone and reaching minimum content in symptomatic tissues. The highest calcium content was found in symptomatic tissues, decreasing toward the transition zone and reaching minimum content in asymptomatic tissues. Therefore, MAX can be used to analyze the composition and distribution of nutrients in plant tissues and, if associated with mineral nutrition, it may help understand host-pathogen relationships and plant disease management.

Nutrição mineral e qualidade do fruto de algumas frutíferas tropicais: goiabeira, mangueira,bananeira e mamoeiro

Fruit quality is the result of the action of several factors, in particular the individual and combined effect of mineral nutrients. The proper evaluation of mineral nutritional requirements causes that fruit plants can express all their genetic potential. Thus, a research has been conducted in tropical fruit, for evaluating the influence of mineral nutrients on fruit quality; however, they appear dispersed. The objective of this review was to compile and report the effects of mineral nutrients on fruit quality of guava, mango, banana and papaya. Consequently, information about the influence of the essential elements in color, flavor, shape, size, appearance, penetration resistance, physiological disturbs disease incidence, physicochemical characteristics and lifetime of post - harvest fruit are presented.

Nutrição mineral e qualidade do fruto do abacaxizeiro e do maracujazeiro

Several factors influence the productivity and fruit quality of pineapple and passion fruit, among which are: climate, soil fertilization and irrigation practices. Mineral nutrition is essential to increase productivity and improve fruit quality; however, there is a few information about the effect of fertilization in these two fruit crops, especially under tropical conditions. The objective of this review was to compile the main research results, in which the influence of mineral nutrition on the fruit quality was evaluated. We considered the information recently published in scientific journals, and presented it for the macronutrients individually, then to NPK and, finally, the micronutrients. The review showed that it is difficult to say that some element favors or not certain characteristics of pineapple and passion fruit fruits, since the results are inconsistent and there is not many information. More than established the effects of mineral nutrients on the fruit quality of these two fruit crops, we stand out that research in this topic is very necessary.

Effects of rootstock and nitrogen fertiliser on postharvest anthracnose development in Hass avocado

These rootstock and nitrogen fertiliser studies confirmed that rootstock race can significantly affect the development of postharvest disease and mineral nutrient accumulation in Hass avocado fruit. When Hass (Guatemalan race) was grafted to seedling Velvick (West Indian race) rootstock, the severity and incidence of anthracnose in fruit were significantly reduced by up to 64 and 37%, respectively, compared with seedling Duke 6 (Mexican race) rootstock. Stem-end rot was also influenced by rootstock in some seasons, and significant reductions (up to 87%) in the severity and incidence of stem-end rot were recorded in Hass fruit from Velvick compared with Duke 6 rootstock trees. These improvements in postharvest diseases were associated with significantly lower concentrations of nitrogen and potassium, higher concentrations of calcium and magnesium, lower ratios of nitrogen:calcium and higher ratios of calcium + magnesium:potassium in Hass leaves and fruit from Velvick compared with Duke 6 rootstock trees. Altering the rate of nitrogen fertiliser had minimal impact on postharvest disease development. However, in one season, reducing the rate of nitrogen fertiliser to nil significantly reduced the concentration of nitrogen in the fruit skin, decreased the nitrogen:calcium ratio and significantly reduced the severity and incidence of anthracnose in Hass fruit from both Velvick and Duke 6 rootstock trees. The form of nitrogen fertiliser (ammonium compared with nitrate) applied to the trees did not significantly affect the postharvest disease susceptibility of Hass avocado fruit on either Velvick or Duke 6 rootstock. The Guatemalan race rootstocks, Anderson 8 and Anderson 10, were also found to be superior to the Mexican race rootstock, Parida 1, for reducing anthracnose severity. This again, was associated with a better balance of mineral nutrients (significantly lower nitrogen:calcium and higher calcium + magnesium:potassium ratios) in the fruit. This rootstock effect, however, was only observed in the first season of a 3-year experiment, possibly because of a better balance between vegetative growth and fruit production in Parida 1 in the latter two seasons. Significant positive correlations between anthracnose severity and fruit skin nitrogen:calcium ratios were evident across all experiments.

