Management factors affecting mortality, feed intake, and feed conversion ratio of grow-finishing pigs

The aim of this study was to determine the effect of animal management and farm facilities on total feed intake (TFI), feed conversion ratio (FCR) and mortality rate (MORT) of grower-finishing pigs. In total, 310 batches from 244 grower-finishing farms, consisting of 454 855 Pietrain sired pigs in six Spanish pig companies were used. Data collection consisted of a survey on management practices (season of placement, split-sex by pens, number of pig origins, water source in the farm, initial or final BW) and facilities (floor, feeder, ventilation or number of animals placed) during 2008 and 2009. Results indicated that batches of pigs placed between January and March had higher TFI (P=0.006), FCR (P=0.005) and MORT (P=0.03) than those placed between July and September. Moreover, batches of pigs placed between April and June had lower MORT (P=0.003) than those placed between January and March. Batches which had split-sex pens had lower TFI (P=0.001) and better FCR (P<0.001) than those with mixed-sex in pens; pigs fed with a single-space feeder with incorporated drinker also had the lowest TFI (P<0.001) and best FCR (P<0.001) in comparison to single and multi-space feeders without a drinker. Pigs placed in pens with <50% slatted floors presented an improvement in FCR (P<0.05) than pens with 50% or more slatted floors. Batches filled with pigs from multiple origins had higher MORT (P<0.001) than those from a single origin. Pigs housed in barns that performed manual ventilation control presented higher MORT (P<0.001) in comparison to automatic ventilation. The regression analysis also indicated that pigs which entered to grower-finisher facilities with higher initial BW had lower MORT (P<0.05) and finally pigs which were sent to slaughterhouse with a higher final BW presented higher TFI (P<0.001). The variables selected for each dependent variable explained 61.9%, 24.8% and 20.4% of the total variability for TFI, FCR and MORT, respectively. This study indicates that farms can increase growth performance and reduce mortality by improving farm facilities and/or modifying management practices.

Genetic improvement of feed conversion ratio via indirect selection against lipid deposition in farmed rainbow trout (Oncorhynchus mykiss Walbaum)

The research leading to these results has received funding from the European Union's Seventh Framework Programme (KBBE.2013.1.2-10) under grant agreement n° 613611 FISHBOOST. Moreover, the original data collection was supported by the European Union, Project PROGRESS Q5RS-2001-00994. The staff at Tervo station, Ossi Ritola and Tuija Paananen, are highly acknowledged for fish management. A. Ka., A. Ki., S. M., D. H. and K. R. designed research and wrote the paper; A.Ka analyzed the data and had primary responsibility for the final content. All authors have read and approved the manuscript. The authors declare no conflicts of interest.

Growth response, feed conversion rate and cost benefits of hybrid catfish fed maggot meal based diets in outdoor tanks

The growth response, feed conversion ratio and cost benefits of hybrid catfish, Heterobranchus longifilis x Clarias gariepinus fed five maggot meal based diets were evaluated for 56 days in outdoor concrete tanks. Twenty-five fingerlings of the hybrid fish were stocked in ten outdoor concrete tanks of dimension 1.2mx0.13mx0.18m and code MM sub(1)-MM sub(5) in relation to their diet name. Five isonitrogenous and isocaloric maggot meal based diets namely MM sub(1)-0% maggot meal, MM sub(2)-25% maggot meal, MM sub(3)-50% maggot meal, MM sub(4-)75% maggot meal and MM sub(5-) 100% maggot meal were used for the experiment. The higher the proportion of maggot in the meal, the higher the ether extract and crude fiber. No significance difference P>0.05 exists between ash content of the experimental diets. Diet MM sub(2) had the best growth performance and highest MGR with a significant difference P<0.05 with other diets fed fish. No significance differences P>0.05 exists between the growth parameters for diets MM sub(1), MM sub(3), and MM sub(4). A positive correlation (r=1.0) exists (P<0.05, 0.25) between the growth parameters for the different experimental diets. Highest correlation r super(2)=0.9981 exists P<0.05 between MGR within the treatments. However, there no significant (P>0.05) difference in expenditure but there is between the profit indices and incidence of cost between the trials. MM sub(2) has the best yield cost and net profit. Without any reservation, inclusion of maggot based meal diet is recommended as feed of hybrid catfish to 75% inclusion for growth and profit incidence

Feed conversion, protein efficiency, digestibility and growth performance of Oreochromis niloticus fed Delonix regia seed meal

Oreochromis niloticus fingerlings (mean weight 5.27~c0.29g) were fed raw and boiled Delonix regia seed meals following standard procedures. The weight gain, specific growth rate (SGR), feed conversion ratio (FCR), protein efficiency ratio (PER), net protein utilization (NPU) were determined as growth indices. Diet formulated with seed boiled for 80 minutes showed significantly (P<0.05) high values for the growth indices. Carcass nutrients composition were significantly (P<0.05) higher than in the control (raw) diet. Delonix regia seed meal when boiled has high potential of being utilized efficiently by O.niloticus. The implications of the respective index in fish metabolism are discussed

