Asalariados rurales en el Valle de Uco (Mendoza, Argentina)

El objetivo de este artículo es analizar la inserción laboral de los trabajadores agrícolas asalariados en el Valle de Uco, provincia de Mendoza. Partimos de entender que las características del mercado de trabajo agrícola condicionan las inserciones laborales generando prácticas sociales ocupacionales que se expresan en disposiciones, orientaciones y estrategias de estos trabajadores. Estos trabajadores se caracterizan por una inserción laboral precaria y/o inestable y la percepción de ingresos insuficientes y discontinuos, a lo que se suman las frecuentes condiciones de vulnerabilidad social de sus hogares de pertenencia. El artículo contiene una descripción de la esfera laboral en tanto campo social en que se desempeñan los trabajadores agrícolas en el Valle de Uco. Luego analizamos algunos elementos vinculados a la socialización en el trabajo, aspecto importante para comprender las relaciones sociales que fundamentan la constitución del mercado de trabajo agrícola y la construcción de las "disposiciones" de los trabajadores. En el siguiente punto describimos y analizamos algunos elementos que orientan la inserción laboral de los trabajadores agrícolas conformando sus estrategias laborales. Finalmente, analizamos la mediación del hogar en la inserción laboral de los miembros.

Asalariados rurales en el Valle de Uco (Mendoza, Argentina)

El objetivo de este artículo es analizar la inserción laboral de los trabajadores agrícolas asalariados en el Valle de Uco, provincia de Mendoza. Partimos de entender que las características del mercado de trabajo agrícola condicionan las inserciones laborales generando prácticas sociales ocupacionales que se expresan en disposiciones, orientaciones y estrategias de estos trabajadores. Estos trabajadores se caracterizan por una inserción laboral precaria y/o inestable y la percepción de ingresos insuficientes y discontinuos, a lo que se suman las frecuentes condiciones de vulnerabilidad social de sus hogares de pertenencia. El artículo contiene una descripción de la esfera laboral en tanto campo social en que se desempeñan los trabajadores agrícolas en el Valle de Uco. Luego analizamos algunos elementos vinculados a la socialización en el trabajo, aspecto importante para comprender las relaciones sociales que fundamentan la constitución del mercado de trabajo agrícola y la construcción de las "disposiciones" de los trabajadores. En el siguiente punto describimos y analizamos algunos elementos que orientan la inserción laboral de los trabajadores agrícolas conformando sus estrategias laborales. Finalmente, analizamos la mediación del hogar en la inserción laboral de los miembros.

Asalariados rurales en el Valle de Uco (Mendoza, Argentina)

El objetivo de este artículo es analizar la inserción laboral de los trabajadores agrícolas asalariados en el Valle de Uco, provincia de Mendoza. Partimos de entender que las características del mercado de trabajo agrícola condicionan las inserciones laborales generando prácticas sociales ocupacionales que se expresan en disposiciones, orientaciones y estrategias de estos trabajadores. Estos trabajadores se caracterizan por una inserción laboral precaria y/o inestable y la percepción de ingresos insuficientes y discontinuos, a lo que se suman las frecuentes condiciones de vulnerabilidad social de sus hogares de pertenencia. El artículo contiene una descripción de la esfera laboral en tanto campo social en que se desempeñan los trabajadores agrícolas en el Valle de Uco. Luego analizamos algunos elementos vinculados a la socialización en el trabajo, aspecto importante para comprender las relaciones sociales que fundamentan la constitución del mercado de trabajo agrícola y la construcción de las "disposiciones" de los trabajadores. En el siguiente punto describimos y analizamos algunos elementos que orientan la inserción laboral de los trabajadores agrícolas conformando sus estrategias laborales. Finalmente, analizamos la mediación del hogar en la inserción laboral de los miembros.

Desarrollo de estándares de calidad para uvas Vitis vinifera L. cv. Malbec y Syrah

