4,5-二溴苯基荧光酮-钛(Ⅳ)-Tween-80分光光度法测定尿蛋白

本文提出了一个借钛-4,5-二溴苯基荧光酮(DBPF)-Tween-80与蛋白质显色反应光度测定微量尿蛋白的高灵敏方法。在pH2.9,血清蛋白能与Ti-DBPF-Tween-80形成蓝色络合物,最大吸收波长为605nm。加入小量乙醇能提高方法的灵敏度和稳定性,牛血清蛋白含量在0～150μg/25ml范围内服从Beer定律。尿液中其它成分不干扰测定。用拟定的方法测定人尿蛋白,获得满意结果。

Effect of soybean oil and Tween 80 on the production of botryosphaeran by Botryosphaeria rhodina MAMB-05

The addition of soybean oil and Tween 80 was evaluated with the objective of increasing the production of botryosphaeran, an exopolysaccharide (EPS) of the (1 -> 3 ;1 -> 6)-beta-D-glucan type produced by the fungus Botowsphaeria rhodina MAMB-05. Factorial design and analysis by response surface methodology was developed to select the main factors that would affect and enhance EPS production. The optimized culture conditions were: 40g l(-1) glucose with 10ml l(-1) soybean oil, and 4.5 ml l(-1) Tween 80, during 72h cultivation at 28 degrees C (180 rpm) and initial pH 5.7. The predicted result for botryosphaeran production was 8.22 +/- 1.36 g l(-1), and compared with the experimental value of 7.74 +/- 0.13 g l(-1) . Partial characterization of the botryosphaeran produced under the optimized conditions showed one type of polysaccharide with P-glycosidic linkages containing glucose as monosaccharide. (c) 2007 Elsevier Ltd. All rights reserved.

Estudo da eficácia do tensoativo sorbitano tween 80 veiculado em nanoemulsão contendo óleo de soja, como inibidor de corrosão

Nowadays, the use of chemicals that satisfactorily meet the needs of different sectors of the chemical industry is linked to the consumption of biodegradable materials. In this context, this work contemplated biotechnological aspects with the objective of developing a more environmentally-friendly corrosion inhibitor. In order to achieve this goal, nanoemulsion-type systems (NE) were obtained by varying the amount of Tween 80 (9 to 85 ppm) a sortitan surfactant named polyoxyethylene (20) monooleate. This NE-system was analyzed using phase diagrams in which the percentage of the oil phase (commercial soybean oil, codenamed as OS) was kept constant. By changing the amount of Tween 80, several polar NE-OS derived systems (O/W-type nanoemulsion) were obtained and characterized through light scattering, conductivity and pH, and further subjected to electrochemical studies. The interfacial behavior of these NE-OS derived systems (codenamed NE-OS1, S2, S3, S4 and S5) as corrosion inhibitors on carbon steel AISI 1020 in saline media (NaCl 3.5%) were evaluated by measurement of Open Circuit Potential (OCP), Polarization Curves (Tafel extrapolation method) and Electrochemical Impedance Spectroscopy (EIS). The analyzed NE-OS1 and NE-OS2 systems were found to be mixed inhibitors with quantitative efficacy (98.6% - 99.7%) for concentrations of Tween 80 ranging between 9 and 85 ppm. According to the EIS technique, maximum corrosion efficiency was observed for some tested NE-OS samples. Additionaly to the electrochemical studies, Analysis of Variance (ANOVA) and Principal Component Analysis (PCA) were used, characterization of the nanoemulsion tested systems and adsorption studies, respectively, which confirmed the results observed in the experimental analyses using diluted NE-OS samples in lower concentrations of Tween 80 (0.5 1.75 ppm)

Characterisation of the Interaction of Lactate Dehydrogenase With Tween-20 Using Isothermal Titration Calorimetry, Interfacial Rheometry and Surface Tension Measurements

In this study the nature of the interaction between Tween-20 and lactate dehydrogenase (LDH) was investigated using isothermal titration calorimetry (ITC). In addition the effects of the protein and surfactant on the interfacial properties were followed with interfacial rheology and surface tension measurements in order to understand the mechanism by which the surfactant prevents protein adsorption to the air– water interface. Comparisons were made with Tween-40 and Tween-80 in order to further investigate the mechanism. ITC measurements indicated a weak, probably hydrophobic, interaction between Tween-20 and LDH. Prevention of LDH adsorption to the air–water interface by the Tween surfactants was correlated with surface energy rather than surfactant CMC. While surface pressure appears to be the main driving force for the displacement of LDH from the air–water interface by Tween-20 a solubilisation mechanism may exist for other protein molecules. More generally the results of this study highlight the value of the use of ITC and interfacial measurements in characterising the surface behaviour of mixed surfactant and protein systems.