Intestinal microbiota associated with differential feed conversion efficiency in chickens

Analysis of model systems, for example in mice, has shown that the microbiota in the gastrointestinal tract can play an important role in the efficiency of energy extraction from diets. The study reported here aimed to determine whether there are correlations between gastrointestinal tract microbiota population structure and energy use in chickens. Efficiency in converting food into muscle mass has a significant impact on the intensive animal production industries, where feed represents the major portion of production costs. Despite extensive breeding and selection efforts, there are still large differences in the growth performance of animals fed identical diets and reared under the same conditions. Variability in growth performance presents management difficulties and causes economic loss. An understanding of possible microbiota drivers of these differences has potentially important benefits for industry. In this study, differences in cecal and jejunal microbiota between broiler chickens with extreme feed conversion capabilities were analysed in order to identify candidate bacteria that may influence growth performance. The jejunal microbiota was largely dominated by lactobacilli (over 99% of jejunal sequences) and showed no difference between the birds with high and low feed conversion ratios. The cecal microbial community displayed higher diversity, and 24 unclassified bacterial species were found to be significantly (<0.05) differentially abundant between high and low performing birds. Such differentially abundant bacteria represent target populations that could potentially be modified with prebiotics and probiotics in order to improve animal growth performance.

Potentials of castor seed meal (Ricinus communis L.) as feed ingredient for Oreochromis niloticus

The potentials of castor seed (Ricinus communis) meal as feed ingredient for Oreochromis niloticus was determined by using boiled seeds to prepare five diets which were fed to the fish species. The effects of the experimental diets on the weight gain, specific growth rate, feed conversion ratio, protein efficiency ratio, apparent net protein utilization, digestibility and carcass composition were investigated. The best of these growth factors were obtained with feed formulated from R. communis seeds boiled for 50 and 65 minutes. The highest carcass protein content was observed with fish fed with 65 minute-boiled seeds

Application of ipil- ipil leaf meal (IILM) as feed Ingredient for Monosex tilapia fry (oreochronis niioticus) : In terms of growth and economics

The Ipil-ipil (Leucaena leucocephal) leaf analyzed for crude protein (CP), fat, crude fibre (CF), ash content, moisture content and nitrogen free extract (NFE). The CP 23± 0.12 % , fat 8 ± 0.11 %, CF 18 ± 0.15 % , ash 10 ± 0.13 %, moisture 14. ± .16% and NFE 29.± 1.10 % were recorded. A twenty one days experiment was conduced to assess the response of juvenile monosex tilapia with different iso-nitrogenous formulated diets for find out the feasibility study of using ipil-ipil leaf meals as feed ingredient for juvenile tilapia. Three experimental diets were formulated by using fish meal, soybean meal, rice bran and ipil ipil leaf meal. One control diet was formulated by using fish meal, soybean meal and rice bran. Considering the high demand, limited availability of fish meal and soybean meal, ipil ipil leaf meal was incorporated in juvenile tilapia feed. Among plant protein ingredients ipil ipil leaf meal was considered as the most nutritive plant protein source after soybean meal. However, high concentration of toxic element limited the incorporation level of ipil ipil leaf meal in fish feed. Use of 15 % ipil ipil leaf meal in fish feed was more significant from the view of growth performance and economics. The higher Absolute Growth was 1119.26 gm, higher Specific Growth Rate was 6.52% /day higher Feed Conversion Efficiency was 41.23% , higher Protein Efficiency Ratio was 1.178 and higher Average Daily Growth rate was 14.00% recorded in diet-4 ( which contained 15% IILM). The lower Feed Conversion Ratio 2.42 and lower cost for per unit production 34.65 taka/kg were recorded in diet-4. The higher cost for per unit fish production 45.6 tk./kg was recorded for diet-1 where no ipil ipil leaf meal.. The results suggest that tree legumes Ipil-ipil (Leucaena leucocephal) leaf has potential and excellent source of feed ingredients as protein supplements for juvenile monosex

Dietary protein and energy interations: an approach to optimizing dietary protein to energy ratio in walking catfish, Clarias batrachus

