Protocolo de exame físico para a coluna toracolombar de equinos

Thoracolumbar injuries represent a challenge to the veterinarian that seeks to eliminate the pain, reinstitute the athletic use of the horse and minimize economic losses. The percentage of lost training days due to orthopedic conditions in race horses is of 72.1% and within those conditions is back pain, whicht represents from 4.35% to 20% of the lameness cases. The present study searched to establish a protocol based on score points for the thoracolumbar physical exam, by which it is able to determine the possible affected areas and the seriousness of the injuries. Along with the physical exam, it was performed an ultrasonographic exam of the thoracolumbar region to characterize and classify the injuries found, as to accompany its evolution after treatment. It was observed a clear reduction in the physical exam score sum in all animals between the exam days being that the exam of most of the animals presented a zero score at 60 days after the treatment. Relating the evolution of the clinical exam with the ultrasonography image tests, there was a positive association between the reduction score in the severity scale and the evolution of the ultrasonographic image of the evaluated structures. Thus, it can be concluded that gradation of the physical exam showed to be efficient and allowed the monitoring of the clinical evolution, as the answer of the injuries to the suggested treatment. Besides that, the results showed that 60 days is the ideal time for the first reevaluation of the animal after the treatment.

Corn yield with reduction of insecticidal sprayings against fall armyworm Spodoptera frugiperda (Lepidoptera: Noctuidae)

The ideal time is more important than amount of insecticidal spraying to adequate the control of Spodoptera frugiperda J.E. Smith (Lepidoptera: Noctuidae) in corn. This study aimed to evaluate lufenuron sequential sprayings effect and its rotation with other active ingredients on the population, damage caused by S. frugiperda and the impact on corn yield. The experiment was carried out in the field with six treatments: (1) one lufenuron spraying, (2) two lufenuron sprayings, (3) three lufenuron sprayings (4) four lufenuron sprayings, (5) sprayings with spinosad, lufenuron, thiamethoxam+lambdacyhalothrin and deltamethrin (in sequence, at ten days intervals) (6) control treatment. Sprayings started twenty days after the seedling had emerged and then every ten days for a maximum of four sprays. Both caterpillar population (20.9-21.7 larvae/plot) and index of damage (1.2-1.7) observed in corn plants were significantly lower in treated plots compared to control (untreated) (31.7 larvae/plot and index of damage 2.7), regardless of spraying amount. The results showed that multiple insecticide applications to control S. frugiperda do not guarantee higher yields in corn, ranging from 6375.2 to 7650.1 kg ha -1. Only one spraying of lufenuron was enough to prevent significant reduction in corn yield (6749.9 kg ha -1). © 2012 Asian Network for Scientific Information.

Análise microscópica e morfométrica do efeito da própolis usada como meio de conservação para dentes de ratos avulsionados

Pós-graduação em Odontologia - FOA

Influência do tempo e da temperatura de estocagem de amostras de sangue nas variáveis hematológicas de cães portadores de enfermidade renal crônica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Storage of 'Espada' mango fruits in modified atmosphere and cooling: effects on conservation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sistema de avaliação e tratamento da coluna lombar com o uso de tração mecânica

Pós-graduação em Engenharia Mecânica - FEG

Caracterização dos biofilmes de dermatófitos e desenvolvimento de protótipos anti-dermatófitos nas formas planctônica e biofilme

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Funktionalisierte Latexpartikel

