977 resultados para Reator continuamente agitado


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Um leito de gaseificação de pequena escala foi projetado, construído e operado com o objetivo de investigar os parâmetros que influenciam o processo de gaseificação de um leito fixo de caroço de açaí. O reator é do tipo topo aberto downdraft estratificado, de dimensões de 15 cm de diâmetro interno por 1,5 m de altura, com isolamento térmico. O gás produzido foi coletado a jusante do leito de gaseificação e condensado para remoção de alcatrão, o qual foi posteriormente quantificado em titulador Karl Fisher. Após remoção do alcatrão o gás foi introduzido em um Micro GC para quantificação dos percentuais molares de H2, CO, N2 e CH4. O perfil de temperatura do leito foi medido com termopares tipo K posicionados ao longo do eixo longitudinal do leito em distâncias de 10 cm. A vazão de ar foi medida com auxilio de um tubo de Pitot e um micromanômetro. As aquisições dos dados de temperatura foram feitas por um data logger e vazão mássica do ar sendo feita usando comunicação RS232 do micromanômetro. Os procedimentos experimentais foram feitos ao longo de 4 horas de operação do leito de gaseificação, com consumo médio de biomassa de 1,6 kg/h, com 6 dados do perfil de temperatura, vazão mássica de ar, perda de carga do leito e concentração dos gases obtidos no processo de gaseificação e quantificação do teor de alcatrão condensável presente no gás. Verificou-se que o gaseificador de leito de açaí pode ser operado através de uma gama bastante ampla de taxas de fluxo de ar de 2 a 5 kg/h, com a quantidade de energia do gás produzido variando de 5 a 15 MJ/h. As concentrações típicas dos gases obtidos no leito foram de 13% de H2, 11% de CO, 1,3% de CH4. A eficiência máxima de gás frio de 57% e teor médio de alcatrão de 155 g/m3.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Civil - FEIS

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The volume of liquid effluent generated in cattle slaughterhouses is quite high and cannot be released untreated in water bodies due to its high pollution load of predominantly organic origin. To minimize the environmental impacts of its industrial wastewater and meet the local environmental legislation, abattoirs shall make the treatment of these effluents. The present work aims to develop the study of a reactor by sequential batch pilot scale, in order to optimize their performance in treating wastewater from a cattle slaughterhouse. The treatment system used was developed and installed in the Laboratory of Wastewater Treatment, in Faculty of Science and Technology UNESP, Presidente Prudente campus. The procedure used followed the operation of sequential batch reactors, in which all processes and treatment operations occurring sequentially in a single unit, by establishing specific operating cycles, which comprise the following separated phases: aerobic reaction, anoxic reaction, sedimentation and emptying. Aiming to improve the quality of treatment was planned the addition of coagulant Poly Aluminum Chloride (PAC) in the reactor, by determining their optimal dosage by Jar-test trials. Were prepared four steps with specific operating cycles: step one or acclimatization (10 hour of aeration, one hour and 30 minutes of sedimentation and 30 minutes for exchanging the effluent); step 2 (6 hours of aeration or aerobic phase, 4 hours and 45 minutes of stirring or anoxic phase and 1 hour and 15 minutes for sedimentation and exchange effluent); step 3 (2 hours and 30 minutes of aeration, 8 hours and 15 minutes of stirring and 1 hour and 15 minutes for sedimentation and exchange) and step 4 (2 hours of aeration, 8 hours and 45 minutes of stirring and 1 hour and 15 minutes for sedimentation and exchange)... (Complete abstract click electronic access below)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This research aims at the study of treatment of clothes washing water through biological treatment, for the purpose of evaluating the reduction of phosphorus to make it suitable for a posterior treatment of physical-chemical. For this purpose it was employed a sequencing batch reactor, consisting of aerobic and anaerobic phases. During the project it was verified not only the reduction of phosphorus (removal of 30 to 50%) but also the reduction of BOD, COD, Turbidity and Nitrate (removal of 38 to 36%, 34 to 41%, 72,3 to 75% and 57,8 to 60% respectively), which demonstrates that the proposed treatment can assist advanced treatments of water for its non potable reuse