Effects of living crown reduction on needle element status of Scots pine

A wide range of biotic and abiotic factors, operating over different time perspectives and intensities, cause defoliation and a rapid decrease in the crown size of trees. Scleroderris canker disease [Gremmeniella abietina (Lagerb.) Morelet] has caused widespread crown reduction and tree mortality in Scots pine (Pinus sylvestris L) in forests in Scandinavia during the last three decades. In the 1980's, attempts were made to show, on the basis of the higher foliar N and S concentrations of affected pines in the diseased area, that sulphur and nitrogen deposition predispose trees to G. abietina. Unfortunately, in many studies on defoliated trees, exceptionally high or low needle mineral nutrient concentrations are still often interpreted as one of the causes of tree injury and not, conversely, as the result. In this thesis, three different field experiments, with foliar analysis as the main study method, were conducted in order to asses the possible long-term effects of living crown reduction on the needle nutrient concentrations of Scots pine trees in southern Finland. The crown ratio and length of the living crown were used to estimate the amount of defoliation in the reduced canopies. The material for the partial studies was collected and a total of 968 foliar samples were analysed individually (15-17 elements/sample) on a total of 488 sample trees (140 diseased, 116 pruned and 232 control trees) during the years 1987-1996 in 13 Scots pine stands. All the three experiments of this thesis provided significant evidence that severe, disease-induced defoliation or artificial pruning of the living branches can induce long-lasting nutritional changes in the foliage of the recovering trees under the typical growing conditions for Scots pine. The foliar concentrations of all the 17 mineral nutrients/elements analysed were affected, to a varying degree, by artificial pruning during the following three years. Although Scots pine, as an evergreen conifer, is considered to have low induced chemical responses to defoliation, this study proved experimentally under natural forest conditions that severe artificial pruning or disease-induced defoliation of Scots pine trees may induce biologically significant changes in the concentrations of most of the important macro- and micronutrients, as well as of carbon, in refoliated needles. Concerning the studies in this thesis, I find the results significant in providing new information about the long-term effects of rapid living crown reduction on the foliar nutrient and element status of Scots pine trees. Key words: Foliar analysis, defoliation, needle loss, pruning, nutrients, Pinus sylvestris, Gremmeniella abietina

不同N素形态对落叶松苗木根/土界面pH值及养分有效性的影响

The effect of different nitrogen and phosphorus sources on pH and the availability of mineral nutrients in the root/soil interface of Larix gmelinii seedlings were studied by means of root-mat method. The results showed that the addition of NH~+_4-N decreased the pH in the root/soil interface, while the addition of NO~-_3-N increased the pH in contrast with the control treatment. The sort of the P sources and the distance from the root plane remarkably influenced the changes of pH in the root/soil interface induced by the addition of the nitrogen sources. Compared with the addition of only NH~+_4-N, the extent to which the pH in the root/soil interface decreased was obviously smaller when treated by NH~+_4-N and rock P. When treated with different P sources, the contents of available P in the root/soil interface were affected by the sort of the N sources. When treated with soluble P, the contents of the available P in the root/soil interface obviously increased for the addition of both NH~+_4-N and NO~-_3-N. When treated with rock P, the contents of the available P increased only in the area 0～3 mm from the root plane for NH~+_4-N, whereas the contents of available P in the root/soil interface changed little for NO~-_3-N. The results above showed that the protons excreted by the roots were the main driving force for the solution of the rock P in the root/soil interface. The availability of Fe in the root/soil interface increased as a result of acidity induced by the NH~+_4-N, whereas the availability of Fe in the root/soil interface decreased because of the pH increase induced by the NO_3~-_N. The effect of different N sources on the availability of Fe in the root/soil interface was also affected by the sort of P sources. The concentrations of P、Fe in the leaves remarkably differed when treated by different N、P sources and concentrations of the P、Fe in the root/soil interface were correlated to those in the leaves of the seedlings.

Utilization of biodiesel-derived glycerol or xylose for increased growth and lipid production by indigenous microalgae

The use of industrial wastes rich in mineral nutrients and carbon sources to increase the final microalgal biomass and lipid yield at a low cost is an important strategy to make algal biofuel technology viable. Using strains from the microalgal collection of the Université de Montréal, this report shows for the first time that microalgal strains can be grown on xylose, the major carbon source found in wastewater streams from pulp and paper industries, with an increase in growth rate of 2.8 fold in comparison to photoautotrophic growth, reaching up to µ=1.1/day. On glycerol, growth rates reached as high as µ=1.52/day. Lipid productivity increased up to 370% on glycerol and 180% on xylose for the strain LB1H10, showing the suitability of this strain for further development for biofuels production through mixotrophic cultivation.

Characterization of microalgae native to Quebec for biofuel production.

