Subsurface drip irrigation emitter spacing effects on soil water redistribution, corn yield and water productivity

Emitter spacings of 0.3 to 0.6 m are commonly used for subsurface drip irrigation (SDI) of corn on the deep, silt loam soils of the U.S. Great Plains. Subsurface drip irrigation emitter spacings of 0.3, 0.6, 0.9 and 1.2 m were examined for the resulting differences in soil water redistribution, corn grain yield, yield components, seasonal water use, and water productivity in a 4‐year field study (2005 through 2008) at the Kansas State University Northwest Research‐Extension Center, Colby, Kansas. The results indicate that there is increased preferential water movement along the dripline (parallel) as compared to perpendicular to the dripline and that this phenomenon partially compensates for wider emitter spacings in terms of soil water redistribution. Corn yield and water productivity (WP) were not significantly affected by the emitter spacing with application of a full irrigation regime

Influència de la temperatura i humitat relativa en l’esporulació del fong “Stemphylium vesicarium” en fulles de perera

Estudi de la fase asexual del fong deuteromicet Stemphylium vesicarium causant de l’estemfilosi de la perera

Avaluació per capacitat agrològica i capacitat de segrest de carboni dels sòls d’un transsecte de la comarca de La Selva

Aquest projecte es basa en obtenir informació dels sòls d’una zona representativa de la comarca de La Selva on hi trobàvem sòls amb diferents usos i diferents orígens geològics. Es pretén conèixer les propietats físico-químiques d’aquests sòls i la contribució dels diferents usos i orígens geològics del sòl respecte les emissions de diòxid de carboni. També s'avaluen les classes de capacitat agrològica i el coeficient de mineralització del carboni

Avaluació de la tècnica de fitoextracció per a la reducció de concentracions de metalls pesants en sòls contaminats per la indústria minera

L’explotació minera, especialment la mineria metàl•lica, ha estat sempre associada a riscos de contaminació ambiental de sòls, aigües i vegetació, originats per l’activitat extractiva, les operacions de concentració dels minerals i pels emplaçaments de residus miners sense una gestió adequada. En molts casos els residus miners s’abocaven directament a rius i rierols o s’acumulaven en piles pròximes a centres habitats i activitats agrícoles. Concretament s’estudia els cas de les mines d’Osor. Donada la possible presència de quantitats elevades de metalls pesants en aquests sòls es decideix avaluar una tècnica de remediació de sòls lleugera com la fitoextracció. La fitoextracció es basa en l’ús de plantes bioacumuladores que absorbeixen metalls del sòl. Aquesta tècnica permet una descontaminació del sòl no agressiva i de baix cost però requereix un tractament de llarga durada

Desenvolupament d'una draga per al mostreig de sòls marins

A l'empresa PRAESENTIS S.L. se li proposà la construcció d'una draga per utilitzar-la en el mostreig de sòls marins en expedicions científiques a mar obert. Segons les especificacions del projecte, la draga resultant haurà de ser capaç de recollir mostres d'una capacitat d'entre 60 i 80 l. amb una profunditat de cavat de fins a 20 cm., i haurà de poder assolir profunditats de treball de fins a 500 m. per sota el nivell del mar. El tipus de sòl en el qual es treballarà és de tipus arenós. La draga projectada és un mecanisme basat en una pala bivalva activada per un cilindre hidràulic que utilitza com a bancada una estructura que a l'hora fa la funció de xassís

Avaluació per capacitat agrològica dels sòls del municipi de Sant Gregori

El projecte consisteix en realitzar l’avaluació dels sòls del municipi de Sant Gregori i la seva posterior classificació per Capacitat Agrològica. Aquest projecte es va portar a terme per pal•liar la manca d’informació sobre sòls que hi ha nivell local

Emissions de N2O i desnitrificació en sòls agrícoles i d'ecosistemes naturals. Factors de regulació