An 8 weeks feeding trial was conducted in a static indoor rearing system to investigate protein to energy ratio (PIE ratio) in walking catfish Clarias batrachus. Six fishmeal based diets of two protein levels (25 and 35%), each with three lipid levels (5, 10 and 15%) resulted in P/E ratios ranging from 13.57 to 21.97 mg protein kJˉ¹ gross energy (GE) were fed to 50 fish in triplicate. Fish were fed 6% of their body weight three times per day adjusted fortnightly. Significantly higher (p<0.05) growth rates in terms of weight gain, % weight gain and specific growth rate (SGR) were evident in fish fed with higher protein diet. The highest growth rate was found by fish fed 35% protein, 17.06 kJˉ¹GE with a P/E ratio of 20.55 mg protein kJˉ¹GE. Significantly better (p<0.05) feed conversion ratio (FCR) was also evident in fish fed with higher protein diet and best FCR was found by fish fed 35% protein, 10% lipid, 17.06 kJˉ¹GE with a P/E ratio of 20.55 mg protein kJˉ¹GE. Significantly indifferent (p>0.05) values of protein utilisation were found in between the both (higher and lower) protein diets. Higher lipid deposition (p<0.05) in whole body was observed with increasing dietary lipid level at each protein diet and as higher (p<0.05) for the lower protein diets. The study reveals that C. batrachus performed best the diet containing 35%, 17.06 kJ gˉ¹ and 20.55 mg protein kJ gˉ¹ GE protein, gross energy and P/E ratio respectively.

Flexible conversion ratio fast reactors: Overview

Conceptual designs of lead-cooled and liquid salt-cooled fast flexible conversion ratio reactors were developed. The performance achievable by the unity conversion ratio cores of these reactors was compared to an existing supercritical carbon dioxide-cooled (S-CO2) fast reactor design and an uprated version of an existing sodium-cooled fast reactor. All concepts have cores rated at 2400 MWt. The cores of the liquid-cooled reactors are placed in a large-pool-type vessel with dual-free level, which also contains four intermediate heat exchangers (IHXs) coupling a primary coolant to a compact and efficient supercritical CO2 Brayton cycle power conversion system. The S-CO2 reactor is directly coupled to the S-CO2 Brayton cycle power conversion system. Decay heat is removed passively using an enhanced reactor vessel auxiliary cooling system (RVACS) and a passive secondary auxiliary cooling system (PSACS). The selection of the water-cooled versus air-cooled heat sink for the PSACS as well as the analysis of the probability that the PSACS may fail to complete its mission was performed using risk-informed methodology. In addition to these features, all reactors were designed to be self-controllable. Further, the liquid-cooled reactors utilized common passive decay heat removal systems whereas the S-CO2 uses reliable battery powered blowers for post-LOCA decay heat removal to provide flow in well defined regimes and to accommodate inadvertent bypass flows. The multiple design limits and challenges which constrained the execution of the four fast reactor concepts are elaborated. These include principally neutronics and materials challenges. The neutronic challenges are the large positive coolant reactivity feedback, small fuel temperature coefficient, small effective delayed neutron fraction, large reactivity swing and the transition between different conversion ratio cores. The burnup, temperature and fluence constraints on fuels, cladding and vessel materials are elaborated for three categories of material - materials currently available, available on a relatively short time scale and available only with significant development effort. The selected fuels are the metallic U-TRU-Zr (10% Zr) for unity conversion ratio and TRU-Zr (75% Zr) for zero conversion ratio. The principal selected cladding and vessel materials are HT-9 and A533 or A508, respectively, for current availability, T-91 and 9Cr-1Mo steel for relatively short-term availability and oxide dispersion strengthened ferritic steel (ODS) available only with significant development. © 2009 Elsevier B.V. All rights reserved.

Flexible conversion ratio lead cooled reactor design

This paper presents the neutronic design of a lead cooled fast reactor with flexible conversion ratio. The main objective of the design is to accommodate interchangeably within the same reactor core a wide range of transuranic actinides management strategies: from pure burning to self-sustainable breeding. Two, the most limiting, core design options with unity and zero conversion ratios are described. Neutronic feasibility of both designs was demonstrated through calculation of reactivity control and fuel loading requirements, fluence limits, power peaking factors, and reactivity feedback coefficients.

Liquid salt cooled flexible conversion ratio fast reactor: Neutronic design

This paper presents the neutronic design of a liquid salt cooled fast reactor with flexible conversion ratio. The main objective of the design is to accommodate interchangeably within the same reactor core alternative transuranic actinides management strategies ranging from pure burning to self-sustainable breeding. Two, the most limiting, core design options with unity and zero conversion ratios are described. Ternary, NaCl-KCl-MgCl2 salt was chosen as a coolant after a rigorous screening process, due to a combination of favourable neutronic and heat transport properties. Large positive coolant temperature reactivity coefficient was identified as the most significant design challenge. A wide range of strategies aiming at the reduction of the coolant temperature coefficient to assure self-controllability of the core in the most limiting unprotected accidents were explored. However, none of the strategies resulted in sufficient reduction of the coolant temperature coefficient without significantly compromising the core performance characteristics such as power density or cycle length. Therefore, reactivity control devices known as lithium thermal expansion modules were employed instead. This allowed achieving all the design goals for both zero and unity conversion ratio cores. The neutronic feasibility of both designs was demonstrated through calculation of reactivity control and fuel loading requirements, fluence limits, power peaking factors, and reactivity feedback coefficients. © 2009 Elsevier B.V. All rights reserved.