La production de biodiésel par des microalgues est intéressante à plusieurs niveaux. Dans le premier chapitre, un éventail de pour et contres concernant l’utilisation de microalgues pour la production de biocarburant sont ici révisés. La culture d’algues peut s'effectuer en utilisant des terres non-arables, de l’eau non-potable et des nutriments de base. De plus, la biomasse produite par les algues est considérablement plus importante que celle de plantes vasculaires. Plusieurs espèces on le contenu lipidique en forme de triacylglycérols (TAGs), qui peut correspondre jusqu'à 30% - 40% du poids sec de la biomasse. Ces proportions sont considérablement plus élevées que celui des huiles contenues dans les graines actuellement utilisées pour le biodiésel de première génération. Par contre, une production pratique et peu couteuse de biocarburant par des microalgues requiert de surpasser plusieurs obstacles. Ceci inclut le développement de systèmes de culture efficace à faible coût, de techniques de récupération requérant peu d’énergie, et de méthodes d’extraction et de conversion de l’huile non-dommageables pour l’environnement et peu couteuses. Le deuxième chapitre explore l'une des questions importantes soulevées dans le premier chapitre: la sélection d'une souche pour la culture. Une collection de souches de microalgues d'eau douce indigène au Québec a été établi et examiné au niveau de la diversité physiologique. Cette collection est composée de cent souches, que apparaissaient très hétérogènes en terme de croissance lorsque mises en culture à 10±2 °C ou 22±2 °C sur un effluent secondaire d’une usine municipale de traitement des eaux usées (EU), défini comme milieu Bold's Basal Medium (BBM). Des diagrammes de dispersion ont été utilisés pour étudier la diversité physiologique au sein de la collection, montrant plusieurs résultats intéressants. Il y avait une dispersion appréciable dans les taux de croissance selon les différents types de milieux et indépendamment de la température. De manière intéressante, en considérant que tous les isolats avaient initialement été enrichis sur milieu BBM, la distribution était plutôt symétrique autour de la ligne d’iso-croissance, suggérant que l’enrichissement sur BBM n’a pas semblé biaiser la croissance des souches sur ce milieu par rapport aux EU. Également, considérant que les isolats avaient d’abord été enrichis à 22°C, il est assez surprenant que la distribution de taux de croissance spécifiques soit aussi symétrique autour de la ligne d’iso-croissance, avec grossièrement des nombres égaux d’isolats de part et d’autre. Ainsi, l’enrichissement à 22°C ne semble pas biaiser les cellules vers une croissance à cette température plutôt que vers 10°C. Les diagrammes de dispersion obtenus lorsque le pourcentage en lipides de cultures sur BBM ont été comparées à des cultures ayant poussé sur EU soit à 10°C ou 22°C rendent évident que la production de lipides est favorisée par la culture sur EU aux deux températures, et que la production lipidique ne semble pas particulièrement plus favorisée par l’une ou l’autre de ces températures. Lorsque la collection a été examinée pour y déceler des différences avec le site d’échantillonnage, une analyse statistique a montré grossièrement que le même degré de diversité physiologique était retrouvé dans les échantillons des deux différents sites. Le troisième chapitre a poursuivi l'évaluation de la culture d'algues au Québec. L’utilisation de déchets industriels riches en nutriments minéraux et en sources de carbone pour augmenter la biomasse finale en microalgues et le produit lipidique à faible coût est une stratégie importante pour rendre viable la technologie des biocarburants par les algues. Par l’utilisation de souches de la collection de microalgues de l’Université de Montréal, ce rapport montre pour la première fois que des souches de microalgues peuvent pousser en présence de xylose, la source de carbone majoritairement retrouvée dans les eaux usées provenant des usines de pâte et papier, avec une hausse du taux de croissance de 2,8 fois par rapport à la croissance photoautotrophe, atteignant jusqu’à µ=1,1/jour. En présence de glycérol, les taux de croissance atteignaient des valeurs aussi élevées que µ=1,52/jour. La production lipidique augmentait jusqu’à 370% en présence de glycérol et 180% avec le xylose pour la souche LB1H10, démontrant que cette souche est appropriée pour le développement ultérieur de biocarburants en culture mixotrophe. L'ajout de xylose en cultures d'algues a montré certains effets inattendus. Le quatrième chapitre de ce travail a porté à comprendre ces effets sur la croissance des microalgues et la production de lipides. Quatre souches sauvages indigènes ont été obersvées quotidiennement, avant et après l’ajout de xylose, par cytométrie en flux. Avec quelques souches de Chlorella, l’ajout de xylose induisait une hausse rapide de l’accumulation de lipide (jusqu’à 3,3 fois) pendant les premières six à douze heures. Aux temps subséquents, les cellules montraient une diminution du contenu en chlorophylle, de leur taille et de leur nombre. Par contre, l’unique membre de la famille des Scenedesmaceae avait la capacité de profiter de la présence de cette source de carbone sous culture mixotrophe ou hétérotrophe sans effet négatif apparent. Ces résultats suggèrent que le xylose puisse être utilisé avant la récolte afin de stimuler l’augmentation du contenu lipidique de la culture d’algues, soit en système de culture continu ou à deux étapes, permettant la biorestauration des eaux usées provenant de l’industrie des pâtes et papiers. Le cinquième chapitre aborde une autre déché industriel important: le dioxyde de carbone et les gaz à effet de serre. Plus de la moitié du dioxyde de carbone qui est émis dans l'atmosphère chaque jour est dégagé par un processus stationnaire, soit pour la production d’électricité ou pour la fabrication industrielle. La libération de CO2 par ces sources pourrait être atténuée grâce à la biorestauration avec microalgues, une matière première putative pour les biocarburants. Néanmoins, toutes les cheminées dégagent un gaz différent, et la sélection des souches d'algues est vitale. Ainsi, ce travail propose l'utilisation d’un état de site particulier pour la bioprospection de souches d'algues pour être utilisé dans le processus de biorestauration. Les résultats montrent que l'utilisation d'un processus d'enrichissement simple lors de l'étape d'isolement peut sélectionner des souches qui étaient en moyenne 43,2% mieux performantes dans la production de biomasse que les souches isolées par des méthodes traditionnelles. Les souches isolées dans ce travail étaient capables d'assimiler le dioxyde de carbone à un taux supérieur à la moyenne, comparées à des résultats récents de la littérature.