La major conscienciació actual dels problemes de pol·lució que acompanyen les pèrdues de N del sòl cap a l'atmosfera ha reorientat les investigacions cap a un coneixement més profund dels processos implicats en les emissions dels compostos nitrogenats que comporten un major perjudici des d'un punt de vista ecològic així com els seus principals factors reguladors. La creixent preocupació per l'increment de la concentració atmosfèrica de N2O és deguda a les seves interaccions amb la fotoquímica atmosfèrica i el balanç de radiació de la Terra ja que intervé en la destrucció de la capa estratosfèrica d'ozó, contribueix a l'efecte hivernacle i participa de la pluja àcida. Es considera que els sòls són la principal font de N2O atmosfèric. Al voltant del 90% d'aquestes emissions són d'origen biòtic; els principals processos implicats són la desnitrificació i la nitrificació. L'emissió del N2O produït a través d'aquests dos processos es caracteritza pels diferents nivells de regulació que presenta ja que depèn de la taxa dels processos, de la proporció de N canalitzada per cada procés cap a la producció de N2O i del seu consum dins el mateix sòl el qual està relacionat amb les dificultats en el transport cap a l'atmosfera. Això comporta una gran dificultat a l'hora d'aprofundir en el coneixement de les emissions de N2O del sòl cap a l'atmosfera i de la seva regulació. El desconeixement dels nivells d'emissió de N2O i de la importància de la desnitrificació així com de la seva regulació tant en sòls agrícoles com naturals de les nostres contrades és el principal punt de partida dels objectius d'aquest treball.

Desenvolupament de mètodes de determinació de compostos fenòlics en aigües i sòls. Caracterització dels processos d'adsorció en diferents tipus de sòls.

El desenvolupament de mètodes d'anàlisi de compostos fenòlics és una pràctica habitual en molts laboratoris des de l'establiment de mesures legislatives de control de les concentracions d'aquestes substàncies en el medi ambient. Les tècniques cromatogràfiques representen la primera opció per a la determinació de la major part de compostos orgànics, en els que s'inclouen els fenols. Aquests, per les seves propietats de volatilitat i polaritat, poden analitzar-se emprant tant la cromatografia líquida com la cromatografia de gasos i aquesta dualitat s'ha aplicat en aquest treball.

Process for reinforcing SLS parts by epoxy resin

[ES]The purpose of this paper is to report on the use of a combination of selective laser sintering (SLS) and vacuum casting to create plastic composites made by additive manufacturing.

Properties comparison of Injected and SLS material

Most of the plastic injection companies are focused in the production of some products with a high exigency standard levels. That is why, to compete and gain some market share in front of the concurrency of companies from other countries, they need to be able to introduce new rapid prototyping techniques and product development.

(Table 1) Geographical location and nutrient composition of saline lake sediments (SLS) and nearby adjacent biological soil crusts (BSC) identified as potential dust sources

While microbial communities of aerosols have been examined, little is known about their sources. Nutrient composition and microbial communities of potential dust sources, saline lake sediments (SLS) and adjacent biological soil crusts (BSC), from Southern Australia were determined and compared with a previously analyzed dust sample. Multivariate analyses of fingerprinting profiles indicated that the bacterial communities of SLS and BSC were different, and these differences were mainly explained by salinity. Nutrient concentrations varied among the sites but could not explain the differences in microbial diversity patterns. Comparison of microbial communities with dust samples showed that deflation selects against filamentous cyanobacteria, such as the Nostocales group. This could be attributed to the firm attachment of cyanobacterial filaments to soil particles and/or because deflation occurs mainly in disturbed BSC, where cyanobacterial diversity is often low. Other bacterial groups, such as Actinobacteria and the spore-forming Firmicutes, were found in both dust and its sources. While Firmicutes-related sequences were mostly detected in the SLS bacterial communities (10% of total sequences), the actinobacterial sequences were retrieved from both (11-13%). In conclusion, the potential dust sources examined here show highly diverse bacterial communities and contain nutrients that can be transported with aerosols. The obtained fingerprinting and sequencing data may enable back tracking of dust plumes and their microorganisms.

Dynamic matrix control on wind-induced vibration of spatial latticed structures [Chinese title = 空间网壳结构风振抑制的动态矩阵预测控制分析]

Ameliorated strategies were put forward to improve the model predictive control in reducing the wind induced vibration of spatial latticed structures. The dynamic matrix control (DMC) predictive method was used and the reference trajectory which is called the decaying functions was suggested for the analysis of spatial latticed structure (SLS) under wind loads. The wind-induced vibration control model of SLS with improved DMC model predictive control was illustrated, then the different feedback strategies were investigated and a typical SLS was taken as example to investigate the reduction of wind-induced vibration. In addition, the robustness and reliability of DMC strategy were discussed by varying the model configurations.