In vitro infection of sheep lice (Bovicola ovis Schrank) by Steinernematid and Heterorhabditid nematodes.

Control of sheep lice with conventional pesticides can be compromised by difficulty in contacting lice in the dense water repellent fleeces of sheep, particularly when sheep have not been recently shorn. Entomopathogenic nematodes (ENs) are motile and are able to actively seek out insect hosts. They have particular advantages for the control of pests in cryptic habitats, such as the fleeces of sheep and avoid many of the problems frequently associated with chemical controls. This study investigated whether ENs were able infect and kill Bovicola ovis and compared the effectiveness of different species at different temperatures and when applied to wool. Four species of nematodes, Steinernema carpocapsae, Steinernema riobrave, Steinernema feltiae and Heterorhabditis bacteriophora were tested. All were shown to infect and kill lice in Petri dish assays at 30C. At 35C, the percent infection for S. carpocapsae and S. riobrave was significantly higher than for the other two species and percent infection by S. feltiae was significantly greater than for H. bacteriophora (P<0.05). At 37C the percent mortality induced by S. riobrave was significantly greater than for S. carpocapsae (P<0.05). All species were able to locate and infect lice in wool when formulated in water with 8% Tween 80. In wool assays the percent lice infected with nematodes was significantly greater for S. riobrave than H.bacteriophora at 25C, but there were no other differences between species (P=0.05). S. carpocapsae, S. riobrave and S. feltiae caused significantly higher lice mortality than H. bacteriophora at both 25 and 35C in wool assays, but mortality induced by the three steinernematid species did not differ significantly (P>0.05). It is concluded that of the ENs studied S. riobrave is likely to be most effective against B. ovis when applied to live sheep because of its greater tolerance to high temperatures and 'cruiser' foraging strategy .

Possible involvement of a calcium-stimulated ATP-hydrolyzing activity associated with mycobacteriophage I3 in the DNA injection process.

Ca2+ ions are necessary for the successful propagation of mycobacteriophage I3. An assay for the phage DNA release in the presence of an isolated cell wall preparation from the host was established, and in this system Ca2+ ions also stimulated the release of DNA. The inhibition of phage DNA injection caused by Tween 80 (polyoxyethylene sorbitan monooleate), a nonionic detergent routinely used in mycobacterial cultures, was reversed by Ca2+. The presence of a phage-associated ATP-hydrolyzing activity was demonstrated. This enzyme was stimulated by Ca2+ ions and inhibited by Tween 80. From this and the behavior of the two agents at the level of DNA injection, as well as the fact that phage I3 has a contractile tail structure, we conclude that the phage-associated ATPase is involved in the DNA injection process.

Pillaring of smectites using an aluminium oligomer: A study of pillar density and thermal stability

Two smectite samples having different layer charges were pillared using hydroxy aluminium oligomers at a OH/Al ratio of 2.5 and at pH 4.3 to 4.6. Pillaring was carried out at different conditions such as ageing, temperature and base addition time of the pillaring solution, and also in the presence of nonionic surfactant polyoxyethylene sorbitanmonooleate (Tween-80). The primary objective of preparing at different conditions was to introduce varied quantities of aluminium oligomer between the layers and to study its effect on the properties of the pillared products. A simple method has been followed to estimate the amount of interlayer aluminium. A quantity called pillar density number (PDN) based on the ratio of interlayer Al adsorbed to CEC of the parent clay has been effectively used to evaluate the nature of the resulting pillared product. PDN, for a given clay, was found to correlate well with the sharpness of the d(001) peaks for the air dried samples. The calculated number of pillars, varied from 3.00 x 10(18) to 5.32 x 10(18) per meq charge. The present study shows that a higher value of PDN is indicative of better thermal stability. Pillar density number may be conveniently used as a measure of the thermal stability of pillared samples.

