Impaction of spray droplets on leaves: Influence of formulation and leaf character on shatter, bounce and adhesion

This paper combines experimental data with simple mathematical models to investigate the influence of spray formulation type and leaf character (wettability) on shatter, bounce and adhesion of droplets impacting with cotton, rice and wheat leaves. Impaction criteria that allow for different angles of the leaf surface and the droplet impact trajectory are presented; their predictions are based on whether combinations of droplet size and velocity lie above or below bounce and shatter boundaries. In the experimental component, real leaves are used, with all their inherent natural variability. Further, commercial agricultural spray nozzles are employed, resulting in a range of droplet characteristics. Given this natural variability, there is broad agreement between the data and predictions. As predicted, the shatter of droplets was found to increase as droplet size and velocity increased, and the surface became harder to wet. Bouncing of droplets occurred most frequently on hard to wet surfaces with high surface tension mixtures. On the other hand, a number of small droplets with low impact velocity were observed to bounce when predicted to lie well within the adhering regime. We believe this discrepancy between the predictions and experimental data could be due to air layer effects that were not taken into account in the current bounce equations. Other discrepancies between experiment and theory are thought to be due to the current assumption of a dry impact surface, whereas, in practice, the leaf surfaces became increasingly covered with fluid throughout the spray test runs.

The Influence of Formulation, Buffering, pH and Divalent Cations on the Activity of Endothall on Hydrilla.

Endothall has been used as an aquatic herbicide for more than 40 years and provides very effective weed control of many weeds. Early research regarding the mechanism-of-action of endothall contradicts the symptomology normally associated with the product. Recent studies suggest endothall is a respiratory toxin but the mechanism-of-action remains unknown. To further elucidate the activity of endothall, several endothall formulations were evaluated for their effects on ion leakage, oxygen consumption and photosynthetic oxygen evolution from hydrilla shoot tips. The influence of pH, buffering and divalent cations was also evaluated. (PDF contains 6 pages.)

A Breakdown Criterion of Free Molecular Flows and an Optimum Analysis of EBPVD

Two important issues in electron beam physical vapor deposition (EBPVD) are addressed. The first issue is a validity condition of the classical cosine law widely used in the engineering context. This requires a breakdown criterion of the free molecular assumption on which the cosine law is established. Using the analytical solution of free molecular effusion flow, the number of collisions (N-c) for a particle moving from an evaporative source to a substrate is estimated that is proven inversely proportional to the local Knudsen number at the evaporation surface. N-c = 1 is adopted as a breakdown criterion of the free molecular assumption, and it is verified by experimental data and DSMC results. The second issue is how to realize the uniform distributions of thickness and component over a large-area thin film. Our analysis shows that at relatively low evaporation rates the goal is easy achieved through arranging the evaporative source positions properly and rotating the substrate.

Criterion of aerodynamic performance of large-scale offshore horizontal axis wind turbines

With the background of offshore wind energy projects, this paper studies aerodynamic performance and geometric characteristics of large capacity wind turbine rotors ( 1 to 10 MW), and the main characteristic parameters such as the rated wind speed, blade tip speed, and rotor solidity. We show that the essential criterion of a high-performance wind turbine is a highest possible annual usable energy pattern factor and a smallest possible dimension, capturing the maximum wind energy and producing the maximum annual power. The influence of the above-mentioned three parameters on the pattern factor and rotor geometry of wind turbine operated in China's offshore meteorological environment is investigated. The variation patterns of aerodynamic and geometric parameters are obtained, analyzed, and compared with each other. The present method for aerodynamic analysis and its results can form a basis for evaluating aerodynamic performance of large-scale offshore wind turbine rotors.

Energy landscape theory, funnels, specificity, and optimal criterion of biomolecular binding

We study the nature of biomolecular binding. We found that in general there exists several thermodynamic phases: a native binding phase, a non-native phase, and a glass or local trapping phase. The quantitative optimal criterion for the binding specificity is found to be the maximization of the ratio of the binding transition temperature versus the trapping transition temperature, or equivalently the ratio of the energy gap of binding between the native state and the average non-native states versus the dispersion or variance of the non-native states. This leads to a funneled binding energy landscape.

CRITERION OF POLYMER POLYMER MISCIBILITY DETERMINED BY VISCOMETRY

The criteria of polymer-polymer miscibility determined by viscometry are reviewed, and a new criterion is proposed based on the classical Huggins equation and the Huggins coefficient K(m) in the blends. It was found that, in a ternary (polymer-A)-(polymer-B)-solvent system, [GRAPHICS] In the absence of strong specific interaction forces between molecules that would encourage aggregation and at sufficiently low concentration, the above equation can be written thus: [GRAPHICS] This equation can be used to determine the miscibility of polymer blends, when: alpha greater-than-or-equal-to 0 miscible, alpha < 0 immiscible. It is found that the new criterion is reasonable and suitable to predict polymer-polymer miscibility by the viscometry method.