El objetivo del trabajo fue desarrollar estándares de calidad de uva basados en atributos físicos y químicos, capaces de predecir la calidad del vino. Se instaló una red de ensayos en Mendoza (Norte, Este y Valle de Uco), San Juan (Valle de Zonda), La Rioja (Chilecito), Catamarca y Salta (Valles Calchaquíes) (Argentina). Se ensayaron niveles de carga de uva (desbrote 30 y 50%, raleo 30 y 50% y testigo) en Malbec y Syrah. En la cosecha, las uvas fueron analizadas (tamaño baya, concentración azucarina, pH, antocianos, catequinas, taninos, fenoles totales) y vinificadas. Los vinos fueron analizados (alcohol, extracto seco, intensidad colorante, matiz, antocianos, catequinas, taninos, fenoles totales, color polimérico) y evaluados por un panel de degustadores. Empleando todos las variables de los vinos, mediante un análisis de componentes principales, se generaron dos índices que resumieron los atributos con mayor peso explicativo de la variabilidad observada (80%); ellos fueron: Riqueza Fenólica (RF, asociado a antocianos, taninos, catequinas, fenoles totales y concentración) y Peligro Oxidativo (PO, asociado a pH, matiz y tonalidad percibida). No existieron diferencias en cuanto a RF entre variedades ni entre niveles de producción de uva. Los vinos con RF mayor y PO menor se consideraron de mayor calidad. Las uvas cultivadas en zonas más frías tuvieron una mayor RF. En Malbec, las zonas frías y los bajos niveles productivos generaron un PO menor. Para cada variedad se desarrollaron predictores para RF y PO del vino. Se usó la regresión múltiple lineal paso a paso, seleccionando las variables de la uva con mayor poder predictivo. Se definieron las funciones de ajuste RFpred (Malbec R2 = 80%; Syrah R2 = 62%) y POpred (Malbec R2 = 80%; Syrah R2 = 62%). Los índices se tradujeron en estándares de calidad que mostraron concordancia entre uvas y vinos. La metodología puede ser válida para otras variedades tintas, pero debe ajustarse para cada caso. Los estándares permitirían asociar un precio a cada calidad y aumentar la transparencia del mercado.

Urban rural water exchange : PRW in the Lockyer Valley

A significant amount (ca. 15-25 GL/a) of PRW (Purified Recycled Water) from urban areas is foreseen as augmentation of the depleted groundwater resources of the Lockyer Valley (approx. 80 km west of Brisbane). Theresearch project uses field investigations, lab trials and modelling techniques to address the key challenges: (i) how to determine benefits of individual users from the augmentation of a natural common pool resource; (ii) how to minimise impacts of applying different quality water on the Lockyer soils, to creeks and on aquifier materials; (iii) how to minimuse mobilisation of salts in the unsaturated and saturated zones as a result of increased deep drainage; (iv) determination of potential for direct aquifer recharge using injection wells?

Understanding the Aquifier : 3D Visualisation and Groundwater Time-Series Animation in Lockyer Valley

The Lockyer Valley, southeast Queensland, hosts intensive irrigated agriculture using groundwater from over 5000 alluvial bores. A current project is considering introduction of PRW (purified recycled water) to augment groundwater supplies. To assess this, a valley-wide MODFLOW simulation model is being developed plus a new unsaturated zone flow model. To underpin these models and provide a realistic understanding of the aquifer framework a 3D visualisation model has been developed using Groundwater Visualisation System (GVS) software produced at QUT.

The hydrogeology, hydrology and hydrochemistry of the Condamine River Valley alluvium

The Cainozoic alluvium of the Condamine River valley is interpreted to consist of sediments deposited as floodplain and sheetwash deposits in bedrock valleys eroded into Mesozoic sedimentary rocks and tertiary volcanics. A maximum recorded sediment accumulation of 134 m is centred just south of Dalby. The lower section ofboth the flood plain and sheetwash alluvium is composed of variegated sandy and clayey sediments and the upper section of brown and grey sandy and clayey sediments.

Visualisation modelling in 3D of an alluvial aquifer system at a valley-wide scale to understand groundwater status : Lockyer, QLD

Visualisation provides a method to efficiently convey and understand the complex nature and processes of groundwater systems. This technique has been applied to the Lockyer Valley to aid in comprehending the current condition of the system. The Lockyer Valley in southeast Queensland hosts intensive irrigated agriculture sourcing groundwater from alluvial aquifers. The valley is around 3000 km2 in area and the alluvial deposits are typically 1-3 km wide and to 20-35 m deep in the main channels, reducing in size in subcatchments. The configuration of the alluvium is of a series of elongate “fingers”. In this roughly circular valley recharge to the alluvial aquifers is largely from seasonal storm events, on the surrounding ranges. The ranges are overlain by basaltic aquifers of Tertiary age, which overall are quite transmissive. Both runoff from these ranges and infiltration into the basalts provided ephemeral flow to the streams of the valley. Throughout the valley there are over 5,000 bores extracting alluvial groundwater, plus lesser numbers extracting from underlying sandstone bedrock. Although there are approximately 2500 monitoring bores, the only regularly monitored area is the formally declared management zone in the lower one third. This zone has a calibrated Modflow model (Durick and Bleakly, 2000); a broader valley Modflow model was developed in 2002 (KBR), but did not have extensive extraction data for detailed calibration. Another Modflow model focused on a central area river confluence (Wilson, 2005) with some local production data and pumping test results. A recent subcatchment simulation model incorporates a network of bores with short-period automated hydrographic measurements (Dvoracek and Cox, 2008). The above simulation models were all based on conceptual hydrogeological models of differing scale and detail.