Enhancing the mesoporosity of pillared clay catalyst - a study of pillar aggregates and deactivation in alkylation reaction

A sample of montmorillonite was pillared with aluminium polyoxycations in presence of different amounts of tween-80, a nonionic surfactant, ranging from 0.01 to 0.20 mmol/meq of clay. The amount of aluminium sorbed was found to vary with the amount of surfactant added during pillaring. Vapour phase catalytic activity of the samples for alkylation of toluene with methanol in a fixed bed down flow reactor showed that the rate of deactivation, in general, increased with decrease in the pillar density. The samples treated with 0.06 to 0.08 mmol/meq of surfactant showed the lowest deactivation and also an enhancement in the mesopores which did not change on calcining to 540°C. Suppression of deactivation is attributed to the distribution of pillars by the surfactant in such a way as to decrease the coke formation.

Avaliação de diferentes estratégias de biorremediação de solo argiloso contaminado por óleo em biorreator de fase semi-sólida

A prática da troca de óleo lubrificante usado, particularmente óleos automotivos, representa um grave problema ambiental em função de sua natureza perigosa, do manuseio incorreto e do descarte indiscriminado no meio ambiente. A investigação quanto à remediação de áreas contaminadas por esse resíduo torna-se necessária, particularmente para solo de natureza argilosa. O presente estudo teve por objetivo avaliar a biorremediação de um solo argiloso contaminado por óleo lubrificante utilizando biorreatores de fase semi-sólida. Frascos tipo Erlenmeyer, contendo 20 g de solo contaminado com 3% (m/m) de óleo lubrificante, em triplicata, foram mantidos em temperatura e agitação constantes, segundo as seguintes estratégias de tratamento: (i) Bioestímulo com ajuste de nutrientes (BIOE); (ii) Bioaumento com adição de inóculo microbiano aclimatado (BIOA); (iii) Bioestímulo e adição de surfactante sintético Tween-80 (BIOES); (iv) Bioaumento, bioestímulo e surfactante sintético Tween-80 (BIOAS) e (iv) controle, com água destilada purificada (CONT). A eficiência de remoção do contaminante foi avaliada após 68 dias de tratamento por análises de evolução de CO2, redução de COT, decaimento de HTP, de n-alcanos e frações de hidrocarbonetos saturados, aromáticos e compostos polares. O tratamento BIOAS resultou na maior produção de CO2 acumulada (1247,0 mg.20g-1 de solo) seguida pelo tratamento BIOES (1077,6 mg.20g-1 de solo). Ao final do experimento, todos os tratamentos reduziram significativamente os teores de HTPs quando comparados ao controle (11,14,2%). Os tratamentos BIOAS e BIOES não apresentaram diferenças significativas quanto à redução de HTPs (42,03,7% e 37,46,3%, respectivamente). Tanto o bioestímulo quanto o bioaumento mostraram-se estratégias com potencial para aumentar a eficácia da biorremediação de solos argilosos, sendo que a adição de surfactante foi o fator mais importante, tendo aumentado significativamente a capacidade de remoção em ambas as estratégias. O uso de biorreatores em fase semi-sólida na biorremediação de solo argiloso contaminado com óleo lubrificante mostrou-se bastante promissor e tal estratégia pode ser aplicada em escala imediatamente superior

Enzyme induction in Neurospora crassa

I. Studies on Nicotinamide Adenine Dinucleotide Glycohydrase (NADase)

NADase, like tyrosinase and L-amino acid oxidase, is not present in two day old cultures of wild type Neurospora, but it is coinduced with those two enzymes during starvation in phosphate buffer. The induction of NADase, like tyrosinase, is inhibited by puromycin. The induction of all three enzymes is inhibited by actinomycin D. These results suggest that NADase is synthesized de novo during induction as has been shown directly for tyrosinase. NADase induction differs in being inhibited by certain amino acids.

The tyrosinaseless mutant ty-1 contains a non-dialyzable, heat labile inhibitor of NADase. A new mutant, P110A, synthesizes NADase and L-amino acid oxidase while growing. A second strain, pe, fl;cot, makes NADase while growing. Both strains can be induced to make the other enzymes. These two strains prove that the control of these three enzymes is divisible. The strain P110A makes NADase even when grown in the presence of Tween 80. The synthesis of both NADase and L-amino acid oxidase by P110A is suppressed by complete medium. The theory of control of the synthesis of the enzymes is discussed.

II. Studies with EDTA

Neurospora tyrosinase contains copper but, unlike other phenol oxidases, this copper has never been removed reversibly. It was thought that the apo-enzyme might be made in vivo in the absence of copper. Therefore cultures were treated with EDTA to remove copper before the enzyme was induced. Although no apo-tyrosinase was detected, new information on the induction process was obtained.