Influence of Formulation Factors on PpIX Production and Photodynamic Action of Novel ALA-loaded Microparticles

A novel 5-aminolevulinic acid (ALA)-containing microparticulate system was produced recently, based on incorporation of ALA into particles prepared from a suppository base that maintains drug stability during storage and melts at skin temperature to release its drug payload. The novel particulate system was applied to the skin of living animals, followed by study of protoporphyrin IX (PpIX) production. The effect of formulating the microparticles in different vehicles was investigated and also the phototoxicity of the PpIX produced using a model tumour. Particles formulated in propylene glycol gels (10% w/w ALA loading) generated the highest peak PpIX fluorescence levels in normal mouse skin. Peak PpIX levels induced in skin overlying subcutaneously implanted WiDr tumours were significantly lower than in normal skin for both the 10% w/w ALA microparticles alone and the 10% w/w ALA microparticles in propylene glycol gels during continuous 12 h applications. Tumours not treated with photodynamic therapy continued to grow over the 17 days of the anti-tumour study. However, those treated with 12 h applications of either the 10% w/w ALA microparticles alone or the 10% w/w ALA microparticles in propylene glycol gel followed by a single laser irradiation showed no growth. The gel formulation performed slightly better once again, reducing the tumour growth rate by approximately 105%, compared with the 89% reduction achieved using particles alone. Following the promising results obtained in this study, work is now going on to prepare particle-loaded gels under GMP conditions with the aim of initiating an exploratory clinical trial.

From "This is my body" to the Church in the twenty-first century: the Last Supper as the decisive moment and criterion of a renewed ecclesiology

Certains symptômes sont les indicateurs incontestés des très graves problèmes que connaît l’Église. S’ils existent aussi dans des confessions et des religions diverses, seuls seront examinés ici ceux qui concernent l’Église catholique. Parmi les plus significatifs figurent un fort déclin dans la participation à des activités religieuses comme les célébrations eucharistiques dominicales, surtout chez les jeunes, une pénurie presque catastrophique de prêtres ordonnés, une perte de prestige et d’influence de l’enseignement dispensé par l’Église. Ces symptômes varient en intensité selon les pays, mais les statistiques indiquent qu’ils se multiplient. Nombre de ces problèmes sont attribuables à l’extrême vélocité de changements qui surviennent partout et à l’apparente inaptitude de l’Église à s’adapter, en raison notamment de son attachement à la pensée néo-scolastique et à la tradition tridentine. Cette fidélité absolue à une tradition vieille de quatre cents ans l’empêche de se faire à un environnement en évolution rapide et radicale. Des changements appropriés s’imposent pratiquement partout dans l’Église. Or, pour que ceux-ci soient efficaces et respectueux de la nature propre de l’Église, la tradition est un guide qui ne suffit pas. S’appuyant sur les termes de l’encyclique Ecclesia de Eucharistia, « le moment décisif où elle (l’Église) a pris forme est certainement celui où a eu lieu l’institution de l’Eucharistie, dans la chambre à l’étage », la thèse présentée suit le plus près possible l’interprétation donnée aux paroles de Jésus, ceci est mon corps, telles qu’elles ont été prononcées la première fois. Selon cette évidence, il est permis d’affirmer que les caractéristiques définitoires de l’Église provenant de ces mots sont agape, unité, service. Tel doit être le principe directeur des changements. C’est sur une telle base que sont décrits les secteurs où les changements s’imposent ainsi que les aspects visés. Ces changements comprennent les points suivants : liturgie, sacrements, catéchèse, mystagogie, théologie, structure, gouvernance de l’Église et ses enseignements, évangélisation. Ces secteurs exigent des efforts sérieux dans la préparation des personnes touchées par ces changements et dans l’attention portée à l’exigence primordiale voulant qu’agape, unité et service soient les principes actifs et évidents régissant l’Église.

Recognition as a distinguishing criterion of IS journals

The number of journals publishing information systems (IS) research has grown dramatically over the past few decades. This has resulted in an environment where authors have a wider choice of journals in which to place articles. Electronic journals are now as readily recognised by authorities as print journals. This paper provides firm evidence in support of the assertion that the number of journals publishing IS research has increased. The paper also examines the Australian context where the selection of a journal in which to place an article is influenced by recognition from the Department of Education Science and Training (DEST). In Australia, obtaining DEST recognition as a recognised research journal is not an onerous task, and yet a significant number of IS journals have not done this. Publishing in a DEST recognised journal is essential for Australian researchers to contribute to their organisation’s research quantum and hence research funding. Attention is drawn to an increasing number of IS journals not recognised by DEST, and consequent action is recommended.

PLGA nanoparticles containing praziquantel: effect of formulation variables on size distribution

Praziquantel has been shown to be highly effective against all known species of Schistosoma infecting humans. Spherical nanoparticulate drug carriers made of poly(D,L-lactide-co-glycolide) acid with controlled size were designed. Praziquantel, a hydrophobic molecule, was entrapped into the nanoparticles with theoretical loading varying from 10 to 30% (w/w). This investigates the effects of some process variables on the size distribution of nanoparticles prepared by emulsion-solvent evaporation method. The results show that sonication time, PLGA and drug amounts, PVA concentration, ratio between aqueous and organic phases, and the method of solvent evaporation have a significant influence on size distribution of the nanoparticles. (C) 2004 Elsevier B.V. All rights reserved.