The 3D kinematics of the single leg flat and decline squat

Background: Pre-participation screening is commonly used to measure and assess potential intrinsic injury risk. The single leg squat is one such clinical screening measure used to assess lumbopelvic stability and associated intrinsic injury risk. With the addition of a decline board, the single leg decline squat (SLDS) has been shown to reduce ankle dorsiflexion restrictions and allowed greater sagittal plane movement of the hip and knee. On this basis, the SLDS has been employed in the Cricket Australia physiotherapy screening protocols as a measure of lumbopelvic control in the place of the more traditional single leg flat squat (SLFS). Previous research has failed to demonstrate which squatting technique allows for a more comprehensive assessment of lumbopelvic stability. Tenuous links are drawn between kinematics and hip strength measures within the literature for the SLS. Formal evaluation of subjective screening methods has also been suggested within the literature. Purpose: This study had several focal points namely 1) to compare the kinematic differences between the two single leg squatting conditions, primarily the five key kinematic variables fundamental to subjectively assess lumbopelvic stability; 2) determine the effect of ankle dorsiflexion range of motion has on squat kinematics in the two squat techniques; 3) examine the association between key kinematics and subjective physiotherapists’ assessment; and finally 4) explore the association between key kinematics and hip strength. Methods: Nineteen (n=19) subjects performed five SLDS and five SLFS on each leg while being filmed by an 8 camera motion analysis system. Four hip strength measures (internal/external rotation and abd/adduction) and ankle dorsiflexion range of motion were measured using a hand held dynamometer and a goniometer respectively on 16 of these subjects. The same 16 participants were subjectively assessed by an experienced physiotherapist for lumbopelvic stability. Paired samples t-tests were performed on the five predetermined kinematic variables to assess the differences between squat conditions. A Bonferroni correction for multiple comparisons was used which adjusted the significance value to p = 0.005 for the paired t-tests. Linear regressions were used to assess the relationship between kinematics, ankle range of motion and hip strength measures. Bivariate correlations between hip strength measures and kinematics and pelvic obliquity were employed to investigate any possible relationships. Results: 1) Significant kinematic differences between squats were observed in dominant (D) and non-dominant (ND) end of range hip external rotation (ND p = <0.001; D p = 0.004) and hip adduction kinematics (ND p = <0.001; D p = <0.001). With the mean angle, only the non-dominant leg observed significant differences in hip adduction (p = 0.001) and hip external rotation (p = <0.001); 2) Significant linear relationships were observed between clinical measures of ankle dorsiflexion and sagittal plane kinematic namely SLFS dominant ankle (p = 0.006; R2 = .429), SLFS non-dominant knee (p = 0.015; R2 = .352) and SLFS non-dominant ankle (p = 0.027; R2 = .305) kinematics. Only the dominant ankle (p = 0.020; R2 = .331) was found to have a relationship with the decline squat. 3) Strength measures had tenuous associations with the subjective assessments of lumbopelvic stability with no significant relationships being observed. 4) For the non-dominant leg, external rotation strength and abduction strength were found to be significantly correlated with hip rotation kinematics (Newtons r = 0.458 p = 0.049; Normalised for bodyweight: r = 0.469; p = 0.043) and pelvic obliquity (normalised for bodyweight: r = 0.498 p = 0.030) respectively for the SLFS only. No significant relationships were observed in the dominant leg for either squat condition. Some elements of the hip strength screening protocols had linear relationships with kinematics of the lower limb, particularly the sagittal plane movements of the knee and ankle. Strength measures had tenuous associations with the subjective assessments of lumbopelvic stability with no significant relationships being observed; Discussion: The key finding of this study illustrated that kinematic differences can occur at the hip without significant kinematic differences at the knee as a result of the introduction of a decline board. Further observations reinforce the role of limited ankle dorsiflexion range of motion on sagittal plane movement of the hip and knee and in turn multiplanar kinematics of the lower limb. The kinematic differences between conditions have clinical implications for screening protocols that employ frontal plane movement of the knee as a guide for femoral adduction and rotation. Subjects who returned stronger hip strength measurements also appeared to squat deeper as characterised by differences in sagittal plane kinematics of the knee and ankle. Despite the aforementioned findings, the relationship between hip strength and lower limb kinematics remains largely tenuous in the assessment of the lumbopelvic stability using the SLS. The association between kinematics and the subjective measures of lumbopelvic stability also remain tenuous between and within SLS screening protocols. More functional measures of hip strength are needed to further investigate these relationships. Conclusion: The type of SLS (flat or decline) should be taken into account when screening for lumbopelvic stability. Changes to lower limb kinematics, especially around the hip and pelvis, were observed with the introduction of a decline board despite no difference in frontal plane knee movements. Differences in passive ankle dorsiflexion range of motion yielded variations in knee and ankle kinematics during a self-selected single leg squatting task. Clinical implications of removing posterior ankle restraints and using the knee as a guide to illustrate changes at the hip may result in inaccurate screening of lumbopelvic stability. The relationship between sagittal plane lower limb kinematics and hip strength may illustrate that self-selected squat depth may presumably be a useful predictor of the lumbopelvic stability. Further research in this area is required.