A treatment of Neurospora with 0.5% EDTA pH 7, inhibits the subsequent induction during starvation in phosphate buffer of tyrosinase, L-amino acid oxidase and NADase. The inhibition of tyrosinase and L-amino acid oxidase induction is completely reversed by adding 5 x 10^-5M CaCl₂, 5 x 10^-4M CuSO₄, and a mixture of L-amino acids (2 x 10^-3M each) to the buffer. Tyrosinase induction is also fully restored by 5 x 10^-4M CaCl₂ and amino acids. As yet NADase has been only partially restored.

The copper probably acts by sequestering EDTA left in the mycelium and may be replaced by nickel. The EDTA apparently removes some calcium from the mycelium, which the added calcium replaces. Magnesium cannot replace calcium. The amino acids probably replace endogenous amino acids lost to the buffer after the EDTA treatment.

The EDTA treatment also increases permeability, thereby increasing the sensitivity of induction to inhibition by actinomycin D and allowing cell contents to be lost to the induction buffer. EDTA treatment also inhibits the uptake of exogenous amino acids and their incorporation into proteins.

The lag period that precedes the first appearance of tyrosinase is demonstrated to be a separate dynamic phase of induction. It requires oxygen. It is inhibited by EDTA, but can be completed after EDTA treatment in the presence of 5 x 10^-5M CaCl₂ alone, although no tyrosinase is synthesized under these conditions.

The time course of induction has an early exponential phase suggesting an autocatalytic mechanism of induction.

The mode of action of EDTA, the process of induction and the kinetics of induction are discussed.

Fermentação alcoólica de hidrolisado de farelo de mandioca usando levedura Saccharomyces cerevisiae álcool resistente

A matriz energética mundial é baseada em fontes fósseis e renováveis. No Brasil, o bioetanol é gerado principalmente a partir da cana-de-açúcar. Resíduos agroindustriais (fontes celulósicas ou amiláceas) despontam como biomassas alternativas à cana-de-açúcar, para aumentar a competitividade deste combustível renovável frente aos de origem fóssil e também favorecer a sustentabilidade e a segurança alimentar e energética, pois são ricos em polissacarídeos não diretamente fermentescíveis, abundantes (problema ambiental) e apresentam baixo valor comercial. O farelo de mandioca é um exemplo de resíduo sólido gerado na produção de fécula (amido) e farinha de mandioca que ainda contém, em média, 75% de amido. Consequentemente, deve ser previamente hidrolisado e posteriormente fermentado por leveduras do gênero Saccharomyces para gerar etanol. O objetivo deste estudo foi produzir bioetanol a partir de hidrolisados enzimáticos de farelo de mandioca, usando levedura álcool resistente (AR). Primeiramente, a concentração de açúcares obtida a partir da hidrólise enzimática foi verificada através de um planejamento fatorial completo (24), com triplicata no ponto central, a fim de investigar a influência dos seguintes fatores na hidrólise: concentração de α-amilase (Termamyl 2X), tempo de liquefação, concentração de glucoamilase (AMG 300L) e o tempo sacarificação. A condição de hidrólise mais favorável foi a do ensaio com 0,517 mL de AMG/g amido, 0,270 mL de Termamyl/g amido, 1h de tempo de liquefação e 2h de tempo de sacarificação. O caldo resultante da condição escolhida alcançou altas concentrações de glicose (160 g/L). Os ensaios de fermentação alcoólica foram realizados em duplicata em biorreator de 3L, em regime de batelada, a 30C, 100 rpm e pH 5,5. Cerca de 3 g/L (massa seca) de uma linhagem de levedura álcool tolerante, Saccharomyces cerevisiae Hansen BY4741, crescida por 12h em meio YEDP (2% de glicose) foram usados como inóculo. O mosto consistiu de um litro de hidrolisado (160 g/L de glicose) fortificado com extrato de levedura (1%) e peptona de carne (1%), além da adição de um antiespumante (Tween 80) na concentração de 0,05% (m/v). Em 30 horas de fermentação, a média da concentração de etanol obtida foi de 65 g/L. A eficiência foi de 87,6% e o rendimento e a produtividade foram 0,448 e 2,16 g/L.h, respectivamente. Os resultados indicaram a aplicabilidade do farelo de mandioca como matéria-prima para a produção de bioetanol