In der vorliegenden Arbeit wurden unter Verwendung neuer auf der Isophthalsäure basieren-der polymerisierbaren Tensiden carboxylfunktionalisierte Latexpartikel hergestellt, charakte-risiert und funktionalisiert. Im ersten Teil dieser Arbeit wurden 5-(10-Undecenyloxy)isophthalsäure (ISA-Vinyl), 5-(11-(4-Vinylphenoxy)undecyloxy)isophthal-säure (ISA-Sty), 5-(11-(2-Prop-1-enyl)phenoxy)undecyloxy)isophthalsäure (ISA-Pr), 5-(11-(1-Methacryloxy)undecylen)isophthalsäure (ISA-Met) und 5-(10-(3-Methylbut-3-enyl)oxy-1-oxydecylen)isophthalsäure (ISA-Bu) hergestellt. Die Surfmere wurden mit Styrol bzw. mit n-Butylacrylat copolymerisiert. ISA-Bu und ISA-Pr weisen während der Copolymerisation mit Styrol fast ideale Verläufe der Zeit/Umsatz-Kurven auf. Bei der Copolymerisation von ISA-Bu bzw. ISA-Vinyl mit n-Butylmethacrylat wurden ähnliche Ergebnisse erhalten. Die Carboxylgruppen an der Partikeloberfläche wurden mit Halogenderivaten verestert oder mit primären Aminen amidiert. Die funktionalisierten Partikel wurden mit der Polyelektrolyt-titration und konduktometrischen Titration, der IR- und UV-Spektroskopie, der Transmissi-onselektronenmikroskopie, der Fluoreszenzkorrelationsspektroskopie charakterisiert. Es konnte gezeigt werden, dass die Reaktanden kovalent an der Partikeloberfläche gebunden sind. Die Polymerpartikel wurden bei der Herstellung von Immunoassays genutzt. Die Adsorpti-onsisothermen zeigten, dass eine hohe Menge an Rinderserumalbumin an die Partikeloberflä-che physikalisch gebunden werden kann. In dieser Arbeit wurde ein einfaches Immunoassay hergestellt mit Biotin – Avidin als Modellsystem hergestellt. Die Surfmere wurden zur Stabilisierung von Miniemulsionen für die Miniemulsionspolymeri-sation genutzt. Im Laufe dieser Arbeit konnten mit dieser Methode Rylenfarbstoffe in Po-lystyrolpartikel stabilisiert werden.

Constructing correlated spin states with neutral atoms in optical lattices

This thesis reports on the experimental investigation of controlled spin dependent interactions in a sample of ultracold Rubidium atoms trapped in a periodic optical potential. In such a situation, the most basic interaction between only two atoms at one common potential well, forming a micro laboratory for this atom pair, can be investigated. Spin dependent interactions between the atoms can lead to an intriguing time evolution of the system. In this work, we present two examples of such spin interaction induced dynamics. First, we have been able to observe and control a coherent spin changing interaction. Second, we have achieved to examine and manipulate an interaction induced time evolution of the relative phase of a spin 1/2-system, both in the case of particle pairs and in the more general case of N interacting particles. The first part of this thesis elucidates the spin-changing interaction mechanism underlying many fascinating effects resulting from interacting spins at ultracold temperatures. This process changes the spin states of two colliding particles, while preserving total magnetization. If initial and final states have almost equal energy, this process is resonant and leads to large amplitude oscillations between different spin states. The measured coupling parameters of such a process allow to precisely infer atomic scattering length differences, that e.g. determine the nature of the magnetic ground state of the hyperfine states in Rubidium. Moreover, a method to tune the spin oscillations at will based on the AC-Zeeman effect has been implemented. This allowed us to use resonant spin changing collisions as a quantitative and non-destructive particle pair probe in the optical lattice. This led to a series of experiments shedding light on the Bosonic superfluid to Mott insulator transition. In a second series of experiments we have been able to coherently manipulate the interaction induced time evolution of the relative phase in an ensemble of spin 1/2-systems. For two particles, interactions can lead to an entanglement oscillation of the particle pair. For the general case of N interacting particles, the ideal time evolution leads to the creation of spin squeezed states and even Schrödinger cat states. In the experiment we have been able to control the underlying interactions by a Feshbach resonance. For particle pairs we could directly observe the entanglement oscillations. For the many particle case we have been able to observe and reverse the interaction induced dispersion of the relative phase. The presented results demonstrate how correlated spin states can be engineered through control of atomic interactions. Moreover, the results point towards the possibility to simulate quantum magnetism phenomena with ultracold atoms in optical traps, and to realize and analyze many novel quantum spin states which have not been experimentally realized so far.