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Brazil has one of the largest cattle herds in the world, so the cattle slaughter is one of the most important economic activities in the Brazilian market. But this activity requires a high demand of water, resulting in serious problems about the correct disposal of wastewater generated in the process. This effluent has a high pollution load, becoming its receiving bodies (streams and rivers) unfit for various activities such as public water supply, recreation, fisheries. To minimize the environmental impacts of its industrial wastewater and fallow the local environmental legislation, refrigerators must make the treatment of these effluents. This study aimed to verify the efficiency of a enzymatic reactor, when occur hydrolysis of lipids present in the effluent industrial of an cattle slaughter industry. The treatment system used was composed of two separate reactors: one being the anaerobic fluidized bed reactor (AFBR), inoculated with immobilized enzymes on the matrix support, and the other by sequential batch reactor (SBR) inoculated with activated sludge. Whereas, the reactors have been developed and installed at the Wastewater Treatment Laboratory, Faculdade de Ciências e Tecnologia, UNESP, campus Presidente Prudente. The procedure operating occurred differently for each reactor: preparation and inoculation of enzyme granules, filling the reactor, hydrolysis, and AFBR emptying, filling, aerobic reaction, sedimentation, and emptying the SBR. We performed three experimental stages, with the first and second stage of the work were done reactor analyzes separately, and the third step of the analysis were made with the interconnected reactors... (Complete abstract electronic access below)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Water and soil pollution caused by the waste from the swine production causes severe environmental impacts in producing areas. An efficient alternative to reduce these impacts can be the use of high-rate anaerobic reactors. In this work, it was evaluated the effect of the swine wastewater with total suspended solids concentrations around 6.000 mg.L-1 in the anaerobic baffled reactor with three compartments. The volume of the first compartment was 210 L and of the second and third ones of 160 L. The anaerobic baffled reactor was submitted at hydraulic detention times of 56, 28 and 18 hours and to organic load rates of 5.0 to 10.1 g total COD (L.d)(-1). The highest total COD removals, of 42 to 68%, and volumetric methane productions, of 0.261 to 0.454 L CH4 (L reactor d)(-1), occurred in the second compartment.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O presente trabalho foi desenvolvido no Centro de Raízes e Amidos Tropicais – CERAT, Na UNESP em Botucatu, estado de São Paulo onde foram realizados ensaios de fermentação alcoólica com hidrolisado de amido de mandioca. A fécula de mandioca foi utilizada como fonte de carboidrato para obtenção dos açúcares redutores consumidos no processo. Em um reator agitado foi produzido 12Kg de hidrolisado a partir de suspensão de fécula a 30% (p/p) utilizando enzimas alfa amilase na primeira etapa, seguida de amiloglucosidase na etapa posterior. As dosagens em unidades enzimáticas foram 2KNU.g-1 de amido e 2AGU.g-1 de amido respectivamente. O planejamento experimental considerou a realização de três ensaios de hidrolisados e três ensaios de fermentação a partir do mosto produzido; a) mosto aerado; b) com microaeração; c) em meio anaeróbio. Os ensaios foram realizados em erlenmeyers com 2,5 Kg de hidrolisado, ajustado a concentração de glicose a 100g.L-1 sendo inoculada a levedura do gênero Saccharomyces cerevisiae à taxa de 1,5% (p/p). Todos os erlenmeyers foram colocados sob agitação orbital e temperatura controlada de 30ºC sendo acompanhado o processo de fermentação através de coleta de amostras do mosto a cada hora. A aeração nos frascos erlenmeyers foi realizada através de mangueira coletora de válvula que regulava a vazão de ar. De acordo com os dados obtidos pode se concluir que o sistema anaeróbio em 32h foi o mais eficiente para a produção de etanol. Também foi possível observar que enquanto ocorre aeração no meio não se observa alteração significativa na concentração de etanol e quando cessa a aeração o meio torna se anaeróbio e tem início a produção de etanol. Quando aumenta a concentração de etanol no meio, o crescimento celular do sistema anaeróbio cai e etanol inibe a levedura, parando o crescimento celular.