A 3D visualisation model applied to a thick, multi-layered alluvial groundwater system under stress : Condamine Valley, QLD

The upper Condamine River in southern Queensland has formed extensive alluvial deposits which have been used for irrigation of cotton crops for over 40 years. Due to excessive use and long term drought conditions these groundwater resources are under substantial threat. This condition is now recognised by all stakeholders, and Qld Department of Environment and Resource Management (DERM) are currently undertaking a water planning process for the Central Condamine Alluvium with water users and other stakeholders. DERM aims to effectively demonstrate the character of the groundwater system and its current status, and notably the continued long-term drawdown of the watertable. It was agreed that 3D visualisation was an ideal tool to achieve this. The Groundwater Visualisation System (GVS) developed at QUT was utilised and the visualisation model developed in conjunction with DERM to achieve a planning-management tool for this particular application

Diversity of Cicadellidae in agricultural production areas in the Ovens Valley, Northeast Victoria, Australia

There is a paucity of data on the distribution of Cicadellidae (leafhoppers) in Australia. This study quantifies the relative abundance, seasonal activity and diversity of leafhoppers in the Ovens Valley region of north-east Victoria, Australia. Species diversity and abundance was assessed at four field sites in and around the field borders of commercially grown tobacco crops using three sampling techniques (pan trap, sticky trap and sweep net). Over 51 000 leafhopper samples were collected, with 57 species from 11 subfamilies and 19 tribes identified. Greater numbers and diversity of leafhoppers were collected in yellow pan traps. The predominant leafhopper collected was Orosius orientalis (Matsumura). Twenty-three leafhopper species were recorded for the first time in Victoria and eight economically important pest species were recorded. Seasonal activity of selected leafhopper species, covering two sampling seasons, is presented.

Use of 3D visualisation to enhance groundwater stable isotope data and its interpretation, Lockyer Valley, southeast Queensland

The use of stable isotope ratios δ18O and δ2H are well established in assessment of groundwater systems and their hydrology. The conventional approach is based on x/y plots and relation to various MWL’s, and plots of either ratio against parameters such as Clor EC. An extension of interpretation is the use of 2D maps and contour plots, and 2D hydrogeological vertical sections. An enhancement of presentation and interpretation is the production of “isoscapes”, usually as 2.5D surface projections. We have applied groundwater isotopic data to a 3D visualisation, using the alluvial aquifer system of the Lockyer Valley. The 3D framework is produced in GVS (Groundwater Visualisation System). This format enables enhanced presentation by displaying the spatial relationships and allowing interpolation between “data points” i.e. borehole screened zones where groundwater enters. The relative variations in the δ18O and δ2H values are similar in these ambient temperature systems. However, δ2H better reflects hydrological processes, whereas δ18O also reflects aquifer/groundwater exchange reactions. The 3D model has the advantage that it displays borehole relations to spatial features, enabling isotopic ratios and their values to be associated with, for example, bedrock groundwater mixing, interaction between aquifers, relation to stream recharge, and to near-surface and return irrigation water evaporation. Some specific features are also shown, such as zones of leakage of deeper groundwater (in this case with a GAB signature). Variations in source of recharging water at a catchment scale can be displayed. Interpolation between bores is not always possible depending on numbers and spacing, and by elongate configuration of the alluvium. In these cases, the visualisation uses discs around the screens that can be manually expanded to test extent or intersections. Separate displays are used for each of δ18O and δ2H and colour coding for isotope values.

Assessment of pre- and post-flood groundwater recharge via 3D visualisation, Lockyer Valley, southeast Queensland

The Lockyer Valley in southeast Queensland supports important and intensive irrigation which is dependant on the quality and availability of groundwater. Prolonged drought conditions from ~1997 resulted in a depletion of the alluvial aquifers, and concern for the long-term sustainability of this resource. By 2008, many areas of the valley were at < 20% of storage. Some relief occurred with rain events in early 2009, then in December 2010 - January 2011, most of southeast Queensland experienced unprecedented flooding. These storm-based events have caused a shift in research focus from investigations of drought conditions and mitigation to flood response analysis. For the alluvial aquifer system of the valley, a preliminary assessment of groundwater observation bore data, prior to and during the flood, indicates that there is a spatially variable aquifer response. While water levels in some bores screened in unconfined shallow aquifers have recovered by more than 10 m within a short period of time (months), others show only a small or moderate response. Measurements of pre- and post-flood groundwater levels and high-resolution time-series records from data loggers are considered within the framework of a 3D geological model of the Lockyer Valley using Groundwater Visualisation System(GVS). Groundwater level fluctuations covering both drought and flood periods are used to estimate groundwater recharge using the water table fluctuation method (WTF), supplemented by estimates derived using chloride mass balance. The presentation of hydraulic and recharge information in a 3D format has considerable advantages over the traditional 2D presentation of data. The 3D approach allows the distillation of multiple types of information(topography, geological, hydraulic and spatial) into one representation that provides valuable insights into the major controls of groundwater flow and recharge. The influence of aquifer lithology on the spatial variability of groundwater recharge is also demonstrated.