Immediate and delayed transplantation of mesenchymal stem cells improve muscle force after skeletal muscle injury in rats

Mesenchymal stem cell (MSC) therapy is a promising approach for regaining muscle function after trauma. Prior to clinical application, the ideal time of transplantation has to be determined. We investigated the effects of immediate and delayed transplantation. Sprague-Dawley rats received a crush trauma to the left soleus muscle. Treatment groups were transplanted locally with 2 × 10(6) autologous MSCs, either immediately or 7 days after trauma. Saline was used as sham therapy. Contraction force tests and histological analyses were performed 4 weeks after injury. GFP-labelled MSCs were followed after transplantation. The traumatized soleus muscles of the sham group displayed a reduction of twitch forces to 36 ± 17% and of tetanic forces to 29 ± 11% of the non-injured right control side, respectively. Delayed MSC transplantation resulted in a significant improvement of contraction maxima in both stimulation modes (twitch, p = 0.011; tetany, p = 0.014). Immediate transplantation showed a significant increase in twitch forces to 59 ± 17% (p = 0.043). There was no significant difference in contraction forces between muscles treated by immediate and delayed cell transplantation. We were able to identify MSCs in the interstitium of the injured muscles up to 4 weeks after transplantation. Despite the fundamental differences of the local environment, which MSCs encounter after transplantation, similar results could be obtained with respect to functional muscle regeneration. We believe that transplanted MSCs residing in the interstitial compartment evolve their regenerative capabilities through paracrine pathways. Our data suggest a large time window of the therapeutical measures.

Therapeutic drug monitoring of once daily aminoglycoside dosing: comparison of two methods and investigation of the optimal blood sampling strategy.

PURPOSE Therapeutic drug monitoring of patients receiving once daily aminoglycoside therapy can be performed using pharmacokinetic (PK) formulas or Bayesian calculations. While these methods produced comparable results, their performance has never been checked against full PK profiles. We performed a PK study in order to compare both methods and to determine the best time-points to estimate AUC0-24 and peak concentrations (C max). METHODS We obtained full PK profiles in 14 patients receiving a once daily aminoglycoside therapy. PK parameters were calculated with PKSolver using non-compartmental methods. The calculated PK parameters were then compared with parameters estimated using an algorithm based on two serum concentrations (two-point method) or the software TCIWorks (Bayesian method). RESULTS For tobramycin and gentamicin, AUC0-24 and C max could be reliably estimated using a first serum concentration obtained at 1 h and a second one between 8 and 10 h after start of the infusion. The two-point and the Bayesian method produced similar results. For amikacin, AUC0-24 could reliably be estimated by both methods. C max was underestimated by 10-20% by the two-point method and by up to 30% with a large variation by the Bayesian method. CONCLUSIONS The ideal time-points for therapeutic drug monitoring of once daily administered aminoglycosides are 1 h after start of a 30-min infusion for the first time-point and 8-10 h after start of the infusion for the second time-point. Duration of the infusion and accurate registration of the time-points of blood drawing are essential for obtaining precise predictions.

Viabilidade do biodiesel de microalgas: otimização de técnicas de extração

Os problemas relacionados com o consumo energético e as emissões de poluentes relativas ao setor dos transportes representam seguramente a maior preocupação ao nível Europeu no que respeita aos gases com efeito de estufa e à poluição atmosférica. Uma das formas de resolver/minimizar estes problemas é através da aposta em combustíveis alternativos. Em particular, os biocombustíveis poderão ser uma alternativa interessante aos combustíveis convencionais. As microalgas, como matéria-prima para produção de biodiesel, apresentam-se com excelentes perspetivas de futuro e com vantagens competitivas no campo das energias renováveis. É nesta perspetiva que se enquadra o presente trabalho, cujos objetivos consistiram na extração de biodiesel a partir de microalgas secas (Nannochloropsis gaditana e Scenedesmus sp.) e na otimização das respetivas técnicas de extração lipídica. Verificou-se que, em função dos métodos e condições utilizadas, a espécie Nannochloropsis gaditana apresenta um potencial de produção de biodiesel superior à espécie Scenedesmus sp. (eficiências de extração de 24,6 (wt.%) e 9,4 (wt.%) respetivamente). Um método de rotura celular conjugado com o processo de extração lipídica via solvente orgânico é essencial, pois conseguiu-se um acréscimo de 42% no rendimento de extração, sendo 10 minutos o tempo ideal de operação. Solventes como o metanol e sistema de solventes diclorometano/metanol mostraram ser mais eficazes quando se pretende extrair lípidos de microalgas, com valores de eficiência de remoção de 30,9 (wt.%) e 23,2 (wt.%) respetivamente. De forma a valorizar os resultados obtidos no processo de extração recorreu-se à sua conversão em biodiesel através da transesterificação catalítica ácida, onde se obteve uma eficiência de conversão de 17,8 (wt.%) para a espécie Nannochloropsis gaditana.

Preventing weed spread: a survey of lifestyle and commercial landholders about Nassella trichotoma in the Northern Tablelands of New South Wales, Australia

Nassella trichotoma (Nees) Hack. ex Arechav. (common name, serrated tussock) occupies large areas of south-eastern Australia and has considerable scope for expansion in the Northern Tablelands of New South Wales. This highly invasive grass reduces pasture productivity and has the potential to severely affect the region’s economy by decreasing the livestock carrying capacity of grazing land. Other potential consequences of this invasion include increased fuel loads and displacement of native plants, thereby threatening biodiversity. Rural property owners in the Northern Tablelands were sent a mail questionnaire that examined use of measures to prevent new outbreaks of the weed. The questionnaire was sent to professional farmers as well as lifestyle farmers (owners of rural residential blocks and hobby farms) and 271 responses were obtained (a response rate of 18%). Key findings were respondents’ limited capacity to detect N. trichotoma, and low adoption of precautions to control seed spread by livestock, vehicles and machinery. This was particularly the case among lifestyle farmers. There have been considerable recent changes to biosecurity governance arrangements in New South Wales, and now is an ideal time for regulators and information providers to consider how to foster regional communities’ engagement in biosecurity, including the adoption of measures that have the capacity to curtail the spread of N. trichotoma.

Enraizamento de estacas de Camellia sinensis L. em função da época de coleta de ramos, genótipos e ácido indolbutírico

Objetivou-se avaliar o efeito da época de coleta de ramos, genótipo e concentração de ácido indolbutírico (AIB) no enraizamento de estacas de Camellia sinensis L. Para tal, foram coletados ramos dos genótipos IAC 259, F 15 e Comum, em Pariquera-Açu, SP, Brasil, no inverno, primavera, verão e outono. em seguida, foram preparadas estacas que foram tratadas com AIB (0, 2.000, 4.000, 6.000 e 8.000 e 10.000mg L-1), plantadas em vermiculita e mantidas em viveiro sob 70% de sombreamento e irrigação periódica. O delineamento experimental foi o inteiramente casualizado, em esquema fatorial 4x3x6 (quatro épocas, três genótipos e seis concentrações de AIB), com quatro repetições de oito estacas. A época ideal para se coletar os ramos foi o inverno. Estacas coletadas no inverno apresentaram mortalidade média de 41%, enquanto nas estacas vivas o enraizamento médio foi de 66%, influenciado apenas pelo genótipo, todas apresentaram brotações e apenas 32% apresentaram calos. O AIB influenciou o número e o comprimento das raízes formadas em estacas no inverno. Na primavera, apesar da menor mortalidade (31%), apenas 0,34% das estacas vivas apresentaram raiz e 49% brotação, enquanto 97% das estacas apresentaram calo. No verão e outono a mortalidade das estacas foi extremamente alta, respectivamente, 93 e 81% das estacas.

Desenvolvimento de uma Metodologia para a Seletividade cinética aplicada ao processo de hidroconversão do petróleo, ocorrendo em reator gás-líquido

Este trabalho tem como objetivo desenvolver uma metodologia de seletividade cinética, para os pseudocomponentes do petróleo em escoamento gás-liquido em colunas de bolhas usando a Fluidodinâmica Computacional (CFD). Uma geometria cilíndrica de 2,5m de altura e 0,162m de diâmetro foi usada tanto na validação fluidodinâmica com base em dados experimentais da literatura, como na análise cinética do reator operando em dois modos distintos em relação a fase líquida: batelada e contínuo. Todos os casos de estudo operam em regime heterogêneo de escoamento, com velocidade superficial do gás igual a 8 cm/s e diâmetro médio de bolhas de 6 mm. O modelo fluidodinâmico validado apresentou boa concordância com os dados experimentais, sendo empregado como base para a implementação do modelo cinético de rede de Krishna e Saxena (1989). A análise da hidroconversão foi realizada a 371ºC, e os resultados mostraram o comportamento esperado para o processo reativo estudado, definindo-se os tempos (batelada) e posições axiais (contínuo) de coleta ideal para os pseudocomponentes leves. Em síntese, ressaltase o uso da ferramenta CFD no entendimento, desenvolvimento e otimização de processos.